SAA-001: Difference between revisions

From PS4 Developer wiki
Jump to navigation Jump to search
mNo edit summary
Line 42: Line 42:
* APU to BD-ROM is SATA I (1.5 Gbit/s)
* APU to BD-ROM is SATA I (1.5 Gbit/s)
* DDR3 bootup speed is 400MHz (DDR3-800, that's very low because DDR chip is rated for DDR3-1600). Not sure if DDR3 would go higher on fully booted unit).
* DDR3 bootup speed is 400MHz (DDR3-800, that's very low because DDR chip is rated for DDR3-1600). Not sure if DDR3 would go higher on fully booted unit).
* unit denies to boot if I cut some of PCI-e lanes. Normally, x4 PCI-e interface would work on x1 lane w/o problems (with lower bandwidth), but PS4 flashes blue forever if I cut PCI-e down to 1 lane.


{{Components}}
{{Components}}
<noinclude>[[Category:Main]]</noinclude>
<noinclude>[[Category:Main]]</noinclude>

Revision as of 18:59, 3 January 2014

SKU differentiation

productcode: 1-889-352-11 or 1-889-352-21

Gallery


Notes on Components

<SoC> Some extra info:

  • APU to MC link is indeed PCI-e Gen2 (5Gbit/s, 4 lanes)
  • APU to BD-ROM is SATA I (1.5 Gbit/s)
  • DDR3 bootup speed is 400MHz (DDR3-800, that's very low because DDR chip is rated for DDR3-1600). Not sure if DDR3 would go higher on fully booted unit).
  • unit denies to boot if I cut some of PCI-e lanes. Normally, x4 PCI-e interface would work on x1 lane w/o problems (with lower bandwidth), but PS4 flashes blue forever if I cut PCI-e down to 1 lane.