BL2-001: Difference between revisions

From PS3 Developer wiki
Jump to navigation Jump to search
mNo edit summary
Line 3: Line 3:
This daughterboard is a part of the [[Bluray Drive]] model [[BD-400]] used in [[CECHAxx]], [[CECHBxx]], [[CECHCxx]], [[CECHExx]], [[CECHGxx]] PS3 models.
This daughterboard is a part of the [[Bluray Drive]] model [[BD-400]] used in [[CECHAxx]], [[CECHBxx]], [[CECHCxx]], [[CECHExx]], [[CECHGxx]] PS3 models.


There is an Infra red LED that lights on a phototransistor located on the opposite board. It works as a disc presence detector at the disc slot border, and controlls the load/eject mechanical parts at top of the drive.
There is an Infra red LED that lights on a phototransistor located on the opposite board. It works as a disc presence detector at the disc slot border, and controlls the load/eject mechanical parts at top of the drive. SYSCON feeds this IR-LED through the Pin M16(Mullion) and then checks the signal from photo-transistor on Pin A2(Mullion).


Retail Partnumber(s): 1-871-577-12
Retail Partnumber(s): 1-871-577-12

Revision as of 14:11, 7 March 2022

Description

This daughterboard is a part of the Bluray Drive model BD-400 used in CECHAxx, CECHBxx, CECHCxx, CECHExx, CECHGxx PS3 models.

There is an Infra red LED that lights on a phototransistor located on the opposite board. It works as a disc presence detector at the disc slot border, and controlls the load/eject mechanical parts at top of the drive. SYSCON feeds this IR-LED through the Pin M16(Mullion) and then checks the signal from photo-transistor on Pin A2(Mullion).

Retail Partnumber(s): 1-871-577-12

Gallery

ICs

  • IR LED (CL-200IR-X-TU)
  • Resistor (220 Ohms)

Connectors

long board edge:

  • 2-pin connector