PFS

PFS (Pseudo/Playstation File System) is the file system used by (at least) downloadable content and games on the PS4. It is loosely based on the UFS (Unix File System) used in FreeBSD. PFS typically uses a 64kB block size, although the block size is configurable and specified in the file system header. The minimum block size is 4kB, and the maximum is 32MiB; the block size must be a power of 2.

Structure

There are four main sections in PFS:

• Header (superblock)
• Inode blocks
• Directory blocks
• Data blocks

Header/Superblock

Offset	Value	Size	Notes
0x00	version	0x8	Always 1
0x08	format	0x8	Always 20130315
0x10	id	0x8
0x18	fmode	0x1
0x19	clean	0x1
0x1A	ronly	0x1	If 1, this is a readonly filesystem
0x1B	rsv	0x1
0x1C	mode	0x2	Bit 0 = signed/unsigned, Bit 1 = 32/64 bit inodes
0x1E	unknown	0x2
0x20	blocksz	0x4	The size of each block in the filesystem
0x24	nbackup	0x4	Seems to always be 0
0x28	nblock	0x8	Seems to always be 1
0x30	ndinode	0x8	Number of inodes in the inode blocks
0x38	ndblock	0x8	Number of data blocks
0x40	ndinodeblock	0x8	Number of inode blocks
0x48	superroot_ino	0x8

typedef struct {
    int64 version;
    int64 magic;
    int32 id[2];
    char fmode;
    char clean;
    char ronly;
    char rsv;
    int16 mode;
    int16 unk1;
    int32 blocksz;
    int32 nbackup;
    int64 nblock;
    int64 ndinode;
    int64 ndblock;
    int64 ndinodeblock;
    int64 superroot_ino;
} PFS_HDR;

Inodes

Inode table starts at the second block and continues for header.ndinodeblock blocks. There are only header.blocksz / sizeof(di_d32) inodes per block. (inodes will never cross a block boundary)

For an explanation of inodes, direct and indirect blocks, see inode pointer structure on Wikipedia. Most PFS images from PKGs have just one direct block pointer per file, and the file's data just takes up consecutive blocks. But if there is fragmentation on the file system, you will have to follow the direct and indirect block pointers.

There are actually 4 types of inodes that can be used in a PFS image, and the type is determined by the low two bits of themode field in the superblock. Most PFS images that you see, such as pfs_image.dat, will be using mode 0, which refers to non-signed 32-bit inodes.

Offset	Value	Size	Notes
0x00	mode	0x2	Inode mode (bitwise OR of flags; file=0x8000, directory=0x4000), low 9 bits are file permissions
0x02	nlink	0x2	Number of links to this inode. For files, this is 1. For dirs, this is 1 plus the number of subdirectories (the .. entry links to the subdir's parent, increasing its nlink count).
0x04	flags	0x4	Bitfield of flags for compressed, readonly, etc.
0x08	size	0x8	Size in bytes of the entity
0x10	size_compressed	0x8	same as size for uncompressed PFS
0x18	times	0x30	Four 64-bit unix timestamps, followed by four 32-bit zeroes, which may be nanoseconds.
0x48	uid	0x4	User ID (zero for game PFS images at least)
0x4C	gid	0x4	Group ID (zero for game PFS images at least)
0x50	spare	0x10	Probably the same as di_spare, always 0
0x60	blocks	0x4	Number of blocks occupied
0x64	db	0x30	Direct blocks
0x94	ib	0x14	Indirect blocks

typedef struct {
    // bitfields are from LSB to MSB
    struct {
        uint16 o_exec : 1;
        uint16 o_write : 1;
        uint16 o_read : 1;
        uint16 g_exec : 1;
        uint16 g_write : 1;
        uint16 g_read : 1;
        uint16 u_exec : 1;
        uint16 u_write : 1;
        uint16 u_read : 1;
        uint16 unk : 5;
        uint16 dir : 1;
        uint16 file : 1;
    } mode;
    uint16 nlink;
    struct {
        uint compressed : 1;
        uint unk : 3;
        uint readonly : 1;
        uint unk2 : 12;
        uint internal : 1;
    } flags;
    uint64 size;
    uint64 size_compressed;
    struct { 
        uint64 unix_time[4];
        uint32 time_nsec[4];
    } times;
    uint32 uid;
    uint32 gid;
    uint64 spare[2];
    uint32 blocks;
    int32 db[12];
    int32 ib[5];
} di_d32;

Dirents

Each inode with a the mode.dir bit set (mode |= 0x4000) points to block(s) of dirents. Dirents contain the name and type of files, directories, symlinks, etc. Each directory will have an associated dirent block containing at least the '.' and '..' special files, along with all other files and sub-directories in that directory. Dirents are 8-byte aligned. The entsize value will say the total length of this dirent. There is typically padding after name which can just be skipped.

If the type of the dirent is 3, it is a directory. Its ino value indicates the inode number (0 being the first inode). That inode will point to the dirent block for that directory so you can continue down the file system tree.

If the type of the dirent is 2, it is a file. Its inode will point you to the location(s) of the file data.

Offset	Value	Size	Notes
0x00	ino	0x4	Inode index
0x04	type	0x4	Type of entry. 2=file, 3=directory, 4= . (link to current dir) , 5= .. (link to parent)
0x08	namelen	0x4	Length of filename (add 1 for 0-terminator)
0x0C	entsize	0x4	Size of this whole struct, in bytes
0x10	name	namelen + 1	Filename and 0-terminator
0x11 + namelen	padding	variable	Padding so this structure is exactly entsize bytes.

typedef struct {
    int32 ino;
    int32 type;
    int32 namelen;
    int32 entsize;
    char name[namelen+1];
} dirent;

Finding the root

The filesystem tree starts with the superroot, a sort of meta-directory that contains the root directory within it, along with something called a "flat_path_table". The superroot's inode is typically the first (zeroeth) inode entry in the table, but you should check PFS_HDR.superroot_ino for the actual index. The true root of the filesystem is the "uroot" directory within the super root.

flat_path_table

The flat_path_table is a file located above the root directory on every PFS image. It is simply a mapping of filename hashes to inode number, to increase the lookup speed for files:

typedef struct {
    uint32 filename_hash;
    uint32 inode;
} path_table_entry;

The hashes are sorted in ascending order in the file. The hash function is given below:

uint32_t fptbl_hash(const char* filename){
  int i;
  uint32_t hash = 0;
  for(i = 0; filename[i]; i++) {
    // convert character to uppercase
    char c = (filename[i] >= 'a' && filename[i] <= 'z') ? (filename[i] - 32) : filename[i];
    hash = c + 31 * hash;
  }
  return hash;
}

Patent explaining the flat path table

Tools

• GameArchives/ArchiveExplorer by maxton C# library/tool that supports opening and extracting from PFS images
• MakePFS by maxton C# tool for creating PFS images