Devices

See also IOCTL.

Note for ioctls: * indicates name is assumed from RE and may not be accurate.

Device Listing

Unique devices are listed here. Benign devices like /dev/null are omitted for brevity's sake.

Path	Device Name	Notes
/dev/a53{io,mm,mmsys}	A53 Input/Output, Memory Management (sys)	See MP4 section
/dev/ajm{i}	Audio Job Manager	-
/dev/auditpipe	-	-
/dev/authmgr	Authentication Manager	-
/dev/az{1,ctl}	-	Audio-related
/dev/bar	Backup and Restore	Used by shellcore for backup and recovery
/dev/bfs/ctl	-	-
/dev/bluetooth_hid	-	-
/dev/bt	-	-
/dev/camera	Camera	-
/dev/cloudsd	Cloud SaveData	-
/dev/console	Console	Usermode logging
/dev/crepo	Crash Report	Used for crash reporting service (coredump, gpudump, shellcore)
/dev/ctrlp{_sync}	-	Used by libScePad (controller)
/dev/dbggc{_control}	Debug GPU?	-
/dev/deci_coredump	Debug Com. Interface (DECI) coredump	-
/dev/deci_mp4_ioc	DECI I/O Control?	-
/dev/deci_mp4_mmc	-	-
/dev/deci_std{in,out,err}	DECI Input/Output/Error	-
/dev/deci_tty*	DECI Terminals	-
/dev/devctl	-	-
/dev/diag	-	-
/dev/dipsw	Dip Switch	-
/dev/dldbg	Dynamic Library Debug	-
/dev/dmem{0,1,2}	-	-
/dev/dngl	-	-
/dev/duid	Disc Unique ID	-
/dev/encdec	EncDec	-
/dev/envelope	Envelope Format Crypto	-
/dev/evlg{0,1}	Event Log	Intended to be used with read syscall
/dev/exthdd	External HDD	-
/dev/fcram	-	-
/dev/fsctrl	-	-
/dev/fttrm	-	Used by bluray app
/dev/gbase	-	-
/dev/gc	GPU command	-
/dev/geom.ctl	-	-
/dev/gic	-	-
/dev/gsched_bds.ctl	-	-
/dev/hdmi	HDMI	-
/dev/hid	-	-
/dev/hmd2_*	VR 2?	-
/dev/hmd_*	VR	-
/dev/iccnvs{0,1,2,4,6}	ICC_NVS (sectors)	Location of Sectors 0, 1, 2, 4 and 6 of sflash0 non volatile storage
/dev/icc_configuration	ICC Config	-
/dev/icc_crash_report	ICC Crash Report	-
/dev/icc_device_power	ICC Device Power	-
/dev/icc_fan	ICC Fan	-
/dev/icc_floyd	ICC TPM?	SNVS Storage Device
/dev/icc_indicator	ICC LED	-
/dev/icc_nvs	ICC NVS	-
/dev/icc_power	ICC Power	-
/dev/icc_sc_config	ICC Syscon? Config	-
/dev/icc_thermal	ICC Thermal	-
/dev/klog	Kernel Log	Read syscall on this device can be used to get kernel log if privileged
/dev/kmbp	-	-
/dev/lvdctl	Layered Vnode Device Control	-
/dev/lvd{0,1}	Layered Vnode Device	-
/dev/m2.ctl	m.2 NVMe Control?	-
/dev/manuauth	Manufacturer Auth	-
/dev/mbus	Event bus	-
/dev/mbus_av	Event bus (audio video?)	-
/dev/md0	Kernel Md0	Main System modules are located here for Kernel (Not System Modules!)
/dev/md2	-	-
/dev/mdctl	-	-
/dev/metadbg	-	-
/dev/mp1	System Management Unit (SMU)	Power management, thermals, etc. (see mp1 section)
/dev/mp3	Trusted Execution Environment (TEE)	See mp3 section
/dev/mp4/dump{_for_decid}	A53 (mdbg?)	See mp4 section
/dev/notification{0-9}	Notification	-
/dev/npdrm	Network Product Digital Rights Management interface	-
/dev/nsfsctl	Namespace Filesystem (NSFS) Control	-
/dev/nsid1.ctl	-	-
/dev/otpaccess	One-Time Programmable Access?	-
/dev/pfsctldev	Playstation Filesystem (PFS) Control	-
/dev/pfsmgr	PFS Manager	Used for trophies, savegames, keystone
/dev/playgo_emu_param{1,2,3}	PlayGo emulator params	-
/dev/pltauth{0,1}	Platform Authentication (PSN)	-
/dev/pup_update0	PUP Update	-
/dev/qafutkn	QA flag / Utoken	-
/dev/rnps	React Native PS	PSN related
/dev/rootparam	Root Param	Used by shellcore for verifying root param sfo/json
/dev/s3da	3D Audio	-
/dev/sbl_secreg	SBL Secure Region	-
/dev/sbl_srv	SBL Service	Used exclusively by playready
/dev/scanin	-	-
/dev/sce_zlib{_sys}	zlib	zlib (de)compression
/dev/sc_fw_update0	(syscon?) firmware update	-
/dev/sflash0	SPI flash	2MB. Has EMC firmware and (non-secure) NVS.
/dev/srtc	Secure Real Time Clock	-
/dev/ssd0.*	Internal SSD partitions	-
/dev/sshot	Screenshot	-
/dev/transactionid.ctl	-	-
/dev/ufssuspend	-	-
/dev/usbctl	USB control	-
/dev/uvd_{dec/enc/bgt}	Unified Video Decoder?	-
/dev/wlanbt	Wireless LAN + Bluetooth	-
/dev/xpt0	XPT Transport Interface	CAM Transport Layer

Platform Security Processor Core (PSP) (MP0)

• All the fun things related to PS5 security are here
• Named AMD SMU PSP (AMD System Management Unit Platform Security Processor) as well
• Named ASP (AMD Secure Processor) as well

System Management Unit (SMU) (MP1)

MP1 (System Management Unit or "SMU") is an xtensa CPU responsible for power management, clock management, sampling sensor data, and other power/thermal-related tasks. The /dev/mp1 device can be used to issue commands to it. Below are known commands.

IOCTL #	Name	Notes
0x4068AE01	MP1_IOCTL_GET_CLK	Get clock frequency
0x8004AE17	MP1_IOCTL_SET_GFXCLK	Set graphics clock frequency
0xC004AE18	MP1_IOCTL_REQUEST_MODE_SWITCH	-
0x8008AE1D	MP1_IOCTL_SET_COREPSTATE	Set core power state?
0xC00CAE1E	MP1_IOCTL_GET_COREPSTATE	Get core power state?

Sensor Fusion Processor (SFP) (MP2)

• It does not exist on PS5 as it is mainly for mobiles.

Trusted Execution Environment (TEE) (MP3)

MP3 consists of the Trusted Execution Environment (TEE) running on the AMD Platform Security Processor. Its primary function is Digital Rights Management (DRM) via PlayReady SL3000. In usermode, the libSceTEEClient library is used for interfacing with it, which internally uses /dev/mp3 to load secure binaries (sbins) and establish sessions. Below are known commands.

IOCTL #	Name	Notes
0x400CB400	TEE_IOC_VERSION	-
0xC010B403	TEE_IOC_INVOKE	Invoke commands
0xC010B402	TEE_IOC_OPEN_SESSION	-
0xC008B404	TEE_IOC_CANCEL	-
0xC010B408	TEE_IOC_DLM_GET_DEBUG_TOKEN	-
0xC028B409	TEE_IOC_DLM_START_TA_DEBUG	-
0xC110B40A	TEE_IOC_DLM_FETCH_DEBUG_STRING	-
0x8008B40B	TEE_IOC_DLM_STOP_TA_DEBUG	-
0x8008B40B	TEE_IOC_INIT_ASD	-
0xC038B40C	TEE_SHM_REGISTER	-
0xC004B40E	TEE_SHM_RELEASE	-
0xC004B40F	TEE_SET_TIMEOUT	-

A53MM/A53IO (MP4)

MP4, which consists of /dev/a53mm, /dev/a53mmsys, and /dev/a53io, is used for various tasks, and its overall purpose is not fully understood. Some of the things it includes are debugging (mdbg), video encode/decode, and other various memory-management related things. Below are known commands.

a53mm

IOCTL #	Name	Notes
0xC004AC01	-	-
0xC030AC02	A53MM_GIVE_DIRECT_MEM_TO_MAPPER	-
0xC030AC03	A53MM_CALL_INDIRECT_BUFFER	-
0xC050AC05	A53MM_MAPPER_VIRTUAL_QUERY	-
0xC038AC06	A53MM_GET_PARAM *	-
0xC018AC07	-	-
0xC004AC08	-	-
0xC018AC09	-	-
0xC010AC0A	-	-
0xC018AC0B	A53MM_MAPPER_QUERY_PA	-
0xC004AC0D	A53MM_WAIT_COMMAND_BUFFER_COMPLETION	-
0xC018AC0E	A53MM_INTERNAL_LOCK_UNLOCK_MAPPER_MEMORY	-
0xC018AC0F	-	-
0xC018AC10	A53MM_GET_USAGE_STATS_DATA	-
0xC004AC11	A53MM_SET_PAGE_TABLE_POOL_OCCUPANCY_THRESHOLD	-
0xC018AC12	A53MM_INTERNAL_TEST_PAGE_MIGRATION	-
0xC004AC13	-	-

a53mmsys

IOCTL #	Name	Notes
0xc020b501	A53MMSYS_INTERNAL_LOCK_UNLOCK_MAPPER_MEMORY	-
0xc028b502	-	-
0xc050b503	-	-
0xc010b504	-	-
0xc028b505	A53MMSYS_MAPPER_GET_INDIRECT_BUFFER_INFO	-
0xc020b506	-	-
0xc018b507	-	-
0xc018b508	A53MMSYS_DEBUG_MAPPER_QUERY_DMEM_OFFSET	-
0xc020b50a	-	-
0xc010b50b	A53MMSYS_DEBUG_GET_AMPR_COUNTER_INFO	-

a53io

IOCTL #	Name	Notes
0x80046101	NAND_A53IO_OPEN	Exposes NAND groups for reading
0x80046102	NAND_A53IO_CLOSE	Closes off NAND groups
0x80046103	NAND_A53IO_SETUP_FLASH_DEVICE	-
0x80046104	NAND_A53IO_DISABLE_CONTROLLER	Disables A53 controller (warning: this will put the console in a bad state)
0x80046105	NAND_A53IO_FORMAT_NVM	Formats NVMe
0x80186111	BFS_A53IO_READ_DEVICE?	-
0xC03861A1	BFS_A53IO_READ_BLOCK	-
0xC03861A2	BFS_A53IO_WRITE_BLOCK	-
0xC01061C1	BFS_A53IO_CREATE_RESERVED_LBA	-
0xC01061C2	BFS_A53IO_DELETE_RESERVED_LBA	-
0xC00C61C5	????	Related to delete logical partitions
0xC01061C8	????	Related to delete logical partitions
0xC02061CA	????	Related to delete logical partitions

Backup and Restore

Backup and Restore (BAR) is used by SceShellCore via /dev/bar. Below are known commands.

IOCTL #	Name	Notes
0xC0684201	BAR_CREATE_CONTEXT	-
0xC0684202	BAR_DESTROY_CONTEXT *	-
0xC0684203	BAR_INIT_CONTEXT	-
0xC0684204	BAR_UPDATE_AAD	-
0xC0684205	BAR_UPDATE_ENCRYPT	-
0xC0684206	BAR_UPDATE_DECRYPT	-
0xC0684207	BAR_FINISH_ENCRYPT	-
0xC0684208	BAR_FINISH_DECRYPT	-

Disc UID

Disc UID (/dev/duid) has its own library (libSceDiscId). It's unknown what this is used for at present. It has two known IOCTLs.

IOCTL #	Name	Notes
0xC0104401	DISC_ID_GET	-
0xC0104402	DISC_ID_GET2	-

Dynamic Library Debug

Dynamic Lib Debug (/dev/dldbg) is used by the library for debugging syscore. Given the name, it's likely used for debugging sprx libs. Below are known commands.

IOCTL #	Name	Notes
0x80084401	DLDBG_STOP_ON_DL_LOAD	-
0x80084402	DLDBG_NO_STOP_ON_DL_LOAD	-
0xC0084403	DLDBG_GET_DL_LOAD_FLAG	-

FTTRM

FTTRM's full purpose is unknown, but it is likely DRM-related. It is used by the Bluray application (BdmvPlayerCore, BdvdPlayerCore, UHDBdPlayerCore) via /dev/fttrm. There are only two known commands.

IOCTL #	Name	Notes
0xC0185301	FTTRM_READ_SECTOR	-
0xC0185302	FTTRM_WRITE_SECTOR	-

ICC Floyd (TPM)

The /dev/icc_floyd is for interacting with the floyd Trusted Platform Module (TPM) over ICC. It only has one known command.

IOCTL #	Name	Notes
0x400EB701	ICC_FLOYD_GET_VERSION	-
0xC010440E	FLOYD_UPDATE_FW	-

Manufacturer Authorization

The /dev/manuauth device seems to be for manufacturer authorization or authentication. It is used in various updaters. Below are known commands.

IOCTL #	Name	Notes
0x40184D01	MANUAUTH_LOAD_SM	Loads the secure module
0x40184D02	MANUAUTH_UNLOAD_SM	Unloads the secure module
0xC0184D03	MANUAUTH_SET_MANU_MODE	Sets manufacturer mode

Namespace Filesystem Control

The Namespace Filesystem (NSFS) is used by Virtual Shell (Vsh) and SceShellCore. It is critical to processes running on the system. Below are known commands.

IOCTL #	Name	Notes
0xC0406E00	NSFS_CREATE_REDIRECT	-
0xC0406E01	NSFS_DELETE_REDIRECT	-
0xC0186E02	NSFS_GET_REDIRECT_STATS	-
0xC0206E03	NSFS_ADD_OVERLAY_TO_NAMESPACE	-
0xC0186E04	NSFS_SET_GLOBAL_EXCLUDE	-

PFS Control

Playstation FileSystem (PFS) Control and /dev/pfsctldev is used internally for VSH. Below are known commands.

IOCTL #	Name	Notes
0x8030B001	DEVPFSCTL_FORMAT	-
0xC0E0B006	DEVPFSCTL_GETFSSTAT	-
0xC040B008	DEVPFSCTL_MOUNT	-
0xC038B009	DEVPFSCTL_UNMOUNT	-
0xC028B00A	DEVPFSCTL_GETEVENT	-
0xC030B00B	DEVPFSCTL_EVENTCOMP	-
0xC020B00C	DEVPFSCTL_CANCELEVENT	-
0xC020B00D	DEVPFSCTL_REGEVENT	-
0xC020B00E	DEVPFSCTL_DEREGEVENT	-
0x8004B00F	DEVPFSCTL_SYSPOWEREVENT	-
0xC008B074	DEVPFSCTL_FSCK	-

PFS Manager

PFS Manager (/dev/pfsmgr) is used by SceShellCore. It handles trophy related tasks, savedata, and keystone verification. Below are known commands.

IOCTL #	Name	Notes
0xC1185001	-	-
0xC1185002	-	-
0xC1185003	-	-
0xC4085004	-	-
0x40845301	-	- trophy related
0xC0845302	-	- savedata related
0x40845303	-	- savedata related
0xC0845304	-	- ???
0xC0845305	-	- ???
0xC0A84B01	-	- ???
0xC0A84B02	PFSMGR_VERIFY_KEYSTONE	-

PUP Updater

The /dev/pup_update0 device is used to perform firmware updates.

IOCTL #	Name	Notes
0xC0104401	PUP_UPDATER_VERIFY_BLS_HEADER	-
0xC0184402	PUP_UPDATER_DECRYPT_HEADER	-
0xC0184403	PUP_UPDATER_VERIFY_ADDITIONAL_SIGN	-
0xC0184404	PUP_UPDATER_VERIFY_WATERMARK	-
0xC0184405	PUP_UPDATER_DECRYPT_SEGMENT	-
0xC0284406	PUP_UPDATER_DECRYPT_SEGMENT_BLOCK	-
0x20004407	PUP_UPDATER_UPDATE_SNVS	-
0xC0104408	PUP_UPDATER_GEN_CHALLENGE	-
0xC018440A	PUP_UPDATER_READ_NAND_GROUP	-
0xC018440B	PUP_UPDATER_WRITE_NAND_GROUP	-
0xC010440C	PUP_UPDATER_IDENTIFY_NAND_CONTROLLER	-
0xC004440D	PUP_UPDATER_IS_FW_OPERATIONAL	-
0xC010440E	PUP_UPDATER_FLOYD_UPDATE_FW	-
0xC001440F	PUP_UPDATER_GET_XTS_KEY_NUM	-
0xC0104410	PUP_UPDATER_VERIFY_RESPONSE	-

Root Param

Root Param is used by SceShellCore to verify root PARAM.SFO files (for PS4) or JSON files (for PS5, aka PPR for ProsPeRo). Below are known commands.

IOCTL #	Name	Notes
0xC0305201	ROOTPARAM_VERIFY_PS4_ROOT_PARAM	-
0xC0305202	ROOTPARAM_VERIFY_PPR_ROOT_PARAM	-
0xC0305203	ROOTPARAM_RESUME_FROM_STANDBY	-

CAM Transport Layer

CAM (Common Access Method) storage subsystem provides a method for implementing drivers to control various known storage devices. Attaches any devices it finds to the appropriate drivers.

IOCTL #	Name	Notes
0xC4E01902	-	related to cam_send_ccb
0xC4E01903	CAMGETPASSTHRU	related to cam_lookup_pass

Wireless LAN and Bluetooth

WLAN and Bluetooth functionality is reachable via /dev/wlanbt. Below are known commands.

IOCTL #	Name	Notes
0x40047400	WLANBT_GET_DEVICE_ID	-