SAA-001: Difference between revisions
mNo edit summary |
|||
| Line 2: | Line 2: | ||
== SKU differentiation == | == SKU differentiation == | ||
* [[CUH- | * [[CUH-10xxA series]] contains [[SAA-001]] board | ||
productcode: 1-889-352-11 or 1-889-352-21 | productcode: [[1-889-352-11]] or [[1-889-352-21]] | ||
=== Gallery === | === Gallery === | ||
Revision as of 11:23, 19 January 2014
| This article is marked for rewrite/restructuring in proper wiki format. You can help PS4 Developer wiki by editing it. |
SKU differentiation
- CUH-10xxA series contains SAA-001 board
productcode: 1-889-352-11 or 1-889-352-21
Gallery
SAA-001 - backside
SAA-001 - componentside
SAA-001 - componentside
SAA-001 - backside
PS4 Motherboard SAA-001 - main component side
PS4 Motherboard SAA-001 - back side
SAA-001 componentside - wm
SAA-001 backside - wm
SAA-001 componentside - image2984
SAA-001 componentside - image2984
SAA-001 componentside - image2984
SAA-001 componentside - image2984
SAA-001 componentside - image2984
SAA-001 componentside - image2984
SAA-001 componentside - image2990
SAA-001 componentside - image2991
- SAA-001 - Backside - IMG 2992.JPG
SAA-001 backside - image2992
SAA-001 backside - image2993
SAA-001 backside - image2994
SAA-001 backside - image2995
SAA-001 backside - image2996
SAA-001 backside - image2997
SAA-001 backside - image2998
Notes on Components
<SoC> Some extra info:
- APU to MC link is indeed PCI-e Gen2 (5Gbit/s, 4 lanes)
- APU to BD-ROM is SATA I (1.5 Gbit/s)
- DDR3 bootup speed is 400MHz (DDR3-800, that's very low because DDR chip is rated for DDR3-1600). Not sure if DDR3 would go higher on fully booted unit).
- unit denies to boot if I cut some of PCI-e lanes. Normally, x4 PCI-e interface would work on x1 lane w/o problems (with lower bandwidth), but PS4 flashes blue forever if I cut PCI-e down to 1 lane.
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
