Storage
Jump to navigation
Jump to search
Overview
The PS5 has an 825GB PCIe 4.0 SSD soldered to the motherboard. It uses a proprietary custom controller.
There is a user-accessible slot for a m.2 2282 PCIe 4.0 SSD under the left side panel for future upgrades.
NVMe Expansion
Currently, any attempt to add a NVMe drive results in the following error:
A module is inserted in the expansion slot. Turn off your PS5, remove the module, and then turn the PS5 back on. Your PS5 will shut down in 30 seconds.
(Tested on a v1.00 CFI-1015A w/ a Samsung 970 EVO Plus)
NVMe Requirements
Interface | PCIe Gen 4.0 (x4) M.2 NVMe SSD |
Capacity | 250GB, 500GB, 1TB, 2TB or 4TB |
Heatsink | Required - either built-in or added yourself |
Sequential reads | 5500MB/s recommended |
Form factor | 2230, 2242, 2260, 2280 or 22110 |
Total size w/ heatsink | 110 x 25 x 11.25 millimetres
4.33 x 0.984 x 0.442 inches |
Heatsink max height (below SSD) | 2.45 millimetres
0.096 inches |
Heatsink max height (above SSD) | 8 millimetres
0.314 inches |