Editing SPIway

== SPIway ==
SPIway - Teensy++ 2.0 SPI flasher for PS4

Source: https://github.com/hjudges/NORway

=== Pinout ===
<div style="float:right">[[File:MX25L1006E Pinout.png|200px|thumb|left|Macronix [[MX25L1006E]] Pinout]]<br />[[File:25X10CLYA1 Pinout.png|200px|thumb|left|Macronix [[25X10CLYA1]] Pinout]]<br />[[File:25Q80BV Pinout.png|200px|thumb|left|Winbond [[25Q80BV]] Pinout]]<br />[[File:MX25L25635FMI-10G Pinout.png|200px|thumb|left|Macronix [[MX25L25635FMI-10G]] Pinout]]<br />[[File:SPIway-020.jpg|200px|thumb|left|Teensy 2.0++ SPIway Pinout]]</div>
{| border="1" cellspacing="0" cellpadding="5" border="#999" class="wikitable" style="border:1px solid #999; border-collapse: collapse;" 
|- bgcolor="#cccccc"
! 8-Pin !! 16-pin !! Usage !! Teensy++ 2.0<br />SPIway || Description
|-
| - || 1 || SIO3 || B5 || 8pin: Not Available - not used / 16pin: Serial Data Input & Output (for 4xI/O read mode)
|-
| 8 || 2 || VCC || +5V pad || +3V DC Power Supply
|-
| 7 || 3 || HOLD#/RESET# || B6 || 8pin: Hold, to pause the device without deselecting the device / 16pin: Hardware Reset Pin Active low
|-
| - || 4 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection 
|-
| - || 5 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection 
|-
| - || 6 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection 
|-
| 1 || 7 || CS# || B0 || Chip Select
|-
| 2 || 8 || SO/SIO1 || B3 || Serial Data Output (for 1 x I/O) or Serial Data Input & Output (for 2x I/O or 4x I/O read mode)
|-
| 3 || 9 || WP#/SIO2 || B4 || Write Protection: connect to GND or Serial Data Input & Output (for 4x I/O read mode)
|-
| 4 || 10 || GND || GND || Ground
|-
| - || 11 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection 
|-
| - || 12 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection 
|-
| - || 13 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection 
|-
| - || 14 || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | NC || style="color:white; background-color:darkgrey;" | No Connection 
|-
| 5 || 15 || SI/SIO0 || B2 || Serial Data Input (for 1 x I/O) or Serial Data Input & Output (for 2x I/O or 4x I/O read mode)
|-
| 6 || 16 || SCLK || B1 || Clock Input
|-
|}

Use short wires, esp. if you are not adding the 0.1{{micro}}F capacitor between ground and vcc as close as possible to the chip

=== Changelog ===
* v0.10
** Initial release
** Support for Macronix [[MX25L25635F]]
* v0.20
** Added README
** Added support for Macronix [[MX25L1006E]]
** Added support for Winbond [[W25X10CL]]
* v0.30
** Added support for Winbond [[W25Q80BV]] (thx to "Socketz"!)


{{Hardware Modification}}
<noinclude>[[Category:Main]]</noinclude>