Editing Service Connectors
Jump to navigation
Jump to search
The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then publish the changes below to finish undoing the edit.
| Latest revision | Your text | ||
| Line 29: | Line 29: | ||
! PIN # (24 PIN#) !! Meaning !! Notes | ! PIN # (24 PIN#) !! Meaning !! Notes | ||
|- | |- | ||
| 1 || | | 1 || Ground || Ground Plane | ||
|- | |- | ||
| 2(7) || | | 2(7) || Transmit EMC || Used to send commands to EMC. command always <com>:<chk>\r\n | ||
|- | |- | ||
| 3(6) || | | 3(6) || Receive EMC || Used to recv responses from EMC. response always <res>:<chk>\r\n | ||
|- | |- | ||
| 4(14) || | | 4(14) || titania uart1 tx || titania uart1 tx (bootrom: 460800, eap fw, apu: 230400) | ||
|- | |- | ||
| 5(13) || | | 5(13) || titania uart1 rx || titania uart1 rx (bootrom: 460800, eap fw, apu: 230400) | ||
|- | |- | ||
|} | |} | ||
| Line 43: | Line 43: | ||
== 24 Pins == | == 24 Pins == | ||
* Major credits to shuffle2 for the complete pinout | * Major credits to shuffle2 for the complete pinout | ||
{| class="wikitable sortable" | {| class="wikitable sortable" | ||
| Line 56: | Line 56: | ||
| 4 || GND || Ground Plane | | 4 || GND || Ground Plane | ||
|- | |- | ||
| 5 || | | 5 || emc gpio a1 || pulling low at emc boot causes emc rom to enter uart shell @ 460800 | ||
|- | |- | ||
| 6 || | | 6 || Receive EMC || Used to recv responses from EMC. response always <res>:<chk>\r\n (uart rx emc 115200) | ||
|- | |- | ||
| 7 || | | 7 || Transmit EMC || Used to send commands to EMC. command always <com>:<chk>\r\n (uart tx emc 115200) | ||
|- | |- | ||
| 8 || 3v3 || goes low when | | 8 || 3v3 || goes low when emc resets | ||
|- | |- | ||
| 9 || 0v || 0v | | 9 || 0v || 0v | ||
| Line 68: | Line 68: | ||
| 10 || GND || Ground Plane | | 10 || GND || Ground Plane | ||
|- | |- | ||
| 11 || | | 11 || titania uart0 tx || titania uart0 tx (efc fw: 460800) | ||
|- | |- | ||
| 12 || | | 12 || titania uart0 rx || titania uart0 rx (efc fw: 460800) | ||
|- | |- | ||
| 13 || FC_UART2_RX || | | 13 || FC_UART2_RX || titania uart1 rx (bootrom: 460800, eap fw, apu: 230400) | ||
|- | |- | ||
| 14 || FC_UART2_TX || | | 14 || FC_UART2_TX || titania uart1 tx (bootrom: 460800, eap fw, apu: 230400) | ||
|- | |- | ||
| 15 || GND || Ground Plane | | 15 || GND || Ground Plane | ||
| Line 84: | Line 84: | ||
| 18 || 5v || 5v | | 18 || 5v || 5v | ||
|- | |- | ||
| 19 || emc gpio a49 || | | 19 || emc gpio a49 || emc gpio a49 | ||
|- | |- | ||
| 20 || emc gpio a27 || | | 20 || emc gpio a27 || emc gpio a27. main power switch | ||
|- | |- | ||
| 21 || i2c data || i2c data (i2c_bus_4) | | 21 || i2c data || i2c data (i2c_bus_4) | ||
|- | |- | ||
| 22 || i2c clock || | | 22 || i2c clock || (i2c_bus_4) | ||
|- | |- | ||
| 23 || GND || Ground Plane | | 23 || GND || Ground Plane | ||
|- | |- | ||
| 24 || /SSB_RESET || | | 24 || /SSB_RESET || emc reset# | ||
|} | |} | ||