SPIway: Difference between revisions
Jump to navigation
Jump to search
m (→Pinout) |
CelesteBlue (talk | contribs) No edit summary |
||
| (6 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
== SPIway == | == SPIway == | ||
SPIway - Teensy++ 2.0 SPI flasher for PS4 | SPIway - Teensy++ 2.0 SPI flasher for PS4 | ||
Source: https://github.com/hjudges/NORway | Source: [https://github.com/hjudges/NORway NORway on github] | ||
=== Pinout === | === Pinout === | ||
<div style="float:right">[[File:MX25L1006E Pinout.png|200px|thumb|left|[[MX25L1006E]] Pinout]]<br />[[File:25X10CLYA1 Pinout.png|200px|thumb|left|[[25X10CLYA1]] Pinout]]<br />[[File:MX25L25635FMI-10G Pinout.png|200px|thumb|left|[[MX25L25635FMI-10G]] Pinout]]<br /> | <div style="float:right">[[File:MX25L1006E Pinout.png|200px|thumb|left|Macronix [[MX25L1006E]] Pinout]]<br />[[File:25X10CLYA1 Pinout.png|200px|thumb|left|Winbond [[25X10CLYA1]] Pinout]]<br />[[File:25Q80BV Pinout.png|200px|thumb|left|Winbond [[25Q80BV]] Pinout]]<br />[[File:MX25L25635FMI-10G Pinout.png|200px|thumb|left|Macronix [[MX25L25635FMI-10G]] Pinout]]<br />[[File:SPIway-020.jpg|200px|thumb|left|Teensy 2.0++ SPIway Pinout]]</div> | ||
[[File:SPIway.jpg|200px|thumb|left|Teensy 2.0++ SPIway Pinout]]</div> | |||
{| border="1" cellspacing="0" cellpadding="5" border="#999" class="wikitable" style="border:1px solid #999; border-collapse: collapse;" | {| border="1" cellspacing="0" cellpadding="5" border="#999" class="wikitable" style="border:1px solid #999; border-collapse: collapse;" | ||
|- bgcolor="#cccccc" | |- bgcolor="#cccccc" | ||
| Line 48: | Line 48: | ||
Use short wires, esp. if you are not adding the 0.1{{micro}}F capacitor between ground and vcc as close as possible to the chip | Use short wires, esp. if you are not adding the 0.1{{micro}}F capacitor between ground and vcc as close as possible to the chip | ||
=== Changelog === | |||
* v0.10 | |||
** Initial release | |||
** Support for Macronix [[MX25L25635FMI-10G]] and [[MX25L25635FZ2I-10G]] | |||
* v0.20 | |||
** Added README | |||
** Added support for Macronix [[MX25L1006E]] | |||
** Added support for Winbond [[W25X10CL]] | |||
* v0.30 | |||
** Added support for Winbond [[W25Q80BV]] (thx to "Socketz"!) | |||
=== Usage Examples === | |||
[[File:Ps4norflashing.jpg|200px|thumb|left|The easiest ways!]][[File:Ps4norflashing2.jpg|200px|thumb|left|Required equipment]] | |||
{{ | {{Hardware Modification}} | ||
<noinclude>[[Category:Main]]</noinclude> | <noinclude>[[Category:Main]]</noinclude> | ||
Latest revision as of 02:18, 7 March 2021
SPIway[edit | edit source]
SPIway - Teensy++ 2.0 SPI flasher for PS4
Source: NORway on github
Pinout[edit | edit source]
Macronix MX25L1006E Pinout
Winbond 25X10CLYA1 Pinout
Winbond 25Q80BV Pinout
Macronix MX25L25635FMI-10G Pinout
| 8-Pin | 16-pin | Usage | Teensy++ 2.0 SPIway |
Description |
|---|---|---|---|---|
| - | 1 | SIO3 | B5 | 8pin: Not Available - not used / 16pin: Serial Data Input & Output (for 4xI/O read mode) |
| 8 | 2 | VCC | +5V pad | +3V DC Power Supply |
| 7 | 3 | HOLD#/RESET# | B6 | 8pin: Hold, to pause the device without deselecting the device / 16pin: Hardware Reset Pin Active low |
| - | 4 | NC | NC | No Connection |
| - | 5 | NC | NC | No Connection |
| - | 6 | NC | NC | No Connection |
| 1 | 7 | CS# | B0 | Chip Select |
| 2 | 8 | SO/SIO1 | B3 | Serial Data Output (for 1 x I/O) or Serial Data Input & Output (for 2x I/O or 4x I/O read mode) |
| 3 | 9 | WP#/SIO2 | B4 | Write Protection: connect to GND or Serial Data Input & Output (for 4x I/O read mode) |
| 4 | 10 | GND | GND | Ground |
| - | 11 | NC | NC | No Connection |
| - | 12 | NC | NC | No Connection |
| - | 13 | NC | NC | No Connection |
| - | 14 | NC | NC | No Connection |
| 5 | 15 | SI/SIO0 | B2 | Serial Data Input (for 1 x I/O) or Serial Data Input & Output (for 2x I/O or 4x I/O read mode) |
| 6 | 16 | SCLK | B1 | Clock Input |
Use short wires, esp. if you are not adding the 0.1µF capacitor between ground and vcc as close as possible to the chip
Changelog[edit | edit source]
- v0.10
- Initial release
- Support for Macronix MX25L25635FMI-10G and MX25L25635FZ2I-10G
- v0.20
- Added README
- Added support for Macronix MX25L1006E
- Added support for Winbond W25X10CL
- v0.30
- Added support for Winbond W25Q80BV (thx to "Socketz"!)
Usage Examples[edit | edit source]
| |||||||||||||||||||||||||||||||
