Difference between revisions of "Service Connectors"

From PS3 Developer wiki
Jump to: navigation, search
m (CN????)
m (Bluray Drive Diagnostic Port)
 
(11 intermediate revisions by 2 users not shown)
Line 1: Line 1:
<div style="float:right">[[File:PS3 Service Connector 1st Generation COK-002.jpg|200px|thumb|left|PS3 [[Service Connectors|Service Connector]] 1st Generation [[COK-00x#COK-002|COK-002]]]]</div>
+
= Service Connectors =
 
JTAG/UART/SPI/Diagnostic I/O used in Sony repair centers if a PS3 couldn't be fixed by software.
 
JTAG/UART/SPI/Diagnostic I/O used in Sony repair centers if a PS3 couldn't be fixed by software.
  
Line 5: Line 5:
 
* [[EBUS]] and [[Hardware_flashing#NOR_Interface_Testpoints|NOR Interface Testpoints]] are the ''storage'' related service points used with pinJIG/pogopin infactory
 
* [[EBUS]] and [[Hardware_flashing#NOR_Interface_Testpoints|NOR Interface Testpoints]] are the ''storage'' related service points used with pinJIG/pogopin infactory
 
* [[PCI]] also has some pads for [[South Bridge]] I/O service/diagnostics.
 
* [[PCI]] also has some pads for [[South Bridge]] I/O service/diagnostics.
 
= Service Connectors =
 
  
 
==Preproduction Generation==
 
==Preproduction Generation==
Line 166: Line 164:
 
<div style="float:right">[[File:PS3 PinJIG Connector 1st Generation COOKIE-13.jpg|100px|thumb|left|First Generation Connector as seen on [[COOKIE-13]]]]</div>
 
<div style="float:right">[[File:PS3 PinJIG Connector 1st Generation COOKIE-13.jpg|100px|thumb|left|First Generation Connector as seen on [[COOKIE-13]]]]</div>
 
<div style="float:right">[[File:PinJig Port to Testpoints COK-001.jpg|120px|thumb|left|Pogo-pins to Testpoints on [[COK-00x#COK-001|COK-001]]]]</div>
 
<div style="float:right">[[File:PinJig Port to Testpoints COK-001.jpg|120px|thumb|left|Pogo-pins to Testpoints on [[COK-00x#COK-001|COK-001]]]]</div>
 +
<div style="float:right">[[File:PS3 Service Connector 1st Generation COK-002.jpg|200px|thumb|left|PS3 [[Service Connectors|Service Connector]] 1st Generation [[COK-00x#COK-002|COK-002]]]]</div>
  
 
{| class="wikitable"
 
{| class="wikitable"
Line 235: Line 234:
  
 
=== CELL_BE JTAG Testpads===
 
=== CELL_BE JTAG Testpads===
<div style="float:right">[[File:CELL BE TESTPADS @COK001.JPG|170px|thumb|left|[[CELL BE]] JTAG Testpads as seen on [[COK-00x#COK-001|COK-001]] and [[COK-00x#COK-002|COK-002]]]]</div>
+
<div style="float:right">[[File:CELL BE TESTPADS @COK001.JPG|200px|thumb|left|[[CELL BE]] JTAG Testpads as seen on [[COK-00x#COK-001|COK-001]] and [[COK-00x#COK-002|COK-002]]]]</div>
  
 
{| class="wikitable"
 
{| class="wikitable"
Line 251: Line 250:
 
|-
 
|-
 
|}
 
|}
 +
<br style="clear: both;" />
  
 
==2nd Generation==
 
==2nd Generation==
 
{| class="wikitable"
 
{| class="wikitable"
 +
|-
 
! Used on !! Type of Connector
 
! Used on !! Type of Connector
 
<!-- ZIF Connector : 2x Kyocera 046239010001800+ -->
 
<!-- ZIF Connector : 2x Kyocera 046239010001800+ -->
Line 264: Line 265:
 
|- bgcolor="#eeeeee"
 
|- bgcolor="#eeeeee"
 
| [[DEB-001]] || Plain socket
 
| [[DEB-001]] || Plain socket
|-
 
 
|}
 
|}
<div style="float:right">[[File:PS3 PinJIG Connector 2nd Generation DIA-001.jpg|thumb|left|Second Generation Connector as seen on DIA-001]]</div>
+
 
 
===CN4003===
 
===CN4003===
 +
<div style="float:right">[[File:PS3 PinJIG Connector 2nd Generation DIA-001.jpg|200px|thumb|left|Second Generation Connectors as seen on DIA-001<br>CN4003 at left, CN4004 at right]]</div>
 +
 
{| class="wikitable"
 
{| class="wikitable"
 +
|-
 
! Pin !! Pogo-Pin Con. !! Name !! Connected to !! Function !! Group
 
! Pin !! Pogo-Pin Con. !! Name !! Connected to !! Function !! Group
 
|-
 
|-
| 10 || {{YES}} || SC_TXD || style="background-color:green;color:white" | Syscon || Serial Transmit || rowspan="2" | <b>[[Syscon_Hardware#Syscon_UART|Syscon UART]]</b>
+
| 1 || {{NO}} || GND || style="background-color:black;color:white" | DC-DC Regulator || Ground line || rowspan="2" | <b>-</b>
 
|-
 
|-
| 9 || {{YES}} || SC_RXD || style="background-color:green;color:white" | Syscon || Serial Receive
+
| 2 || {{NO}} || +5V_EVER || style="background-color:red;color:white" | DC-DC Regulator || +5V line
 
|-
 
|-
| 8 || {{NO}} || RMC || style="background-color:green;color:white" | Syscon || Reset MechaCon OR TestMode <!-- disables Power & Eject buttons --> || rowspan="3" | <b>[[Syscon_Hardware#Syscon_Modes|Syscon Modes]]</b>
+
| 3 || {{NO}} || SW_4_B || style="background-color:yellow" | USB || Power Switch || <b>[[USB]]</b>
 
|-
 
|-
| 7 || {{YES}} || Diag Mode || style="background-color:green;color:white" | Syscon || Diagnose Mode
+
| 4 || {{NO}} || SB_SIO0_TXD_M || style="background-color:blue;color:white" | South Bridge || Serial Transmit || rowspan="2" | <b>[[PCI#South_Bridge_serial|South Bridge UART]]</b>
 
|-
 
|-
| 6 || {{YES}} || Backup Mode || style="background-color:green;color:white" | Syscon || Backup Mode
+
| 5 || {{NO}} || SB_SIO0_RXD_M || style="background-color:blue;color:white" | South Bridge || Serial Receive
 
|-
 
|-
| 5 || {{NO}} || SB_SIO0_RXD_M || style="background-color:blue;color:white" | South Bridge || Serial Receive || rowspan="2" | <b>[[PCI#South_Bridge_serial|South Bridge UART]]</b>
+
| 6 || {{YES}} || Backup Mode || style="background-color:green;color:white" | Syscon || Backup Mode || rowspan="3" | <b>[[Syscon_Hardware#Syscon_Modes|Syscon Modes]]</b>
 
|-
 
|-
| 4 || {{NO}} || SB_SIO0_TXD_M || style="background-color:blue;color:white" | South Bridge || Serial Transmit
+
| 7 || {{YES}} || Diag Mode || style="background-color:green;color:white" | Syscon || Diagnose Mode
 
|-
 
|-
| 3 || {{NO}} || SW_4_B || style="background-color:yellow" | USB || Power Switch || <b>[[USB]]</b>
+
| 8 || {{NO}} || RMC || style="background-color:green;color:white" | Syscon || Reset MechaCon OR TestMode <!-- disables Power & Eject buttons -->
 
|-
 
|-
| 2 || {{NO}} || +5V_EVER || style="background-color:red;color:white" | DC-DC Regulator || +5V line || rowspan="2" | <b>-</b>
+
| 9 || {{YES}} || SC_RXD || style="background-color:green;color:white" | Syscon || Serial Receive || rowspan="2" | <b>[[Syscon_Hardware#Syscon_UART|Syscon UART]]</b>
|-
 
| 1 || {{NO}} || GND || style="background-color:black;color:white" | DC-DC Regulator || Ground line
 
 
|-
 
|-
 +
| 10 || {{YES}} || SC_TXD || style="background-color:green;color:white" | Syscon || Serial Transmit
 
|}
 
|}
  
 
===CN4004===
 
===CN4004===
 
{| class="wikitable"
 
{| class="wikitable"
 +
|-
 
! Pin !! Pogo-Pin Con. !! Name !! Connected to !! Function !! Group
 
! Pin !! Pogo-Pin Con. !! Name !! Connected to !! Function !! Group
 
|-
 
|-
| 10 || {{YES}} || TRST || style="background-color:green;color:white" | Syscon || Test Reset (nTRST) || rowspan="7" | <b>[[Syscon_Hardware#Syscon_JTAG|Syscon JTAG]]</b>
+
| 1 || {{NO}} || GND || style="background-color:black;color:white" | DC-DC Regulator || Ground line || rowspan="3" | <b>-</b>
 
|-
 
|-
| 9 || {{YES}} || TDI || style="background-color:green;color:white" | Syscon || Test Data In
+
| 2 || {{NO}} || GND || style="background-color:black;color:white" | DC-DC Regulator || Ground line
 
|-
 
|-
| 8 || {{YES}} || RTCK || style="background-color:green;color:white" | Syscon || Return Test Clock
+
| 3 || {{NO}} || +3.3V_EVER || style="background-color:red;color:white" | DC-DC Regulator || +3.3V line
|-
 
| 7 || {{YES}} || TCK || style="background-color:green;color:white" | Syscon || Test Clock
 
 
|-
 
|-
| 6 || {{YES}} || TDO || style="background-color:green;color:white" | Syscon || Test Data Out
+
| 4 || {{YES}} || SC_RESET || style="background-color:green;color:white" | Syscon || System Reset (nSRST) || rowspan="7" | <b>[[Syscon_Hardware#Syscon_JTAG|Syscon JTAG]]</b>
 
|-
 
|-
 
| 5 || {{YES}} || TMS || style="background-color:green;color:white" | Syscon || Test Mode Select
 
| 5 || {{YES}} || TMS || style="background-color:green;color:white" | Syscon || Test Mode Select
 
|-
 
|-
| 4 || {{YES}} || SC_RESET || style="background-color:green;color:white" | Syscon || System Reset (nSRST)
+
| 6 || {{YES}} || TDO || style="background-color:green;color:white" | Syscon || Test Data Out
 
|-
 
|-
| 3 || {{NO}} || +3.3V_EVER || style="background-color:red;color:white" | DC-DC Regulator || +3.3V line || rowspan="3" | <b>-</b>
+
| 7 || {{YES}} || TCK || style="background-color:green;color:white" | Syscon || Test Clock
 
|-
 
|-
| 2 || {{NO}} || GND || style="background-color:black;color:white" | DC-DC Regulator || Ground line
+
| 8 || {{YES}} || RTCK || style="background-color:green;color:white" | Syscon || Return Test Clock
 
|-
 
|-
| 1 || {{NO}} || GND || style="background-color:black;color:white" | DC-DC Regulator || Ground line
+
| 9 || {{YES}} || TDI || style="background-color:green;color:white" | Syscon || Test Data In
 
|-
 
|-
 +
| 10 || {{YES}} || TRST || style="background-color:green;color:white" | Syscon || Test Reset (nTRST)
 
|}
 
|}
  
<div style="float:right">[[File:CELL BE TESTPADS.jpg|thumb|left|Second Generation Connector as seen on SEM-001]]</div>
 
 
===CN1001 (CELL_BE_JTAG)===
 
===CN1001 (CELL_BE_JTAG)===
 +
<div style="float:right">[[File:CELL BE TESTPADS.jpg|200px|thumb|left|Second Generation CN1001 Connector as seen on SEM-001]]</div>
 +
 
{| class="wikitable"
 
{| class="wikitable"
! Pin !! Pogo-Pin Con. !! Name !! Connected to !! Function !! Group
 
 
|-
 
|-
| 12 || {{NO}} || GND || style="background-color:black;color:white" | DC-DC Regulator || Ground line
+
! Pin !! Pogo-Pin Con. !! Name !! Connected to !! Function
 
|-
 
|-
| 11 || {{NO}} || +1.2V_MC2_VDDIO || style="background-color:red;color:white" | DC-DC Regulator || +1.2V Line
+
| 1 || {{NO}} || BE_TDI || style="background-color:magenta;color:white" | CELL BE || Test Data In
 
|-
 
|-
| 10 || {{NO}} || GND || style="background-color:black;color:white" | DC-DC Regulator || Ground line
+
| 2 || {{NO}} || BE_TRST || style="background-color:magenta;color:white" | CELL BE || Test Reset (nTRST)
 
|-
 
|-
| 9 || {{NO}} || BE_POWGOOD || style="background-color:magenta;color:white" | CELL BE || Power Good
+
| 3 || {{NO}} || BE_TCK || style="background-color:magenta;color:white" | CELL BE || Test Clock
 
|-
 
|-
| 8 || {{NO}} || BE_RESET || style="background-color:magenta;color:white" | CELL BE || Cell Reset
+
| 4 || {{NO}} || BE_TMS || style="background-color:magenta;color:white" | CELL BE || Test Mode Select
 
|-
 
|-
| 7 || {{NO}} || /BE_CHKSTP_OUT || style="background-color:magenta;color:white" | CELL BE || Cell Checkstop Out
+
| 5 || {{NO}} || BE_TDO || style="background-color:magenta;color:white" | CELL BE || Test Data Out
 
|-
 
|-
 
| 6 || {{NO}} || /BE_RESET_AND || style="background-color:magenta;color:white" | CELL BE || Cell Reset?
 
| 6 || {{NO}} || /BE_RESET_AND || style="background-color:magenta;color:white" | CELL BE || Cell Reset?
 
|-
 
|-
| 5 || {{NO}} || BE_TDO || style="background-color:magenta;color:white" | CELL BE || Test Data Out
+
| 7 || {{NO}} || /BE_CHKSTP_OUT || style="background-color:magenta;color:white" | CELL BE || Cell Checkstop Out
 
|-
 
|-
| 4 || {{NO}} || BE_TMS || style="background-color:magenta;color:white" | CELL BE || Test Mode Select
+
| 8 || {{NO}} || BE_RESET || style="background-color:magenta;color:white" | CELL BE || Cell Reset
 
|-
 
|-
| 3 || {{NO}} || BE_TCK || style="background-color:magenta;color:white" | CELL BE || Test Clock
+
| 9 || {{NO}} || BE_POWGOOD || style="background-color:magenta;color:white" | CELL BE || Power Good
 
|-
 
|-
| 2 || {{NO}} || BE_TRST || style="background-color:magenta;color:white" | CELL BE || Test Reset (nTRST)
+
| 10 || {{NO}} || GND || style="background-color:black;color:white" | DC-DC Regulator || Ground line
 
|-
 
|-
| 1 || {{NO}} || BE_TDI || style="background-color:magenta;color:white" | CELL BE || Test Data In
+
| 11 || {{NO}} || +1.2V_MC2_VDDIO || style="background-color:red;color:white" | DC-DC Regulator || +1.2V Line
 
|-
 
|-
 +
| 12 || {{NO}} || GND || style="background-color:black;color:white" | DC-DC Regulator || Ground line
 
|}
 
|}
  
Line 385: Line 388:
 
|-
 
|-
 
|}
 
|}
 
<gallery>
 
File:PS3 Service Connector VER-001-small.jpg|Third Generation Service Connector as seen on VER-001
 
File:PS3 PinJIG Connector 3rd Generation DYN-001.jpg|Third Generation Service Connector as seen on DYN-001
 
File:PS3 Service Connector DYN-001.jpg|Third Generation Service Connector as seen on DYN-001
 
File:PS3 PinJIG Connector 3rd Generation SURTEES-03.jpg|Third Generation Service Connector as seen on SURTEES-03
 
File:PS3 Service Connector JSD-001.jpg|Third Generation Service Connector as seen on JSD-001
 
File:PS3 Service Connector MPX-001 12GB.jpg|Third Generation Service Connector as seen on MPX-001
 
File:Service connector 3rd gen VERTIGO.jpg|PS3 Service Connector 3rd gen on [[VER-001|VERTIGO]]
 
</gallery>
 
  
 
===CN????===
 
===CN????===
 +
This connector was introduced at the same time than the first [[Sherwood]] syscon (in [[VER-001]] motherboard with a [[SW-301]] syscon), and it seems to be used in all the next motherboards with syscons from the [[SW2-30x]] or [[SW3-30x]] series
 +
<div style="float:right">[[File:Service connector 3rd gen VERTIGO.jpg|200px|thumb|left|PS3 Service Connector 3rd gen on [[VER-001|VERTIGO]]]]</div>
 
{| class="wikitable"
 
{| class="wikitable"
 +
|-
 
! Pin !! Pogo-Pin Con. !! Name !! Connected to !! Function !! Group
 
! Pin !! Pogo-Pin Con. !! Name !! Connected to !! Function !! Group
 
|-
 
|-
| 14 || {{NO}} || SB_PIO14? || style="background-color:blue;color:white" | South Bridge || ? || ?
+
| 1 || {{NO}} || +5V_EVER || style="background-color:red;color:white" | DC-DC Regulator || +5V line || rowspan="2" | <b>-</b>
 +
|-
 +
| 2 || {{NO}} || GND || style="background-color:black;color:white" | DC-DC Regulator || Ground line
 
|-
 
|-
| 13 || {{YES}} || TOOL1 || style="background-color:green;color:white" | Syscon || Clock output for tool  || <b>[[Syscon_Hardware#Syscon_JTAG|Syscon JTAG]]</b> (throught missing SMD components. See: [[Media:SC_Serv_Connector.JPG|line 13 disconnected]])
+
| 3 || {{NO}} || "P73" || style="background-color:green;color:white" | Syscon || (GPIO) || <b>[[Syscon_Hardware#Syscon_Modes|Syscon Modes]]</b>?<!--Connected to pin 5 of [[Talk:Regulators#D35653_0S25]]... so this pin is directly (or indirectly) related with flash power states-->
 
|-
 
|-
| 12 || {{YES}} || "P65" || style="background-color:green;color:white" | Syscon || (GPIO) || <b>[[Syscon_Hardware#Syscon_Modes|Syscon Modes]]</b>? (throught missing SMD components. See: [[Media:SC_Serv_Connector.JPG|line 12 disconnected]])
+
| 4 || {{NO}} || SB_SIO0_TXD_M || style="background-color:blue;color:white" | South Bridge || Serial Transmit || rowspan="2" |<b>[[PCI#South_Bridge_serial|South Bridge UART]]</b> (throught 2 missing SMD components [[Media:PCI connector JSD-001 SB and SC UART.jpg|at the left of the PCI testpads 75 and 77]])
 
|-
 
|-
| 11 || {{YES}} || SC_RxD || style="background-color:green;color:white" | Syscon || Serial Receive || rowspan="2" | <b>[[Syscon_Hardware#Syscon_UART|Syscon UART]]</b> (throught missing SMD components. See : [[Media:SC_Serv_Connector.JPG|lines 10,11 disconnected]])
+
| 5 || {{NO}} || SB_SIO0_RXD_M || style="background-color:blue;color:white" | South Bridge || Serial Receive
 
|-
 
|-
| 10 || {{YES}} || SC_TxD || style="background-color:green;color:white" | Syscon || Serial Transmit
+
| 6 || {{NO}} || SB_PIO15? || style="background-color:blue;color:white" | South Bridge || ? || ?
 
|-
 
|-
| 9 || {{NO}} || RESET <!-- low active --> || style="background-color:green;color:white" | Syscon || Reset || rowspan="3" | <b>[[Syscon_Hardware#Syscon_JTAG|Syscon JTAG]]</b> (throught missing SMD components. See: [[Media:Syscon_SW2-303_Unsoldered.JPG|lines 7,8,9 disconnected]])
+
| 7 || {{NO}} || TOOL0 || style="background-color:green;color:white" | Syscon || Data input/output for tool  || rowspan="3" | <b>[[Syscon_Hardware#Syscon_JTAG|Syscon JTAG]]</b> (throught missing SMD components. See: [[Media:Syscon_SW2-303_Unsoldered.JPG|lines 7,8,9 disconnected]])
 
|-
 
|-
 
| 8 || {{NO}} || FLMD0 || style="background-color:green;color:white" | Syscon || Flash programming mode
 
| 8 || {{NO}} || FLMD0 || style="background-color:green;color:white" | Syscon || Flash programming mode
 
|-
 
|-
| 7 || {{NO}} || TOOL0 || style="background-color:green;color:white" | Syscon || Data input/output for tool
+
| 9 || {{NO}} || RESET <!-- low active --> || style="background-color:green;color:white" | Syscon || Reset
 
|-
 
|-
| 6 || {{NO}} || SB_PIO15? || style="background-color:blue;color:white" | South Bridge || ? || ?
+
| 10 || {{YES}} || SC_TxD || style="background-color:green;color:white" | Syscon || Serial Transmit || rowspan="2" | <b>[[Syscon_Hardware#Syscon_UART|Syscon UART]]</b> (throught missing SMD components. See : [[Media:SC_Serv_Connector.JPG|lines 10,11 disconnected]])
 
|-
 
|-
| 5 || {{NO}} || SB_SIO0_RXD_M || style="background-color:blue;color:white" | South Bridge || Serial Receive || rowspan="2" |<b>[[PCI#South_Bridge_serial|South Bridge UART]]</b> (throught 2 missing SMD components located next to the PCI connector/testpads)
+
| 11 || {{YES}} || SC_RxD || style="background-color:green;color:white" | Syscon || Serial Receive
 
|-
 
|-
| 4 || {{NO}} || SB_SIO0_TXD_M || style="background-color:blue;color:white" | South Bridge || Serial Transmit
+
| 12 || {{YES}} || "P65" || style="background-color:green;color:white" | Syscon || (GPIO) || <b>[[Syscon_Hardware#Syscon_Modes|Syscon Modes]]</b>? (throught missing SMD components. See: [[Media:SC_Serv_Connector.JPG|line 12 disconnected]])
 
|-
 
|-
| 3 || {{NO}} || "P73" || style="background-color:green;color:white" | Syscon || (GPIO) || <b>[[Syscon_Hardware#Syscon_Modes|Syscon Modes]]</b>?<!--Connected to pin 5 of [[Talk:Regulators#D35653_0S25]]... so this pin is directly (or indirectly) related with flash power states-->
+
| 13 || {{YES}} || TOOL1 || style="background-color:green;color:white" | Syscon || Clock output for tool  || <b>[[Syscon_Hardware#Syscon_JTAG|Syscon JTAG]]</b> (throught missing SMD components. See: [[Media:SC_Serv_Connector.JPG|line 13 disconnected]])
|-
 
| 2 || {{NO}} || GND || style="background-color:black;color:white" | DC-DC Regulator || Ground line || rowspan="2" | <b>-</b>
 
|-
 
| 1 || {{NO}} || +5V_EVER || style="background-color:red;color:white" | DC-DC Regulator || +5V line
 
 
|-
 
|-
 +
| 14 || {{NO}} || SB_PIO14? || style="background-color:blue;color:white" | South Bridge || ? || ?
 
|}
 
|}
  
 +
<gallery>
 +
File:PS3 Service Connector VER-001-small.jpg|Third Generation Service Connector as seen on VER-001
 +
File:PS3 PinJIG Connector 3rd Generation DYN-001.jpg|Third Generation Service Connector as seen on DYN-001
 +
File:PS3 Service Connector DYN-001.jpg|Third Generation Service Connector as seen on DYN-001
 +
File:PS3 PinJIG Connector 3rd Generation SURTEES-03.jpg|Third Generation Service Connector as seen on SURTEES-03
 +
File:PS3 Service Connector JSD-001.jpg|Third Generation Service Connector as seen on JSD-001
 +
File:PS3 Service Connector MPX-001 12GB.jpg|Third Generation Service Connector as seen on MPX-001
 +
</gallery>
 +
 +
===CELL_BE_JTAG===
 +
<div style="float:right">[[File:CELL BE TESTPADS JSD-001.jpg|200px|thumb|left|[[CELL BE]] TESTPADS on [[JSD-001]]]]</div>
 +
Same pinout than previous gen ?
 +
<br style="clear: both;" />
 +
 +
===Bluray Drive Diagnostic Port===
 +
<div style="float:right">[[File:Bluray Drive Diagnostic Port 28pin on JSD-001.jpg|200px|thumb|left|Unknown service connector on [[JSD-001]]]]</div>
 +
For pinout see: [[Bluray_Drive#CN300_45pin|CN300]]
 +
<br style="clear: both;" />
 +
 +
=Links=
 
https://web.archive.org/web/20160309151818/ http://pastie.org/private/h8osu80ksjr0xdta97zida <br>
 
https://web.archive.org/web/20160309151818/ http://pastie.org/private/h8osu80ksjr0xdta97zida <br>
 
https://pastebin.com/hp3Uz6F7 (mirror) <br>
 
https://pastebin.com/hp3Uz6F7 (mirror) <br>
 
http://docs-asia.electrocomponents.com/webdocs/14a3/0900766b814a341b.pdf
 
http://docs-asia.electrocomponents.com/webdocs/14a3/0900766b814a341b.pdf
 
{{Wikify}}
 
 
  
 
{{Motherboard Components}}<noinclude>[[Category:Main]]</noinclude>
 
{{Motherboard Components}}<noinclude>[[Category:Main]]</noinclude>

Latest revision as of 03:41, 4 June 2021

Service Connectors[edit]

JTAG/UART/SPI/Diagnostic I/O used in Sony repair centers if a PS3 couldn't be fixed by software.

Notes:

Preproduction Generation[edit]

Used on Type of Connector
MPU-501 (CEB-2040) CN6504: Headerpins
CN6507: ZIF Connector

CN6504 (SC_JTAG)[edit]

MPU-501 CN6504 SC_JTAG
Pin Pogo-Pin Con. Name Connected to Function Group
1 NO ? ? ?
2 NO ? ? ?
3 NO ? ? ?
4 NO ? ? ?
5 NO ? ? ?
6 NO ? ? ?
7 NO ? ? ?
8 NO ? ? ?
9 NO ? ? ?
10 NO ? ? ?
11 NO ? ? ?
12 NO ? ? ?
13 NO ? ? ?
14 NO ? ? ?
15 NO ? ? ?
16 NO ? ? ?
17 NO ? ? ?
18 NO ? ? ?
19 NO ? ? ?
20 NO ? ? ?

CN6507 (STATUS)[edit]

Pin Pogo-Pin Con. Name Connected to Function Group
1 NO ? ? ?
2 NO ? ? ?
3 NO ? ? ?
4 NO ? ? ?
5 NO ? ? ?
6 NO ? ? ?
7 NO ? ? ?
8 NO ? ? ?
9 NO ? ? ?

CN6504 (SC_JTAG) (DECR)[edit]

TMU-520 CN6504 SC_JTAG
Pin Pogo-Pin Con. Name Connected to Function Group
1 NO GND DC-DC Regulator Ground line -
2 ?? SC_RESET/RST Syscon System Reset Syscon JTAG
3 NO +3.3V_EVER DC-DC Regulator +3.3V line -
4 ?? JRTCK Syscon Return Test Clock Syscon JTAG
5 ?? JTCK Syscon Test Clock
6 ?? JTMS Syscon Test Mode Select
7 ?? JTDO Syscon Test Data Out
8 ?? JTDI Syscon Test Data In
9 ?? JNTRST Syscon Test Reset
10 NO +3.3V_EVER DC-DC Regulator +3.3V line -
  • (SC) RESET is connected to S6503 Button

Diag/Backup (DECR)[edit]

Pin Pogo-Pin Con. Name Connected to Function Group
- ?? Backup Mode? Syscon Backup Mode? Syscon Modes
- ?? Diag Mode? Syscon Diagnose Mode?
  • Backup is Connected to S6502-1 Switch
  • Diag is Connected to S6502-2 Switch

SC_UART (DECR)[edit]

Pin Pogo-Pin Con. Name Connected to Function Standby Voltage Group
- ?? +3.3V_EVER? DC-DC Regulator +3.3V line? 3.3 -
- ?? Rx? Syscon Receive UART? 0 Syscon UART
- ?? Tx? Syscon Transfer UART? 3.14
- ?? GND? DC-DC Regulator Ground line 0 -

Pictures (Traces from DECR)[edit]

1st Generation[edit]

Used on Type of Connector
COOKIE-13 ZIF Connector
COK-001 (Prototype) Plain socket
COK-001 Plain socket
COK-002 Plain socket
COK-002W Plain socket

CN4009[edit]

First Generation Connector as seen on COK-002
First Generation Connector as seen on COK-001
First Generation Connector as seen on COOKIE-13
Pogo-pins to Testpoints on COK-001
PS3 Service Connector 1st Generation COK-002
Pin Pogo-Pin Con. Name Connected to Function Group
1 NO +5V_EVER DC-DC Regulator +5V line -
2 YES TRST Syscon Test Reset (nTRST) Syscon JTAG
3 YES TDI Syscon Test Data In
4 YES RTCK Syscon Return Test Clock
5 YES TCK Syscon Test Clock
6 YES TDO Syscon Test Data Out
7 YES TMS Syscon Test Mode Select
8 YES SC_RESET Syscon System Reset (nSRST)
9 NO GND DC-DC Regulator Ground line -
10 YES RxD Syscon Serial Receive Syscon UART
11 YES TxD Syscon Serial Transmit
12 NO GND DC-DC Regulator Ground line -
13 YES Diag Mode Syscon Diagnose Mode Syscon Modes
14 YES Backup Mode Syscon Backup Mode
15 NO +3.3V_EVER DC-DC Regulator +3.3V line -
16 YES NC - -
17 NO RMC Syscon Reset MechaCon or TestMode Syscon Modes
18 NO SB_TxD South Bridge Serial Transmit South Bridge UART
19 NO SB_RxD South Bridge Serial Receive
20 NO SW_4_A (W)LAN Power Switch LAN & WLAN
21 NO BE_TRG_OUT CELL BE Trigger Out Component Tests
22 NO RSX_TRG_OUT RSX Trigger Out
23 NO SB_TRG_OUT South Bridge Trigger Out
24 NO BE_CHKSTP_OUT CELL BE Checkstop Out
25 NO RSX_CHKSTP_OUT RSX Checkstop Out
26 NO SB_CHKSTP_OUT South Bridge Checkstop Out
27 NO +1.2V_MC_VDDIO DC-DC Regulator +1.2V line -
28 NO +1.5V_RSX_VDDIO DC-DC Regulator +1.5V line
29 NO GND DC-DC Regulator Ground line
30 NO +5V_EVER DC-DC Regulator +5V line

It looks like Kayocera 6240

CELL_BE JTAG Testpads[edit]

CELL BE JTAG Testpads as seen on COK-001 and COK-002
Pin Pogo-Pin Con. Name Connected to Function Group
CL1103 YES TDO pin AW14 @ CELL BE Test Data Out CELL BE JTAG
CL1104 YES TDI pin AW13 @ CELL BE Test Data In
CL1105 YES TCK pin BA13 @ CELL BE Test Clock
CL1106 YES TMS pin AW12 @ CELL BE Test Mode Select
CL1107 YES /TRST pin AV14 @ CELL BE Test Reset (nTRST)


2nd Generation[edit]

Used on Type of Connector
SEM-001 Plain socket
DIA-001 Plain socket
DIA-002 Plain socket
DEB-001 Plain socket

CN4003[edit]

Second Generation Connectors as seen on DIA-001
CN4003 at left, CN4004 at right
Pin Pogo-Pin Con. Name Connected to Function Group
1 NO GND DC-DC Regulator Ground line -
2 NO +5V_EVER DC-DC Regulator +5V line
3 NO SW_4_B USB Power Switch USB
4 NO SB_SIO0_TXD_M South Bridge Serial Transmit South Bridge UART
5 NO SB_SIO0_RXD_M South Bridge Serial Receive
6 YES Backup Mode Syscon Backup Mode Syscon Modes
7 YES Diag Mode Syscon Diagnose Mode
8 NO RMC Syscon Reset MechaCon OR TestMode
9 YES SC_RXD Syscon Serial Receive Syscon UART
10 YES SC_TXD Syscon Serial Transmit

CN4004[edit]

Pin Pogo-Pin Con. Name Connected to Function Group
1 NO GND DC-DC Regulator Ground line -
2 NO GND DC-DC Regulator Ground line
3 NO +3.3V_EVER DC-DC Regulator +3.3V line
4 YES SC_RESET Syscon System Reset (nSRST) Syscon JTAG
5 YES TMS Syscon Test Mode Select
6 YES TDO Syscon Test Data Out
7 YES TCK Syscon Test Clock
8 YES RTCK Syscon Return Test Clock
9 YES TDI Syscon Test Data In
10 YES TRST Syscon Test Reset (nTRST)

CN1001 (CELL_BE_JTAG)[edit]

Second Generation CN1001 Connector as seen on SEM-001
Pin Pogo-Pin Con. Name Connected to Function
1 NO BE_TDI CELL BE Test Data In
2 NO BE_TRST CELL BE Test Reset (nTRST)
3 NO BE_TCK CELL BE Test Clock
4 NO BE_TMS CELL BE Test Mode Select
5 NO BE_TDO CELL BE Test Data Out
6 NO /BE_RESET_AND CELL BE Cell Reset?
7 NO /BE_CHKSTP_OUT CELL BE Cell Checkstop Out
8 NO BE_RESET CELL BE Cell Reset
9 NO BE_POWGOOD CELL BE Power Good
10 NO GND DC-DC Regulator Ground line
11 NO +1.2V_MC2_VDDIO DC-DC Regulator +1.2V Line
12 NO GND DC-DC Regulator Ground line

3rd Generation[edit]

Used on Type of Connector
VERTIGO-002 Unknown Connector
VER-001 Plain socket
DYN-001 Plain socket
SURTEES-03 Unknown Connector
SUR-001 Plain socket
JTP-001 Plain socket
JSD-001 Plain socket
KTEN-04 Unknown Connector
KTE-001 Plain socket
MSX-K02 Unknown Connector
MSX-001 Plain socket
MPX-001 Plain socket
NPX-001 Plain socket
PPX-001 Plain socket
PQX-001 Plain socket

CN????[edit]

This connector was introduced at the same time than the first Sherwood syscon (in VER-001 motherboard with a SW-301 syscon), and it seems to be used in all the next motherboards with syscons from the SW2-30x or SW3-30x series

PS3 Service Connector 3rd gen on VERTIGO
Pin Pogo-Pin Con. Name Connected to Function Group
1 NO +5V_EVER DC-DC Regulator +5V line -
2 NO GND DC-DC Regulator Ground line
3 NO "P73" Syscon (GPIO) Syscon Modes?
4 NO SB_SIO0_TXD_M South Bridge Serial Transmit South Bridge UART (throught 2 missing SMD components at the left of the PCI testpads 75 and 77)
5 NO SB_SIO0_RXD_M South Bridge Serial Receive
6 NO SB_PIO15? South Bridge ? ?
7 NO TOOL0 Syscon Data input/output for tool Syscon JTAG (throught missing SMD components. See: lines 7,8,9 disconnected)
8 NO FLMD0 Syscon Flash programming mode
9 NO RESET Syscon Reset
10 YES SC_TxD Syscon Serial Transmit Syscon UART (throught missing SMD components. See : lines 10,11 disconnected)
11 YES SC_RxD Syscon Serial Receive
12 YES "P65" Syscon (GPIO) Syscon Modes? (throught missing SMD components. See: line 12 disconnected)
13 YES TOOL1 Syscon Clock output for tool Syscon JTAG (throught missing SMD components. See: line 13 disconnected)
14 NO SB_PIO14? South Bridge ? ?

CELL_BE_JTAG[edit]

CELL BE TESTPADS on JSD-001

Same pinout than previous gen ?

Bluray Drive Diagnostic Port[edit]

Unknown service connector on JSD-001

For pinout see: CN300

Links[edit]

https://web.archive.org/web/20160309151818/ http://pastie.org/private/h8osu80ksjr0xdta97zida
https://pastebin.com/hp3Uz6F7 (mirror)
http://docs-asia.electrocomponents.com/webdocs/14a3/0900766b814a341b.pdf