Editing Hardware Registers

Jump to navigation Jump to search
Warning: You are not logged in. Your IP address will be publicly visible if you make any edits. If you log in or create an account, your edits will be attributed to your username, along with other benefits.

The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then publish the changes below to finish undoing the edit.

Latest revision Your text
Line 1: Line 1:
= Introduction =
= 0xBC000000 - 0xBC100000 =
 
With the exception of interrupts, almost all the interaction with the PSP hardware is done through memory mapped IO (MMIO) accesses in the 0xBC000000~0xBFFFFFFF address range. The physical address of this range is actually 0x1C000000~0x1FFFFFFF, but we must OR in the 0x40000000 un-cached flag and the 0x80000000 kernel access flag. Knowing how to communicate with the hardware is vital to understanding the inner workings of the PSP.
 
= 0xA7F00000: L2 cache =
 
If we believe in the sysmem NIDs, 04g+ seem to have a "L2" cache we can send commands (writeback/invalidate/probe) to through this address.
 
0xA7F80020 and 0xA7F80000~ also exist.
 
TODO need more info.
 
= 0xBC000000: Memory management =


{| class="wikitable sortable"
{| class="wikitable sortable"
Line 17: Line 5:
! Physical Address !! Size !! R/W !! Description
! Physical Address !! Size !! R/W !! Description
|-
|-
| 0xBC000000 || 4 || RW || Memory Protection 0x08000000 -> 0x081FFFFFF
| 0xBC000000 || 4 || RW || Memory Protection 0x08000000 -> 0x081FFFFFF  
 
Bit 0: 0x08000000 -> 0x08003FFFF User Read Enable
 
Bit 1: 0x08000000 -> 0x08003FFFF User Write Enable
 
Bit 2: 0x08000000 -> 0x08003FFFF Kernel Read Enable
 
Bit 3: 0x08000000 -> 0x08003FFFF Kernel Write Enable
 
Bit 4: 0x08040000 -> 0x0807FFFFF User Read Enable
 
Bit 5: 0x08040000 -> 0x0807FFFFF User Write Enable
 
Bit 6: 0x08040000 -> 0x0807FFFFF Kernel Read Enable
 
Bit 7: 0x08040000 -> 0x0807FFFFF Kernel Write Enable
 
Bit 8: 0x08080000 -> 0x080BFFFFF User Read Enable
 
Bit 9: 0x08080000 -> 0x080BFFFFF User Write Enable
 
Bit 10: 0x08080000 -> 0x080BFFFFF Kernel Read Enable
 
Bit 11: 0x08080000 -> 0x080BFFFFF Kernel Write Enable
 
Bit 12: 0x080C0000 -> 0x080FFFFFF User Read Enable
 
Bit 13: 0x080C0000 -> 0x080FFFFFF User Write Enable
 
Bit 14: 0x080C0000 -> 0x080FFFFFF Kernel Read Enable
 
Bit 15: 0x080C0000 -> 0x080FFFFFF Kernel Write Enable
 
Bit 16: 0x08100000 -> 0x0813FFFFF User Read Enable
 
Bit 17: 0x08100000 -> 0x0813FFFFF User Write Enable
 
Bit 18: 0x08100000 -> 0x0813FFFFF Kernel Read Enable
 
Bit 19: 0x08100000 -> 0x0813FFFFF Kernel Write Enable
 
Bit 20: 0x08140000 -> 0x0817FFFFF User Read Enable
 
Bit 21: 0x08140000 -> 0x0817FFFFF User Write Enable
 
Bit 22: 0x08140000 -> 0x0817FFFFF Kernel Read Enable
 
Bit 23: 0x08140000 -> 0x0817FFFFF Kernel Write Enable
 
Bit 24: 0x08180000 -> 0x081BFFFFF User Read Enable
 
Bit 25: 0x08180000 -> 0x081BFFFFF User Write Enable
 
Bit 26: 0x08180000 -> 0x081BFFFFF Kernel Read Enable
 
Bit 27: 0x08180000 -> 0x081BFFFFF Kernel Write Enable
 
Bit 28: 0x081C0000 -> 0x081FFFFFF User Read Enable
 
Bit 29: 0x081C0000 -> 0x081FFFFFF User Write Enable
 
Bit 30: 0x081C0000 -> 0x081FFFFFF Kernel Read Enable
 
Bit 31: 0x081C0000 -> 0x081FFFFFF Kernel Write Enable
|-
| 0xBC000004 || 4 || RW || Memory Protection 0x08200000 -> 0x083FFFFFF
Bit 0: 0x08200000 -> 0x08203FFFF User Read Enable
 
Bit 1: 0x08200000 -> 0x08203FFFF User Write Enable
 
Bit 2: 0x08200000 -> 0x08203FFFF Kernel Read Enable
 
Bit 3: 0x08200000 -> 0x08203FFFF Kernel Write Enable
 
Bit 4: 0x08240000 -> 0x0827FFFFF User Read Enable
 
Bit 5: 0x08240000 -> 0x0827FFFFF User Write Enable
 
Bit 6: 0x08240000 -> 0x0827FFFFF Kernel Read Enable
 
Bit 7: 0x08240000 -> 0x0827FFFFF Kernel Write Enable
 
Bit 8: 0x08280000 -> 0x082BFFFFF User Read Enable
 
Bit 9: 0x08280000 -> 0x082BFFFFF User Write Enable
 
Bit 10: 0x08280000 -> 0x082BFFFFF Kernel Read Enable
 
Bit 11: 0x08280000 -> 0x082BFFFFF Kernel Write Enable
 
Bit 12: 0x082C0000 -> 0x082FFFFFF User Read Enable
 
Bit 13: 0x082C0000 -> 0x082FFFFFF User Write Enable
 
Bit 14: 0x082C0000 -> 0x082FFFFFF Kernel Read Enable
 
Bit 15: 0x082C0000 -> 0x082FFFFFF Kernel Write Enable
 
Bit 16: 0x08300000 -> 0x0833FFFFF User Read Enable
 
Bit 17: 0x08300000 -> 0x0833FFFFF User Write Enable
 
Bit 18: 0x08300000 -> 0x0833FFFFF Kernel Read Enable
 
Bit 19: 0x08300000 -> 0x0833FFFFF Kernel Write Enable
 
Bit 20: 0x08340000 -> 0x0837FFFFF User Read Enable
 
Bit 21: 0x08340000 -> 0x0837FFFFF User Write Enable
 
Bit 22: 0x08340000 -> 0x0837FFFFF Kernel Read Enable
 
Bit 23: 0x08340000 -> 0x0837FFFFF Kernel Write Enable
 
Bit 24: 0x08380000 -> 0x083BFFFFF User Read Enable
 
Bit 25: 0x08380000 -> 0x083BFFFFF User Write Enable
 
Bit 26: 0x083C0000 -> 0x083BFFFFF Kernel Read Enable
 
Bit 27: 0x083C0000 -> 0x083BFFFFF Kernel Write Enable
 
Bit 28: 0x083C0000 -> 0x083FFFFFF User Read Enable
 
Bit 29: 0x083C0000 -> 0x083FFFFFF User Write Enable
 
Bit 30: 0x083C0000 -> 0x083FFFFFF Kernel Read Enable
 
Bit 31: 0x083C0000 -> 0x083FFFFFF Kernel Write Enable
|-
| 0xBC000008 || 4 || RW || Memory Protection 0x08400000 -> 0x085FFFFFF
 
Bit 0: 0x08400000 -> 0x08403FFFF User Read Enable
 
Bit 1: 0x08400000 -> 0x08403FFFF User Write Enable
 
Bit 2: 0x08400000 -> 0x08403FFFF Kernel Read Enable
 
Bit 3: 0x08400000 -> 0x08403FFFF Kernel Write Enable
 
Bit 4: 0x08440000 -> 0x0847FFFFF User Read Enable
 
Bit 5: 0x08440000 -> 0x0847FFFFF User Write Enable
 
Bit 6: 0x08440000 -> 0x0847FFFFF Kernel Read Enable
 
Bit 7: 0x08440000 -> 0x0847FFFFF Kernel Write Enable
 
Bit 8: 0x08480000 -> 0x084BFFFFF User Read Enable
 
Bit 9: 0x08480000 -> 0x084BFFFFF User Write Enable
 
Bit 10: 0x08480000 -> 0x084BFFFFF Kernel Read Enable
 
Bit 11: 0x08480000 -> 0x084BFFFFF Kernel Write Enable
 
Bit 12: 0x084c0000 -> 0x084FFFFFF User Read Enable
 
Bit 13: 0x084c0000 -> 0x084FFFFFF User Write Enable
 
Bit 14: 0x084c0000 -> 0x084FFFFFF Kernel Read Enable
 
Bit 15: 0x084c0000 -> 0x084FFFFFF Kernel Write Enable
 
Bit 16: 0x08500000 -> 0x0853FFFFF User Read Enable
 
Bit 17: 0x08500000 -> 0x0853FFFFF User Write Enable
 
Bit 18: 0x08500000 -> 0x0853FFFFF Kernel Read Enable
 
Bit 19: 0x08500000 -> 0x0853FFFFF Kernel Write Enable
 
Bit 20: 0x08540000 -> 0x0857FFFFF User Read Enable
 
Bit 21: 0x08540000 -> 0x0857FFFFF User Write Enable
 
Bit 22: 0x08540000 -> 0x0857FFFFF Kernel Read Enable
 
Bit 23: 0x08540000 -> 0x0857FFFFF Kernel Write Enable
 
Bit 24: 0x08580000 -> 0x085BFFFFF User Read Enable
 
Bit 25: 0x08580000 -> 0x085BFFFFF User Write Enable
 
Bit 26: 0x08580000 -> 0x085BFFFFF Kernel Read Enable
 
Bit 27: 0x08580000 -> 0x085BFFFFF Kernel Write Enable
 
Bit 28: 0x085c0000 -> 0x085FFFFFF User Read Enable
 
Bit 29: 0x085c0000 -> 0x085FFFFFF User Write Enable
 
Bit 30: 0x085c0000 -> 0x085FFFFFF Kernel Read Enable
 
Bit 31: 0x085c0000 -> 0x085FFFFFF Kernel Write Enable
|-
| 0xBC00000C || 4 || RW || Memory Protection 0x08600000 -> 0x087FFFFFF
 
Bit 0: 0x08600000 -> 0x08603FFFF User Read Enable
 
Bit 1: 0x08600000 -> 0x08603FFFF User Write Enable
 
Bit 2: 0x08600000 -> 0x08603FFFF Kernel Read Enable
 
Bit 3: 0x08600000 -> 0x08603FFFF Kernel Write Enable
 
Bit 4: 0x08640000 -> 0x0867FFFFF User Read Enable
 
Bit 5: 0x08640000 -> 0x0867FFFFF User Write Enable
 
Bit 6: 0x08640000 -> 0x0867FFFFF Kernel Read Enable
 
Bit 7: 0x08640000 -> 0x0867FFFFF Kernel Write Enable
 
Bit 8: 0x08680000 -> 0x086BFFFFF User Read Enable
 
Bit 9: 0x08680000 -> 0x086BFFFFF User Write Enable
 
Bit 10: 0x08680000 -> 0x086BFFFFF Kernel Read Enable
 
Bit 11: 0x08680000 -> 0x086BFFFFF Kernel Write Enable
 
Bit 12: 0x086c0000 -> 0x086FFFFFF User Read Enable
 
Bit 13: 0x086c0000 -> 0x086FFFFFF User Write Enable
 
Bit 14: 0x086c0000 -> 0x086FFFFFF Kernel Read Enable
 
Bit 15: 0x086c0000 -> 0x086FFFFFF Kernel Write Enable
 
Bit 16: 0x08700000 -> 0x0873FFFFF User Read Enable
 
Bit 17: 0x08700000 -> 0x0873FFFFF User Write Enable
 
Bit 18: 0x08700000 -> 0x0873FFFFF Kernel Read Enable
 
Bit 19: 0x08700000 -> 0x0873FFFFF Kernel Write Enable
 
Bit 20: 0x08740000 -> 0x0877FFFFF User Read Enable
 
Bit 21: 0x08740000 -> 0x0877FFFFF User Write Enable
 
Bit 22: 0x08740000 -> 0x0877FFFFF Kernel Read Enable
 
Bit 23: 0x08740000 -> 0x0877FFFFF Kernel Write Enable
 
Bit 24: 0x08780000 -> 0x087BFFFFF User Read Enable
 
Bit 25: 0x08780000 -> 0x087BFFFFF User Write Enable
 
Bit 26: 0x08780000 -> 0x087BFFFFF Kernel Read Enable
 
Bit 27: 0x08780000 -> 0x087BFFFFF Kernel Write Enable
 
Bit 28: 0x087c0000 -> 0x087FFFFFF User Read Enable
 
Bit 29: 0x087c0000 -> 0x087FFFFFF User Write Enable
 
Bit 30: 0x087c0000 -> 0x087FFFFFF Kernel Read Enable
 
Bit 31: 0x087c0000 -> 0x087FFFFFF Kernel Write Enable
|-
| 0xBC000030 || 32 || RW || Hardware register user read/write enable (range unknown). Used to access profiler from an user.
 
Granularity that this (and the next ones) work on is not known.
 
For each 1 bit an IO range is exposed to usermode for Read/Write.
 
To find the usermode address, subtract 0x60000000 from the kernelmode one (ie start addresses with 0x5 instead of 0xB).
 
It may be 2 bits for user read/write for each range of size 0x100000. For the profiler, located at 0xBC400000, the mask 0x300 is applied.
|-
| 0xBC000034 || 32 || RW || Hardware register user read/write enable (range unknown)
|-
| 0xBC000038 || 32 || RW || Hardware register user read/write enable (range unknown)
|-
| 0xBC00003C || 32 || RW || Hardware register user read/write enable (range unknown)
|-
| 0xBC000040 || 32 || RW || Hardware register user read/write enable (range unknown)
|-
| 0xBC000044 || 32 || RW || Hardware register user read/write enable (range unknown)
|-
| 0xBC000048 || 32 || RW || Set 1 to disable extended memory partitions??
|-
| 0xBC00004C || 32 || R? || Unknown
|-
| 0xBC000050 || 32 || ? || Reads 0x07EFFFFF
|-
|-
|}
|}


= 0xBC100000: System Controller =
{| class="wikitable sortable"
 
{| class="wikitable"
|-
! Address
! Size
! Read/write
! Description
|-
| 0xBC100000 || 4 || RW || NMI enable mask
 
Bits 0-15 = user NMI enable mask?
 
Bits 16-31 = kernel NMI enable mask?
|-
| 0xBC100004 || 4 || RW || NMI flags (15 bits for NMI0 ~ NMI15)
|-
|-
| 0xBC10000C || 4 || RW? || NMI12 control registers?
! Bit(s) !! Usage
|-
|-
| 0xBC100010 || 4 || RW? || NMI8 control registers?
| 31 || 0x081C0000 -> 0x081FFFFFF Kernel Write Enable
|-
|-
| 0xBC100014 || 4 || RW? || NMI9 control registers?
| 30 || 0x081C0000 -> 0x081FFFFFF Kernel Read Enable
|-
|-
| 0xBC100018 || 4 || RW? || NMI7 control registers?
| 29 || 0x081C0000 -> 0x081FFFFFF User Write Enable
|-
|-
| 0xBC10001C || 4 || RW? || NMI6 control registers?
| 28 || 0x081C0000 -> 0x081FFFFFF User Read Enable
|-
|-
| 0xBC100020 || 4 || RW? || NMI5 control registers?
| 27 || 0x08180000 -> 0x081BFFFFF Kernel Write Enable
|-
|-
| 0xBC100024 || 4 || RW? || NMI4 control registers?
| 26 || 0x08180000 -> 0x081BFFFFF Kernel Read Enable
|-
|-
| 0xBC100028 || 4 || RW? || NMI3 control registers?
| 25 || 0x08180000 -> 0x081BFFFFF User Write Enable
|-
|-
| 0xBC10002C || 4 || RW? || NMI2 control registers?
| 24 || 0x08180000 -> 0x081BFFFFF User Read Enable
|-
|-
| 0xBC100030 || 4 || RW? || NMI1 control registers?
| 23 || 0x08140000 -> 0x0817FFFFF Kernel Write Enable
|-
|-
| 0xBC100034 || 4 || RW? || NMI0 control registers?
| 22 || 0x08140000 -> 0x0817FFFFF Kernel Read Enable
|-
| 0xBC10003C || 4 || RW || Unknown - used by sceSysreg_driver_0x4841B2D2, sceSysreg_driver_0x4E5C86AA, sceSysregDoTimerEvent
|-
| 0xBC100040 || 4 || RW || Bits 0-1 = RAM size (0=16MB, 1=32MB, 2=64MB, 3=128MB)
 
Bit 11 = ? (read-only)
 
Bits 24-31 = tachyon version
|-
| 0xBC100044 || 4 || RW || SC/ME RPC interrupt. Writing 1 to bit 0 posts an interrupt to the opposite CPU
|-
| 0xBC100048 || 4 || RW || SC/ME semaphore. Appears to be a shared lock for both CPUs. Can be used as a spinlock
|-
| 0xBC10004C || 4 || RW || Reset enable (set bit to assert RESET, clear to clear RESET)
 
Bit 0 = Top
 
Bit 1 = SC
 
Bit 2 = ME
 
Bit 3 = AW
 
Bit 4 = VME
 
Bit 5 = AVC
 
Bit 6 = USB
 
Bit 7 = ATA
 
Bits 8-9 = Memstick Interface
 
Bit 10 = KIRK
 
Bit 12 = ATA HDD
 
Bit 13 = USB Host
 
Bits 14-15 = Memstick related?
 
Bit 16 = ?
|-
| 0xBC100050 || 4 || RW || Bus clock enable (set a bit to enable clocking to the device, clear it to disable clocking)
 
Bit 0 = ME
 
Bit 1 = AW RegA Bus
 
Bit 2 = AW RegB Bus
 
Bit 3 = AW Edram Bus
 
Bit 4 = DMACPlus
 
Bits 5-6 = DMAC
 
Bit 7 = KIRK
 
Bit 8 = ATA
 
Bit 9 = USB
 
Bits 10-11 = Memstick Interface
 
Bit 12 = NAND (EMCDDR)
 
Bit 13 = NAND (EMCSM)
 
Bit 14 = APB (?)
 
Bits 15-16 = Audio
 
Bit 17 = ATA HDD
 
Bit 18 = USB host
 
Bits 19-20 = ?
|-
|-
| 0xBC100054 || 4 || RW || Clock enable
| 21 || 0x08140000 -> 0x0817FFFFF User Write Enable
 
Bit 0 = ATA
 
Bit 1 = ATA HDD
 
Bit 4 = USB
 
Bit 7 = ?
 
Bits 8-9 = Memstick interface
 
Bit 12 = EMCDDR (NAND)
 
Bit 16 = USB host
 
Bits 20-21 = ?
 
Bit 22 = ?
|-
|-
| 0xBC100058 || 4 || RW || Clock enable
| 20 || 0x08140000 -> 0x0817FFFFF User Read Enable
 
Bits 0-5 = SPI 0-5
 
Bits 6-11 = UART 0-5
 
Bits 12-15 = APB (Arm Peripheral Bus) Timer 0-3
 
Bits 16-17 = Audio 0-1
 
Bits 18 = LCD Controller
 
Bits 19 = PWM
 
Bits 20 = ?
 
Bits 21 = I2C
 
Bit 22 = SIRCS (Sony Serial Infra-Red Control)
 
Bit 23 = GPIO
 
Bit 24 = Audio clock out
 
Bit 25 = ?
|-
|-
| 0xBC10005C || 4 || RW || Clock select
| 19 || 0x08100000 -> 0x0813FFFFF Kernel Write Enable
 
Bits 0-1 = 1st Memorystick interface
 
Bits 2-3 = 2nd Memorystick interface
 
Bits 4-5 = ATA HDD
 
Bits 6-7 = ATA
|-
|-
| 0xBC100060 || 4 || RW || Clock select
| 18 || 0x08100000 -> 0x0813FFFFF Kernel Read Enable
 
Bits 0-2 = APB timer 0
 
Bits 4-6 = APB timer 1
 
Bits 8-10 = APB timer 2
 
Bits 12-14 = APB timer 3
 
Bit 18 = Audio clock out
 
Bit 24 = ?
 
|-
|-
| 0xBC100064 || 4 || RW || SPI clock select
| 17 || 0x08100000 -> 0x0813FFFFF User Write Enable
|-
|-
| 0xBC100068 || 4 || RW || Bits 0-7: PLL frequency
| 16 || 0x08100000 -> 0x0813FFFFF User Read Enable
 
Bits 16-31: unknown, checked against by the iplloader, possibly related to jigkick
|-
|-
| 0xBC100070 || 4 || RW || Set Avc power
| 15 || 0x080C0000 -> 0x080FFFFFF Kernel Write Enable
|-
|-
| 0xBC100074 || 4 || RW || Unknown
| 14 || 0x080C0000 -> 0x080FFFFFF Kernel Read Enable
|-
|-
| 0xBC100078 || 4 || RW || I/O enable
| 13 || 0x080C0000 -> 0x080FFFFFF User Write Enable
 
Bit 1 = EMCSM
 
Bit 2 = USB
 
Bit 3 = ATA
 
Bits 4-5 = MSIF
 
Bit 6 = LCDC
 
Bits 7-8 = Audio
 
Bit 9 = I2c
 
Bit 10 = Sircs
 
Bit 11 = AudioClkout
 
Bit 12 = Key (?)
 
Bit 13 = PWM
 
Bit 14 = ATA HDD
 
Bit 15 = TBD - needs more sysreg reversing
 
Bits 16-21 = UART 0-5
 
Bits 22-23 = TBD - needs more sysreg reversing
 
Bits 24-29 = SPI 0-5
 
Bits 30-31 = TBD - needs more sysreg reversing
 
|-
|-
| 0xBC10007C || 4 || RW || Either GPIO pin enable, or GPIO pin direction
| 12 || 0x080C0000 -> 0x080FFFFFF User Read Enable
|-
|-
| 0xBC100080 || 4 || RW ||
| 11 || 0x08080000 -> 0x080BFFFFF Kernel Write Enable
 
Bit 0 = USB connect status
 
Bits 1-3 = USB interrupt
 
Bits 4-7: MemoryStick0 connect intr
 
Bits 8-11: MemoryStick1 connect intr
|-
|-
| 0xBC100088 || 4 || RW || NMI13 control register?
| 10 || 0x08080000 -> 0x080BFFFFF Kernel Read Enable
|-
|-
| 0xBC100090 || 4 || R? || Related to fuse Id
| 9 || 0x08080000 -> 0x080BFFFFF User Write Enable
|-
|-
| 0xBC100094 || 4 || R? || Related to fuse Id
| 8 || 0x08080000 -> 0x080BFFFFF User Read Enable
|-
|-
| 0xBC100098 || 4 || R? || Related to fuse config
| 7 || 0x08040000 -> 0x0807FFFFF Kernel Write Enable
|-
|-
| 0xBC1000A0 || 4 || RW || NMI10 control register?
| 6 || 0x08040000 -> 0x0807FFFFF Kernel Read Enable
|-
|-
| 0xBC1000A4 || 4 || RW || NMI11 control register?
| 5 || 0x08040000 -> 0x0807FFFFF User Write Enable
|-
|-
| 0xBC1000B0 || 4 || RW || Bits 0-2 = USB host intr
| 4 || 0x08040000 -> 0x0807FFFFF User Read Enable
|-
|-
| 0xBC1000E0 || 4 || RW || NMI14 control register?
| 3 || 0x08000000 -> 0x08003FFFF Kernel Write Enable
|-
|-
| 0xBC1000E4 || 4 || RW || NMI15 control register?
| 2 || 0x08000000 -> 0x08003FFFF Kernel Read Enable
|-
|-
| 0xBC1000E8 || 4 || RW || Unknown
| 1 || 0x08000000 -> 0x08003FFFF User Write Enable
|-
|-
| 0xBC100100 || 4 || RW || Unknown
| 0 || 0x08000000 -> 0x08003FFFF User Read Enable
|-
|-
|}
|}


= 0xBC200000: CPU/bus frequency =
{| class="wikitable sortable"
 
{| class="wikitable"
|-
|-
! Address
! Physical Address !! Size !! R/W !! Description
! Size
! Read/write
! Description
|-
|-
| 0xBC200000 || 4 || RW || CPU frequency
| 0xBC000004 || 4 || RW || Memory Protection 0x08200000 -> 0x083FFFFFF
 
Bits 0-8 = denominator
 
Bits 16-24 = numerator
 
|-
|-
| 0xBC200004 || 4 || RW || Bus frequency (same bits as above)
|}
|}


= 0xBC300000: Interrupt Manager =
{| class="wikitable sortable"
 
{| class="wikitable"
|-
! Address
! Size
! Read/write
! Description
|-
| 0xBC300000 || 4 || RW || Flags for the unmasked interrupts out of the first 32 interrupts (see below for the list of interrupts)
|-
| 0xBC300004 || 4 || RW || Flags for the first 32 interrupts
|-
| 0xBC300008 || 4 || RW || Mask for the first 32 interrupts
|-
| 0xBC300010 || 4 || RW || Flags for the unmasked interrupts out of the next 32 interrupts
|-
| 0xBC300014 || 4 || RW || Flags for the next 32 interrupts
|-
| 0xBC300018 || 4 || RW || Mask for the next 32 interrupts
|-
| 0xBC300020 || 4 || RW || Flags for the unmasked interrupts out of the last 32 interrupts
|-
| 0xBC300024 || 4 || RW || Flags for the last 32 interrupts
|-
| 0xBC300028 || 4 || RW || Mask for the last 32 interrupts
|-
|}
 
{| class="wikitable"
|-
! Interrupt ID
! Description
|-
|-
| 0 || All UARTs
|-
| 1 || All SPIs
|-
| 2 || All timer expirations
|-
| 3 || All USBs
|-
| 4 || GPIO
|-
| 5 || ATA/ATAPI
|-
| 6 || UMD Manager
|-
| 7 || Memstick (MSCM0)
|-
|-
| 8 || WLAN
! Bit(s) !! Usage
|-
|-
| 9 || MG
| 31 || 0x083C0000 -> 0x083FFFFFF Kernel Write Enable
|-
|-
| 10 || AUDIO1
| 30 || 0x083C0000 -> 0x083FFFFFF Kernel Read Enable
|-
|-
| 11 || AUDIO2
| 29 || 0x083C0000 -> 0x083FFFFFF User Write Enable
|-
|-
| 12 || I2C
| 28 || 0x083C0000 -> 0x083FFFFFF User Read Enable
|-
|-
| 13 || KEY
| 27 || 0x083C0000 -> 0x083BFFFFF Kernel Write Enable
|-
|-
| 14 || IrDA (SIRS)
| 26 || 0x083C0000 -> 0x083BFFFFF Kernel Read Enable
|-
|-
| 15 || Systimer 0
| 25 || 0x08380000 -> 0x083BFFFFF User Write Enable
|-
|-
| 16 || Systimer 1
| 24 || 0x08380000 -> 0x083BFFFFF User Read Enable
|-
|-
| 17 || Systimer 2
| 23 || 0x08340000 -> 0x0837FFFFF Kernel Write Enable
|-
|-
| 18 || Systimer 3
| 22 || 0x08340000 -> 0x0837FFFFF Kernel Read Enable
|-
|-
| 19 || Thread0?
| 21 || 0x08340000 -> 0x0837FFFFF User Write Enable
|-
|-
| 20 || NAND
| 20 || 0x08340000 -> 0x0837FFFFF User Read Enable
|-
|-
| 21 || DMAC+
| 19 || 0x08300000 -> 0x0833FFFFF Kernel Write Enable
|-
|-
| 22 || DMA0
| 18 || 0x08300000 -> 0x0833FFFFF Kernel Read Enable
|-
|-
| 23 || DMA1
| 17 || 0x08300000 -> 0x0833FFFFF User Write Enable
|-
|-
| 24 || MEMLMD?
| 16 || 0x08300000 -> 0x0833FFFFF User Read Enable
|-
|-
| 25 || GE
| 15 || 0x082C0000 -> 0x082FFFFFF Kernel Write Enable
|-
|-
| 26 || USB_MAIN
| 14 || 0x082C0000 -> 0x082FFFFFF Kernel Read Enable
|-
|-
| 27 || eFlash ATA2
| 13 || 0x082C0000 -> 0x082FFFFFF User Write Enable
|-
|-
| 28 || eFlash DMA
| 12 || 0x082C0000 -> 0x082FFFFFF User Read Enable
|-
|-
| 30 || Display VSync
| 11 || 0x08280000 -> 0x082BFFFFF Kernel Write Enable
|-
|-
| 31 || MediaEngine
| 10 || 0x08280000 -> 0x082BFFFFF Kernel Read Enable
|-
|-
| 32 || UART1
| 9 || 0x08280000 -> 0x082BFFFFF User Write Enable
|-
|-
| 33 || UART2
| 8 || 0x08280000 -> 0x082BFFFFF User Read Enable
|-
|-
| 34 || UART3
| 7 || 0x08240000 -> 0x0827FFFFF Kernel Write Enable
|-
|-
| 35 || UART4
| 6 || 0x08240000 -> 0x0827FFFFF Kernel Read Enable
|-
|-
| 36 || HP Remote
| 5 || 0x08240000 -> 0x0827FFFFF User Write Enable
|-
|-
| 37 || UART6
| 4 || 0x08240000 -> 0x0827FFFFF User Read Enable
|-
|-
| 40 || SPI1
| 3 || 0x08200000 -> 0x08203FFFF Kernel Write Enable
|-
|-
| 41 || SPI2
| 2 || 0x08200000 -> 0x08203FFFF Kernel Read Enable
|-
|-
| 42 || SPI3
| 1 || 0x08200000 -> 0x08203FFFF User Write Enable
|-
|-
| 43 || SPI4
| 0 || 0x08200000 -> 0x08203FFFF User Read Enable
|-
| 44 || SPI5
|-
| 45 || SPI6
|-
| 48 || TIM1_PERI
|-
| 49 || TIM2_PERI
|-
| 50 || TIM3_PERI
|-
| 51 || TIM4_PERI
|-
| 56 || USB Resume
|-
| 57 || USB Ready
|-
| 58 || USB Connect
|-
| 59 || USB Disconnect
|-
| 60 || Memstick Insert (MSCM1)
|-
| 61 || Memstick Insert (MSCM1)
|-
| 62 || WLAN
|-
| 63 || WLAN
|-
| 64 || SOFT1
|-
| 65 || SOFT2
|-
| 66 || CPUTIMER
|-
|-
|}
|}


= 0xBC400000: Profiler =
{| class="wikitable sortable"
 
{| class="wikitable"
|-
! Address !! Size !! R/W !! Description
|-
| 0xBC400000 || 4 || RW || Profiler enable (bit 0 = enabled status)
|-
| 0xBC400004 || 4 || RW || System clock cycles
|-
| 0xBC400008 || 4 || RW || CPU clock cycles
|-
| 0xBC40000C || 4 || RW || Total stalled cycles
|-
| 0xBC400010 || 4 || RW || Internal stalled cycles
|-
| 0xBC400014 || 4 || RW || Memory stalled cycles
|-
| 0xBC400018 || 4 || RW || Coprocessor stalled cycles
|-
| 0xBC40001C || 4 || RW || VFPU stalled cycles
|-
| 0xBC400020 || 4 || RW || Sleep cycles
|-
| 0xBC400024 || 4 || RW || Bus access cycles
|-
| 0xBC400028 || 4 || RW || Uncached load count
|-
| 0xBC40002C || 4 || RW || Uncached store count
|-
| 0xBC400030 || 4 || RW || Cached load count
|-
| 0xBC400034 || 4 || RW || Cached store count
|-
| 0xBC400038 || 4 || RW || I-cache miss count
|-
| 0xBC40003C || 4 || RW || D-cache miss count
|-
| 0xBC400040 || 4 || RW || D-cache writeback count
|-
| 0xBC400044 || 4 || RW || Coprocessor 0 instruction count
|-
| 0xBC400048 || 4 || RW || FPU instruction count
|-
| 0xBC40004C || 4 || RW || VFPU instruction count
|-
| 0xBC400050 || 4 || RW || Local bus cycles
|-
|}
 
= 0xBC500000: Hardware Timer =
 
{| class="wikitable"
|-
|-
! Physical Address !! Size !! R/W !! Description
! Physical Address !! Size !! R/W !! Description
|-
|-
| 0xBC500000 || 4 || RW || Timer data for hardware timer 0. Bits 31-22: the current timer mode. Bits 21-0: The system time when the timer was stopped. It is overwritten every time the timer is stopped.
| 0xBC000008 || 4 || RW || Memory Protection 0x08400000 -> 0x085FFFFFF
|-
| 0xBC500004 || 4 ||    R? || The base time of the hardware timer 0 (assumed)
|-
| 0xBC500008 || 4 ||    RW || The numerator of the timer's prescale
|-
| 0xBC50000C || 4 ||    RW || The denominator of the timer's prescale
|-
| 0xBC500010 || 4 ||    RW || Same as above, for hardware timer 1
|-
| 0xBC500014 || 4 ||    R? || Same as above, for hardware timer 1
|-
| 0xBC500018 || 4 ||    RW || Same as above, for hardware timer 1
|-
| 0xBC50001C || 4 ||    RW || Same as above, for hardware timer 1
|-
| 0xBC500020 || 4 ||    RW || Same as above, for hardware timer 2
|-
| 0xBC500024 || 4 ||    R? || Same as above, for hardware timer 2
|-
| 0xBC500028 || 4 ||    RW || Same as above, for hardware timer 2
|-
| 0xBC50002C || 4 ||    RW || Same as above, for hardware timer 2
|-
| 0xBC500030 || 4 ||    RW || Same as above, for hardware timer 3
|-
| 0xBC500034 || 4 ||    R? || Same as above, for hardware timer 3
|-
| 0xBC500038 || 4 ||    RW || Same as above, for hardware timer 3
|-
| 0xBC50003C || 4 ||    RW || Same as above, for hardware timer 3
|-
| 0xBC500100 || 4 ||    R  || Get status read-only (?) for hardware timer 1
|-
| 0xBC500110 || 4 ||    R  || Get status read-only (?) for hardware timer 1
|-
| 0xBC500120 || 4 ||    R  || Get status read-only (?) for hardware timer 1
|-
| 0xBC500130 || 4 ||    R  || Get status read-only (?) for hardware timer 1
|-
| 0xBC5003D0 || 4 ||    RW || Same as 0xBC500000, but with the current PSP's system time value. A timer's current count is computed by subtracting the timer's base time (the init time point) from this value.
|-
| 0xBC5003E0 || 4 ||    RW || Same as above, for hardware timer 1
|-
| 0xBC5003F0 || 4 ||    RW || Same as above, for hardware timer 2
|-
| 0xBC500400 || 4 ||    RW || Same as above, for hardware timer 3
|-
|-
|}
|}


= 0xBC600000: System time =
{| class="wikitable sortable"
{| class="wikitable sortable"
|-
|-
! Physical Address !! Size !! R/W !! Description
! Bit(s) !! Usage
|-
|  0xBC600000 || 32 || RW || System time in microseconds. Wraps around every 1.1 hours?
|-
|  0xBC600004 || 32 || RW || Alarm time, raises interrupt (19?) when system time hits this number
|-
|  0xBC600008 || 32 || RW ||  Unknown, typically 0x30 but can be written
|-
|  0xBC60000C || 32 || RW ||  Unknown, typically 1 but can be written. (Writing 0 caused a hang, maybe disables timer incrementing?)
|-
|  0xBC600010 || 32 || RW ||  Unknown, typically 0
|-
|}
 
= 0xBC800000: DMACPlus =
 
== DMACPlus general registers ==
 
{| class="wikitable"
|-
! Address
! Size
! Read/write
! Description
|-
| 0xBC800004 || 4 || RW || Pending "operation success" interrupts
|-
| 0xBC800008 || 4 || RW || Clear "operation success" interrupts
|-
| 0xBC80000C || 4 || RW || Pending "operation error" interrupts
|-
| 0xBC800010 || 4 || RW || Clear "operation error" interrupts
|-
| 0xBC800014 || 4 || RW || Enable "operation success" interrupts
|-
| 0xBC800018 || 4 || RW || Enable "operation error" interrupts
|-
|}
 
=== Interrupt bits ===
{| class="wikitable"
|-
|-
! Bit
| 31 || 0x085c0000 -> 0x085FFFFFF Kernel Write Enable
! Interrupt
|-
|-
| 0 || DmacplusLcdc
| 30 || 0x085c0000 -> 0x085FFFFFF Kernel Read Enable
|-
|-
| 1 || AVC
| 29 || 0x085c0000 -> 0x085FFFFFF User Write Enable
|-
|-
| 2 || Sc2Me
| 28 || 0x085c0000 -> 0x085FFFFFF User Read Enable
|-
|-
| 3 || Me2Sc
| 27 || 0x08580000 -> 0x085BFFFFF Kernel Write Enable
|-
|-
| 4 || Sc128
| 26 || 0x08580000 -> 0x085BFFFFF Kernel Read Enable
|-
|-
|}
| 25 || 0x08580000 -> 0x085BFFFFF User Write Enable
 
== Framebuffer scanout registers (DmacplusLcdc) ==
 
{| class="wikitable"
|-
|-
! Address
| 24 || 0x08580000 -> 0x085BFFFFF User Read Enable
! Size
! Read/write
! Description
|-
|-
| 0xBC800100 || 4 || RW || Framebuffer address (bits[28:0])
| 23 || 0x08540000 -> 0x0857FFFFF Kernel Write Enable
|-
|-
| 0xBC800104 || 4 || RW || Framebuffer pixelformat (0 = RGBA8888, 1 = RGB565, 2 = RGBA5551, 3 = RGBA4444)
| 22 || 0x08540000 -> 0x0857FFFFF Kernel Read Enable
|-
|-
| 0xBC800108 || 4 || RW || Framebuffer width
| 21 || 0x08540000 -> 0x0857FFFFF User Write Enable
|-
|-
| 0xBC80010C || 4 || RW || Framebuffer stride
| 20 || 0x08540000 -> 0x0857FFFFF User Read Enable
|-
|-
| 0xBC800110 || 4 || RW || Framebuffer scanout configuration: Bit[0] = Enable framebuffer scanout to LCD controller, Bits[31:29] = ??
| 19 || 0x08500000 -> 0x0853FFFFF Kernel Write Enable
|-
|-
|}
| 18 || 0x08500000 -> 0x0853FFFFF Kernel Read Enable
 
== CSC registers ==
 
{| class="wikitable"
|-
|-
! Address
| 17 || 0x08500000 -> 0x0853FFFFF User Write Enable
! Size
! Read/write
! Description
|-
|-
| 0xBC800120 || 4 || RW || CSC source buffer pYBuffer address
| 16 || 0x08500000 -> 0x0853FFFFF User Read Enable
|-
|-
| 0xBC800124 || 4 || RW || CSC source buffer pYBuffer2 address
| 15 || 0x084c0000 -> 0x084FFFFFF Kernel Write Enable
|-
|-
| 0xBC800128 || 4 || RW || CSC source buffer pCrBuffer address
| 14 || 0x084c0000 -> 0x084FFFFFF Kernel Read Enable
|-
|-
| 0xBC80012C || 4 || RW || CSC source buffer pCbBuffer address
| 13 || 0x084c0000 -> 0x084FFFFFF User Write Enable
|-
|-
| 0xBC800130 || 4 || RW || CSC source buffer pCrBuffer2 address
| 12 || 0x084c0000 -> 0x084FFFFFF User Read Enable
|-
|-
| 0xBC800134 || 4 || RW || CSC source buffer pCbBuffer2 address
| 11 || 0x08480000 -> 0x084BFFFFF Kernel Write Enable
|-
|-
| 0xBC800138 || 4 || RW || CSC source buffer height
| 10 || 0x08480000 -> 0x084BFFFFF Kernel Read Enable
|-
|-
| 0xBC80013C || 4 || RW || CSC source buffer width
| 9 || 0x08480000 -> 0x084BFFFFF User Write Enable
|-
|-
| 0xBC800140 || 4 || RW || Buffer size: Bits[22:16] = height/16, Bits[13:8] = width/16, Bit[2] = unk, Bit[1] = unk, Bit[0] = use VME or AVC (AVC = 0, VME = 1)
| 8 || 0x08480000 -> 0x084BFFFFF User Read Enable
|-
|-
| 0xBC800144 || 4 || RW || CSC destination RGB buffer address
| 7 || 0x08440000 -> 0x0847FFFFF Kernel Write Enable
|-
|-
| 0xBC800148 || 4 || RW || CSC destination RGB2 buffer address
| 6 || 0x08440000 -> 0x0847FFFFF Kernel Read Enable
|-
|-
| 0xBC80014C || 4 || RW || CSC parameters: Bit[0] = has RGB2 buffer, Bits[7:1] = pixelformat, Bits[31:8] = buffer stride
| 5 || 0x08440000 -> 0x0847FFFFF User Write Enable
|-
|-
| 0xBC800150 || 4 || RW || First row (3 values) of the 3x3 CSC matrix. Each value is 10 bits long, Q3.7 fixed-point format, starting at bit i * 16 of the register.
| 4 || 0x08440000 -> 0x0847FFFFF User Read Enable
|-
|-
| 0xBC800154 || 4 || RW || Second row (3 values) of the 3x3 CSC matrix. Each value is 10 bits long, Q3.7 fixed-point format, starting at bit i * 16 of the register.
| 3 || 0x08400000 -> 0x08403FFFF Kernel Write Enable
|-
|-
| 0xBC800158 || 4 || RW || Third row (3 values) of the 3x3 CSC matrix. Each value is 10 bits long, Q3.7 fixed-point format, starting at bit i * 16 of the register.
| 2 || 0x08400000 -> 0x08403FFFF Kernel Read Enable
|-
|-
| 0xBC80015C || 4 || RW || Other parameters of CSC matrix (post matrix multiplication addition coefficients, etc). Bits[7:0] = footroom, Bit[8] = unk.
| 1 || 0x08400000 -> 0x08403FFFF User Write Enable
|-
|-
| 0xBC800160 || 4 || RW || Start CSC? 0xD is written here.
| 0 || 0x08400000 -> 0x08403FFFF User Read Enable
|-
|-
|}
|}


=== CSC source buffer valid ranges ===
{| class="wikitable sortable"
Note: It seems the CSC source buffer address can only be inside one of the following ranges in the following table (otherwise AVC "operation error" interrupt is triggered). The destination buffer doesn't have such limitations.
{| class="wikitable"
|-
|-
! Start
! Physical Address !! Size !! R/W !! Description
! End
! Notes
|-
| 0x00000000 || 0x00400000 ||
|-
| 0x04000000 || 0x04200000 || VRAM? always read as 0s
|-
|-
| 0x08300000 || 0x0C000000 ||
| 0xBC00000C || 4 || RW || Memory Protection 0x08600000 -> 0x087FFFFFF
|-
|-
|}
|}


== DMA processing ==
{| class="wikitable sortable"
 
{| class="wikitable"
|-
|-
! Address
! Bit(s) !! Usage
! Size
! Read/write
! Description
|-
|-
| 0xBC800180 || 4 || RW || DMA channel 0 source address
| 31 || 0x087c0000 -> 0x087FFFFFF Kernel Write Enable
|-
|-
| 0xBC800184 || 4 || RW || DMA channel 0 destination address
| 30 || 0x087c0000 -> 0x087FFFFFF Kernel Read Enable
|-
|-
| 0xBC800188 || 4 || RW || DMA channel 0 address for the next instruction (which is another source/destination/attr/status set)
| 29 || 0x087c0000 -> 0x087FFFFFF User Write Enable
|-
|-
| 0xBC80018C || 4 || RW || DMA channel 0 attributes
| 28 || 0x087c0000 -> 0x087FFFFFF User Read Enable
 
Bits 0-11: length
 
Bits 12-14: src step
 
Bits 15-17: dst step
 
Bits 18-20: src length shift
 
Bits 21-23: dst length shift
 
Bits 24-25: unknown
 
Bit 26: src increment
 
Bit 27: dst increment
 
Bit 31: trigger interrupt
|-
|-
| 0xBC800190 || 4 || RW || DMA channel 0 status
| 27 || 0x08780000 -> 0x087BFFFFF Kernel Write Enable
 
Bit 0: in progress
 
Bits 4-7: DDR value
 
Bit 8: DDR required
|-
|-
| 0xBC8001A0 || 20 || RW || Same as above, for DMA channel 1
| 26 || 0x08780000 -> 0x087BFFFFF Kernel Read Enable
|-
|-
| 0xBC8001C0 || 20 || RW || Same as above, for DMA channel 2
| 25 || 0x08780000 -> 0x087BFFFFF User Write Enable
|-
|-
|}
| 24 || 0x08780000 -> 0x087BFFFFF User Read Enable
 
= 0xBC900000 & 0xBCA00000: DMAC =
 
TODO: this could be the same as 0xBC800000, just for more processors (8 for 0xBC900000, 8 for 0xBCA00000)
 
{| class="wikitable"
|-
|-
! Address !! Size !! R/W !! Description
| 23 || 0x08740000 -> 0x0877FFFFF Kernel Write Enable
|-
|-
| 0xBC900020 || 4 || W? || Unknown (DMA soft request-related)
| 22 || 0x08740000 -> 0x0877FFFFF Kernel Read Enable
|-
|-
| 0xBC900024 || 4 || W? || Unknown (DMA soft request-related)
| 21 || 0x08740000 -> 0x0877FFFFF User Write Enable
|-
|-
| 0xBC900028 || 4 || W? || Unknown (DMA soft request-related)
| 20 || 0x08740000 -> 0x0877FFFFF User Read Enable
|-
|-
| 0xBC90002C || 4 || W? || Unknown (DMA soft request-related)
| 19 || 0x08700000 -> 0x0873FFFFF Kernel Write Enable
|-
|-
| 0xBC900100 || 4 || RW || DMA channel 0 status
| 18 || 0x08700000 -> 0x0873FFFFF Kernel Read Enable
 
Bit 0 = ?
 
Bit 1 = reads 1 when channel reset/reboot in complete
 
Bit 2 = write 1 to require a reset/reboot
|-
|-
| 0xBC900108 || 4 || RW || Set to 0xFF on reboot
| 17 || 0x08700000 -> 0x0873FFFFF User Write Enable
|-
|-
| 0xBC900110 || 4 || RW || Set to 0xFF on reboot
| 16 || 0x08700000 -> 0x0873FFFFF User Read Enable
|-
|-
| 0xBC900130 || 4 || RW || Bit 0 set to 0 on reboot
| 15 || 0x086c0000 -> 0x086FFFFFF Kernel Write Enable
|-
|-
| 0xBC900120 || 32 || RW || Same as above, for DMA channel 1
| 14 || 0x086c0000 -> 0x086FFFFFF Kernel Read Enable
|-
|-
| 0xBC900140 || 32 || RW || Same as above, for DMA channel 2
| 13 || 0x086c0000 -> 0x086FFFFFF User Write Enable
|-
|-
| 0xBC900160 || 32 || RW || Same as above, for DMA channel 3
| 12 || 0x086c0000 -> 0x086FFFFFF User Read Enable
|-
|-
| 0xBC900180 || 32 || RW || Same as above, for DMA channel 4
| 11 || 0x08680000 -> 0x086BFFFFF Kernel Write Enable
|-
|-
| 0xBC9001A0 || 32 || RW || Same as above, for DMA channel 5
| 10 || 0x08680000 -> 0x086BFFFFF Kernel Read Enable
|-
|-
| 0xBC9001C0 || 32 || RW || Same as above, for DMA channel 6
| 9 || 0x08680000 -> 0x086BFFFFF User Write Enable
|-
|-
| 0xBC9001E0 || 32 || RW || Same as above, for DMA channel 7
| 8 || 0x08680000 -> 0x086BFFFFF User Read Enable
|-
|-
| 0xBCA00100 || 32 || RW || Same as above, for DMA channel 8
| 7 || 0x08640000 -> 0x0867FFFFF Kernel Write Enable
|-
|-
| 0xBCA00120 || 32 || RW || Same as above, for DMA channel 9
| 6 || 0x08640000 -> 0x0867FFFFF Kernel Read Enable
|-
|-
| 0xBCA00140 || 32 || RW || Same as above, for DMA channel 10
| 5 || 0x08640000 -> 0x0867FFFFF User Write Enable
|-
|-
| 0xBCA00160 || 32 || RW || Same as above, for DMA channel 11
| 4 || 0x08640000 -> 0x0867FFFFF User Read Enable
|-
|-
| 0xBCA00180 || 32 || RW || Same as above, for DMA channel 12
| 3 || 0x08600000 -> 0x08603FFFF Kernel Write Enable
|-
|-
| 0xBCA001A0 || 32 || RW || Same as above, for DMA channel 13
| 2 || 0x08600000 -> 0x08603FFFF Kernel Read Enable
|-
|-
| 0xBCA001C0 || 32 || RW || Same as above, for DMA channel 14
| 1 || 0x08600000 -> 0x08603FFFF User Write Enable
|-
|-
| 0xBCA001E0 || 32 || RW || Same as above, for DMA channel 15
| 0 || 0x08600000 -> 0x08603FFFF User Read Enable
|-
|-
|}
|}


= 0xBCC00000: VME Control =
Granularity that these work on is not known. For each 1 bit an IO range is exposed to usermode for Read/Write. To find the usermode address, subtract 0x60000000 from the kernelmode one.
 
{| class="wikitable sortable"
These can only be accessed from the ME CPU.
 
{| class="wikitable"
|-
|-
! Address
! Physical Address !! Size !! R/W !! Description
! Size
! Read/write
! Description
|-
| 0xBCC00010 || 4 || RW || VME reset: writing anything here causes the VME to reset; it reads 0xFFFFFFFF while resetting, and 0 when reset is complete
|-
| 0xBCC00030 || 4 || W? || Unknown, 8 is stored there when the ME boots
|-
| 0xBCC00040 || 4 || W? || Unknown, 2 is stored there when the ME boots
|-
|-
| 0xBCC00070 || 4 || W? || Unknown, 1 is stored there when the ME boots
| 0xBC000030-0xBC00004C || 32 || RW || IO Register Usermode Remap (Subtract 0x60000000)
|-
|-
|}
|}


= 0xBD000000: DDR =
= 0xBC600000 - 0xBC700000 =
 
{| class="wikitable sortable"
{| class="wikitable"
|-
|-
! Address
! Physical Address !! Size !! R/W !! Description
! Size
! Read/write
! Description
|-
|-
| 0xBD000004 || 4 || RW || DDR flush
| 0xBC600000 || 32 || RW || System time in microseconds. Wraps around every 1.1 hours?
|-
|-
| 0xBD000020 || 4 || RW || Unknown
| 0xBC600004 || 32 || RW || Alarm time, raises interrupt (19?) when system time hits this number
|-
|-
| 0xBD000024 || 4 || RW || Unknown
| 0xBC600008 || 32 || RW ||   Unknown, typically 0x30 but can be written
|-
|-
| 0xBD00002C || 4 || RW || Unknown, used by IPL
| 0xBC60000C || 32 || RW ||   Unknown, typically 1 but can be written. (Writing 0 caused a hang, maybe disables timer incrementing?)
|-
|-
| 0xBD000030 || 4 || RW || Unknown, used during sceDdrChangePllClock()
| 0xBC600010 || 32 || RW ||   Unknown, typically 0
|-
| 0xBD000034 || 4 || RW || Unknown, used during sceDdrChangePllClock()
|-
| 0xBD000038 || 4 || RW || Unknown, used by IPL
|-
| 0xBD000040 || 4 || RW || Unknown, used during sceDdrChangePllClock()
|-
| 0xBD000044 || 4 || RW || Unknown, used during sceDdrChangePllClock()
|-
|-
|}
|}


= 0xBD100000: NAND Flash =
= 0xBC600000 - 0xBC700000 =
 
{| class="wikitable sortable"
{| class="wikitable"
|-
! Address
! Size
! Read/write
! Description
|-
| 0xBD101000 || 4 || R || NAND control
 
Bit 16 = read ECC (0 = don't calculate, 1 = calculate)
 
Bit 17 = write ECC (0 = don't calculate, 1 = calculate)
|-
| 0xBD101004 || 4 || R || NAND status
 
Bit 0 = status (0 = busy, 1 = ready)
 
Bit 7 = write protection (1 = write protected)
|-
| 0xBD101008 || 4 || W || NAND command
 
0x00/0x01 = read (1?)
 
0x50 = read (2?)
 
0x90 = read ID
 
0xFF = reset
 
0x80, or 0x10 at 2nd cycle = page program
 
0x00, or 0x8A at 2nd cycle = copy-back program
 
0x60, or 0xD0 at 2nd cycle = block erase
 
0x70 = read status
|-
| 0xBD10100C || 4 || W || NAND address.
 
Bits 10-26: page to access.
 
Possibly just LBA >> 1?
|-
| 0xBD101014 || 4 || W || NAND reset? (bit 0)
|-
| 0xBD101020 || 4 || W || NAND DMA address
 
Bits 10-26: page to access during DMA.
 
Possibly just LBA >> 1?
|-
| 0xBD101024 || 4 || RW || NAND DMA control
 
Bit 0 = DMA transfer progress (0 = stopped, 1 = running)
 
Bit 1 = transfer direction (0 = NAND -> MEM, 1 = MEM -> NAND)
 
Bit 8 = page data transfer enabled
 
Bit 9 = spare data transfer enabled
|-
| 0xBD101028 || 4 || R || NAND DMA status
|-
| 0xBD101038 || 4 || RW || NAND DMA intr?
|-
| 0xBD101200 || 4 || RW || NAND resume? (0x0B040205 to resume)
|-
| 0xBD101300 || 4 || RW || NAND serial data
|-
|}
 
= 0xBD200000: MemoryStick =
 
{| class="wikitable"
|-
! Address !! Size !! R/W !! Description
|-
| 0xBD200000 || 2 || RW || MemoryStick interrupt
 
Bit 0 = reg address
 
Bit 4 = cmdnk (command cannot be executed)
 
Bit 5 = breq (buffer request)
 
Bit 6 = error
 
Bit 7 = ced (command end)
 
|-
| 0xBD200002 || 2 || W? || Unknown
|-
| 0xBD200004 || 2 || RW || Command state
 
Bit 0: busy
 
|-
| 0xBD200010 || 2 || W? || Number of pages
|-
| 0xBD200012 || 2 || W? || OOB length
|-
| 0xBD200014 || 2 || W? || Start block
|-
| 0xBD200016 || 2 || W? || Set command to read and set page LBA
|-
| 0xBD200020 || 2 || W? || Unknown
|-
| 0xBD200024 || 2 || R || Read OOB data
|-
| 0xBD200024 || 1 || W || Write command data
|-
| 0xBD200028 || 2 or 4 || RW || Read/write page data
|-
| 0xBD200030 || 4 || RW || Start TPC
 
Bits 0-9 = size
 
Bits 12-31 = TPC code
 
Code 1 = read MG status
 
Code 2 = read page data
 
Code 3 = read short data
 
Code 4 = read reg
 
Code 5 = read IO data
 
Code 7 = get int
 
Code 8 = set rw reg address
 
Code 9 = ex set cmd
 
Code 10 = write IO data
 
Code 11 = write reg
 
Code 12 = write short data
 
Code 13 = write page data
 
Code 14 = set cmd
 
|-
| 0xBD200034 || 2 or 4 || RW || Read/write TPC data
|-
| 0xBD200038 || 2 or 4 || RW || Memstick status
 
Bits 0-3 = bits 4-7 from the reg address register
 
Bit 8 = timeout
 
Bit 9 = CRC error
 
Bit 12 = ready
 
Bit 13 = unknown
 
Bit 14 = FIFO RW
|-
| 0xBD20003C || 4 || RW || Memstick sys
 
Bit 9 = command
 
Bit 11 = interrupt
 
Bit 15 = reset
|-
| 0xBD200040 || 4 || RW || Unknown
|-
|}
 
= 0xBD300000: WLAN =
 
The interface to the WLAN is the same as to the Memorystick, just with different commands.
 
= 0xBD400000: Graphics Engine =
 
{| class="wikitable"
|-
|-
! Physical Address !! Size !! R/W !! Description
! Physical Address !! Size !! R/W !! Description
|-
|-
| 0xBD400000 || 4 || RW || RW bit 1: set to 1 to reset, wait until bit is 0 to know the GE has been reset
|- 0xBC600000 || 32 || RW || System time in microseconds. Wraps around every 1.1 hours?  
|-
|- 0xBC600004 || 32 || RW || Alarm time, raises interrupt (19?) when system time hits this number
| 0xBD400004 || 4 || RW? || Unknown (accessible through sceGeSet/GetReg() and passed to the interrupt handlers but unused)
|- 0xBC600008 || 32 || RW ||   Unknown, typically 0x30 but can be written
|-
|- 0xBC60000C || 32 || RW ||   Unknown, typically 1 but can be written. (Writing 0 caused a hang, maybe disables timer incrementing?)
| 0xBD400008 || 4 || R || RO bits 0x0000FFFF: shifted left by 10, gives the EDRAM hardware size (sceGeEdramGetHwSize()) (only used for tachyon < 0x00500000)
|- 0xBC600010 || 32 || RW ||   Unknown, typically 0
|-
| 0xBD400100 || 4 || RW || RW bit 0x001: 0 = stopped, 1 = running
 
R  bit 0x002: 0 = branching condition true, 1 = false
 
R  bit 0x100: 1 = is at depth 1 (or 2) of calls
 
R  bit 0x200: 1 = is at depth 2 of calls
|-
| 0xBD400104 || 4 || RW? || Status? (accessible through sceGeSet/GetReg() but unused)
|-
| 0xBD400108 || 4 || RW || Address of the display list currently being run
|-
| 0xBD40010C || 4 || RW || Stall address of the display list (0 = no stall address)
|-
| 0xBD400110 || 4 || RW || First return address (after the first CALL command)
|-
| 0xBD400114 || 4 || RW || Second return address (after the second CALL command)
|-
| 0xBD400118 || 4 || RW || Address of vertices (for bezier etc)
|-
| 0xBD40011C || 4 || RW || Address of indices (for bezier etc)
|-
| 0xBD400120 || 4 || RW || Address of the origin (set by ORIGIN, destination address for JUMP/BJUMP/CALL after adding BASE and the address specified in the command)
|-
| 0xBD400124 || 4 || RW || Same as above, for the first call
|-
| 0xBD400128 || 4 || RW || Same as above, for the second call
|-
| 0xBD400200 || 4 || RW || Bit 1 set by sceGeSetGeometryClock(), exact usage unknown
|-
| 0xBD400300 || 4 || RW || Unknown (accessible through sceGeSet/GetReg() but unused)
|-
| 0xBD400304 || 4 || RW || Get/set current command status (1 = SIGNAL, 2 = END, 4 = FINISH, 8 = ERROR)
|-
| 0xBD400308 || 4 || RW || Get/clear interrupts
|-
| 0xBD40030C || 4 || W || Change interrupts (ie swap the status of specified interrupts)
|-
| 0xBD400310 || 4 || W || Change command status (ie swap the status of specified bits)
|-
| 0xBD400400 || 4 || RW || Set to 4 when the used edram size is 0x00200000 and 2 when it's 0x00400000 (!)
|-
| 0xBD400800 || 1024 || R || Each type a command is executed by the GE, its value, including arguments, is saved here (4 bytes per command)
|-
| 0xBD400C00 || 384 || R || BONE matrices
|-
| 0xBD400D80 || 48 || R || WORLD matrices
|-
| 0xBD400DB0 || 48 || R || VIEW matrices
|-
| 0xBD400DE0 || 48 || R || PROJ matrices
|-
| 0xBD400E20 || 48 || R || TGEN matrices
|-
| 0xBD400E50 || 48 || R || COUNT matrices (probably)
|-
|}
 
= 0xBD500000: Graphics Engine EDRAM =
 
{| class="wikitable"
|-
! Address
! Size
! Read/write
! Description
|-
| 0xBD500000 || 4 || RW || Unknown, bits 0x00F00000 set by sceGeEdramSetRefreshParam's 4th argument
|-
| 0xBD500010 || 4 || RW || Set to 2 before reset and 0 after reset is done, bit 1 seems to be initialization (used by sceGeEdramInit())
|-
| 0xBD500020 || 4 || RW || Set to 0x6C4 by default and bits 0x007FFFFF set by sceGeEdramSetRefreshParam's second argument
|-
| 0xBD500030 || 4 || RW || Bits 0x000003FF set by sceGeEdramSetRefreshParam's third argument
|-
| 0xBD500040 || 4 || RW || Set to 1 in sceGeEdramInit(), and to 3 if sceGeEdramSetRefreshParam's first argument (mode) is 1 and the bit 2 isn't set
|-
| 0xBD500050 || 4 || RW || Unknown, accessible through sceGeSetReg/GetReg()
|-
| 0xBD500060 || 4 || RW || Unknown, accessible through sceGeSetReg/GetReg()
|-
| 0xBD500070 || 4 || RW || Bit 1: disable address translation
|-
| 0xBD500080 || 4 || RW || The address translation value
|-
| 0xBD500090 || 4 || RW || Unknown, set to 3 in sceGeEdramInit(), accessible through sceGeSetReg/GetReg()
|-
| 0xBD5000A0 || 4 || RW || Unknown, accessible through sceGeSetReg/GetReg()
|-
|-
|}
|}
= 0xBD600000: ATA/UMD =
{| class="wikitable"
|-
! Address
! Size
! Read/write
! Description
|-
| 0xBD600000 || 4 || R? || Unknown (returns 0x00010033)
|-
| 0xBD600004 || 4 || W? || Unknown (0x04028002 is written here)
|-
| 0xBD600010 || 4 || RW || Unknown (reset?)
|-
| 0xBD600014 || 4 || W? || Unknown
|-
| 0xBD60001C || 4 || W? || Unknown (0x00020A0C is written here)
|-
| 0xBD600034 || 4 || RW || Unknown (0 is written here)
|-
| 0xBD600038 || 4 || W? || Unknown (0x00010100 is written here)
|-
| 0xBD600040 || 4 || RW || Unknown (0 is written here, flag 0x2 is tested)
|-
| 0xBD600044 || 4 || W? || Unknown
|-
|}
= 0xBD700000: ATA/UMD =
{| class="wikitable"
|-
! Address
! Size
! Read/write
! Description
|-
| 0xBD700000 || 2 || RW || Read/write data
|-
| 0xBD700001 || 1 || RW || Features (?)
|-
| 0xBD700002 || 1 || RW || Sector count
|-
| 0xBD700003 || 1 || RW || Sector number
|-
| 0xBD700004 || 1 || RW || Cylinder low
|-
| 0xBD700005 || 1 || RW || Cylinder high
|-
| 0xBD700006 || 1 || RW || Drive
|-
| 0xBD700007 || 1 || RW || Command
Cmd 0x00 = nop
Cmd 0x08 = device reset
Cmd 0x70 = seek
Cmd 0x90 = exec device diagnostic
Cmd 0xA0 = packet
Cmd 0xA1 = identify packet device
Cmd 0xC6 = set multiplue
Cmd 0xC8 = read
Cmd 0xCA = write
Cmd 0xDE = media lock
Cmd 0xDF = media unlock
Cmd 0xE0 = standby
Cmd 0xE2 = standby immediate
Cmd 0xE3 = idle
Cmd 0xE5 = check power mode
Cmd 0xE6 = sleep
Cmd 0xE7 = flush
Cmd 0xEC = ID ATA
Cmd 0xED = media eject
Cmd 0xEF = set features
Cmd 0xF0 = psp reset
|-
| 0xBD700008 || 1 || W? || End of data
|-
| 0xBD70000E || 1 || RW || Control
Bit 2 = soft reset
|-
|}
= 0xBD800000: USB =
{| class="wikitable"
|-
! Address
! Size
! Read/write
! Description
|-
| 0xBD800000 || 4 || RW || Get/set control of first sending endpoint
Bit 1 = unknown
Bit 3 = unknown
Bits 4-5 = transfer type
Bit 6 = unknown
Bit 7 = unknown
Bit 8 = unknown
|-
| 0xBD800004 || 4 || RW || Read/clear status of first sending endpoint
Bits 4, 5, 6, 7, 9, 10, 14 = unknown
|-
| 0xBD800008 || 4 || RW || Max packet size in words for first sending endpoint
|-
| 0xBD80000C || 4 || RW || Max packet size in bytes for first sending endpoint (possible value: 0x40)
|-
| 0xBD800010 || 4 || RW || Unknown address, for first sending endpoint (0x80000000 is written there)
|-
| 0xBD800014 || 4 || RW || Unknown address, for first sending endpoint (0x80000000 is written there)
|-
| 0xBD800020 || 24 || RW || Same as above, for 2nd sending endpoint
|-
| 0xBD800040 || 24 || RW || Same as above, for 3rd sending endpoint
|-
| 0xBD800060 || 24 || RW || Same as above, for 4th sending endpoint
|-
| 0xBD800080 || 24 || RW || Same as above, for 5th sending endpoint
|-
| 0xBD800200 || 24 || RW || Same as above, for 1st receiving endpoint
|-
| 0xBD800220 || 24 || RW || Same as above, for 2nd receiving endpoint
|-
| 0xBD800240 || 24 || RW || Same as above, for 3rd receiving endpoint
|-
| 0xBD800260 || 24 || RW || Same as above, for 4th receiving endpoint
|-
| 0xBD800280 || 24 || RW || Same as above, for 5th receiving endpoint
|-
| 0xBD800400 || 4 || RW || Unknown (possible values: 0xA0, 0x8 = activated without charging, 0x1)
|-
| 0xBD800404 || 4 || RW || Unknown
|-
| 0xBD800408 || 4 || R? || Unknown
|-
| 0xBD80040C || 4 || RW || Clear/read connection interrupt
Value 0 = connect
Value 1 = streaming
Value 2 = detach 1
Value 4 = detach 2
Value 6 = unknown
|-
| 0xBD800410 || 4 || RW || Set/get enabled connection interrupts (same bits as above)
|-
| 0xBD800414 || 4 || RW || Unknown
|-
| 0xBD800418 || 4 || RW || Disabled endpoints interfaces (bits 0-8 = sending, and bits 16-24 = receiving?)
|-
| 0xBD80041C || 4 || RW || Unknown (possible value: 0)
|-
| 0xBD800504 || 4 || W? || Unknown
|-
| 0xBD800508 || 4 || W? || Unknown
|-
| 0xBD80050C || 4 || W? || Unknown
|-
| 0xBD800510 || 4 || W? || Unknown
|-
| 0xBD800514 || 4 || W? || Unknown
|-
|}
= 0xBD900000: EFlash (PSP Go only) =
{| class="wikitable"
|-
! Address
! Size
! Read/write
! Description
|-
| 0xBD900004 || 4 || W? || Unknown, set to 0x04024002
|-
| 0xBD900010 || 4 || W? || Write 1 to reset
|-
| 0xBD900014 || 4 || W? || Unknown
|-
| 0xBD900018 || 4 || W? || Unknown
|-
| 0xBD900024 || 4 || W? || Unknown
|-
| 0xBD900028 || 4 || W? || Unknown
|-
| 0xBD90002C || 4 || W? || Unknown, set to 0
|-
| 0xBD900030 || 4 || W? || Unknown, set to 0
|-
| 0xBD900034 || 4 || RW || Unknown
|-
| 0xBD900038 || 4 || W? || Unknown
|-
| 0xBD900040 || 4 || W? || Unknown
|-
| 0xBD900044 || 4 || RW || Clear/read interrupt flag
|-
|}
= 0xBDA00000: EFlash ATA (PSP Go only) =
Same interface as 0xBD700000.
= 0xBDB00000: EFlash DMA =
{| class="wikitable"
|-
! Address
! Size
! Read/write
! Description
|-
| 0xBDB00008 || 4 || W? || Set to 1 to reset
|-
| 0xBDB00010 || 4 || W? || Control
Bit 0 = enable
Bit 1 = 1 if read from ATA, 0 if write to ATA
|-
| 0xBDB00020 || 4 || R? || Read interrupt flag
|-
| 0xBDB00024 || 4 || W? || Clear interrupt flag
|-
| 0xBDB00028 || 4 || RW || Unknown
|-
| 0xBDB0002C || 4 || W? || Unknown, clear bits from the previous register
|-
| 0xBDB00030 || 4 || W? || DMA address
|-
| 0xBDB00034 || 4 || W? || DMA size
|-
| 0xBDB00040 || 4 || W? || Unknown
|-
| 0xBDB00044 || 4 || W? || Unknown, set to 0
|}
= 0xBDE00000: KIRK =
{| class="wikitable"
|-
! Address
! Size
! Read/write
! Description
|-
| 0xBDE00000 || 4 || R || KIRK signature 'KIRK' (or 1?)
|-
| 0xBDE00004 || 4 || R || KIRK version '0010' (or 1?)
|-
| 0xBDE00008 || 4 || RW || Set to 1 on error by the command subroutine
|-
| 0xBDE0000C || 4 || RW || Set to 1 to start processing, or 2 to start processing phase2
|-
| 0xBDE00010 || 4 || RW || KIRK command
0x01 = Private decrypt
0x02 = Encrypt (type2)
0x03 = Decrypt (type2)
0x04 = Encrypt (type3) (IV = 0)
0x05 = Encrypt (type3) (IV = Fuse)
0x06 = Encrypt (type3) (IV = User)
0x07 = Decrypt (type3) (IV = 0)
0x08 = Decrypt (type3) (IV = Fuse)
0x09 = Decrypt (type3) (IV = User)
0x0A = Private Signature Check
0x0B = SHA-1 Hash
0x0C = ECDSA Key Generate
0x0D = ECDSA Point Multiply
0x0E = Pseudo-random Number Generator
0x0F = PRNG Seed? Init?
0x10 = ECDSA Sign
0x11 = ECDSA Signature Check
|-
| 0xBDE00014 || 4 || RW || Result of the command
|-
| 0xBDE00018 || 4 || RW || Unknown
|-
| 0xBDE0001C || 4 || RW || KIRK status
Bit 0 = phase finish
Bit 1 = phase error?
Bit 4 = phase 2 needed
Bit 5 = ? (phase 1 error maybe?)
This should be used for checking processing status, and will notify when the processing has finished.
All bits are 0 while execution is still in progress.
If the command has two phases, Phase 2 Needed will be set when Phase Finish gets set.
Bit1 and bit5 are not well known, but it seems that bit1 is Error for Phase 1, and Success for Phase 2? Bit5 is only checked for Phase 1, and leads to the same error codepath as bit1.
|-
| 0xBDE00020 || 4 || RW || Status async?
|-
| 0xBDE00024 || 4 || RW || Status async end?
|-
| 0xBDE00028 || 4 || RW || Set to the value of 0xBDE0001C at the end of the command subroutine
|-
| 0xBDE0002C || 4 || RW || KIRK source buffer (physical address)
|-
| 0xBDE00030 || 4 || RW || KIRK destination buffer (physical address)
|-
| 0xBDE0004C || 4 || RW || Unknown
|-
| 0xBDE00050 || 4 || RW || Unknown
|-
|}
= 0xBDF00000: SPOCK =
{| class="wikitable"
|-
! Address !! Size !! R/W !! Description
|-
| 0xBDF00000 || 4 || R || Spock signature 'SPOK'
|-
| 0xBDF00004 || 4 || R || Spock version '0050'
|-
| 0xBC900008 || 4 || RW || Reset
Bit 0 = reset
|-
| 0xBDF00010 || 4 || RW || Set command
Value 0x01 = ?
Value 0x02 = Authentication
Value 0x03 = ?
Value 0x04 = write QTGP2 () at the first transfer address
Value 0x05 = write QTGP3 () at the first transfer address
Value 0x08 = Decrypt MKI
Value 0x09 = Decrypt key from IDStorage
Value 0x0A = Decrypt read data sector (not used/skipped, it decrypts sectors on the fly)
Value 0x0B = ?
Value 0x0C = ?
|-
| 0xBD900014 || 4 || R? || Unknown
|-
| 0xBDF00018 || 4 || RW || Drive mode flags, value == 0x111 for DVD mode, otherwice UMD mode.
|-
| 0xBD90001C || 4 || R? || Unknown
|-
| 0xBD900020 || 4 || R? || Get interrupt flags?
|-
| 0xBD900024 || 4 || RW || Clear interrupt?
|-
| 0xBDF00028 || 4 || RW || Enable interrupt
|-
| 0xBD90002C || 4 || RW || Disable interrupt?
|-
| 0xBDF00030 || 4 || R || Error Status
|-
| 0xBD900038 || 4 || RW || Unknown, set to 4
|-
| 0xBD900040 || 4 || W? || Transfer address 0
|-
| 0xBD900044 || 4 || W? || Transfer size 0
|-
| 0xBD900048 || 4 || W? || Transfer address 1
|-
| 0xBD90004C || 4 || W? || Transfer size 1
|-
| 0xBD900050 || 4 || W? || Transfer address 2
|-
| 0xBD900054 || 4 || W? || Transfer size 2
|-
| 0xBD900058 || 4 || W? || Transfer address 3
|-
| 0xBD90005C || 4 || W? || Transfer size 3
|-
| 0xBD900060 || 4 || W? || Transfer address 4
|-
| 0xBD900064 || 4 || W? || Transfer size 4
|-
| 0xBD900068 || 4 || W? || Transfer address 5
|-
| 0xBD90006C || 4 || W? || Transfer size 5
|-
| 0xBD900070 || 4 || W? || Transfer address 6
|-
| 0xBD900074 || 4 || W? || Transfer size 6
|-
| 0xBD900078 || 4 || W? || Transfer address 7
|-
| 0xBD90007C || 4 || W? || Transfer size 7
|-
| 0xBD900080 || 4 || W? || Transfer address 8
|-
| 0xBD900084 || 4 || W? || Transfer size 8
|-
| 0xBD900088 || 4 || W? || Transfer address 9
|-
| 0xBD90008C || 4 || W? || Transfer size 9
|-
| 0xBD900090 || 4 || RW || Total transfer length
|-
| 0xBD900094 || 4 || W? || Unknown, can be 0 or 1
|-
|}
= 0xBE000000: Audio =
{| class="wikitable"
|-
! Address
! Size
! Read/write
! Description
|-
| 0xBE000000 || 4 || RW || Audio init/reset?
|-
| 0xBE000004 || 4 || W? || Disable audio input/output?
Bit 0: enable output
Bit 1: enable SRC output (?)
Bit 2: enable audio input
Bit 3: ??
|-
| 0xBE000008 || 4 || W? || Same as 0xBE000004 but with reversed bits; enable audio input/output?
|-
| 0xBE00000C || 4 || RW || Seems to contain the current value for 0xBE000004 (ie the current enabled input/outputs)
|-
| 0xBE000010 || 4 || W? || Similar to 0xBE000004 but set only when starting playing something, and input bit is set only for loopback test?
|-
| 0xBE000014 || 4 || W? || Unknown, set to 0x1208 = 4616 during initialization
|-
| 0xBE000018 || 4 || W? || Unknown, set to 0 during initialization
|-
| 0xBE00001C || 4 || R? || Similar to 0xBE000004; possibly bits which finished execution?
|-
| 0xBE000020 || 4 || W? || Another similar set of flags
|-
| 0xBE000024 || 4 || W? || Another similar set of flags (enabled interrupts?)
|-
| 0xBE000028 || 4 || RW || Another similar set of flags
|-
| 0xBE00002C || 4 || W? || Another similar set of flags
|-
| 0xBE000038 || 4 || W? || Set to 256 when frequency in 48kHz, 128 when it is 44.1kHz or during SRC output
|-
| 0xBE00003C || 4 || W? || Same as above, but not set at initialization time
|-
| 0xBE000040 || 4 || RW || Frequency-related??
|-
| 0xBE000044 || 4 || W? || Hardware frequency?
|-
| 0xBE000050 || 4 || RW || Volume?
|-
| 0xBE000060 || 4 || W? || Send audio data?
|-
| 0xBE000070 || 4 || W? || Send audio data?
|-
| 0xBE000080 || 4 || ? || ??
|-
| 0xBE0000D0 || 4 || ? || ??
|}
= 0xBE100000: MagicGate Type-R =
{| class="wikitable"
|-
! Address
! Size
! Read/write
! Description
|-
| 0xBE100000 || ? || ? || Unknown
|-
| 0xBE100010 || ? || ? || ?Key size (in bits)?. ex: 0x100 (hardcoded)
|-
| 0xBE100020 || ? || ? || Unknown
|-
| 0xBE100038 || ? || ? || Hardware version 1
|-
| 0xBE100040 || 0x10 || ? || Key
|-
| 0xBE100050 || 8 || ? || Unknown
|-
| 0xBE100060 || 0x10 || ? || IV
|-
| 0xBE100080 || ? || ? || Control
|-
| 0xBE100084 || ? || ? || Status
|-
| 0xBE100088 || ? || ? || Algorithm
|-
| 0xBE100090 || ? || ? || Unknown. Value at bit 8 is used.
|-
| 0xBE100094 || ? || ? || Size
|-
| 0xBE100098 || ? || ? || Hardware version 2
|-
| 0xBE1000A0 || ?0x800? || ? || Input buffer
|}
= 0xBE140000: LCDC =
{| class="wikitable"
|-
! Address
! Size
! Read/write
! Description
|-
| 0xBE140000 || 4 || RW || First LCDC controller enable
Bits 0-1 = 3 to enable first LCDC controller (tachyon version < 0x800000; otherwise it's set to 0)
|-
| 0xBE140004 || 4 || RW || Synchronization difference: (xsync / zoom) - ysync
|-
| 0xBE140008 || 4 || RW || Unknown (fourth argument of sceLcdcCheckMode and sceLcdcSetMode)
|-
| 0xBE140010 || 4 || RW || X back porch
|-
| 0xBE140014 || 4 || RW || X sync width
|-
| 0xBE140018 || 4 || RW || X front porch
|-
| 0xBE14001C || 4 || RW || X resolution
|-
| 0xBE140020 || 4 || RW || Y back porch
|-
| 0xBE140024 || 4 || RW || Y sync width
|-
| 0xBE140028 || 4 || RW || Y front porch
|-
| 0xBE14002C || 4 || RW || Y resolution
|-
| 0xBE140030 || 4 || R || HPC (?), returned by sceLcdcReadHPC()
|-
| 0xBE140034 || 4 || R || VPC (?), returned by sceLcdcReadVPC()
|-
| 0xBE140040 || 4 || RW || Y shift (between hardware & software resolution)
|-
| 0xBE140044 || 4 || RW || X shift (between hardware & software resolution)
|-
| 0xBE140048 || 4 || RW || Scaled X resolution
|-
| 0xBE14004C || 4 || RW || Scaled Y resolution (same as the physical Y resolution)
|-
| 0xBE140050 || 4 || RW || Unknown, set to 1, maybe used by sceLcdcReadUnderflow (to be verified)
|-
| 0xBE140070 || 4 || W || Set to 1 when running sceLcdcResume() or sceLcdcInit() on tachyon version >= 0x5000000
|-
|}
The exact same registers are at 0xBE1401.., these ones being used for tachyon version >= 0x8000000 (PSP Go?). <br>
These registers are only set on tachyo version >= 0x8000000:
{| class="wikitable"
|-
! Address
! Size
! Read/write
! Description
|-
| 0xBE140180 || 4 || RW || Always set to 1 when 0xBE140184 - 0xBE140198 are used
|-
| 0xBE140184 || 4 || RW || Scaled X resolution (read instead of the (real) X resolution above when enabled)
|-
| 0xBE140188 || 4 || RW || Y resolution (read instead of the (real) Y resolution above when enabled)
|-
| 0xBE14018C || 4 || RW || Unknown (0x580 - 0x678)
|-
| 0xBE140190 || 4 || RW || Unknown (0x4C4 - 0x71C)
|-
| 0xBE140194 || 4 || RW || Unknown (0xAFC - 0xCEC)
|-
| 0xBE140198 || 4 || RW || Unknown (0x910 - 0xE38)
|-
| 0xBE1401A0 || 4 || RW || Display flags?
|-
| 0xBE1401B0 || 4 || RW || Display clock?
|-
| 0xBE140200 || 4 || W || Set to 1 on initialization
|-
|}
= 0xBE200000: I2c =
{| class="wikitable"
|-
! Address
! Size
! Read/write
! Description
|-
| 0xBE200000 || 4 || R? || Unknown
|-
| 0xBE200004 || 4 || RW || Command
Value 0x85 = unknown (used after writing the transmit data)
Value 0x8A = receive data
Value 0x87 = unknown (used after writing the transmit data)
|-
| 0xBE200008 || 4 || RW || Data length
|-
| 0xBE20000C || 4 || R? || Read/write data
|-
| 0xBE200010 || 4 || RW || Unknown
|-
| 0xBE200014 || 4 || RW || Unknown
|-
| 0xBE20001C || 4 || RW || Unknown
|-
| 0xBE200028 || 4 || R? || Clear/read interrupt
|-
| 0xBE20002C || 4 || W? || Unknown
|-
|}
= 0xBE240000: GPIO =
{| class="wikitable"
|-
! Address
! Size
! Read/write
! Description
|-
| 0xBE240000 || 4 || RW || Is output (?)
|-
| 0xBE240004 || 4 || R || GPIO read pin (1 bit = 1 pin)
|-
| 0xBE240008 || 4 || W || GPIO set pin (1 bit = 1 pin)
|-
| 0xBE24000C || 4 || W|| GPIO clear pin (1 bit = 1 pin)
|-
| 0xBE240010 || 4 || RW || Is edge detection (?)
|-
| 0xBE240014 || 4 || RW || Is falling edge (?)
|-
| 0xBE240018 || 4 || RW || Is rising edge (?)
|-
| 0xBE24001C || 4 || RW || Interrupt enable
|-
| 0xBE240020 || 4 || R? || Interrupt Status
|-
| 0xBE240024 || 4 || W || Acknowledge interrupt
|-
| 0xBE240030 || 4 || RW || Capture port enable
|-
| 0xBD240034 || 4 || RW || Timer capture enable
|-
| 0xBE240040 || 4 || RW || Is input on (?)
|-
| 0xBE240048 || 4 || W? || Unknown
|-
|}
= 0xBE300000: Power management? =
Seems to be composed of 3 controllers, each of size 0x20.
= 0xBE4C0000 & 0xBE500000: UART =
[https://developer.arm.com/documentation/ddi0183/f/programmer-s-model/summary-of-registers?lang=en ARM PrimeCell UART PL011]
There are two similar UART controllers:
* At 0xBE4C0000: UART4 = ?
* At 0xBE500000: UART3 = Headphone/remote SIO
There is also possibly an infrared controller at 0xBE540000.
UART port numbers vary depending on documentations.
Some documentations seem to argue that there are 8 controllers for 0xBE40 to 0xBE5C, but the syscon interface looks very different so it might not be the case.
{| class="wikitable"
|-
! Address
! Size
! Read/write
! Description
|-
| 0xBExx0000 || 4 || RW || Read/write FIFO of the UART port
Bits 0-7 = data
Writing writes a byte to the Tx buffer and advances the write position.
Reading reads a byte from the Rx buffer and advances the read position.
The FIFO is 32(?) bytes long.
|-
| 0xBExx0004 || 4 || RW || Unknown
|-
| 0xBExx0018 || 4 || RW || Port status
Bit 4 = Rx buffer status is empty
Bit 5 = Tx buffer status is full
|-
| 0xBExx0024 || 4 || W || Upper bits of baudrate divisor, ie (96000000 / baudrate) >> 6
|-
| 0xBExx0028 || 4 || W || Lower bits of baudrate divisor, ie (96000000 / baudrate) & 0x3f
|-
| 0xBExx002C || 4 || RW || Set bits 5-6 to set the baud rate?
|-
| 0xBExx0030 || 4 || RW || Unknown
|-
| 0xBExx0034 || 4 || RW || Unknown
|-
| 0xBExx0038 || 4 || RW || Unknown
|-
| 0xBExx0044 || 4 || RW || Clear interrupt?
|-
|}
= 0xBE580000: Syscon =
[https://developer.arm.com/documentation/ddi0194/h/programmer-s-model/summary-of-primecell-ssp-registers?lang=en ARM PrimeCell Synchronous Serial port PL022]
TODO: validate register mappings
{| class="wikitable"
|-
! Address
! Size
! Read/write
! Description
|-
| 0xBE580000 || 4 || W? || Unknown (0xCF is written there at initialization time)
|-
| 0xBE580004 || 4 || RW || Flags
Bit 1 = start syscon command
Bit 2 = reset data index
Bit 3 = in progress?
|-
| 0xBE580008 || 4 || RW || Read/write data
Bits 0-15: 16-bit data
|-
| 0xBE58000C || 4 || R? || Flags
Bit 0 = error
Bit 2 = not finished
|-
| 0xBE580014 || 4 || W? || Unknown (0 is written there)
|-
| 0xBE580018 || 4 || R? || Unknown
|-
| 0xBE580020 || 4 || W? || Unknown; clear error status?
|-
| 0xBE580024 || 4 || W? || Unknown (0 is written there)
|-
|}
= 0xBE5C0000: LCD controller (Slim) =
{| class="wikitable"
|-
! Address
! Size
! Read/write
! Description
|-
| 0xBE5C0000 || 4 || W? || Unknown
|-
| 0xBE5C0004 || 4 || W? || Unknown
|-
| 0xBE5C0008 || 4 || RW? || Unknown
|-
| 0xBE5C000C || 4 || R? || Unknown
|-
| 0xBE5C0010 || 4 || W? || Unknown
|-
| 0xBE5C0014 || 4 || W? || Unknown
|-
| 0xBE5C0024 || 4 || W? || Unknown
|-
|}
= 0xBE740000: Display =
{| class="wikitable"
|-
! Address
! Size
! Read/write
! Description
|-
| 0xBE740000 || 4 || W? || Unknown
|-
| 0xBE740004 || 4 || RW || Get/set row sync (?)
|-
| 0xBE740008 || 4 || R? || Get sync (?)
|-
| 0xBE74000C || 4 || W? || Unknown
|-
| 0xBE740010 || 4 || W? || Unknown
|-
| 0xBE740014 || 4 || W? || Unknown
|-
| 0xBE740020 || 4 || R? || Unknown
|-
| 0xBE740024 || 4 || W? || Unknown
|-
|}
= 0xBE780000: Display (Slim) =
{| class="wikitable"
|-
! Address
! Size
! Read/write
! Description
|-
| 0xBE780000 || 4 || ? || Unknown
|-
| 0xBE78001C || 4 || ? || Unknown
|}
= 0xBFC00000 & 0xBFD00000 & 0xBFE00000: MIPS Reset Vector and RAM =
Note this is not a hardware register *per se*.
At boot time, the PSP [[iplloader]] is mapped to read-only 0xBFC00000 then executed. An additional 4096-byte scratchpad-like RAM is accessible at 0xBFD00000 and used as a temporary space to decrypt the IPL blocks.
Then, once the CPU is reset (0xBC10004C |= 2), the iplloader is unmapped, and the memory which was then at 0xBFD00000 is now mapped at 0xBFC00000 and execution restarts at 0xBFC00000.
On devkit, bloadp is copied to 0xBFE00000 then executed. IPL blocks are usually copied to 0xBFE01000, decrypted in place then executed.
= 0xBFF00000: NAND DMA buffer =
{| class="wikitable"
|-
! Address
! Size
! Read/write
! Description
|-
| 0xBFF00000 || 512 || RW || NAND DMA data buffer. These 512 bytes contain the page data to be transferred to/from the NAND during DMA. This does not include spare nor ECC information
|-
| 0xBFF00800 || 4 || RW || Calculated ECC for DMA data
|-
| 0xBFF00900 || 16 || RW || Spare data to be transferred from/to the NAND during DMA. This does not include spare nor ECC information
|-
|}
= References =
* [http://daifukkat.su/docs/psptek/ PSPTEK]
* [https://gigawiz.github.io/yapspd/html_chapters_split/chap8.html yapspd]
* [https://github.com/uofw/uofw uOFW]
* [https://github.com/jpcsp/jpcsp Jpcsp]
Please note that all contributions to PSP Developer wiki are considered to be released under the GNU Free Documentation License 1.2 (see PSP Developer wiki:Copyrights for details). If you do not want your writing to be edited mercilessly and redistributed at will, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource. Do not submit copyrighted work without permission!

To protect the wiki against automated edit spam, we kindly ask you to solve the following hCaptcha:

Cancel Editing help (opens in new window)
Retrieved from "http://www.psdevwiki.com/psp/Hardware_Registers"