Template:Toshiba T6UN6EFG Pinout
Jump to navigation
Jump to search
Pin # | Name | Port | Description |
---|---|---|---|
1 | GND | To ground | |
2 | V_STBY | 2.8V Standby. Power for Toshiba T6UN6EFG, EEPROM, , and LED's | |
3 | GND | To ground | |
4 | V_BATT | 2x Capacitor network to ground, and resistor to battery and Texas Instruments SN89062 pin 16 in VX4 boards | |
5 | V_STBY | 2.8V Standby. Power for Toshiba T6UN6EFG, EEPROM, , and LED's | |
6 | SENSOR_ACCL_X | To acccelerometer X axis through resistor | |
7 | SENSOR_ACCL_Y | To acccelerometer Y axis through resistor | |
8 | SENSOR_ACCL_Z | To acccelerometer Z axis through resistor | |
9 | SENSOR_GYRO | To gyroscope through resistor | |
10 | V_STBY | 2.8V Standby. Power for Toshiba T6UN6EFG, EEPROM, , and LED's | |
11 | SLAVES_RESET | Texas Instruments SN84001 pin 2, and ALPS 413A pin 5 through resistor network in VX4 boards | |
12 | GND | To ground | |
13 | BT_POWER_CTRL ? | Texas Instruments SN89062, pin 4 in VX4 boards | |
14 | BT_UART_1 ? | To BT module (ALPS 413A pin 8 in VX4 boards) through resistor | |
15 | BT_UART_2 ? | To BT module (ALPS 413A pin 6 in VX4 boards) through 4x resistor network | |
16 | BT_UART_3 ? | To BT module (ALPS 413A pin 9 in VX4 boards) through 4x resistor network | |
17 | BT_UART_4 ? | To BT module (ALPS 413A pin 7 in VX4 boards) | |
18 | BT_UNK_1 | To BT module (ALPS 413A pin 14 in VX4 boards) | |
19 | BT_UNK_2 | To BT module (ALPS 413A pin 28 in VX4 boards) | |
20 | GND | To ground | |
21 | V_STBY | 2.8V Standby. Power for Toshiba T6UN6EFG, EEPROM, , and LED's | |
22 | GND | To ground | |
23 | LED_1 | To led 1 cathode through 4x resistor network (RN3 in VX4 boards) | |
24 | LED_2 | To led 2 cathode through 4x resistor network (RN3 in VX4 boards) | |
25 | LED_3 | To led 3 cathode through 4x resistor network (RN3 in VX4 boards) | |
26 | LED_4 | To led 4 cathode through 4x resistor network (RN3 in VX4 boards) | |
27 | Not connected ? (for the PS button backlight led in prototypes ?) | ||
28 | MOTOR_SMALL | Small Motor + (rumble) | |
29 | MOTOR_BIG | Big Motor + (rumble) | |
30 | EEPROM_SPI_CLOCK | EEPROM, pin 6 in VX4 boards | |
31 | EEPROM_SELECT | EEPROM, pin 1 in VX4 boards | |
32 | GND | To ground | |
33 | V_STBY | 2.8V Standby. Power for Toshiba T6UN6EFG, EEPROM, , and LED's | |
34 | EEPROM_SPI_MOSI | EEPROM, pin 5 in VX4 boards | |
35 | EEPROM_SPI_MISO | EEPROM, pin 2 in VX4 boards | |
36 | STICKS_POWER_CTRL ? | Texas Instruments SN89062, pin 17 in VX4 boards | |
37 | LX_V ? | 4x Resistor network (RN8 in VX4 boards), and then 2x Capacitor network to ground (CN9 in VX4 boards), and to Texas Instruments SN84001 pin 21 in VX4 boards | |
38 | LY_V ? | 4x Resistor network (RN8 in VX4 boards), and then 2x Capacitor network to ground (CN9 in VX4 boards), and to Texas Instruments SN84001 pin 20 in VX4 boards | |
39 | RX_V ? | 4x Resistor network (RN8 in VX4 boards), and then 2x Capacitor network to ground (CN10 in VX4 boards), and to Texas Instruments SN84001 pin 19 in VX4 boards | |
40 | RY_V ? | 4x Resistor network (RN8 in VX4 boards), and then 2x Capacitor network to ground (CN10 in VX4 boards), and to Texas Instruments SN84001 pin 18 in VX4 boards | |
41 | BATT_CHARGE_SETPOINT | Texas Instruments SN89062, pin 21 in VX4 boards | |
42 | BATT_USB_POWER_GOOD ? | Texas Instruments SN89062, pin 5 in VX4 boards | |
43 | BATT_CHARGE_START ? | Texas Instruments SN89062, pin 2 in VX4 boards | |
44 | BATT_STATUS_1 ? | Texas Instruments SN89062, pin 10 in VX4 boards (and TP8 in VX4 boards) | |
45 | BATT_STATUS_2 ? | Texas Instruments SN89062, pin 12 in VX4 boards (and TP9 in VX4 boards) | |
46 | COM_3 | COM 3 (Common Line for Digital )) | |
47 | BUTTON_ANALOG_UP | ||
48 | BUTTON_ANALOG_RIGHT | ||
49 | BUTTON_ANALOG_DOWN | ||
50 | BUTTON_ANALOG_LEFT | ||
51 | V_STBY | 2.8V Standby. Power for Toshiba T6UN6EFG, EEPROM, , and LED's | |
52 | GND | To ground | |
53 | BUTTON_ANALOG_L2 | ||
54 | BUTTON_ANALOG_L1 | ||
55 | Not connected ? (connected to something in PP1 and PP4 boards) | ||
56 | BUTTON_ANALOG_R2 | ||
57 | BUTTON_ANALOG_R1 | ||
58 | BUTTON_ANALOG_TRIANGLE | ||
59 | BUTTON_ANALOG_CIRCLE | ||
60 | BUTTON_ANALOG_CROSS | ||
61 | BUTTON_ANALOG_SQUARE | ||
62 | Not connected ? (connected to something in PP1 and PP4 boards) | ||
63 | Not connected ? (connected to something in PP1 and PP4 boards) | ||
64 | BUTTON_DIGITAL_SELECT | ||
65 | BUTTON_DIGITAL_L3 | ||
66 | BUTTON_DIGITAL_R3 | ||
67 | BUTTON_DIGITAL_START | ||
68 | BUTTON_DIGITAL_PLAYSTATION | ||
69 | To a testpoint (TP23 in VX4 boards), and 8.45K resistor to pin 74 | ||
70 | GND | To ground. It seems these pins were repurposed at some point | |
71 | GND | ||
72 | GND | ||
73 | V_STBY | 2.8V Standby. Power for Toshiba T6UN6EFG, EEPROM, , and LED's | |
74 | 2x Capacitor network to ground, and NTC thermistor to standby power rail, and 8.45K resistor to pin 69 | ||
75 | COM_1 | 2x Capacitor network to ground, and to ribbon circuit board COM 1 pin (Common Line for Analog ) | |
76 | COM_2 | 2x Capacitor network to ground, and to ribbon circuit board COM 2 pin (Common Line for Analog ) | |
77 | LX | 2x Capacitor network to ground, and to Texas Instruments SN84001 pin 25 in VX4 boards | |
78 | LY | 2x Capacitor network to ground, and to Texas Instruments SN84001 pin 24 in VX4 boards | |
79 | RX | 2x Capacitor network to ground, and to Texas Instruments SN84001 pin 23 in VX4 boards | |
80 | RY | 2x Capacitor network to ground, and to Texas Instruments SN84001 pin 22 in VX4 boards |