Revision as of 20:54, 11 June 2021

Todo

Need help getting data for the different SKU models and the default harddrive they are equiped with.

There is still some conflicting data to be sorted out, e.g.:

maximum size internal drive

The maximum size of the internal harddrive that the PS3 supports is 1TB (TeraBytes) 

note: this seems untrue as there are several people posting pictures of their external to internal drive mod with a size of 2TB

Using Normal Mode and Recovery - when trying to install a 1.5TB 3.5" drive as internal (using an eSATA cradle)

Using Recovery it is possible to finish the format of the harddrive until 100%. The system however fails to reboot automaticly after that and halts. When enforced to reboot, it errors out with "Wrong Harddrive".
When trying all the other Recovery Menu options it errors out with "Harddrive Error 0x8002F281".
When trying to boot to XMB it also errors out with "Harddrive Error 0x8002F281".
When replacing the drive for the previous tested 1TB harddrive, it boots without errors to XMB and reports : 827GB free/931GB total

Conclusion: >1TB didn't not work.

Using Factory Service Mode - when trying to install a 1.5TB 3.5" drive as internal (using an eSATA cradle) FSM

Second try, using Service Mode
first replacing drive for original 120GB 2.5" and using Factory Service Mode to downgrade to lowest firmware the system can handle (2K slim -> FW 2.70)
- Result is fine. Log showed no errors : UPDATER_LOG.TXT
Replaced for 1.5TB 3.5" drive and do exactly the same 2.70 again
- Result is fine. Log showed no errors : UPDATER_LOG.TXT
Boot to XMB with Service Mode still activated
- No problems to get into XMB, but checking System Settings > System Information shows size detection issues:

System Software  Version 2.70
IP Address       xxx.xxx.x.xxx
MAX Address      xx:xx:xx:xx:xx:xx
Free Space       30 G

Exit Factory Service Mode
- Blank screen freeze when trying to boot to XMB in normal mode
Power off and try again gives "system software was not installed correct" error
inserted USB with 2.70 on normal location and START+SELECT button to let it reinstall
- Preparing Update counts to 100% and then halts (does not reboot), just like in first trial.
Manual poweroff and reboot just results in blank screen with no harddrive activity

Conclusion: >1TB didn't not work in normal or recovery mode only with FSM enabled.

Going back to the 1TB and crosschecking

Replacing drive back to the working 1TB (has 3.55 on it) gives prompt to reinstall 2.70, doing so errors out with "Harddrive Error 0x8002F281".
Entering Factory Service Mode with 1TB and let it reinstall via lv2diag results fine without errors: UPDATER_LOG.TXT
Boot to XMB with Service Mode still activated
- No problems to get into XMB, but checking System Settings > System Information shows size detection issues (the '30 G' seems to be FSM related):

System Software  Version 2.70
IP Address       xxx.xxx.x.xxx
MAX Address      xx:xx:xx:xx:xx:xx
Free Space       30 G

Exit Factory Service Mode
No problems to get into XMB, and checking System Settings > System Information shows no size detection issues:

System Software  Version 2.70
IP Address       xxx.xxx.x.xxx
MAX Address      xx:xx:xx:xx:xx:xx
Free Space       827GB / 931GB

Conclusion: <=1TB works fine in all modi.

maximum size external drive

Maximum size is 2TB.

PS3 can only read drives using MBR (Master Boot Record) partition table. MBR maximum drive size is 2TB (with up to 4 partitions).

PS3 cannot read drives using GPT (GUID Partition Table). GPT has maximum drive size around 256TB, although in practice it may get tricky beyond 15 TB.

External HDD : You can format it to any size up to 8TB

note: this seems untrue, because when >2TB drives have hit the market, no screenshots of >2TB external storage are known

sources used: source: http://www.edepot.com/playstation3.html#PS3_Harddrive and euss temp blog
todo: flush out errors, merging in a readable format

Footnote: maximum supported drive space correlates to support of 512sector (either native, or emulated), see: http://en.wikipedia.org/wiki/Advanced_Format

Tests increasing the max HDD capacity supported by the firmware

Successful 2Tb installation confirmed personally. (warning: "restore filesystem" a.k.a. "filesystem check" was not tested. Without this function the hdd will cummulate filesystem errors up to a point where the PS3 will welcome you with a warning message telling "the hdd needs to be formatted" and you will lose all the contents of it)

HDD was Toshiba MQ01ABB200 and PS3 was CECHK04
Flashing to 4.46 OFW and reducing 2Tb hard drive to 3633537126 sectors via "hiding" rest via HPA on PC (formatted first to FAT format on MAC a whole device and GPT instead MBR) with HDAT2 so PS3 sees its as 1732.6GB Hard Drive and did succeed formatting.
After 4.46 you can upgrade to latest 4.82 Firmware back and continue using it. 4.82 firmware says after HPA sector hiding that it is "unsupported" but 4.46 doesn't and can format it.

Pictures of some of this of my personal confession and proof: [1] Original info i used to confirm: [2]

Note from another tester : While the above seems to work, using 4.46 to allow 1.75tb leads to errors after saving a few games : the console stalls, then takes forever to recover (if it recovers). I tried reducing to 1.5Tb, and none of the errors show up. What's misleading is that 1.5Tb is in fact recognized by 4.82+, even with HPA. I think the safe way to get the max capacity is to use HPA, but stick to something between 1.5Tb and 1.75Tb and make sure it's recognized by 4.82+. It means downgrading to 4.46 is not necessary (and mostly misleading).

AES-256-CBC versus AES-256-XTS

There is conflicting mention of sources for the algo/mode used for GameOS encryption.

Fact:

Sony/IBM loves AES
256bit based
sectorsize 512 bytes (4096 bits)
blockcipher
recurring patterns are seen

Reference:

PS3 HDD reader for windows by 3141card

May 2018, added PS3 FAT NOR support: http://www.psx-place.com/threads/restoring-my-corrupted-hdd.17932/page-2#post-125398

Fat(NAND), 1. layer(ata)    -> aes-cbc-192, ata_key1 IV = 0
           2. layer(vflash) no vflash
        
Fat(NOR),  1. layer(ata)    -> aes-cbc-192, ata_key1 IV = 0
           2. layer(vflash) -> aes-xts-128, encdec_key1 and encdec_key2, tweak = physical sector number on hdd
        
Slim(NOR), 1. layer(ata)    -> aes-xts-128, ata_key1 and ata_key2
           2. layer(vflash) -> aes-xts-128, encdec_key1 and encdec_key2, tweak = physical sector number on hdd

Experimental Tables

HDD partitions

PS3 Hard Disk Drive, partitions and storage regions
Storage Region						Access Control List			File System				Size					Usage
OtherOS					GameOS	Secure Profile		Unk	Encryption			Type	Official				Unnofficial	Official	Unnofficial
						Name	auth_id		FAT		SLIM		Decimal		Hexadecimal
						Name	auth_id		NAND	NOR	NOR		Bytes	Sectors	Bytes	Sectors
ps3d (3)
	ps3da (3.0)												4 KB	8	0x1000	0x8	Same	HDD Partition Table (Physical HDD Device)
		ps3vflash (3.1)			?	SCE_CELLOS_PME PS3_LPAR	1070000001000001 1070000002000001	0B 03	↑:No ↓:No	↑:AES-CBC-192 (ata_key1, IV=0) ↓:AES-XTS-128 (encdec_key1, encdec_key2)	↑:AES-XTS-128 (ata_key1, ata_key2) ↓:AES-XTS-128 (encdec_key1, encdec_key2)	Raw access	256 MB	524.288	0x10000000	0x80000	Any	First region of HDD, contains VFLASH. (only NOR)
			ps3vflasha (3.1(1.0))										4 KB	8	0x1000	0x8	Same	VFLASH Partition Table (Virtual FLASH Device, only NOR)
				ps3vflashb (3.1(1.1))	?	SCE_CELLOS_PME	1070000001000001	03	↑:No ↓:No	↑:AES-CBC-192 (ata_key1, IV=0) ↓:AES-XTS-128 (encdec_key1, encdec_key2)	↑:AES-XTS-128 (ata_key1, ata_key2) ↓:AES-XTS-128 (encdec_key1, encdec_key2)	Raw access ?	14,75 MB	30.200	0xEBF000	0x75F8	Same	"mirror" of real NOR second region: "ps3nflashb" ?
													256 KB	512	0x40000	0x200	Same	?
				ps3vflashc (3.1(1.2))	CELL_FS_IOS:BUILTIN_FLSH1 dev_flash	PS3_LPAR SCE_CELLOS_PME PS2_*LPAR	1070000002000001 1070000001000001 1020000003000001	03 03 01	↑:No ↓:No	↑:AES-CBC-192 (ata_key1, IV=0) ↓:AES-XTS-128 (encdec_key1, encdec_key2)	↑:AES-XTS-128 (ata_key1, ata_key2) ↓:AES-XTS-128 (encdec_key1, encdec_key2)	FAT16	199,75 MB	409.088	0xC7C0000	0x63E00	Same	Firmware files
				ps3vflashd (3.1(1.3))	CELL_FS_IOS:BUILTIN_FLSH2 dev_flash2	PS3_LPAR SCE_CELLOS_PME	1070000002000001 1070000001000001	03 03	↑:No ↓:No	↑:AES-CBC-192 (ata_key1, IV=0) ↓:AES-XTS-128 (encdec_key1, encdec_key2)	↑:AES-XTS-128 (ata_key1, ata_key2) ↓:AES-XTS-128 (encdec_key1, encdec_key2)	FAT16	16 MB	32.768	0x1000000	0x8000	Same	XRegistry (Console/User settings)
				ps3vflashe (3.1(1.4))	CELL_FS_IOS:BUILTIN_FLSH3 dev_flash3	PS3_LPAR SCE_CELLOS_PME	1070000002000001 1070000001000001	03 03	↑:No ↓:No	↑:AES-CBC-192 (ata_key1, IV=0) ↓:AES-XTS-128 (encdec_key1, encdec_key2)	↑:AES-XTS-128 (ata_key1, ata_key2) ↓:AES-XTS-128 (encdec_key1, encdec_key2)	FAT12	512 KB	1.024	0x80000	0x400	Same	CRL/DRL (Bluray revocation lists)
				ps3vflashf (3.1(1.5))	CELL_FS_IOS:BUILTIN_FLSH4 dev_flash4 ?	PS3_LPAR SCE_CELLOS_PME LINUX_LPAR	1070000002000001 1070000001000001 1080000004000001	03 03 03	↑:No ↓:No	↑:AES-CBC-192 (ata_key1, IV=0) ↓:AES-XTS-128 (encdec_key1, encdec_key2)	↑:AES-XTS-128 (ata_key1, ata_key2) ↓:AES-XTS-128 (encdec_key1, encdec_key2)	Raw access	4 MB	8.192	0x400000	0x2000	Any	cell_ext_os_area + OtherOS bootloader (compressed: otheros.bld)	cell_ext_os_area + OtherOS++ bootloader (uncompressed: dtbImage.ps3.bin)
													4,25 MB	8.704	0x440000	0x2200	Same	?
				ps3vflashg (3.1(1.6))	?	SCE_CELLOS_PME	1070000001000001	03	↑:No ↓:No	↑:AES-CBC-192 (ata_key1, IV=0) ↓:AES-XTS-128 (encdec_key1, encdec_key2)	↑:AES-XTS-128 (ata_key1, ata_key2) ↓:AES-XTS-128 (encdec_key1, encdec_key2)	Raw access ?	256 KB	512	0x40000	0x200	Same	?
													16,25 MB	33.280	0x1040000	0x8200	No ?	Padding
				ps3vflashh (3.1(1.7))	?	No	No	No	↑:No ↓:No	↑:AES-CBC-192 (ata_key1, IV=0) ↓:AES-XTS-128 (encdec_key1, encdec_key2)	↑:AES-XTS-128 (ata_key1, ata_key2) ↓:AES-XTS-128 (encdec_key1, encdec_key2)	All supported by linux	16,25 MB	33.280	0x1040000	0x8200	Any	Not used	Linux/FreeBSD for NOR PS3's Based on graf drivers (deprecated)
													8 KB	16	0x2000	0x10	Same ?	Padding ?
		ps3db (3.2)			CELL_FS_UTILITY:HDD0 dev_hdd0	SCE_CELLOS_PME PS3_LPAR PS2_*LPAR	1070000001000001 1070000002000001 1020000003000001	03 03 03	AES-CBC-192 (ata_key1, IV=0)		AES-XTS-128 (ata_key1, ata_key2)	UFS2	Any					GameOS
													4 KB	8	0x1000	0x8	Same ?	Padding
		ps3dc (3.3)			CELL_FS_UTILITY:HDD1 dev_hdd1	SCE_CELLOS_PME PS3_LPAR	1070000001000001 1070000002000001	03 03	AES-CBC-192 (ata_key1, IV=0)		AES-XTS-128 (ata_key1, ata_key2)	FAT16	2 GB	4.194.296	0x7FFFF000	0x3FFFF8	Same	GameOS Cache
													4 KB	8	0x1000	0x8	Same ?	Padding
		ps3dd (3.4)			CELL_FS_UTILITY:HDD2 dev_hdd2 ?	PS3_LPAR SCE_CELLOS_PME LINUX_LPAR	1070000002000001 1070000001000001 1080000004000001	03 03 03	AES-CBC-192 (ata_key1, IV=0)		AES-XTS-128 (ata_key1, ata_key2)	All supported by linux	10GB (0x13FFFF8 sectors) All available - 10GB (All - 0x13FFFF8 sectors)				Any	OtherOS (disabled in firmware 3.21)	Linux/FreeBSD for NAND/NOR PS3's Based on glevand drivers
													4 KB	8	0x1000	0x8	Same ?	Padding

HDD partitions table info

This table (pretends to) show all the posible partition layouts in all PS3 models, even when there are 2 big differences that changes partition positions (and consequently region names in Otheros/linux)
- Flash type
  - NAND flash 256mb - All firmware is stored in real NAND flash
  - NOR flash 16mb - A small part of the firmware is stored in real NOR flash, and most of the firmware is stored in the first "virtual flash" (ps3vflash) partition in HDD (his position makes the other partitions to be displaced)
- OtherOS bootloader installation (usually petitboot or kboot)
  - OtherOS bootloader official - petitboot is installed in region (1.5), his size is smaller than the region so no need to resize
  - OtherOS++ bootloader unofficial - petitboot is installed in region (1.5), his size is bigger than the region so the region is resized conveniently (usually up to 8MB = 16384 sectors)
- OtherOS installation
  - OtherOS official for NAND models - Linux/FreeBSD installed at region (3.4), last region of the HDD
  - OtherOS++ unofficial for NOR models - Linux/FreeBSD installed at region (1.7), last region of vflash is created and resized conveniently (firmware installers doesnt creates this region)
  - OtherOS/OtherOS++ unofficial for NOR/NAND models - Linux/FreeBSD installed at region (3.4), last region of the HDD

Devices contains a single physical partition
Physical partitions contains one or more logicall partitions

Padding Notes:
- 7th region of vflash (ps3vflashg) ends at sector 0x77E00. vflash is 0x80000 sectors size, so the "not used area" after ps3vflashg has a size of: 0x80000 - 0x77E00 = 0x8200 sectors = 17039360 bytes (16,25 MB)
- The official padding between HDD regions defined in "HDD Partition Table" seems to be 0x8 sectors size (see graf notes and the example below) but the padding can be different when using unnofficial rebuild methods (create_hdd_region.sh adds a padding of 0x8 sectors before and another 0x8 sectors after the new region, concatenating new regions with this script generates double padding). Or when modifying the "HDD Partition Table" manually is posible to remove all padding then let the system generate the new region by himself
- VFLASH displacement
  - NAND: ps3db region starts at sector 0x18 (displaced 0x8 sectors by "HDD partition table" + 0x10 by ?)
  - NOR: ps3db region starts at sector 0x80018 (displaced 0x8 sectors by "HDD partition table" + 0x80000 by VFLASH + 0x10 by ?)

Sector backup/restore tips
- There are some specific sectors that contains criticall data or are prone to be lost, sectors can be regenerated by having the related keys, or can be overwritted from another hdd formatted in the same PS3 (all hdds formatted by the same PS3 shares the same encryption with the same keys)
- Some users lost the "HDD partition table" when connecting the HDD to a windows PC, because windows will try to "initialize" the HDD, and this initialization implyes to write an MBR of size 1 sector (so if the user accepts the initialization the first sector of the HDD will be lost). This can be solved by connecting another hdd to PS3 and allow PS3 to format it (this regenerates the HDD partition table), then is posible to connect the HDD to PC and "backup" the first sector with a hexeditor (like HxD)... this sector can be used to repair the other HDD. This process doesnt needs any key, is just a copy-paste of sectors from 2 HDD's
- When the "boot otheros" flag is used under GameOS, but the petitboot partition is damaged, or petitboot is not present, corrupted, etc... (or when failing at updating petitboot) the console enters is a loop/brick where the bootchain tryes to boot from petitboot, but the system is not able to find it. To fix this problem is needed to "regenerate" the contents of the petitboot region in PC as explained here: how to fix a corrupted petitboot region in PC. This process needs the keys
- Alternativelly, is posible to make backups of this criticall sectors in PC just in case some day are needed. Having the backuped sectors the fix consists simply in a copy-paste of them, no keys needed

Encryption Notes: ?????
- Encryption is made "by sector" (data is accessed in chunks of 512 bytes and encrypted/decrypted individually), applyed "at write time" (only used sectors are encrypted), and "by device" (real and virtual devices). In the practise this means for PS3 NAND models all the HDD sectors are under 1 single encryption layer, but for PS3 NOR models (with a "virtual flash device" embedded inside "real hdd device") there is a "top" encryption layer over the whole HDD, and a "bottom" encryption layer over VFLASH (or in other words... in NOR models the sectors inside VFLASH are encrypted 2 times)
- HDD encryption layer (top), based in the ata-data-key:
  - FAT-NAND (no vflash): AES-CBC-192 (ata-data-key and zeroed IV)
  - FAT-NOR (with vflash): AES-CBC-192 (ata-data-key and zeroed IV) ?
  - SLIM-NOR (with vflash): XTS-AES-128 (ata-data-key and ata-tweak-key)
- VFLASH encryption layer (bottom), based in the encdec-key:
  - FAT-NOR (with vflash): AES-CBC-128 (encdec-key and zeroed IV)
  - SLIM-NOR (with vflash): XTS-AES-128 (encdec-data-key and encdec-tweak-key)

HDD Partition Table example from a PS3 DECHA00A (NAND flash) with official OtherOS installed under firmware 2.80 ---> http://www.mediafire.com/download/ou90bz0h0mw8tco/HDD_ptab_DECHA00A_OtherOS

Partition formatting in a service mode firmware installation for NOR flash. Google it: http://lmgtfy.com/?q=site%3Ahttp%3A%2F%2Fpastebin.com%2F+%22vflash+is+enabled...%22

manufacturing updating start
PackageName = /dev_usb000/PS3UPDAT.PUP
settle polling interval success
vflash is enabled...
creating system regions...
create storage region: (region id = 1)
create storage region: (region id = 2)
format partition: (region_id = 2, CELL_FS_UTILITY:HDD0, CELL_FS_UFS)
create storage region: (region id = 3)
format partition: (region_id = 3, CELL_FS_UTILITY:HDD1, CELL_FS_FAT)
creating system regions done.
boot from nor flash...
creating nor flash regions...
create storage region: (region id = 2)
create storage region: (region id = 3)
creating flash regions...
create storage region: (region id = 1)
create storage region: (region id = 2)
format partition: (region_id = 2, CELL_FS_IOS:BUILTIN_FLSH1, CELL_FS_FAT)
create storage region: (region id = 3)
format partition: (region_id = 3, CELL_FS_IOS:BUILTIN_FLSH2, CELL_FS_FAT)
create storage region: (region id = 4)
format partition: (region_id = 4, CELL_FS_IOS:BUILTIN_FLSH3, CELL_FS_FAT)
create storage region: (region id = 5)
create storage region: (region id = 6)

Partition formatting in a service mode firmware installation for NAND flash. Google it: http://lmgtfy.com/?q=site%3Ahttp%3A%2F%2Fpastebin.com%2F+%22vflash+is+disabled...%22

manufacturing updating start
PackageName = /dev_usb000/PS3UPDAT.PUP
settle polling interval success
vflash is disabled...
boot from nand flash...
creating flash regions...
create storage region: (region id = 2)
format partition: (region_id = 2, CELL_FS_IOS:BUILTIN_FLSH1, CELL_FS_FAT)
create storage region: (region id = 3)
format partition: (region_id = 3, CELL_FS_IOS:BUILTIN_FLSH2, CELL_FS_FAT)
create storage region: (region id = 4)
format partition: (region_id = 4, CELL_FS_IOS:BUILTIN_FLSH3, CELL_FS_FAT)
create storage region: (region id = 5)
create storage region: (region id = 6)

Other flash/hdd regions. Google it: http://lmgtfy.com/?q=site%3Ahttp%3A%2F%2Fpastebin.com%2F+%22CELL_FS_UTILITY%3AHDD2%22 and Mountpoints

Experimental attempt to recover deleted files from gameos partition: http://playstationhax.it/forums/topic/826-recovering-deleted-save-games-eid-dumper-troubles-mounting-the-encrypted-ufs2-filesystem/

Speed tests running in PS3 natively

Speed Tests (PS3)
Brand	Series	Model	Linux			GameOs
			[hdparm -Tt]			N/A
			Cache read ^(MB/s)	Disk read ^(MB/s)	Link

Fujitsu	MHW	MHW2040BH			N/A
	MHZ	MHZ2080BH			N/A
	MHZ	MHZ2160BH			N/A

Hitachi	Travelstar 5K160	HTS541640J9SA00			N/A
	Travelstar 5K250	HTS542580K9SA00			N/A
	Travelstar 5K500	HTS545012B9SA00			N/A
	Travelstar Z5K500	HTS545050A7E380			N/A

Seagate	Momentus 5400.2	ST96812AS			N/A
	Momentus 5400.3	ST980811AS			N/A
	LD25 SATA	ST920217AS			N/A
	LD25 SATA	ST9402115AS			N/A
	LD25 5400.2	ST940210AS			N/A

Toshiba	MKxx52GSX	MK8052GSX			N/A
	MKxx52GSX	MK1652GSX			N/A
	MKxx55GSX	MK1255GSX			N/A
	MKxx55GSX	MK2555GSX			N/A
	MKxx65GSX	MK1665GSX			N/A
	MKxx65GSX	MK3265GSX			N/A
	MKxx76GSX	MK1676GSX			N/A
	MKxx76GSX	MK3276GSX			N/A

HDD vs SSD

Phat NAND HDD Entropy Table (After zerofill,no vflash)

Start Offset	End Offset	Size	Description
0x0000	0x1000	0x1000	Header
0x4000	0x16000	0x12000	unknown
0x18000	0x28000	0x10000	unknown

file

Slim NOR HDD Data Table (After zerofill,vflash)

Start Offset	End Offset	Size	Description
0x0	0x2000	0x2000	Header
0x4400	0x8118240	please fill	unk
0x8119000	0x8149960	please fill	unk
0x814B000	0x8152CB0	please fill	unk
0x8153000	0x81530C0	please fill	unk
0x8155000	0x8159B10	please fill	unk
0x815B000	0x815E3D0	please fill	unk
0x815F000	0x8166190	please fill	unk
0x8167000	0x817B750	please fill	unk
0x817D000	0x817D5C0	please fill	unk
0x817F000	0x818A500	please fill	unk
0x818B000	0x818CDC0	please fill	unk
0x818D000	0x81C9F10	please fill	unk
0x81CB000	0x81D1FD0	please fill	unk
0x81D3000	0x81D9E20	please fill	unk
0x81DB000	0x81DB1B0	please fill	unk
0x81DD000	0x81DD0A0	please fill	unk
0x81DF000	0x81DF090	please fill	unk
0x81E1000	0x81E1080	please fill	unk
0x81E3000	0x81E3090	please fill	unk
0x81E5000	0x81E50A0	please fill	unk
0x81E7000	0x81E70A0	please fill	unk
0x81E9000	0x81E9090	please fill	unk
0x81EB000	0x81F4CD0	please fill	unk

There is actual readable data near the end of the disk, so this has been renamed to Data Table instead of Entropy Table
The table is incomplete, please help filling it.
the dump and key

GameOS fsck

code uses memory container ( there is also fsck without ) - does fsck on hdd0:

LOAD:0000000000030270 .set var_3C, -0x3C
LOAD:0000000000030270 .set var_38, -0x38
LOAD:0000000000030270 .set var_34, -0x34
LOAD:0000000000030270 .set var_30, -0x30
LOAD:0000000000030270 .set var_20, -0x20
LOAD:0000000000030270 .set var_18, -0x18
LOAD:0000000000030270 .set arg_10,  0x10
LOAD:0000000000030270
LOAD:0000000000030270                 lis       r9, aFsck_cfs@h # "fsck_cfs"
LOAD:0000000000030274                 mflr      r0
LOAD:0000000000030278                 lis       r11, aY@h     # "-y"
LOAD:000000000003027C                 lis       r10, aHdd0@h  # "hdd0"
LOAD:0000000000030280                 stdu      r1, -0xB0(r1)
LOAD:0000000000030284                 addi      r9, r9, aFsck_cfs@l # "fsck_cfs"
LOAD:0000000000030288                 addi      r11, r11, aY@l # "-y"
LOAD:000000000003028C                 addi      r10, r10, aHdd0@l # "hdd0"
LOAD:0000000000030290                 std       r28, 0xB0+var_20(r1)
LOAD:0000000000030294                 li        r3, 1 = "App" 
LOAD:0000000000030298                 li        r28, 0
LOAD:000000000003029C                 stw       r11, 0xB0+var_38(r1)
LOAD:00000000000302A0                 std       r0, 0xB0+arg_10(r1)
LOAD:00000000000302A4                 stw       r9, 0xB0+var_3C(r1)
LOAD:00000000000302A8                 stw       r10, 0xB0+var_34(r1)
LOAD:00000000000302AC                 std       r29, 0xB0+var_18(r1)
LOAD:00000000000302B0                 stw       r28, 0xB0+var_30(r1)
LOAD:00000000000302B4                 bl        _vsh_E7C34044_getMemoryContainerId
LOAD:00000000000302B8                 clrldi    r4, r3, 32
LOAD:00000000000302BC                 addi      r6, r1, 0xB0+var_40
LOAD:00000000000302C0                 li        r5, 0x200
LOAD:00000000000302C4                 lis       r3, 0x200
LOAD:00000000000302C8                 stw       r28, 0xB0+var_40(r1)
LOAD:00000000000302CC                 bl        sys_memory_allocate_from_container
LOAD:00000000000302D0                 lis       r7, stru_1429E8@h
LOAD:00000000000302D4                 lwz       r5, 0xB0+var_40(r1)
LOAD:00000000000302D8                 addi      r4, r1, 0xB0+var_3C
LOAD:00000000000302DC                 addi      r7, r7, stru_1429E8@l
LOAD:00000000000302E0                 lis       r6, 0x200
LOAD:00000000000302E4                 li        r8, 0
LOAD:00000000000302E8                 li        r3, 3
LOAD:00000000000302EC                 bl        _fs_utility_init_1F3CD9F1
LOAD:00000000000302F0                 li        r11, 0x15D    # sys_memory_free
LOAD:00000000000302F4                 mr        r29, r3
LOAD:00000000000302F8                 lwz       r3, 0xB0+var_40(r1)
LOAD:00000000000302FC                 sc
LOAD:0000000000030300                 clrldi    r3, r29, 32
LOAD:0000000000030304                 bl        _sysPrxForUser_sys_ppu_thread_exit
LOAD:0000000000030308                 lis       r9, dword_146D74@h
LOAD:000000000003030C                 ld        r0, 0xB0+arg_10(r1)
LOAD:0000000000030310                 ld        r29, 0xB0+var_18(r1)
LOAD:0000000000030314                 mtlr      r0
LOAD:0000000000030318                 stw       r28, dword_146D74@l(r9)
LOAD:000000000003031C                 ld        r28, 0xB0+var_20(r1)
LOAD:0000000000030320                 addi      r1, r1, 0xB0
LOAD:0000000000030324                 blr
LOAD:0000000000030324 # End of function fsck_cfs_main

DECR (reference tool) and GECR (arcade)

Uses 3.5" (size) hdd's

DECR-1000 - 2x Seagate Barracuda ST3400820A6 (7200.10 400Gbytes [email protected] [email protected])

Talk:Harddrive: Difference between revisions

Revision as of 20:54, 11 June 2021

Contents

Todo

maximum size internal drive

Using Normal Mode and Recovery - when trying to install a 1.5TB 3.5" drive as internal (using an eSATA cradle)

Using Factory Service Mode - when trying to install a 1.5TB 3.5" drive as internal (using an eSATA cradle) FSM

Going back to the 1TB and crosschecking

maximum size external drive

Tests increasing the max HDD capacity supported by the firmware

AES-256-CBC versus AES-256-XTS

PS3 HDD reader for windows by 3141card

Experimental Tables

HDD partitions

HDD partitions table info

Speed tests running in PS3 natively

HDD vs SSD

Phat NAND HDD Entropy Table (After zerofill,no vflash)

Slim NOR HDD Data Table (After zerofill,vflash)

GameOS fsck

DECR (reference tool) and GECR (arcade)

Navigation menu

Talk:Harddrive: Difference between revisions

Revision as of 20:54, 11 June 2021

Todo

maximum size internal drive

Using Normal Mode and Recovery - when trying to install a 1.5TB 3.5" drive as internal (using an eSATA cradle)

Using Factory Service Mode - when trying to install a 1.5TB 3.5" drive as internal (using an eSATA cradle) FSM

Going back to the 1TB and crosschecking

maximum size external drive

Tests increasing the max HDD capacity supported by the firmware

AES-256-CBC versus AES-256-XTS

PS3 HDD reader for windows by 3141card

Experimental Tables

HDD partitions

HDD partitions table info

Speed tests running in PS3 natively

HDD vs SSD

Phat NAND HDD Entropy Table (After zerofill,no vflash)

Slim NOR HDD Data Table (After zerofill,vflash)

GameOS fsck

DECR (reference tool) and GECR (arcade)

Navigation menu

Search