Service Connectors: Difference between revisions
Jump to navigation
Jump to search
(→5 Pins) |
|||
Line 46: | Line 46: | ||
{| class="wikitable sortable" | {| class="wikitable sortable" | ||
! PIN | ! PIN # !! Meaning !! Notes | ||
|- | |- | ||
| | | 1 || VDD || 5v | ||
|- | |- | ||
| | | 2 || VDD || 5v | ||
|- | |- | ||
| | | 3 || GND || Ground Plane | ||
|- | |- | ||
| | | 4 || GND || Ground Plane | ||
|- | |- | ||
| | | 5 || emc gpio a1 || pulling low at emc boot causes emc rom to enter uart shell @ 460800 | ||
|- | |- | ||
| | | 6 || Receive EMC || Used to recv responses from EMC. response always <res>:<chk>\r\n (uart rx emc 115200) | ||
|- | |- | ||
| | | 7 || Transmit EMC || Used to send commands to EMC. command always <com>:<chk>\r\n (uart tx emc 115200) | ||
|- | |- | ||
| | | 8 || 3v3 || goes low when emc resets | ||
|- | |- | ||
| | | 9 || 0v || 0v | ||
|- | |- | ||
| | | 10 || GND || Ground Plane | ||
|- | |- | ||
| | | 11 || titania uart0 tx || titania uart0 tx (efc fw: 460800) | ||
|- | |- | ||
| | | 12 || titania uart0 rx || titania uart0 rx (efc fw: 460800) | ||
|- | |- | ||
| | | 13 || titania uart1 rx || titania uart1 rx (bootrom: 460800, eap fw, apu: 230400) | ||
|- | |- | ||
| | | 14 || titania uart1 tx || titania uart1 tx (bootrom: 460800, eap fw, apu: 230400) | ||
|- | |- | ||
| | | 15 || GND || Ground Plane | ||
|- | |- | ||
| | | 16 || emc gpio c5 || ("GPI SW" (only used if devif_det# active)) | ||
|- | |- | ||
| | | 17 || 0v || 0v | ||
|- | |- | ||
| | | 18 || 5v || 5v | ||
|- | |- | ||
| | | 19 || emc gpio a49 || emc gpio a49 | ||
|- | |- | ||
| | | 20 || emc gpio a27 || emc gpio a27. main power switch | ||
|- | |- | ||
| | | 21 || i2c data || i2c data (i2c_bus_4) | ||
|- | |- | ||
| | | 22 || i2c clock || (i2c_bus_4) | ||
|- | |- | ||
| | | 23 || GND || Ground Plane | ||
|- | |- | ||
| | | 24 || emc reset# || emc reset# | ||
|} | |} |
Revision as of 23:18, 23 October 2024
There are two Service Connectors on the PS5:
Pictures
First Connector (5 Pins)
Second Connector (24 Pins)
Third Connector (24 Pins) (Bluray)
Meaning of Pins
- Starts at Leftmost (Indicated by Arrow)
5 Pins
PIN | Meaning | Notes |
---|---|---|
GND | Ground | Ground Plane |
TX EMC | Transmit EMC | Used to send commands to EMC. command always <com>:<chk>\r\n |
RX EMC | Receive EMC | Used to recv responses from EMC. response always <res>:<chk>\r\n |
titania uart1 tx | titania uart1 tx | titania uart1 tx (bootrom: 460800, eap fw, apu: 230400) |
titania uart1 rx | titania uart1 rx | titania uart1 rx (bootrom: 460800, eap fw, apu: 230400) |
24 Pins
- Major credits to shuffle2 for the complete pinout
PIN # | Meaning | Notes |
---|---|---|
1 | VDD | 5v |
2 | VDD | 5v |
3 | GND | Ground Plane |
4 | GND | Ground Plane |
5 | emc gpio a1 | pulling low at emc boot causes emc rom to enter uart shell @ 460800 |
6 | Receive EMC | Used to recv responses from EMC. response always <res>:<chk>\r\n (uart rx emc 115200) |
7 | Transmit EMC | Used to send commands to EMC. command always <com>:<chk>\r\n (uart tx emc 115200) |
8 | 3v3 | goes low when emc resets |
9 | 0v | 0v |
10 | GND | Ground Plane |
11 | titania uart0 tx | titania uart0 tx (efc fw: 460800) |
12 | titania uart0 rx | titania uart0 rx (efc fw: 460800) |
13 | titania uart1 rx | titania uart1 rx (bootrom: 460800, eap fw, apu: 230400) |
14 | titania uart1 tx | titania uart1 tx (bootrom: 460800, eap fw, apu: 230400) |
15 | GND | Ground Plane |
16 | emc gpio c5 | ("GPI SW" (only used if devif_det# active)) |
17 | 0v | 0v |
18 | 5v | 5v |
19 | emc gpio a49 | emc gpio a49 |
20 | emc gpio a27 | emc gpio a27. main power switch |
21 | i2c data | i2c data (i2c_bus_4) |
22 | i2c clock | (i2c_bus_4) |
23 | GND | Ground Plane |
24 | emc reset# | emc reset# |