Difference between revisions of "SW2-303"

From PS3 Developer wiki
Jump to: navigation, search
m (Pinout)
(Pinout)
 
(23 intermediate revisions by 5 users not shown)
Line 1: Line 1:
 
== SW2-303 (SysCon) ==
 
== SW2-303 (SysCon) ==
First to be seen on PS3 Slim [[CECH-25xx]] with motherboards: [[JSD-00x]]/[[JTP-00x]]
+
<div style="float:right">[[File:Syscon SW2-303.jpg|thumb|Photo of a Syscon 'SW2-303' (QFP Packaging)]]<br /><br />[[File:Fp128b_pin_arrangement.png|thumb|QFP Package : 128 pins<br />''pin 1 left bottom at mark, counter clockwise from south (pins 1-38) to east (pins 39-64), north (pins 65-102), west (103-128))'']] <br /> <br />[[File:Syscon SW2-303 Unsoldered.JPG|thumb]]</div>
  
<div style="float:right">[[File:Syscon SW2-303.jpg|thumb|Photo of a Syscon 'SW2-303' (QFP Packaging)]]<br /><br />[[File:Fp128b_pin_arrangement.png|thumb|QFP Package : 128 pins<br />''pin 1 left bottom at mark, counter clockwise from south (pins 1-38) to east (pins 39-64), north (pins 65-102), west (103-128))'']] <br /> <br />[[File:Syscon SW2-303 Unsoldered.JPG|thumb]]</div>
+
*Used on:
 +
**PS3 Slim [[CECH-25xx]] with motherboard: [[JSD-001]] or [[JTP-001]]
 +
**PS3 Slim [[CECH-30xx]] with motherboard: [[KTE-001]]
 +
 
 +
*True Name: uPD78F11BB
  
 
=== Pinout ===
 
=== Pinout ===
Line 8: Line 12:
 
! Pin # !! Name !! Port !! Description !! STBY Voltages
 
! Pin # !! Name !! Port !! Description !! STBY Voltages
 
|-
 
|-
| 1 || || || Connected to pin27 @Panasonic [[MN8647091]] || 0
+
| 1 || P142/SCK20/SCL20  || || Connected to pin27 @Panasonic [[MN8647091]] || 0
 
|-
 
|-
| 2 || P141 || || Connected to pinD1@SB through the resistor. ~1V @ standby (0 V?) || 0
+
| 2 || SB_INT || || SB_INT/SYSCSINT, Connected to pinD1@SB through the resistor. ~1V @ standby (0 V?) || 0
 
|-
 
|-
| 3 || P140 || || pinBA17@BE connected through the NPN transistor. 3V @ standby (3.15V) || 3.15
+
| 3 || BE_INT || || BE_INT/ATTENTION, pinBA17@BE connected through the NPN transistor. 3V @ standby (3.15V) || 3.15
 
|-
 
|-
 
| 4 || || || To +12V_MAIN through the resistor and divider || 0
 
| 4 || || || To +12V_MAIN through the resistor and divider || 0
 
|-
 
|-
| 5 || P37/POW_LED || || Connected to dual led(Green) on switchboard through the dual digital NPN trans. EMH1(SOT-563) || 0
+
| 5 || P37/POW_LED || || Connected to dual led(Green) on [[switch boards | switch board]] through the dual digital NPN trans. EMH1(SOT-563) || 0
 
|-
 
|-
| 6 || P36/STBY_LED || || Connected to dual led(Red) on switchboard through the dual digital NPN trans. EMH1(SOT-563). 3v @ standby (3.3V) || 3.3
+
| 6 || P36/STBY_LED || || Connected to dual led(Red) on [[switch boards | switch board]] through the dual digital NPN trans. EMH1(SOT-563) || 3v @ standby (3.3V)
 
|-
 
|-
| 7 || || || || 0
+
| 7 || || || Connected to pinAA18@SB || 0
 
|-
 
|-
| 8 || || || || 0
+
| 8 || || || Connected to pinAA17@SB || 0
 
|-
 
|-
| 9 || || || || 0
+
| 9 || || || CELL BE related? || 0
 
|-
 
|-
 
| 10 || || || || 0
 
| 10 || || || || 0
 
|-
 
|-
| 11 || P106 || || Connected to Backlit LEDs @SWITCH Board || 0
+
| 11 || P106 || || Connected to Backlit LEDs on [[switch boards | switch board]] || 0
 
|-
 
|-
| 12 || P105 || || Connected to CONTOUR LEDs @SWITCH Board || 0
+
| 12 || P105 || || Connected to CONTOUR LEDs on [[switch boards | switch board]] || 0
 
|-
 
|-
| 13 || P104 || || <!--Connected to Pogo pin @SWITCH Board, seems its a service pin.--> || 0
+
| 13 || P104 || || Absent element between this line and GND. Nothing else.  || 0
 
|-
 
|-
 
| 14 || || || || 0
 
| 14 || || || || 0
 
|-
 
|-
| 15 || || || || 0
+
| 15 || INTP?? || || || 0
 
|-
 
|-
 
| 16 || BUZZER || || || 0
 
| 16 || BUZZER || || || 0
 
|-
 
|-
| 17 || || || || 0
+
| 17 || P45/SO01  || || || 0
 
|-
 
|-
| 18 || P44 || || 3v @ standby || 3.0
+
| 18 || P44/SI01  || || 3v @ standby || 3.0
 
|-
 
|-
| 19 || || || || 0
+
| 19 || P43/SCK01  || || || 0
 
|-
 
|-
 
| 20 || || || || 0
 
| 20 || || || || 0
 
|-
 
|-
| 21 || P41 || || 3v @ standby || 3.0
+
| 21 || TOOL1 || || 3v @ standby || 3.0
 
|-
 
|-
 
| 22 || TOOL0/Debugger Pin? || || (Connected to Pin 7 @ Service Connector) (0V?) || 0
 
| 22 || TOOL0/Debugger Pin? || || (Connected to Pin 7 @ Service Connector) (0V?) || 0
 
|-
 
|-
| 23 || || || || 0
+
| 23 || P127/SO21  || || || 0
 
|-
 
|-
| 24 || P126/THR_I2C_SDA || || Connected to pin 7 of CELL/RSX temperature monitor IC's (SMbus I2C shared data line) || 3v @ standby (3.15)
+
| 24 || P126/THR_I2C_SDA || || Connected to pin 7 of CELL/RSX [[Thermal | temperature monitor IC's]] (SMbus I2C shared data line) || 3v @ standby (3.15)
 
|-
 
|-
| 25 || P125/THR_I2C_SCL || || Connected to pin 8 of CELL/RSX temperature monitor IC's (SMbus I2C shared clock line) || 3v @ standby (3.15)
+
| 25 || P125/THR_I2C_SCL || || Connected to pin 8 of CELL/RSX [[Thermal | temperature monitor IC's]] (SMbus I2C shared clock line) || 3v @ standby (3.15)
 
|-
 
|-
 
| 26 || RESET? || || Connected to standby voltage regulator [[Talk:Regulators | 463A]], pin 3 ||  
 
| 26 || RESET? || || Connected to standby voltage regulator [[Talk:Regulators | 463A]], pin 3 ||  
 
|-
 
|-
| 27 || P124 || || CLK -> 1-2V Amplitude (32.768Khz?) ||  
+
| 27 || P124 || || Connected to the big black external oscilator 1 next to syscon. CLK -> 1-2V Amplitude (32.768Khz?) ||  
 
|-
 
|-
| 28 || P123 || || CLK -> 1-2V Amplitude (32.768Khz?)  ||  
+
| 28 || P123 || || Connected to the big black external oscilator 1 next to syscon. CLK -> 1-2V Amplitude (32.768Khz?)  ||  
 
|-
 
|-
 
| 29 || P137/FLMD0 || || 3.3v @ standby (Connected to pin 8 at Service Connector through the resistor)  || 3.33
 
| 29 || P137/FLMD0 || || 3.3v @ standby (Connected to pin 8 at Service Connector through the resistor)  || 3.33
 
|-
 
|-
| 30 || P122 || || 0.8v @ standby <!-- oscillator --> || 1.1
+
| 30 || P122 || || Connected to a small external oscilator 2 ? || 0.8v @ standby (1.1)
 
|-
 
|-
| 31 || P121 || || 2.2v @ standby <!-- oscillator -->  || 2.4
+
| 31 || P121 || || Connected to a small external oscilator 2 ? || 2.2v @ standby (2.4)
 
|-
 
|-
 
| 32 || REGC || || ||  
 
| 32 || REGC || || ||  
Line 90: Line 94:
 
| 41 || P31/AC IN? || || 3v @ standby (3.3) || 3.3
 
| 41 || P31/AC IN? || || 3v @ standby (3.3) || 3.3
 
|-
 
|-
| 42 || || || || 0
+
| 42 || || || Connected (indirectly) to voltage regulator [[Talk:Regulators | BD9684 0906]],  pin 4 || 0
 
|-
 
|-
 
| 43 || P65 || || 3v @ standby  || 3.0
 
| 43 || P65 || || 3v @ standby  || 3.0
Line 98: Line 102:
 
| 45 || || || || 0
 
| 45 || || || || 0
 
|-
 
|-
| 46 || || || || 0
+
| 46 || INTP?? || || || 0
 
|-
 
|-
 
| 47 || P76 || || 3v @ standby (3.15) || 3.15
 
| 47 || P76 || || 3v @ standby (3.15) || 3.15
Line 104: Line 108:
 
| 48 || P75 || || 3v @ standby (3.15) || 3.15
 
| 48 || P75 || || 3v @ standby (3.15) || 3.15
 
|-
 
|-
| 49 || || || || 0
+
| 49 || INTP?? || || || 0
 
|-
 
|-
 
| 50 || P73 || || Connected to voltage regulator [[Talk:Regulators | D35653 0S25]],  pin 5 (And connected to pin 3 @ Service Connector) || 0
 
| 50 || P73 || || Connected to voltage regulator [[Talk:Regulators | D35653 0S25]],  pin 5 (And connected to pin 3 @ Service Connector) || 0
Line 138: Line 142:
 
| 65 || || || || 0
 
| 65 || || || || 0
 
|-
 
|-
| 66 || || || || 0
+
| 66 || INTP?? || || || 0
 
|-
 
|-
 
| 67 || || || || 0
 
| 67 || || || || 0
Line 166: Line 170:
 
| 79 || SC_TxD(TxD3/TxD2/P13) || || 3v @ standby (3.3) || 3.3
 
| 79 || SC_TxD(TxD3/TxD2/P13) || || 3v @ standby (3.3) || 3.3
 
|-
 
|-
| 80 || || || || 0
+
| 80 || P12/EX26/SO00/TxD0 || || SO from Cell Slave to Syscon Master || 0
 
|-
 
|-
| 81 || P11 || || 1v @ standby || 0
+
| 81 || P11 P11/EX25/SI00/RxD0  || || SI from Syscon Master to Cell Slave || 1.2
 
|-
 
|-
| 82 || || || || 0
+
| 82 || P10/EX24/SCK00 || || Serial Clock || 0
 
|-
 
|-
| 83 || P90 || || 2v @ standby || 0
+
| 83 || P90 || || Chip Select || 2.0
 
|-
 
|-
 
| 84 || P91 || || 3v @ standby || 3.0
 
| 84 || P91 || || 3v @ standby || 3.0
Line 182: Line 186:
 
| 87 || || || || 0
 
| 87 || || || || 0
 
|-
 
|-
| 88 || || || || 0
+
| 88 || P95/SCK11/SCL11 || || || 0
 
|-
 
|-
| 89 || || || || 0
+
| 89 || /SI11/SDA11 || || || 0
 
|-
 
|-
| 90 || || || || 0
+
| 90 || P97/SO11 || || || 0
 
|-
 
|-
 
| 91 || || || || 0
 
| 91 || || || || 0
 
|-
 
|-
| 92 || || || || 0
+
| 92 || || || Connected to voltage regulator [[Talk:Regulators | BD3527 (near FLASH)]],  pin 12 || 0
 
|-
 
|-
 
| 93 || || || || 0
 
| 93 || || || || 0
Line 196: Line 200:
 
| 94 || || || || 0
 
| 94 || || || || 0
 
|-
 
|-
| 95 || || || Connected to voltage regulator [[Talk:Regulators | BD3527]],  pin 12 || 0
+
| 95 || || || Connected to voltage regulator [[Talk:Regulators | BD3527 (near USB)]],  pin 12 || 0
 
|-
 
|-
 
| 96 || || || || 0
 
| 96 || || || || 0
Line 226: Line 230:
 
| 109 || P150 || || 3v @ standby  || 3.0
 
| 109 || P150 || || 3v @ standby  || 3.0
 
|-
 
|-
| 110 || P27/POW_SW || || 3v @ standby (3.3) || 3.3
+
| 110 || P27/POW_SW_DET || || Power switch detect. Connected to [[switch boards | switch board]] || 3v @ standby (3.3) 3.3
 
|-
 
|-
| 111 || P26/EJECT_SW || || 3v @ standby (3.3) || 3.3
+
| 111 || P26/EJECT_SW_DET || || Eject switch detect. Connected to [[switch boards | switch board]] || 3v @ standby (3.3) 3.3
 
|-
 
|-
 
| 112 || || || || 0
 
| 112 || || || || 0
Line 248: Line 252:
 
| 120 || || || || 0
 
| 120 || || || || 0
 
|-
 
|-
| 121 || || || || 0
+
| 121 || P04/SCK10/SCL10 || || || 0
 
|-
 
|-
| 122 || || || || 0
+
| 122 || SI10/RxD1/SDA10 || || || 0
 
|-
 
|-
| 123 || || || || 0
+
| 123 || P02/SO10/TxD1  || || || 0
 
|-
 
|-
 
| 124 || || || Connected to pin93 @Panasonic [[MN8647091]] || 0
 
| 124 || || || Connected to pin93 @Panasonic [[MN8647091]] || 0
Line 260: Line 264:
 
| 126 || P145/FAN_PWM || || PWM Control for the Fan. || 0
 
| 126 || P145/FAN_PWM || || PWM Control for the Fan. || 0
 
|-
 
|-
| 127 || || || || 0
+
| 127 || P144/SO20/TxD2  || || || 0
 
|-
 
|-
| 128 || || || Connected to pin29 @Panasonic [[MN8647091]] || 0
+
| 128 || /SI20/RxD2/SDA20  || || Connected to pin29 @Panasonic [[MN8647091]] || 0
 
|}
 
|}
 
{{Wikify}}
 
{{Wikify}}

Latest revision as of 12:39, 3 February 2020

SW2-303 (SysCon)[edit]

Photo of a Syscon 'SW2-303' (QFP Packaging)


QFP Package : 128 pins
pin 1 left bottom at mark, counter clockwise from south (pins 1-38) to east (pins 39-64), north (pins 65-102), west (103-128))


Syscon SW2-303 Unsoldered.JPG
  • True Name: uPD78F11BB

Pinout[edit]

Pin # Name Port Description STBY Voltages
1 P142/SCK20/SCL20 Connected to pin27 @Panasonic MN8647091 0
2 SB_INT SB_INT/SYSCSINT, Connected to pinD1@SB through the resistor. ~1V @ standby (0 V?) 0
3 BE_INT BE_INT/ATTENTION, pinBA17@BE connected through the NPN transistor. 3V @ standby (3.15V) 3.15
4 To +12V_MAIN through the resistor and divider 0
5 P37/POW_LED Connected to dual led(Green) on switch board through the dual digital NPN trans. EMH1(SOT-563) 0
6 P36/STBY_LED Connected to dual led(Red) on switch board through the dual digital NPN trans. EMH1(SOT-563) 3v @ standby (3.3V)
7 Connected to pinAA18@SB 0
8 Connected to pinAA17@SB 0
9 CELL BE related? 0
10 0
11 P106 Connected to Backlit LEDs on switch board 0
12 P105 Connected to CONTOUR LEDs on switch board 0
13 P104 Absent element between this line and GND. Nothing else. 0
14 0
15 INTP?? 0
16 BUZZER 0
17 P45/SO01 0
18 P44/SI01 3v @ standby 3.0
19 P43/SCK01 0
20 0
21 TOOL1 3v @ standby 3.0
22 TOOL0/Debugger Pin? (Connected to Pin 7 @ Service Connector) (0V?) 0
23 P127/SO21 0
24 P126/THR_I2C_SDA Connected to pin 7 of CELL/RSX temperature monitor IC's (SMbus I2C shared data line) 3v @ standby (3.15)
25 P125/THR_I2C_SCL Connected to pin 8 of CELL/RSX temperature monitor IC's (SMbus I2C shared clock line) 3v @ standby (3.15)
26 RESET? Connected to standby voltage regulator 463A, pin 3
27 P124 Connected to the big black external oscilator 1 next to syscon. CLK -> 1-2V Amplitude (32.768Khz?)
28 P123 Connected to the big black external oscilator 1 next to syscon. CLK -> 1-2V Amplitude (32.768Khz?)
29 P137/FLMD0 3.3v @ standby (Connected to pin 8 at Service Connector through the resistor) 3.33
30 P122 Connected to a small external oscilator 2 ? 0.8v @ standby (1.1)
31 P121 Connected to a small external oscilator 2 ? 2.2v @ standby (2.4)
32 REGC
33 GROUND/Vss0 0
34 GROUND/EVss0 0
35 Vdd Connected to voltage regulator 463A, pin 2 (3.3_EVER_B) 3v @ standby (3.3)
36 EVdd0 Connected to voltage regulator 463A, pin 2 (3.3_EVER_B) 3v @ standby (3.3)
37 P60 0.2v @ standby 0
38 P61 0.2v @ standby 0
39 0
40 0
41 P31/AC IN? 3v @ standby (3.3) 3.3
42 Connected (indirectly) to voltage regulator BD9684 0906, pin 4 0
43 P65 3v @ standby 3.0
44 0
45 0
46 INTP?? 0
47 P76 3v @ standby (3.15) 3.15
48 P75 3v @ standby (3.15) 3.15
49 INTP?? 0
50 P73 Connected to voltage regulator D35653 0S25, pin 5 (And connected to pin 3 @ Service Connector) 0
51 0
52 Connected to voltage regulator BD3525, pin 12 0
53 0
54 0
55 0
56 GROUND/EVss1 0
57 EVdd1 Connected to voltage regulator 463A, pin 2 (3.3_EVER_B) 3v @ standby (3.3)
58 0
59 0
60 0
61 0
62 0
63 0
64 0
65 0
66 INTP?? 0
67 0
68 0
69 0
70 0
71 0
72 0
73 0
74 0
75 Connected to voltage regulator Mitsumi 040 810X, pin 5 0
76 P16 3v @ standby (3.15) 3.15
77 P15 3v @ standby (3.3) 3.3
78 SC_RxD(RxD3/RxD2/P14) 0
79 SC_TxD(TxD3/TxD2/P13) 3v @ standby (3.3) 3.3
80 P12/EX26/SO00/TxD0 SO from Cell Slave to Syscon Master 0
81 P11 P11/EX25/SI00/RxD0 SI from Syscon Master to Cell Slave 1.2
82 P10/EX24/SCK00 Serial Clock 0
83 P90 Chip Select 2.0
84 P91 3v @ standby 3.0
85 0
86 0
87 0
88 P95/SCK11/SCL11 0
89 /SI11/SDA11 0
90 P97/SO11 0
91 0
92 Connected to voltage regulator BD3527 (near FLASH), pin 12 0
93 0
94 0
95 Connected to voltage regulator BD3527 (near USB), pin 12 0
96 0
97 P101 Connected to voltage regulator 463A, pin 2 (3.3_EVER_B) 3v @ standby (3.3)
98 0
99 0
100 P146 Connected to voltage regulator 463A, pin 2 (3.3_EVER_B) 3v @ standby (3.3)
101 GROUND 0
102 0
103 0
104 0
105 0
106 0
107 0
108 0
109 P150 3v @ standby 3.0
110 P27/POW_SW_DET Power switch detect. Connected to switch board 3v @ standby (3.3) 3.3
111 P26/EJECT_SW_DET Eject switch detect. Connected to switch board 3v @ standby (3.3) 3.3
112 0
113 0
114 0
115 0
116 0
117 P20 (0V?) 0
118 P130/ACDC_STBY 0
119 P102 Connected to standby voltage regulator 348A, pins 2 and 7
120 0
121 P04/SCK10/SCL10 0
122 SI10/RxD1/SDA10 0
123 P02/SO10/TxD1 0
124 Connected to pin93 @Panasonic MN8647091 0
125 0
126 P145/FAN_PWM PWM Control for the Fan. 0
127 P144/SO20/TxD2 0
128 /SI20/RxD2/SDA20 Connected to pin29 @Panasonic MN8647091 0