Service Connectors

There are two Service Connectors on the PS5:

Pictures

First Connector (5 Pins)

Second Connector (24 Pins)

Third Connector (24 Pins) (Bluray)

Meaning of Pins

• Starts at Leftmost (Indicated by Arrow)

5 Pins

PIN	Meaning	Notes
GND	Ground	Ground Plane
TX EMC	Transmit EMC	Used to send commands to EMC. command always <com>:<chk>\r\n
RX EMC	Receive EMC	Used to recv responses from EMC. response always <res>:<chk>\r\n
titania uart1 rx	titania uart1 rx	titania uart1 rx (bootrom: 460800, eap fw, apu: 230400)
titania uart1 rx	titania uart1 rx	titania uart1 rx (bootrom: 460800, eap fw, apu: 230400)

24 Pins

• Major credits to shuffle2 for the complete pinout

PIN	Meaning	Notes
VDD	VDD	5v
VDD	VDD	5v
GND	GND	Ground Plane
GND	GND	Ground Plane
emc gpio a1	emc gpio a1	pulling low at emc boot causes emc rom to enter uart shell @ 460800
RX EMC	Receive EMC	Used to recv responses from EMC. response always <res>:<chk>\r\n (uart rx emc 115200)
TX EMC	Transmit EMC	Used to send commands to EMC. command always <com>:<chk>\r\n (uart tx emc 115200)
3v3	3v3	goes low when emc resets
0v	0v	0v
GND	GND	Ground Plane
titania uart0 tx	titania uart0 tx	titania uart0 tx (efc fw: 460800)
titania uart0 rx	titania uart0 rx	titania uart0 rx (efc fw: 460800)
titania uart1 rx	titania uart1 rx	titania uart1 rx (bootrom: 460800, eap fw, apu: 230400)
titania uart1 tx	titania uart1 tx	titania uart1 tx (bootrom: 460800, eap fw, apu: 230400)
GND	GND	Ground Plane
emc gpio c5	emc gpio c5	("GPI SW" (only used if devif_det# active))
0v	0v	0v
5v	5v	5v
emc gpio a49	emc gpio a49	emc gpio a49
emc gpio a27	emc gpio a27	emc gpio a27. main power switch
i2c data	i2c data	i2c data (i2c_bus_4)
i2c clock	i2c clock	(i2c_bus_4)
GND	GND	Ground Plane
emc reset#	emc reset#	emc reset#