Difference between revisions of "SW2-303"

From PS3 Developer wiki
Jump to: navigation, search
m (Pinout)
m (temporal fix)
 
(4 intermediate revisions by 2 users not shown)
Line 6: Line 6:
  
 
*True Name: uPD78F11BB
 
*True Name: uPD78F11BB
 +
* Uses 3.3v SPI to communicate with the Cell (pins 80-83)
  
 
=== Pinout ===
 
=== Pinout ===
{|class="wikitable"
+
{{Template:Syscon Pinout LQFP 128 pins‎}}
! Pin # !! Name !! Port !! Description !! STBY Voltages
 
|-
 
| 1 || P142/SCK20/SCL20  || || Connected to pin27 @Panasonic [[MN8647091]] || 0
 
|-
 
| 2 || SB_INT || || SB_INT/SYSCSINT, Connected to pinD1@SB through the resistor. ~1V @ standby (0 V?) || 0
 
|-
 
| 3 || BE_INT || || BE_INT/ATTENTION, pinBA17@BE connected through the NPN transistor. 3V @ standby (3.15V) || 3.15
 
|-
 
| 4 || || || To +12V_MAIN through the resistor and divider || 0
 
|-
 
| 5 || P37/POW_LED || || Connected to dual led(Green) on [[switch boards | switch board]] through the dual digital NPN trans. EMH1(SOT-563) || 0
 
|-
 
| 6 || P36/STBY_LED || || Connected to dual led(Red) on [[switch boards | switch board]] through the dual digital NPN trans. EMH1(SOT-563) || 3v @ standby (3.3V)
 
|-
 
| 7 || || || Connected to pinAA18@SB || 0
 
|-
 
| 8 || || || Connected to pinAA17@SB || 0
 
|-
 
| 9 || || || CELL BE related? || 0
 
|-
 
| 10 || || || || 0
 
|-
 
| 11 || P106 || || Connected to Backlit LEDs on [[switch boards | switch board]] || 0
 
|-
 
| 12 || P105 || || Connected to CONTOUR LEDs on [[switch boards | switch board]] || 0
 
|-
 
| 13 || P104 || || Absent element between this line and GND. Nothing else.  || 0
 
|-
 
| 14 || || || || 0
 
|-
 
| 15 || INTP?? || || || 0
 
|-
 
| 16 || BUZZER || || || 0
 
|-
 
| 17 || P45/SO01  || || || 0
 
|-
 
| 18 || P44/SI01  || || 3v @ standby || 3.0
 
|-
 
| 19 || P43/SCK01  || || || 0
 
|-
 
| 20 || || || || 0
 
|-
 
| 21 || TOOL1 || || 3v @ standby || 3.0
 
|-
 
| 22 || TOOL0/Debugger Pin? || || Connected to Pin 7 @ Service Connector through a missing SMD component resistor/diode || 0
 
|-
 
| 23 || P127/SO21  || || || 0
 
|-
 
| 24 || P126/THR_I2C_SDA || || Connected to pin 7 of CELL/RSX [[Thermal | temperature monitor IC's]] (SMbus I2C shared data line) || 3v @ standby (3.15)
 
|-
 
| 25 || P125/THR_I2C_SCL || || Connected to pin 8 of CELL/RSX [[Thermal | temperature monitor IC's]] (SMbus I2C shared clock line) || 3v @ standby (3.15)
 
|-
 
| 26 || RESET? || || Connected to Pin 9 @ Service Connector through a missing SMD component resistor/diode. And to standby voltage regulator [[Talk:Regulators | 463A]], pin 3 ||
 
|-
 
| 27 || P124 || || Connected to the big black external oscilator 1 next to syscon. CLK -> 1-2V Amplitude (32.768Khz?) ||
 
|-
 
| 28 || P123 || || Connected to the big black external oscilator 1 next to syscon. CLK -> 1-2V Amplitude (32.768Khz?)  ||
 
|-
 
| 29 || P137/FLMD0 || || Connected to pin 8 @ Service Connector through a missing SMD component resistor/diode || 3.33
 
|-
 
| 30 || P122 || || Connected to a small external oscilator 2 ? || 0.8v @ standby (1.1)
 
|-
 
| 31 || P121 || || Connected to a small external oscilator 2 ? || 2.2v @ standby (2.4)
 
|-
 
| 32 || REGC || || ||
 
|-
 
| 33 || GROUND/Vss0 || || || 0
 
|-
 
| 34 || GROUND/EVss0 || || || 0
 
|-
 
| 35 || Vdd || || Connected to voltage regulator [[Talk:Regulators | 463A]], pin 2 (3.3_EVER_B) || 3v @ standby (3.3)
 
|-
 
| 36 || EVdd0 || || Connected to voltage regulator [[Talk:Regulators | 463A]], pin 2 (3.3_EVER_B) || 3v @ standby (3.3)
 
|-
 
| 37 || P60 || || 0.2v @ standby || 0
 
|-
 
| 38 || P61 || || 0.2v @ standby || 0
 
|-
 
| 39 || || ||  || 0
 
|-
 
| 40 || || || || 0
 
|-
 
| 41 || P31/AC IN? || || 3v @ standby (3.3) || 3.3
 
|-
 
| 42 || || || Connected (indirectly) to voltage regulator [[Talk:Regulators | BD9684 0906]],  pin 4 || 0
 
|-
 
| 43 || P65 || || 3v @ standby  || 3.0
 
|-
 
| 44 || || || || 0
 
|-
 
| 45 || || || || 0
 
|-
 
| 46 || INTP?? || || || 0
 
|-
 
| 47 || P76 || || 3v @ standby (3.15) || 3.15
 
|-
 
| 48 || P75 || || 3v @ standby (3.15) || 3.15
 
|-
 
| 49 || INTP?? || || || 0
 
|-
 
| 50 || P73 || || Connected to pin 3 @ Service Connector. And to voltage regulator [[Talk:Regulators | D35653 0S25]] || 0
 
|-
 
| 51 || || || || 0
 
|-
 
| 52 || || || Connected to voltage regulator [[Talk:Regulators | BD3525]],  pin 12 || 0
 
|-
 
| 53 || || || || 0
 
|-
 
| 54 || || || || 0
 
|-
 
| 55 || || || || 0
 
|-
 
| 56 || GROUND/EVss1 || || || 0
 
|-
 
| 57 || EVdd1 || || Connected to voltage regulator [[Talk:Regulators | 463A]], pin 2 (3.3_EVER_B) || 3v @ standby (3.3)
 
|-
 
| 58 || || || || 0
 
|-
 
| 59 || || || || 0
 
|-
 
| 60 || || || || 0
 
|-
 
| 61 || || || || 0
 
|-
 
| 62 || || || || 0
 
|-
 
| 63 || || || || 0
 
|-
 
| 64 || || || || 0
 
|-
 
| 65 || || || || 0
 
|-
 
| 66 || INTP?? || || || 0
 
|-
 
| 67 || || || || 0
 
|-
 
| 68 || || || || 0
 
|-
 
| 69 || || || || 0
 
|-
 
| 70 || || || || 0
 
|-
 
| 71 || || || || 0
 
|-
 
| 72 || || || || 0
 
|-
 
| 73 || || || || 0
 
|-
 
| 74 || || || || 0
 
|-
 
| 75 || || || Connected to voltage regulator [[Talk:Regulators | Mitsumi 040 810X]],  pin 5 || 0
 
|-
 
| 76 || P16 || || 3v @ standby (3.15) || 3.15
 
|-
 
| 77 || P15 || || 3v @ standby (3.3) || 3.3
 
|-
 
| 78 || SC_RxD(RxD3/RxD2/P14) || || SC_RxD UART (terminal).Connected to pin 6 @ [[PCI]] Connector || 0
 
|-
 
| 79 || SC_TxD(TxD3/TxD2/P13) || || SC_TxD UART (terminal).Connected to pin 4 @ [[PCI]] Connector || 3.3
 
|-
 
| 80 || P12/EX26/SO00/TxD0 || || SO from Cell Slave to Syscon Master || 0
 
|-
 
| 81 || P11 P11/EX25/SI00/RxD0  || || SI from Syscon Master to Cell Slave || 1.2
 
|-
 
| 82 || P10/EX24/SCK00 || || Serial Clock || 0
 
|-
 
| 83 || P90 || || Chip Select || 2.0
 
|-
 
| 84 || P91 || || 3v @ standby || 3.0
 
|-
 
| 85 || || || || 0
 
|-
 
| 86 || || || || 0
 
|-
 
| 87 || || || || 0
 
|-
 
| 88 ||  P95/SCK11/SCL11 || || || 0
 
|-
 
| 89 || /SI11/SDA11 || || || 0
 
|-
 
| 90 ||  P97/SO11 || || || 0
 
|-
 
| 91 || || || || 0
 
|-
 
| 92 || || || Connected to voltage regulator [[Talk:Regulators | BD3527 (near FLASH)]],  pin 12 || 0
 
|-
 
| 93 || || || || 0
 
|-
 
| 94 || || || || 0
 
|-
 
| 95 || || || Connected to voltage regulator [[Talk:Regulators | BD3527 (near USB)]],  pin 12 || 0
 
|-
 
| 96 || || || || 0
 
|-
 
| 97 || P101 || || Connected to voltage regulator [[Talk:Regulators | 463A]], pin 2 (3.3_EVER_B) || 3v @ standby (3.3)
 
|-
 
| 98 || || || || 0
 
|-
 
| 99 || || || || 0
 
|-
 
| 100 || P146 || || Connected to voltage regulator [[Talk:Regulators | 463A]], pin 2 (3.3_EVER_B) || 3v @ standby (3.3)
 
|-
 
| 101 || GROUND || || || 0
 
|-
 
| 102 || || || || 0
 
|-
 
| 103 || || || || 0
 
|-
 
| 104 || || || || 0
 
|-
 
| 105 || || || || 0
 
|-
 
| 106 || || || || 0
 
|-
 
| 107 || || || || 0
 
|-
 
| 108 || || || || 0
 
|-
 
| 109 || P150 || || 3v @ standby  || 3.0
 
|-
 
| 110 || P27/POW_SW_DET || || Power switch detect. Connected to [[switch boards | switch board]] || 3v @ standby (3.3) 3.3
 
|-
 
| 111 || P26/EJECT_SW_DET || || Eject switch detect. Connected to [[switch boards | switch board]] || 3v @ standby (3.3) 3.3
 
|-
 
| 112 || || || || 0
 
|-
 
| 113 || || || || 0
 
|-
 
| 114 || || || || 0
 
|-
 
| 115 || || || || 0
 
|-
 
| 116 || || || || 0
 
|-
 
| 117 || P20 || || (0V?) || 0
 
|-
 
| 118 || P130/ACDC_STBY || || Connected to standby voltage regulator [[Talk:Regulators | 348A]], pins 2 and 7 EN_HDMI ? || 3v @ standby (3.3)
 
|-
 
| 119 || P102 || || || 3v @ standby (3.3)
 
|-
 
| 120 || || || || 0
 
|-
 
| 121 || P04/SCK10/SCL10 || || || 0
 
|-
 
| 122 || SI10/RxD1/SDA10 || || || 0
 
|-
 
| 123 || P02/SO10/TxD1  || || || 0
 
|-
 
| 124 || || || Connected to pin93 @Panasonic [[MN8647091]] || 0
 
|-
 
| 125 || || || || 0
 
|-
 
| 126 || P145/FAN_PWM || || PWM Control for the Fan. || 0
 
|-
 
| 127 ||  P144/SO20/TxD2  || || || 0
 
|-
 
| 128 || /SI20/RxD2/SDA20  || || Connected to pin29 @Panasonic [[MN8647091]] || 0
 
|}
 
 
{{Wikify}}
 
{{Wikify}}
  
  
 
{{Motherboard Components}}<noinclude>[[Category:Main]]</noinclude>
 
{{Motherboard Components}}<noinclude>[[Category:Main]]</noinclude>

Latest revision as of 14:27, 23 June 2021

SW2-303 (SysCon)[edit]

Photo of a Syscon 'SW2-303' (QFP Packaging)


QFP Package : 128 pins
pin 1 left bottom at mark, counter clockwise from south (pins 1-38) to east (pins 39-64), north (pins 65-102), west (103-128))


Syscon SW2-303 Unsoldered.JPG
  • True Name: uPD78F11BB
  • Uses 3.3v SPI to communicate with the Cell (pins 80-83)

Pinout[edit]

Pin # Name Type Description STBY Voltages
NEC/Renesas Sony/Custom
1 P142/SCK20/SCL20 ←I Connected to pin27 @Panasonic MN8647091 (HDMI controller CEC data channel related with pins 127 and 128 ?) 0
2 P141/PCLBUZ1/INTP7 SB_INT/SYSCSINT ←I Connected to pinD1@SB CXD9963GB through the resistor ~1V @ standby (0 V?)
3 P140/PCLBUZ0/INTP6 BE_INT/ATTENTION ←I Connected to pinBA17@BE through the NPN transistor (CELL switches the transistor to connect this pin to GND) 3V @ standby (3.15V)
4 P120/INTP0/EXLVI ←I/O→ To +12V_MAIN through the resistor and divider (EXLVI config = External potential input for low-voltage detector ?) 0
5 P37 POW_LED O→ Connected to dual led(Green) on Switch board through the dual digital NPN trans. EMH1(SOT-563) 0
6 P36 STBY_LED O→ Connected to dual led(Red) on Switch board through the dual digital NPN trans. EMH1(SOT-563) 3v @ standby (3.3V)
7 P35 ←I/O→ Connected to pinAA18@SB CXD9963GB 0
8 P34 ←I/O→ Connected to pinAA17@SB CXD9963GB 0
9 P33 ←I/O→ CELL BE related? 0
10 P32 ←I/O→ 0
11 P163/TI13/TO13 BACK_LEDS O→ Connected to Backlit LEDs on Switch board 0
12 P162/TI12/TO12 CONTOUR_LEDS O→ Connected to CONTOUR LEDs on Switch board 0
13 P161/TI11/TO11 NOT_CONNECTED - Disconnected to GND through a missing SMD component. See: NOWHERE 0
14 P160/TI10/TO10 NOT_CONNECTED - Disconnected to GND through a missing SMD component at the other side of the board. See: VIA 0
15 P47/INTP2 ←I/O→ Unknown purpose. The trace goes in the direction of the Wifi/BT module 0
16 P46/INTP1/TI05/TO05 BUZZER O→ Connected to the base of a transistor that drives a pin of the buzzer to GND 0
17 P45/SO01 ←I/O→ SB_SPI_DO @CXD9963GB ? 0
18 P44/SI01 ←I/O→ SB_SPI_DI @CXD9963GB ? 3v @ standby
19 P43/SCK01 ←I/O→ SB_SPI_CLK @CXD9963GB ? 0
20 P42/TI04/TO04 ←I/O→ SB_SPI_CS @CXD9963GB ? 0
21 P41/TOOL1 TOOL_CLK ←I/O→ Tool clock. Connected to Pin 13 @ Service Connector 3rd Gen. through a missing SMD component resistor/diode 3.0
22 P40/TOOL0 TOOL_DAT ←I/O→ Tool Data. Connected to Pin 7 @ Service Connector 3rd Gen. through a missing SMD component resistor/diode 0
23 P127/SO21 ←I/O→ 0
24 P126/SI21/SDA21 THR_I2C_SDA ←I/O→ SMBus data. Connected to pin 7 of CELL/RSX temperature monitors TMP411A/B 3v @ standby (3.15)
25 P125/SCK21/SCL21 THR_I2C_SCL O→ SMBus clock. Connected to pin 8 of CELL/RSX temperature monitors TMP411A/B 3v @ standby (3.15)
26 RESET RESET ←I Connected to Pin 9 @ Service Connector 3rd Gen. through a missing SMD component resistor/diode. And to standby voltage regulator 463A, pin 3
27 P124/XT2 XT_SUB ←I Subsystem clock. Connected to a big black crystal. CLK -> 1-2V Amplitude (32.768Khz?)
28 P123/XT1 XT_SUB ←I Subsystem clock. Connected to a big black crystal. CLK -> 1-2V Amplitude (32.768Khz?)
29 FLMD0 FLASH_MODE - Flash programming mode. Connected to pin 8 @ Service Connector 3rd Gen. through a missing SMD component resistor/diode 3.33
30 P122/X2/EXCLK XT_MAIN ←I Main system clock. Connected to a tiny metallic crystal marked "EX" 0.8v @ standby (1.1)
31 P121/X1 XT_MAIN ←I Main system clock. Connected to a tiny metallic crystal marked "EX" 2.2v @ standby (2.4)
32 REGC VREG_CAP - Capacitor for the internal voltage regulator. Connected to ground through a capacitor (around 1uF) at the other side of the board. See: VIA. And 2 diodes to battery+
33 VSS0 GND - 0
34 EVSS0 GND - 0
35 VDD 3.3_EVER_B - Connected to standby voltage regulator 463A, pin 2 3v @ standby (3.3)
36 EVDD0 3.3_EVER_B - Connected to standby voltage regulator 463A, pin 2 3v @ standby (3.3)
37 P60/SCL0 ←I/O→ 0.2v @ standby
38 P61/SDA0 ←I/O→ 0.2v @ standby
39 P62 ←I/O→ 0
40 P63 ←I/O→ 0
41 P31/TI03/TO03/INTP4 ACIN_DET ←I Connected to pin 4 of the PSU control connector. See: CECH-25xx/SW2/SwitchBoard/PSU schematic 3v @ standby (3.3)
42 P64/RD ←I/O→ Connected (indirectly) to voltage regulator BD9684 0906, pin 4 (enable something) 0
43 P65/WR0 ←I/O→ Connected to Pin 12 @ Service Connector 3rd Gen. through a missing SMD component resistor/diode 3.0
44 P66/WR1 ←I/O→ 0
45 P67/ASTB NOT_CONNECTED - 0
46 P77/EX23/KR7/INTP11 ←I/O→ 0
47 P76/EX22/KR6/INTP10 ←I/O→ 3v @ standby (3.15)
48 P75/EX21/KR5/INTP9 ←I/O→ 3v @ standby (3.15)
49 P74/EX20/KR4/INTP8 ←I/O→ 0
50 P73/EX19/KR3 ←I/O→ Connected to pin 3 @ Service Connector 3rd Gen.. And to voltage regulator D35653 0S25 (FLASH_ENABLE ?) 0
51 P72/EX18/KR2 ←I/O→ 0
52 P71/EX17/KR1 ←I/O→ Connected to voltage regulator BD3525, pin 12 (enable something) 0
53 P70/EX16/KR0 ←I/O→ 0
54 P06/WAIT ←I/O→ 0
55 P05/CLKOUT ←I/O→ 0
56 EVSS1 GND - 0
57 EVDD1 3.3_EVER_B - Connected to standby voltage regulator 463A, pin 2 3v @ standby (3.3)
58 P80/EX0 ←I/O→ 0
59 P81/EX1 ←I/O→ 0
60 P82/EX2 ←I/O→ 0
61 P83/EX3 ←I/O→ 0
62 P84/EX4 ←I/O→ 0
63 P85/EX5 ←I/O→ 0
64 P86/EX6 ←I/O→ 0
65 P87/EX7 ←I/O→ 0
66 P30/INTP3/RTC1HZ ←I/O→ 0
67 P50/EX8 ←I/O→ 0
68 P51/EX9 ←I/O→ 0
69 P52/EX10 ←I/O→ 0
70 P53/EX11 ←I/O→ 0
71 P54/EX12 ←I/O→ 0
72 P55/EX13 ←I/O→ 0
73 P56/EX14 ←I/O→ 0
74 P57/EX15 ←I/O→ 0
75 P17/EX31/TI02/TO02 ←I/O→ Connected to voltage regulator Mitsumi 040 810X, pin 5 0
76 P16/EX30/TI01/TO01/INTP5 ←I/O→ 3v @ standby (3.15)
77 P15/EX29/RTCDIV/RTCCL ←I/O→ 3v @ standby (3.3)
78 P14/EX28/RxD3 SC_RxD ←I SC_RxD UART (terminal).Connected to Pin 11 @ Service Connector 3rd Gen. through a missing SMD component resistor/diode, and to pin 6 @ PCI Connector 0
79 P13/EX27/TxD3 SC_TxD O→ SC_TxD UART (terminal).Connected to Pin 10 @ Service Connector 3rd Gen. through a missing SMD component resistor/diode, and to pin 4 @ PCI Connector 3.3
80 P12/EX26/SO00/TxD0 BE_SPI_DO O→ SO from Cell Slave to Syscon Master 0
81 P11/EX25/SI00/RxD0 BE_SPI_DI ←I SI from Syscon Master to Cell Slave 1.2
82 P10/EX24/SCK00 BE_SPI_CLK ? ←I/O→ Serial Clock 0
83 P90/EX32 BE_SPI_CS ? ←I/O→ Chip Select 2.0
84 P91/EX33 ←I/O→ 3v @ standby
85 P92/EX34 ←I/O→ 0
86 P93/EX35 ←I/O→ 0
87 P94 ←I/O→ RSX_SPI_CS ? See: Template:RSX pad layout 41x41 and pad AW8@ 0
88 P95/SCK11/SCL11 ←I/O→ RSX_SPI_CLK ? See: Template:RSX pad layout 41x41 and pad AY8@ 0
89 P96/SI11/SDA11 ←I/O→ RSX_SPI_DI ? See: Template:RSX pad layout 41x41 and pad BA7@ 0
90 P97/SO11 ←I/O→ RSX_SPI_DO ? See: Template:RSX pad layout 41x41 and pad BA6@ 0
91 P112 ←I/O→ 0
92 P113 ←I/O→ Connected to voltage regulator BD3527 (near FLASH), pin 12 0
93 P114 ←I/O→ 0
94 P115 ←I/O→ 0
95 P116 ←I/O→ Connected to voltage regulator BD3527 (near USB), pin 12 0
96 P117 ←I/O→ 0
97 AVREF1 3.3_EVER_B - Connected to standby voltage regulator 463A, pin 2 3v @ standby (3.3)
98 P110/ANO0 NOT_CONNECTED - 0
99 P111/ANO1 NOT_CONNECTED - 0
100 AVREF0 3.3_EVER_B - Connected to standby voltage regulator 463A, pin 2 3v @ standby (3.3)
101 AVSS0 GND - 0
102 P157/ANI15 ANI15_DOWN ←I 100k resistor to GND. And to a missing SMD component to VIA to pin 8 of voltage regulator 463A (3.3_EVER_A) 0
103 P156/ANI14 ANI14_UP ←I VIA to 100k resistor to pin 8 of voltage regulator 463A (3.3_EVER_A) 0
104 P155/ANI13 ANI13_DOWN ←I VIA to 100k resistor to GND 0
105 P154/ANI12 NOT_CONNECTED - 0
106 P153/ANI11 NOT_CONNECTED - 0
107 P152/ANI10 NOT_CONNECTED - 0
108 P151/ANI9 NOT_CONNECTED - 0
109 P150/ANI8 ANI8_UP_UNK ←I Connected to an unknown track. And to 10k resistor to VIA to pin 8 of voltage regulator 463A (3.3_EVER_A) 3v @ standby
110 P27/ANI7 POW_SW_DET ←I Power switch detect. Connected to Switch board 3v @ standby (3.3) 3.3
111 P26/ANI6 EJECT_SW_DET ←I Eject switch detect. Connected to Switch board 3v @ standby (3.3) 3.3
112 P25/ANI5 ←I/O→ Connected to Wifi/BT module, unknown pad 0
113 P24/ANI4 ←I/O→ Connected to Wifi/BT module, unknown pad 0
114 P23/ANI3 ←I/O→ 0
115 P22/ANI2 ←I/O→ 0
116 P21/ANI1 ←I/O→ 0
117 P20/ANI0 ←I/O→ (0V?)
118 P130 ACDC_STBY O→ Connected to pin 3 of the PSU control connector. See: CECH-25xx/SW2/SwitchBoard/PSU schematic 3v @ standby (3.3)
119 P131/TI06/TO06 ←I/O→ Connected to voltage regulator 348A, pins 2 and 7 (EN_HDMI & EN_AV together ?... in other words, enable video output) 3v @ standby (3.3)
120 P07 ←I/O→ 0
121 P04/SCK10/SCL10 ←I/O→ 0
122 P03/SI10/RxD1/SDA10 ←I/O→ 0
123 P02/SO10/TxD1 ←I/O→ 0
124 P01/TO00 ←I/O→ Connected to pin93 @Panasonic MN8647091 0
125 P00/TI00 ←I/O→ 0
126 P145/TI07/TO07 FAN_PWM O→ PWM Control for the Fan. 0
127 P144/SO20/TxD2 ←I/O→ (HDMI controller CEC data channel related with pins 1 and 128 ?) 0
128 P143/SI20/RxD2/SDA20 ←I/O→ Connected to pin29 @Panasonic MN8647091 (HDMI controller CEC data channel related with pins 1 and 127 ?) 0