Editing Service Connectors

Jump to navigation Jump to search
Warning: You are not logged in. Your IP address will be publicly visible if you make any edits. If you log in or create an account, your edits will be attributed to your username, along with other benefits.

The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then publish the changes below to finish undoing the edit.

Latest revision Your text
Line 27: Line 27:
{| class="wikitable sortable"
{| class="wikitable sortable"
|-
|-
! PIN # (24 PIN#) !! Meaning !! Notes
! PIN !! Meaning !! Notes
|-
|-
| 1 || Ground || Ground Plane
| GND || Ground || Ground Plane
|-
|-
| 2(7) || Transmit EMC || Used to send commands to EMC. command always <com>:<chk>\r\n
| TX EMC || Transmit EMC || Used to send commands to EMC. command always <com>:<chk>\r\n
|-
|-
| 3(6) || Receive EMC || Used to recv responses from EMC. response always <res>:<chk>\r\n
| RX EMC || Receive EMC || Used to recv responses from EMC. response always <res>:<chk>\r\n
|-
|-
| 4(14) || titania uart1 tx || titania uart1 tx (bootrom: 460800, eap fw, apu: 230400)  
| titania uart1 tx || titania uart1 tx || titania uart1 tx (bootrom: 460800, eap fw, apu: 230400)  
|-
|-
| 5(13) || titania uart1 rx || titania uart1 rx (bootrom: 460800, eap fw, apu: 230400)  
| titania uart1 rx || titania uart1 rx || titania uart1 rx (bootrom: 460800, eap fw, apu: 230400)  
|-
|-
|}
|}
Line 46: Line 46:


{| class="wikitable sortable"
{| class="wikitable sortable"
! PIN # !! Meaning !! Notes
! PIN !! Meaning !! Notes
|-
|-
| 1 || VDD || 5v
| VDD || VDD || 5v
|-
|-
| 2 || VDD || 5v
| VDD || VDD || 5v
|-
|-
| 3 || GND || Ground Plane
| GND || GND || Ground Plane
|-
|-
| 4 || GND || Ground Plane
| GND || GND || Ground Plane
|-
|-
| 5 || emc gpio a1 || pulling low at emc boot causes emc rom to enter uart shell @ 460800
| emc gpio a1 || emc gpio a1 || pulling low at emc boot causes emc rom to enter uart shell @ 460800
|-
|-
| 6 || Receive EMC || Used to recv responses from EMC. response always <res>:<chk>\r\n (uart rx emc 115200)
| RX EMC || Receive EMC || Used to recv responses from EMC. response always <res>:<chk>\r\n (uart rx emc 115200)
|-
|-
| 7 || Transmit EMC || Used to send commands to EMC. command always <com>:<chk>\r\n (uart tx emc 115200)
| TX EMC || Transmit EMC || Used to send commands to EMC. command always <com>:<chk>\r\n (uart tx emc 115200)
|-
|-
| 8 || 3v3 || goes low when emc resets
| 3v3 || 3v3 || goes low when emc resets
|-
|-
| 9 || 0v || 0v
| 0v || 0v || 0v
|-
|-
| 10 || GND || Ground Plane
| GND || GND || Ground Plane
|-
|-
| 11 || titania uart0 tx || titania uart0 tx (efc fw: 460800)
| titania uart0 tx || titania uart0 tx || titania uart0 tx (efc fw: 460800)
|-
|-
| 12 || titania uart0 rx || titania uart0 rx (efc fw: 460800)
| titania uart0 rx || titania uart0 rx || titania uart0 rx (efc fw: 460800)
|-
|-
| 13 || titania uart1 rx || titania uart1 rx (bootrom: 460800, eap fw, apu: 230400)
| titania uart1 rx || titania uart1 rx || titania uart1 rx (bootrom: 460800, eap fw, apu: 230400)
|-
|-
| 14 || titania uart1 tx || titania uart1 tx (bootrom: 460800, eap fw, apu: 230400)
| titania uart1 tx || titania uart1 tx || titania uart1 tx (bootrom: 460800, eap fw, apu: 230400)
|-
|-
| 15 || GND || Ground Plane
| GND || GND || Ground Plane
|-
|-
| 16 || emc gpio c5 || ("GPI SW" (only used if devif_det# active))
| emc gpio c5 || emc gpio c5 || ("GPI SW" (only used if devif_det# active))
|-
|-
| 17 || 0v || 0v
| 0v || 0v || 0v
|-
|-
| 18 || 5v || 5v
| 5v || 5v || 5v
|-
|-
| 19 || emc gpio a49 || emc gpio a49
| emc gpio a49 || emc gpio a49 || emc gpio a49
|-
|-
| 20 || emc gpio a27 || emc gpio a27. main power switch
| emc gpio a27 || emc gpio a27 || emc gpio a27. main power switch
|-
|-
| 21 || i2c data || i2c data (i2c_bus_4)
| i2c data || i2c data || i2c data (i2c_bus_4)
|-
|-
| 22 || i2c clock || (i2c_bus_4)
| i2c clock || i2c clock || (i2c_bus_4)
|-
|-
| 23 || GND || Ground Plane
| GND || GND || Ground Plane
|-
|-
| 24 || emc reset# || emc reset#
| emc reset# || emc reset# || emc reset#
|}
|}
Please note that all contributions to PS5 Developer wiki are considered to be released under the GNU Free Documentation License 1.2 (see PS5 Developer wiki:Copyrights for details). If you do not want your writing to be edited mercilessly and redistributed at will, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource. Do not submit copyrighted work without permission!

To protect the wiki against automated edit spam, we kindly ask you to solve the following hCaptcha:

Cancel Editing help (opens in new window)
Retrieved from "http://www.psdevwiki.com/ps5/Service_Connectors"