Editing CXD90061GG

Jump to navigation Jump to search
Warning: You are not logged in. Your IP address will be publicly visible if you make any edits. If you log in or create an account, your edits will be attributed to your username, along with other benefits.

The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then publish the changes below to finish undoing the edit.

Latest revision Your text
Line 1: Line 1:
[[File:CXD90061GG.png|thumb|SIE CXD90061GG]]
EMC/EAP Chip (with SysCon bundled?)
EMC/EAP Chip (with SysCon bundled?)


* Credit to dan2wik for the third , fourth and fifth picture
* Credit to dan2wik for the third , fourth and fifth picture
* Mediatek 3613 Chip
 
* Codename Salina
= Pictures =
 
[[File:CXD90061GG.png]]
[[File:CXD90061GG_Proto.png]]
[[File:Image.png]]
[[File:Image2.png]]
[[File:Image3.png]]


= Pinout =
= Pinout =
Line 62: Line 67:
|1.15V_SS_PG3_SATA1
|1.15V_SS_PG3_SATA1
|
|
|Sata1 PHY supply
|
|-
|-
|A10
|A10
Line 74: Line 79:
|3.3V_SS_SATA_PG3
|3.3V_SS_SATA_PG3
|
|
|Sata1 Core supply
|
|-
|-
|A13
|A13
Line 80: Line 85:
|D90_SSB_USB2_DPLS
|D90_SSB_USB2_DPLS
|
|
|USB 2.0 Port2 D+
|
|-
|-
|A15
|A15
Line 86: Line 91:
|/FC_CLK_REQ_N
|/FC_CLK_REQ_N
|
|
|Flash Controller clock request
|
|-
|-
|A16
|A16
Line 116: Line 121:
|3.3V_SS_PG1_XTAL
|3.3V_SS_PG1_XTAL
|
|
|Supply for PLL for EMC
|
|-
|-
|B3
|B3
Line 176: Line 181:
|D90_SSB_USB2_DMNS
|D90_SSB_USB2_DMNS
|
|
|USB 2.0 Port2 D-
|
|-
|-
|B14
|B14
Line 182: Line 187:
|N/C (?)
|N/C (?)
|
|
|Test point only (?) USB Port2 overcurrent det.
|Test point only (?)
|-
|-
|B15
|B15
Line 188: Line 193:
|/SSB_WIFI_CLKREQ
|/SSB_WIFI_CLKREQ
|
|
|Wifi PCI-e clock request
|
|-
|-
|B16
|B16
Line 200: Line 205:
|SSB_GPI
|SSB_GPI
|
|
|Interrupt for optional external ethernet PHY
|
|-
|-
|B18
|B18
Line 224: Line 229:
|1.8V_SS_PG1_CLK
|1.8V_SS_PG1_CLK
|
|
|Supply for 27MHz clock gen for Flava
|
|-
|-
|C4
|C4
Line 290: Line 295:
|SSB_USB2_POWEREN
|SSB_USB2_POWEREN
|
|
|USB Port 2 power enable signal
|
|-
|-
|C15
|C15
Line 302: Line 307:
|PSW_PDC
|PSW_PDC
|
|
|USB C PD controller power enable signal (remapped)
|
|-
|-
|C17
|C17
Line 308: Line 313:
|/HDMI_RESET
|/HDMI_RESET
|
|
|Flava reset signal
|
|-
|-
|C18
|C18
|GPIOC_1
|GPIOC_1
|CL5127
|PSW_MSOC_PGA2
|
|
|
|Test pad only.
|-
|-
|D1
|D1
Line 329: Line 334:
|-
|-
|D3
|D3
|CK27M_HDMI
|AVDD33_XTAL
|S50G_HDMI_SYSCLK
|3.3V_SS_PG1_XTAL
|
|
|
|27MHz clock for Flava
|-
|-
|D4
|D4
Line 350: Line 355:
|NC (?)
|NC (?)
|
|
|Test point only (?)  
|Test point only (?)
|-
|-
|D7
|D7
Line 392: Line 397:
|3.3V_SS_SUSB_PG3
|3.3V_SS_SUSB_PG3
|
|
|Supply for the USB Port 2 PHY and core
|
|-
|-
|D14
|D14
Line 422: Line 427:
|THERMISTOR_3
|THERMISTOR_3
|[[File:IC-Pin-in.png|frameless]]
|[[File:IC-Pin-in.png|frameless]]
|Signal for Thermistor located near SSD PMIC
|
|-
|-
|E1
|E1
Line 428: Line 433:
|3.3V_SS_PG1_XTAL
|3.3V_SS_PG1_XTAL
|
|
|Supply for 25MHz oscillator driver
|
|-
|-
|E2
|E2
Line 434: Line 439:
|3.3V_SS_PG2
|3.3V_SS_PG2
|
|
|Supply for the General purpose PLL cluster
|
|-
|-
|E3
|E3
Line 500: Line 505:
|THERMISTOR_1
|THERMISTOR_1
|
|
|Signal for Thermistor located between PSU spike and APU
|
|-
|-
|E17
|E17
Line 506: Line 511:
|THERMISTOR_2
|THERMISTOR_2
|
|
|Signal for Thermistor located on LED Board
|
|-
|-
|F3
|F3
Line 512: Line 517:
|D85_FC_TX0P
|D85_FC_TX0P
|
|
|PCI-e Gen3 RX+ from flash controller.
|
|-
|-
|F4
|F4
Line 518: Line 523:
|D85_FC_TX0N
|D85_FC_TX0N
|
|
|PCI-e Gen3 RX- from flash controller.
|
|-
|-
|F5
|F5
Line 554: Line 559:
|FAN_PWM_1
|FAN_PWM_1
|
|
|Fan speed PWM signal
|
|-
|-
|F14
|F14
Line 578: Line 583:
|GND
|GND
|[[File:IC-Pin-in.png|frameless]]
|[[File:IC-Pin-in.png|frameless]]
|ADC Ground reference
|Ground
|-
|-
|F18
|F18
Line 584: Line 589:
|3.3V_SS_PG1_XTAL
|3.3V_SS_PG1_XTAL
|
|
|ADC Supply reference
|
|-
|-
|G1
|G1
Line 590: Line 595:
|D85_FC_RX0P
|D85_FC_RX0P
|
|
|PCI-e Gen3 TX+ to flash controller.
|
|-
|-
|G2
|G2
Line 596: Line 601:
|D85_FC_RX0N
|D85_FC_RX0N
|
|
|PCI-e Gen3 TX- to flash controller.
|
|-
|-
|G3
|G3
Line 614: Line 619:
|1.15V_SS_PG2
|1.15V_SS_PG2
|
|
|Supply for PCI-e Gen 3 RX PHY
|
|-
|-
|G6
|G6
Line 620: Line 625:
|1.15V_SS_PG2
|1.15V_SS_PG2
|
|
|Supply for PCI-e Gen 3 TX PHY
|
|-
|-
|G7
|G7
Line 656: Line 661:
|BUZZER_PWM
|BUZZER_PWM
|
|
|Buzzer signal output
|
|-
|-
|G13
|G13
Line 668: Line 673:
|D100G_WIFI_PCIE_CLK_P
|D100G_WIFI_PCIE_CLK_P
|
|
|PCI-e Clock+ to wifi with Spread Spectrum Clocking.
|
|-
|-
|G15
|G15
Line 674: Line 679:
|D100G_WIFI_PCIE_CLK_N
|D100G_WIFI_PCIE_CLK_N
|
|
|PCI-e Clock- to wifi with Spread Spectrum Clocking.
|
|-
|-
|G16
|G16
Line 686: Line 691:
|D85_WIFI_RX0P
|D85_WIFI_RX0P
|
|
|PCI-e gen1 RX+ from Wifi module.
|
|-
|-
|G18
|G18
Line 692: Line 697:
|D85_WIFI_RX0N
|D85_WIFI_RX0N
|
|
|PCI-e gen1 RX- from Wifi module.
|
|-
|-
|H3
|H3
Line 698: Line 703:
|D100G_M2_PCIE_CLK_P
|D100G_M2_PCIE_CLK_P
|
|
|PCI-e Clock+ to M.2 slot
|
|-
|-
|H4
|H4
Line 704: Line 709:
|D100G_M2_PCIE_CLK_N
|D100G_M2_PCIE_CLK_N
|
|
|PCI-e Clock- to M.2 slot
|
|-
|-
|H5
|H5
Line 746: Line 751:
|3.3V_SS_PG2
|3.3V_SS_PG2
|
|
|Supply for PCI-e G1 clock PHYs and core
|
|-
|-
|H14
|H14
Line 752: Line 757:
|1.15V_SS_PG2
|1.15V_SS_PG2
|
|
|Supply for PCI-e G1 RX/TX PHYs
|
|-
|-
|H15
|H15
Line 1,024: Line 1,029:
|Ground
|Ground
|-
|-
|L14
|GPIOA_44
|DISC_CHUCK
|
|
|-
|L15
|GPIOA_54
|BD_GEN1
|
|
|-
|L16
|GPIOA_47
|MC_ALIVE
|
|
|-
|L17
|GPIOA_1
|SSB_BOOT_STRAP_1
|
|
|-
|M1
|AVDD11_CKM
|1.15V_SS_PG
|
|
|-
|M2
|VSS_M2
|GND
|[[File:IC-Pin-in.png|frameless]]
|Ground
|-
|M3
|SPIS_MISO/SPIM_MOSI/GPIOA_5
|SSB_SPIM_MOS
|
|
|-
|M4
|SPIS_CS/SPIM_CS/GPIOA_7
|/FC_SPI_CS
|
|
|-
|M5
|RTC_XI
|
|
|Goes to 32.768kH crystal oscillator
|-
|M6
|RTC_XO
|
|
|Goes to 32.768kH crystal oscillator
|-
|M7
|SWD_SWDIO
|N/C
|
|Test point only (?)
|-
|M8
|VSS_M8
|GND
|[[File:IC-Pin-in.png|frameless]]
|Ground
|-
|M9
|GPIOA_21
|PSW_MSOC_PGB
|
|
|-
|M10
|VSS_M10
|GND
|[[File:IC-Pin-in.png|frameless]]
|Ground
|-
|M11
|I2C3_SDA/GPIOA_58
|SOC_I2C_SDA
|
|
|-
|M12
|USB1_OVERC
|
|
|Test point only (?)
|-
|M13
|GPIOA_38
|/FC_SPI_S_INT
|
|
|-
|M14
|GPIOA_52
|/SOC_ALERT
|
|SoC thermal trip (over heating)
|-
|M15
|GPIOA_53
|/AC_POW_FAIL
|
|
|-
|M16
|GPIOA_55
|/EJECT_BTN
|
|
|-
|M17
|GPIOA_56
|/HDMI_IRQ
|
|HDMI Interrupt
|-
|M18
|GPIOA_45
|DISC_OUT8_SW
|
|
|-
|N3
|SPIS_MOSI/SPIM_MISO/GPIOA_4
|SSB_SPIM_MISO
|
|
|-
|N4
|SPIS_CLK/SPIM_CLK/GPIOA_6
|SSB_SPIM_CLK
|
|
|-
|N5
|GPIOD_1
|
|
|Test point only (?)
|-
|N6
|SWD_SWCLK
|
|
|Test point only (?)
|-
|N7
|SWV_SWO
|
|
|Test point only (?)
|-
|N8
|GPIOA_17
|PSW_BD
|
|
|-
|N9
|I2C4_SDA/GPIOA_60
|GP_I2C_SDA
|
|
|-
|N10
|I2C4_SCL/GPIOA_61
|GP_I2C_SCL
|
|
|-
|N11
|I2C3_SCL/GPIOA_59
|SOC_I2C_SCL
|
|
|-
|N12
|USB1_POWER_EN
|
|
|Test point only (?)
|-
|N13
|GPIOA_23
|
|
|Test point only (?)
|-
|N14
|GPIOA_48
|/USB_SUS_OC
|
|
|-
|N15
|GPIOA_51
|/SOC_THERMTRIP
|
|
|-
|N16
|GPIOA_50
|/BD_DETECT
|
|
|-
|N17
|GPIOA_39
|WM_WOBT
|
|
|-
|N18
|GPIOA_43
|DCDC_PGOOD
|
|
|-
|P1
|DVCCIO_GROUP_D
|3.3V_SS_PG1
|
|
|-
|P2
|SPIS_INT/GPIOA_8
|/FLOYD_SPI_CS
|
|
|-
|P3
|GPIOD_4
|
|
|Test point only (?)
|-
|P4
|GPIOD_0
|SOC_SYNCFLOOD
|
|
|-
|P5
|GPIOD_6
|
|
|Test point only (?)
|-
|P6
|GPIOD_2
|
|
|Test point only (?)
|-
|P7
|GPIOD_10
|
|
|Test point only (?)
|-
|P8
|GPIOA_18
|
|
|Test point only (?)
|-
|P9
|VSS_P9
|GND
|[[File:IC-Pin-in.png|frameless]]
|Ground
|-
|P11
|AVDD33_USB_10
|3.3V_SS_SUSB_PG3
|
|
|Supply for the USB Port 0/1 Core and PHY
|-
|P12
|USB0_POWER_EN
|PSW_MSOC_PGA3
|
|
|
|
|-
|P13
|GPIOA_28
|/WM_PERST
|
|
|
|
|-
|-
|P14
|GPIOA_25
|VDDCR_SOC_VSEL2
|
|
|
|-
|P15
|GPIOA_49
|/DEVIF_DET
|
|
|
|
|-
|P16
|UART1_RX/GPIOA_3
|SSB_UART2_RX
|
|
|
|
|-
|-
|P17
|UART1_TX/GPIOA_2
|SSB_UART2_TX
|
|
|
|
|-
|R1
|GPIOD_9
|
|
|
|
|Test point only (?)
|-
|R2
|GPIOD_12
|
|
|
|Test point only (?)
|-
|-
|R3
|GPIOD_8
|
|
|
|Test point only (?)
|-
|R4
|GPIOD_5
|
|
|
|
|Test point only (?)
|-
|R5
|GPIOD_3
|
|
|
|
|Test point only (?)
|-
|-
|R6
|GPIOD_7
|
|
|
|
|Test point only (?)
|-
|R7
|GPIOA_15
|PSW_HDMI_5V
|
|
|
|-
|R8
|VSS_R8
|GND
|[[File:IC-Pin-in.png|frameless]]
|Ground
|-
|R9
|AVDD11_SATA_0
|1.15V_SS_PG3_SATA0
|
|
|
|
|-
|-
|R10
|AVDD33_SATA_0
|3.3V_SS_SATA_PG3
|
|
|
|-
|R11
|VSS_R11
|GND
|[[File:IC-Pin-in.png|frameless]]
|Ground
|-
|R12
|USB0_OVERC
|
|
|Test point only (?)
|-
|R13
|GPIOA_35
|/BD_P_OFF_REQ
|
|
|-
|R14
|GPIOA_37
|PSW_M2
|
|
|-
|R15
|GPIOA_31
|FC_BOOT_CPU_SEL
|
|
|-
|R16
|ATEST
|
|
|Test point only (?)
|-
|R17
|UART0_RX
|SSB_UART0_RX
|
|
|-
|R18
|UART0_TX
|SSB_UART0_TX
|
|
|-
|T1
|GPIOD_13
|SSB_GPO0
|
|
|-
|T2
|GPIOD_11
|
|
|Test point only (?)
|-
|T3
|I2C0_SDA/GPIOD_14
|SOC_USBC_I2C_SDA
|
|
|-
|T4
|GPIOA_12
|
|
|Test point only (?)
|-
|T5
|GPIOA_13
|PSW_MDCDC
|
|
|-
|T6
|GPIOA_16
|PSW_SSB_1
|
|
|-
|T7
|GPIOA_19
|PSW_USB
|
|
|-
|T8
|SATA_0_RXP
|
|
|
|
|Test point only (?)
|-
|T9
|VSS_T9
|GND
|[[File:IC-Pin-in.png|frameless]]
|Ground
|-
|T10
|VSS_T10
|GND
|[[File:IC-Pin-in.png|frameless]]
|Ground
|-
|T11
|USB_0_DM
|
|
|
|
|Test point only (?)
|-
|T12
|VSS_T12
|GND
|[[File:IC-Pin-in.png|frameless]]
|Ground
|-
|-
|T13
|GPIOA_26
|/FLOYD_RST
|
|
|
|-
|T14
|GPIOA_30
|FC_MANU_MODE_SEL
|
|
|
|
|-
|T15
|GPIOA_32
|SOC_PWROK_S5
|
|
|
|
|-
|-
|T16
|GPIOA_29
|/FC_RESET
|
|
|
|
|-
|T17
|TESTMODE
|GND
|[[File:IC-Pin-in.png|frameless]]
|Ground
|-
|T18
|RESET
|/SSB_RESET
|
|
|
|-
|U1
|VSS_U10
|GND
|[[File:IC-Pin-in.png|frameless]]
|Ground
|-
|U2
|I2C0_SCL/GPIOD_15
|SOC_USBC_I2C_SCL
|
|
|
|
|-
|-
|U3
|I2C1_SDA/GPIOD_16
|SSB_USB_I2C_SDA
|
|
|
|-
|U4
|GPIOA_9
|
|
|
|
|Test point only (?)
|-
|U5
|GPIOA_11
|
|
|
|
|Test point only (?)
|-
|-
|U6
|GPIOA_14
|PSW_HDMI_MAIN
|
|
|
|
|-
|U7
|VSS_U7
|GND
|[[File:IC-Pin-in.png|frameless]]
|Ground
|-
|U8
|SATA_0_RXN
|
|
|
|
|Test point only (?)
|-
|U9
|SATA_0_TXN
|
|
|
|Test point only (?)
|-
|-
|U10
|VSS_U10
|GND
|[[File:IC-Pin-in.png|frameless]]
|Ground
|-
|U11
|USB_0_DP
|
|
|
|Test point only (?)
|-
|U12
|USB_1_DM
|
|
|
|
|Test point only (?)
|-
|U13
|GPIOA_24
|VDDCR_SOC_VSEL1
|
|
|
|
|-
|-
|U14
|GPIOA_33
|SOC_PWROK
|
|
|test
|
|
|-
|U15
|GPIOA_34
|/SOC_RESET
|
|
|
|
|-
|-
|U16
|GPIOA_27
|/WM_HW_RESET
|
|
|
|
|-
|U17
|GPIOA_40
|/VDDNB_VRM_POWFAIL
|
|
|
|-
|U18
|NC_U18
|N/C
|[[File:Pin-nc.png|frameless]]
|Not connected
|-
|V1
|NC_V1
|N/C
|[[File:Pin-nc.png|frameless]]
|Not connected
|-
|V2
|NC_V2
|N/C
|[[File:Pin-nc.png|frameless]]
|Not connected
|-
|V3
|I2C1_SCL/GPIOD_17
|SSB_USB_I2C_SCL
|
|
|
|
|-
|-
|V4
|GPIOA_10
|
|
|
|Test point only (?)
|-
|V6
|GPIOA_20
|PSW_MSOC_PGA
|
|
|
|
|-
|V7
|GPIOA_22
|PSW_MSOC_PGC
|
|
|
|
|-
|-
|V9
|SATA_0_TXP
|
|
|
|Test point only (?)
|-
|V10
|DVCCIO_GROUP_C0
|3.3V_SS_PG1
|
|
|
|
|-
|V12
|USB_1_DP
|
|
|
|
|Test point only (?)
|-
|-
|V13
|DVCCIO_GROUP_A1
|3.3V_SS_PG1
|
|
|
|
|-
|V15
|GPIOA_36
|/BD_EJECT
|
|
|
|
|-
|V16
|GPIOA_41
|/VDD_VRM_POW_FAIL
|
|
|
|-
|V17
|NC_V17
|N/C
|[[File:Pin-nc.png|frameless]]
|Not connected
|-
|V18
|NC_V18
|N/C
|[[File:Pin-nc.png|frameless]]
|Not connected
|}
|}
= Pictures =
[[File:CXD90061GG.png|253x253px]]
[[File:CXD90061GG_Proto.png|452x452px]]
[[File:Image.png|frameless|252x252px]]
[[File:Image2.png|254x254px]]
[[File:Image3.png|269x269px]]
Please note that all contributions to PS5 Developer wiki are considered to be released under the GNU Free Documentation License 1.2 (see PS5 Developer wiki:Copyrights for details). If you do not want your writing to be edited mercilessly and redistributed at will, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource. Do not submit copyrighted work without permission!

To protect the wiki against automated edit spam, we kindly ask you to solve the following hCaptcha:

Cancel Editing help (opens in new window)
Retrieved from "http://www.psdevwiki.com/ps5/CXD90061GG"