Template:Syscon pinout BGA 200 pads

Mullion syscons, bottom view
With pad A1 mark at south-east corner

Mullion syscon, top view
With pad A1 mark at south-west corner

[ View ], [ Discuss ] or [ Edit ]

Syscon pinout BGA 200 pads

[ View ], [ Discuss ] or [ Edit ]

Pad	Port	Name	Type	Description
A1	NC	NC	?	Not connected
A2	J	DISC_IN	?	Connected to BluRay Drive connector (CN3221) pin 52
A3	J	SW_0	?	Connected to Fujitsu MB39A116PFT (IC6003) pin 9 (switches +5V_MISC) Connected to Fujitsu MB39A116PFT (IC6003) pin 10 (switches +3.3V_MISC) Connected to Texas Instruments SN105233DBTR (IC6301) pin 10 (switches +1.7_MISC)
A4	J	SW_8_C	?	Connected to Texas Instruments SN105233DBTR (IC6301) pin 9 (switches +1.8V_RSX_FBVDDQ) Connected to OnSemi NCP511SN18T1 (IC6008) pin 3 (switches +1.8V_RSX_PLL_VDD)
A5	J	DISC_OUT12_SW	?	Connected to BluRay Drive connector (CN3221) pin 58
A6	R	MC_RESERVED2	?	Not connected to BluRay Drive because a missing resistor (R4080). BD_LED
A7	R	MC_ALIVE	?	Connected to BluRay Drive connector (CN3221) pin 47
A8	K	SB_SPI_CLK	?	Southbridge SPI Bus
A9	K	SB_SPI_DI	?	Southbridge SPI Bus
A10	K	DVE_I2C_SCL	?	Connected to Digital Video Encoder CXM4024R pin 35
A11	K	ACDC_STBY	?	Connected to Power Supply (small connector). This signal enables +12V_MAIN power rail (big prongs)
A12	E	EJECT_SW	?	Connected to Switch board CSW-001 connector pin 5
A13	E	SB_EBUS_RESET	?	SS2_RESET (StarShip2 related), not connected because a missing resistor (R4135) ?
A14	E	PE3	?
A15	E	BE_POW_FAIL	?	Connected to OnSemi NCP5318FTR2G (IC6103) pin 7
A16	NC	NC	?	Not connected
B1	PWR	AVREF1	?	+3.3V_EVER
B2	J	DISC_OUT8_SW	?	Connected to BluRay Drive connector (CN3221) pin 57
B3	J	PJ3	?	Not connected in retail PS3 models (testpad CL4089)
B4	J	SW_8_B	?	Connected to Mitsumi MM1561JFBE (IC2408) pin 5 (switches +1.8V_ANA) Connected to Mitsumi MM1593DFBEG (IC2407) pin 5 (switches +3.3V_ANA) Connected to transistor DTC144EUA-T106 (Q2401) base pin (switches +5V_ANA ?) Connected to OnSemi NCP511SN15T1G (IC6019) pin 3 (switches +1.5V_AVCG_VDDIO) Connected to Rohm BD3521FVM-TR (IC6017) pin 3 (switches +1.5V_RSX_VDDIO)
B5	J	DVE_RST	?	Connected to Digital Video Encoder CXM4024R pin 31 ?
B6	R	MC_P_OFF_REQ	?	Connected to BluRay Drive connector (CN3221) pin 48
B7	R	MC_RESERVED1	?	Connected to BluRay Drive connector (CN3221) pin 49
B8	K	SB_SPI_DO	?	Southbridge SPI Bus
B9	K	SB_SPI_CS	?	Southbridge SPI Bus
B10	K	DVE_I2C_SDA	?	Connected to Digital Video Encoder CXM4024R pin 36
B11	K	PK0	?
B12	E	POW_SW	?	Connected to Switch board CSW-001 connector pin 4
B13	E	SB_EBUS_BRDY	?	SS2_BRDY (StarShip2 related)
B14	E	VD_CECI1	?
B15	E	POW_FAIL	?	Connected to Mitsumi PST3642UL (IC6023) pin 4. Used to monitor the state of +12V_MAIN power rail
B16	CLK	OSCOUT	?	Connected to crystal 32.768Khz
C1	O	MK_I2C_SDA	?	Connected to ICS1493G-18LFT clock generator (IC5001) pin 47
C2	PWR	AVREF2	?	Ground
C15	PWR	VSSep	?	EEPROM Ground
C16	CLK	OSCIN	?	Connected to crystal 32.768Khz
D1	O	MK_I2C_SCL	?	Connected to ICS1493G-18LFT clock generator (IC5001) pin 46
D2	PWR	VDD2	?	+1.5V_RSX_VDDIO
D4	O	XDR_FET_RST	?	XDR_RQ_RST
D5	O	XCG_EN	?	Connected to ICS9218AGLFT (IC5002) pin 11 (switches BE_Y0_RQ_CTM/N, BE_Y1_RQ_CTM/N) Connected to ICS9218AGLFT (IC5003) pin 11 (switches BE_PLL_REFCLK_P/N) Connected to ICS9214DGLFT (IC5004) pin 11 (switches BE_RC_REFCLK_P/N, RSX_RC_REFCLK_P/N, SB_RC_REFCLK_P/N)
D6	H	VD_CECI0	?
D7	H	RSX_POW_FAIL	?	Connected to OnSemi NCP5318FTR2G (IC6201) pin 7
D8	H	MUL_TRG_IN	?	Connected to missing components (IC4003, IC4004, IC4005) pin 3 and 6 (related with BE_TRG_IN/OUT, RSX_TRG_IN/OUT, SB_TRG_IN/OUT)
D9	H	SB_INT	?
D10	F	MUL_TRG_OUT	?	Connected to missing components (IC4006) pin 2 (related with BE_TRG_IN/OUT, RSX_TRG_IN/OUT, SB_TRG_IN/OUT)
D11	F	SB_RESET	?	Connected to 88SA8040-TBC1 SATA2PATA BluRay controller pin 17 Connected to GL852 (IC3305) USB HUB pin 38 Connected to Multi-card-board connector CN3219 pin 7
D12	F	PF2 BE_VCS_1.25_ON	?	COK-001/COK-002 PF2 (Not connected) SEM-001 BE_VCS_1.25_ON
D13	F	SW_1_A	?	Connected to Mitsumi MM1593DFBEG (IC6020) pin 5 (switches +3.3V_MK_VDD) for Clock Synthesizer
D15	CLK	32KIN	?	Connected to resistor 22ohm to pad D16
D16	CLK	32KOUT	?	Connected to resistor 1K to +3.3V_EVER
E1	PWR	VSS	?	Ground
E2	N	RSX_SPI_CS		Connected to RSX pad AW8 (RSX SPI Bus)
E4	O	EJECT_MECHA	?	Connected to BluRay Drive connector (CN3221) pin 56
E5	O	PO0	?	Not connected (testpad CL4086)
E6	H	HDMI_INT	?	Connected to TC7WP3125FK (IC2501) pin 6. This is a syscon input at 3.3V The TC7WP3125FK converts the signal originally triggered by Sil9132CBU pad E10 ? at 1.5V and converts it to 3.3V for syscon The TC7WP3125FK also converts the signal RS_SPDO0 (at 1.5V) into RS_SPDO0_33 (at 3.3V)
E7	H	MECHA_INT	?	Not connected in retail PS3 models (testpad CL4102). The related SouthBridge pad is tied to GND with a 10k resistor (R3163)
E8	H	MUL_CHKSTP_IN	?	SB_CHKSTP_OUT
E9	H	SYS_THR_ALRT	?	Connected to CELL 90nm pad AP23
E10	F	MUL_CHKSTP_OUT	?
E11	F	SB_CGRESET	?	SB_CGRST (the name indicates that it resets the clock generator for the southbridge)
E12	F	BT_WAKEON	?	Connected to wifi board connector (CN3701) pin 30 (named BT_WAKE). This is a syscon input
E13	F	PF1 BE_VCS_1.30_ON	?	COK-001/COK-002 PF1 (Not connected) SEM-001 BE_VCS_1.30_ON
E15	EEP	PP3	?
E16	EEP	SKB	?
F1	N	RSX_SPI_DI		Connected to RSX pad BA7 (RSX SPI Bus)
F2	N	RSX_SPI_DO		Connected to RSX pad BA6 (RSX SPI Bus)
F4	O	HDMI_RST0	?	Connected to HDMI controller Sil9132CBU pad G2 ?
F5	O	DISC_IN_MECHA	?	Connected to BluRay Drive connector (CN3221) pin 55
F6	PWR	VDD3	?	+3.3V_EVER
F7	PWR	AVDD	?	+3.3V_EVER
F8	PWR	VDD3	?	+3.3V_EVER
F9	NC	NC	?	Not connected
F10	PWR	VDD3	?	+3.3V_EVER
F11	PWR	VDDbat	?	+battery
F12	D	MK_EN	?	Connected to ICS1493G-18LFT clock generator (IC5001) pin 16
F13	D	SW_5_B	?	Connected to Rohm BD3520FVM-TR (IC6200) pin 3 (switches +1.2V_RSX_VDDR)
F15	EEP	PP0	?
F16	EEP	CSB	?
G1	N	RSX_SPI_CLK		Connected to RSX pad AY8 (RSX SPI Bus)
G2	N	RSX_RESET		Connected to RSX pads AW5 (RESET) and AV6 (CGRESET)
G4	O	HDMI_RST1	?	Not connected ? (it seems to be a secondary reset signal for HDMI controller Sil9132CBU never used in retail PS3 models)
G5	O	SW_AVCG PO5	?	Connected to ICS422AG-07LFT (IC2102) pin 12 (switches RSX_AVCLK0, RSX_AVCLK1, RSX_AVCLK2, RSX_AVCLK3) clocks for RSX and indirectly for EEGS<->RDRAM
G6	PWR	AVSS	?	Ground
G7	PWR	VSS	?	Ground
G8	PWR	VSS	?	Ground
G9	NC	NC	?	Not connected
G10	PWR	VSS	?	Ground
G11	PWR	VDDep	?	EEPROM Power (+3.3V_EVER)
G12	D	BEVRM_VID4	?	Connected to OnSemi NCP5318FTR2G (IC6103) pin 3
G13	D	BEVRM_VID5	?	Connected to OnSemi NCP5318FTR2G (IC6103) pin 30
G15	EEP	PP2	?
G16	EEP	DI	?
H1	N	PN5	?
H2	N	PN6	?
H4	L	PL2	?	Not Connected
H5	L	PL1	?	Not Connected
H6	L	PL0	?	Not Connected
H7	PWR	DVDD	?	+1.8V_EVER
H10	PWR	VDD3	?	+3.3V_EVER
H11	CLK	TESTMODE	?
H12	D	BEVRM_VID2	?	Connected to OnSemi NCP5318FTR2G (IC6103) pin 1
H13	D	BEVRM_VID3	?	Connected to OnSemi NCP5318FTR2G (IC6103) pin 2
H15	EEP	PP1	?
H16	EEP	DO	?
J1	N	RSX_FLDO1		Connected to RSX pad AM40
J2	N	RSX_INT		Connected to RSX pad AY7
J4	L	PL4	?	Not Connected
J5	L	PL3	?	Not Connected
J6	PWR	VDD3	?	+3.3V_EVER
J7	PWR	DVDD	?	+1.8V_EVER
J10	PWR	DVDD	?	+1.8V_EVER
J11	CLK	RST	?	Connected to service connector (CN4009) pin 8
J12	D	BEVRM_VID0	?	Connected to OnSemi NCP5318FTR2G (IC6103) pin 31
J13	D	BEVRM_VID1	?	Connected to OnSemi NCP5318FTR2G (IC6103) pin 32
J15	EEP	WCB	?
J16	EEP	RBB	?
K1	N	VD_VINT0	?
K2	N	VD_VINT1	?
K4	L	PL6	?	Not Connected
K5	L	PL5	?	Not Connected
K6	PWR	VSSF	?	Ground
K7	JTAG	JTDI	?	Connected to service connector (CN4009) pin 3
K8	JTAG	JTCK	?	Connected to service connector (CN4009) pin 5
K9	JTAG	JTDO	?	Connected to service connector (CN4009) pin 6
K10	PWR	DVDD	?	+1.8V_EVER
K11	PWR	VSSF	?	Ground
K12	C	I2CBUS_EN	?	Connected to Toshiba TC7WB66FK pins 3 and 7 (IC5005 on SEM-001) through 1K resistor (in COK-001 the resistor is missing, a.k.a. this syscon line is N/C). This chip "duplicates" the MK_I2C_SCL/MK_I2C_SDA bus into a secondary XCG_I2C_SCL/XCG_I2C_SDA bus for the clock reference chip/s
K13	C	PC7	?	Not connected in retail PS3 models (testpad CL4085)
K15	EEP	PI6	?
K16	EEP	PI7	?
L1	PWR	VSS	?	Ground
L2	PWR	VDD0	?	+1.2V_MC2_VDDIO
L4	L	PL8	?	Not Connected
L5	L	PL7	?	Not Connected
L6	PWR	VDDF	?	+3.3V_EVER
L7	JTAG	JNTRST	?	Connected to service connector (CN4009) pin 2 ?
L8	JTAG	JRTCK	?	Connected to service connector (CN4009) pin 4
L9	JTAG	JTMS	?	Connected to service connector (CN4009) pin 7
L10	PWR	DVDD	?	+1.8V_EVER
L11	PWR	DVDD	?	+1.8V_EVER
L12	C	RSXVRM_VID4	?	Connected to OnSemi NCP5318FTR2G (IC6201) pin 3
L13	C	RSXVRM_VID5	?	Connected to OnSemi NCP5318FTR2G (IC6201) pin 30
L15	I	DISC_CHUCK	?	Connected to BluRay Drive connector (CN3221) pin 54
L16	I	SW_PCI	?	Connected to Mitsumi MM1591FFBEG (IC6021) pin 5 (switches +1.5V_BRIDGE) for the PS2 bridge CXD9208GP Connected to Mitsumi MM1593DFBEG (IC6022) pin 5 (switches +3.3V_BRIDGE) for the PS2 bridge CXD9208GP Connected to PCI service connector pin 80
M1	M	BE_SPI_DI	?	Connected to CELL 90nm pad AR13 (SPI Bus)
M2	M	BE_SPI_CS	?	Connected to CELL 90nm pad AP13 (SPI Bus)
M4	A	PA0	?	Not connected in retail PS3 models (testpad CL4092)
M5	A	WLAN_RESET	?	Connected to wifi board connector (CN3701) pin 29 (named 11G_RESET). This is a syscon output
M6	A	PA4	?	Not connected in retail PS3 models (testpad CL4087)
M7	A	POW_LED	?	Connected to Switch board CSW-001 connector pin 6
M8	G	FANPWM1	?	Secondary fan output (non-retail PS3 models only)
M9	G	BUZZER	?
M10	G	XDR_FET_VREF	?	Connected to transistor DTC144EUA-T106 (Q4008). Switches XDR_RQ_VREF_FET
M11	G	SW_ATA	?	Connected to UMH2NTN dual transistor (Q6009) pin 2 (switches +12V_BD) Connected to UMH2NTN dual transistor (Q6009) pin 5 (switches +5V_BD) Connected to UMH2NTN dual transistor (Q6006) pin 2 (switches +5V_HDD)
M12	C	RSXVRM_VID2	?	Connected to OnSemi NCP5318FTR2G (IC6201) pin 1
M13	C	RSXVRM_VID3	?	Connected to OnSemi NCP5318FTR2G (IC6201) pin 2
M15	I	SW_2	?	Connected to Texas Instruments TPS51117PWRG4 (IC6302) pin 1 (switches +1.8V_VDD_MEM)
M16	I	DISC_PHOT_LED	?	Connected to BluRay Drive connector (CN3221) pin 53
N1	M	BE_SPI_CLK	?	Connected to CELL 90nm pad AY13 (SPI Bus)
N2	M	BE_SPI_DO	?	Connected to CELL 90nm pad AV13 (SPI Bus)
N4	A	SW_5_A	?	Connected to OnSemi NCP5318FTR2G (IC6201) pin 29 Connected to Toshiba TC7SG08FU (IC6204) pin 1 Switches +1.2V_RSX_VDDC
N5	A	BT_RESET	?	Connected to wifi board connector (CN3701) pin 10 (named SYSCON_RST). This is a syscon output
N6	A	AUDIO_MUTE	?	Connected to transistor DTA144EUA-T106 (Q2404). Switches Cirrus CX4351-CZZR pin 18 (AOUTA) left audio channel and pin 15 (AOUTB) right audio channel, that are connected to MultiAV connector pin 11 (AUL) and pin9 (AUR) respectivelly
N7	A	STBY_LED	?	Connected to Switch board CSW-001 connector pin 7
N8	G	FANPWM0	?	Primary fan output (all PS3 models)
N9	G	SW_PWM	?	Connected to Switch board CSW-001 connector pin 2
N10	G	XDR_FET_SCK	?	BE_RQ_SCK_BJT
N11	G	SW_4_A	?	Connected to wifi board connector (CN3701) pin 9 (named 11G_PWR_EN). This is a syscon output Connected to base pin of transistor UMH2NTN (Q3501) who switches IC3502 pin 5, and IC3501 pin 3 (+1.2V_ESW, +1.9V_ESW, +3.3V_ESW for Ethernet Controller)
N12	C	RSXVRM_VID0	?	Connected to OnSemi NCP5318FTR2G (IC6201) pin 31
N13	C	RSXVRM_VID1	?	Connected to OnSemi NCP5318FTR2G (IC6201) pin 32
N15	I	BACKUP_MODE	?	Connected to service connector (CN4009) pin 14
N16	I	DIAG_MODE	?	Connected to service connector (CN4009) pin 13
P1	M	BE_POWGOOD	?	Connected to CELL 90nm pad AV20
P2	M	BE_RESET	?	Connected to CELL 90nm pad AW20
P15	P	UART0_RxD	?	Connected to service connector (CN4009) pin 10 (Serial Receive)
P16	P	UART0_TxD	?	Connected to service connector (CN4009) pin 11 (Serial Transmit)
R1	M	PM7	?
R2	M	PM6	?
R3	PWR	VDD1	?	+1.2V_MC2_VDDIO
R4	PWR	AVSUO	?	Ground
R5	PWR	AVDUO	?	+3.3V_EVER
R6	PWR	VSS	?	Ground
R7	PWR	DVDD	?	+1.8V_EVER
R8	Q	RSX_FBVDD_SEL	?	Connected to Texas Instruments SN105233DBTR (IC6301) through transistor/s
R9	Q	PQ1	?
R10	Q	RMC_IN	?	Connected to Switch board CSW-001 connector pin 3 Connected to service connector (CN4009) pin 17
R11	B	VD_CECO0	?
R12	B	SW_3	?	Connected to Rohm BD3520FVM-TR (IC6305) pin 3 (switches +1.2V_SB_VDDC and +1.2V_SB_VDDR)
R13	B	SW_1_B	?	Connected to Mitsumi MM1562ZFBE (IC6013) pin 5 (switches +2.5V_LREG_XCG_500_MEM) Connected to Toshiba TC7WB66FK (IC5005) pins 3 and 7, and to (IC5006) pin 4, through 1K resistor. The TC7WB66FK chip "duplicates" the MK_I2C_SCL/MK_I2C_SDA bus into a secondary XCG_I2C_SCL/XCG_I2C_SDA bus for the clock reference chip/s Analog Voltage for the core PLL of IC5004, Clock Generator used to support the Rambus XDR memory subsystem and Redwood logic interface.
R14	B	SW_7_A	?	Connected to OnSemi NCP5318FTR2G (IC6103) pin 29 Connected to Toshiba TC7SG08FU (IC6107) pin 1 Switches +1.0V_BE_VDDC Cell BE core voltage supply (VDD) then VCS (the core array voltage). Note, the VID values stored on the CELL itself are not available to be read yet. So the default VID of the VRM is used until then.
R15	P	HDMI_I2C_SDA	?	Connected to HDMI controller Sil9132CBU pad D2
R16	P	HDMI_I2C_SCL	?	Connected to HDMI controller Sil9132CBU pad E2
T1	NC	NC	?	Not connected
T2	M	BE_INT	?	Connected to CELL 90nm pad AW19
T3	PWR	VSS	?	Ground
T4	CLK	XTAL	?	Connected to crystal 16.9344Mhz
T5	CLK	EXTAL	?	Connected to crystal 16.9344Mhz
T6	PWR	VSS	?	Ground
T7	CLK	XXTALO	?	Not connected (testpad CL4040)
T8	Q	THR_I2C_SCL	?
T9	Q	THR_I2C_SDA	?
T10	Q	PQ4	?
T11	Q	PQ5	?
T12	B	VD_CECO1	?
T13	B	SW_4_B	?	Connected to 88E6108 ethernet controller (IC3503) pin 94 (signal named P3_ENABLE_PD) Connected to (Q6003) transistor (switches +3.3V_SB_VDDIO) Connected to OnSemi NCP511SN25T1G (IC6011) pin 3 (switches +2.5V_SB_PLL_VDDC) Connected to Mitsumi MM1591JFBEG (IC6014) pin 5 (switches +1.8V_SB_PERI) Connected to UMH2NTN dual transistor (Q6006) pin 5 (switches +5V_USB)
T14	B	SW_6	?	Connected to Rohm BD3520FVM-TR (IC6303) pin 3 (switches +1.2V_YC_RC_VDDIO) Connected to Mitsumi MM3141CNRE (IC6012) pin 3 (switches +1.2V_MC2_VDDIO) I/O voltage supplies, VDD_IO for CELL, RSX and South Bridge
T15	B	SW_8_A	?	Connected to Rohm BD3504FVM-TR (IC6304) pin 3 (switches +1.5V_YC_RC_VDDA) Connected to Texas Instruments TPS73101DBVRG4 (IC6007) pin 3 (switches +1.6V_BE_VDDA)
T16	NC	NC	?	Not connected