Remarry Bluray Drive

From PS3 Developer wiki
Jump to navigation Jump to search

Remarry BluRay drive

Hardware is interlocked on the PS3, so exchanging a bluray drive from one unit to another requires remarriage of the components.

Procedure

  1. Put unrar'ed remarry files on a blank USB stick & add a 2.30 (PS3 FAT only) or 3.15 (PS3 Slim) PUP
  2. Put in the service mode JIG/dongle and get into factory service mode.
  3. Put the created USB stick into port 0 (closest to the reader) and run.
  4. After you run the initial remarry process, do not take it out of factory service mode.
  5. Put a BD movie disc in and run it on the PS3. (This restores your DRL files!)
  6. Then you can take it out of factory service mode.
  7. Launch as normal.

Needed files on USB stick

dev_usb000.rar (856.52 KB) 

http://www.zshare.net/download/890710435e792875/
http://hotfile.com/dl/114659343/2d8630a/dev_usb000.rar.html
http://depositfiles.com/en/files/6zb5a1ozf
http://www.megaupload.com/?d=O2M43K40
http://rapidshare.com/files/457728407/dev_usb000.rar
http://www.rapidspread.com/file.jsp?id=anxklm4bcu
http://www.easy-share.com/1914734717/dev_usb000.rar
Lv2diag.self                          MD5:C48E5EBFC00ABD89094CB73A2B0BEA59 / SHA1:D229AC694910272DDEA9276B9FD4A2664800638C / CRC32:C2D0A2B0 / CRC16:5327
manufacturing_updater_for_reset.self  MD5:9E3C9024E9243478D21C78E1C9DF2376 / SHA1:922EA202CA2EA36EBF2B5054605E17409B9A56E6 / CRC32:93F18A95 / CRC16:EA0D
fdm_spu_module.self                   MD5:9BDE16660221042A4440ED2C053A139E / SHA1:D63AA8F0F1C4A7A4497A9E297062CA6E9D2B568B / CRC32:B5961101 / CRC16:3D0C
PS3UPDAT.PUP  (see below)
cfg [folder]
- standalone.cfg        (original was MD5:24DB112BF90A4048462C6D26F4263507 / SHA1:519F627B9F367A2E0E05F956E9F2720E4C7AFE8C / CRC32:A3E44601 / CRC16:8619)

for comparison: 

ifcaro @ elotrolado:
- manufacturing_updater_for_reset.self  MD5:90168C03B217CE775A7839D87BBFF2A3 / SHA1:1E770010A3A6EF572AF39783A04DF792670998D3
3.55 downgrader :
- Lv2diag.self  (file1)                 MD5:099F33A7967F99E91C07E870FD78B3DB / CRC32:9338ABF2 / CRC16:4FCC
- Lv2diag.self  (file2)                 MD5:7A20BFDAE65EEFB47A4425DB1B52DCDE / CRC32:72740080 / CRC16:502A (same as 3.50--)
3.50 downgrader :
- Lv2diag.self  (file1)                 MD5:90168C03B217CE775A7839D87BBFF2A3 / CRC32:D1F0AAFC / CRC16:CD8D
- Lv2diag.self  (file2)                 MD5:7A20BFDAE65EEFB47A4425DB1B52DCDE / CRC32:72740080 / CRC16:502A
ObjectiveSuites files : 
- CONSOLE_SETUP_CEX.SIG.XML            (MD5:0DAE958782D5584DFF3A1EB880ABC067 / SHA1:544432CF2CED5836ED3B8BE9DED2898AA57AA00A)

Usable PS3UPDATE.PUP files

(in root)

2.30 RETAIL/CEX http://www.multiupload.com/62DJ3LSO62 

MD5:DD2E675FCE5D2EB28CA93BC32EDB3DE6
CRC32:811F7B02 / CRC16:9696
SHA1:FB639B3ED4E7CD5C457855CF1C9B59E06C05C87A
HMAC_SHA1:0x5ADB88B2B83C89DB0EA01E56A4D7DB4769A311B4

2.30 RETAIL-D/CEX http://www.multiupload.com/7PYR38RLO9 

MD5:B34951B1C3A181811B11238204044493
CRC32:908063EF / CRC16:2DDD
SHA1:999A238C0553DB6129C5BB89982ED190EBEE2867
HMAC_SHA1:0x5ADB88B2B83C89DB0EA01E56A4D7DB4769A311B4

Is on disk: BLES00259/BLUS30118, BLES00286, BCES00098, BLES00184/BLUS30132, BLES00166, BLES00251, BLES00256, BLES00238, BLES00250, BLES00289, BLES00276, BLES00277/BLES00280

3.15 RETAIL/CEX http://www.multiupload.com/4SGCDZM07C 

MD5:54EE80E14E479F8351A988EB9A472072
CRC32:E82D9526 / CRC16:7DB
SHA1:FC4E891E84333F9B37FF7F253ECA165AA416C6AD
HMAC_SHA1:0xD87AFAD8C786E0EEE83C0C96EF61492D78F37980

3.15 RETAIL-D/CEX http://www.multiupload.com/M53MVW3W7K 

MD5:80D7F3EC2CFEBF582926228AC3A11E21
CRC32:5D5C55CB / CRC16:D078
SHA1:7FE68E92353BAC93225272F27BF2DEB9AB6366A6
HMAC_SHA1:0xD87AFAD8C786E0EEE83C0C96EF61492D78F37980

Is on disk: BCUS98164, BLES00517, BLES00773, BLES00789, BCES00797, BLES00816, BLES00825, BLES00885, BLUS30295

Additional Notes on Remarry Procedure

  • 2.30 and 3.15 are not 'special', iirc firmware <=3.30 should be fine (>3.30 won't work) to use as reinstaller PUP.
  • Lv2diag.self for 3.55 downgrade has BD patched out. So in case you have a 3.55 console you wish to remarry, you can either:
    • lv2diag.self downgrade it first to 3.50 or lower and then use the remarry procedure ; or (even better!):
    • QA-flag extra it, then QA downgrade via recovery to <3.50 followed by remarry procedure.

Alternative method for restoring DRL : Downgrade BluRay Playback Issue #Fixing

If you have problems with remarry, but still get a good "Drive Init" message or where able to restore the original DRL backup from dev_flash3 of that BD-drive and it still does not work: try Restore Filesystem in the Recovery Menu.

CFG Settings

Remark: For some reason people are not looking in the CFG file for other selectable options.

e.g. (line 269 until line 280 quoted): 

#----------------------------------------------
# Drive Init
#   0 = ŽÀs‚µ‚È‚¢
#   1 = ŽÀs‚·‚é
#----------------------------------------------
1

This will remarry the drive to the console and remake the DRL files (setting it to 0 will NOT remarry it) 

#---------------------------------------------
# Install Systemsoftware
#   0 = ŽÀs‚µ‚È‚¢
#   1 = ŽÀs‚·‚é
#----------------------------------------------
1

This will install the firmware PUP that is on the USB stick in root (setting it to 0 will NOT install firmware)

Warning about editing CFG

Default is both options set to 1 and is confirmed to work on both PS3 FAT (NAND and NOR) and PS3 Slim (NOR). Strange things can happen when messing with the CFG and using nonvalid values or combinations.


full CFG breakdown

###############################################
# DiagÝ’èƒtƒ@ƒCƒ‹
# —ÊŽŽ—p
# WLAN & BT RSSIԻՏ
#
# 2006/09/06	kyoshida
#             Eurus‚Ì—L–³ŒŸo‘Ήž
# 2006/10/10	kyoshida
#             RSSI’l‚Ì‹KŠi‚ð
#            u’²®ŒŸ¸—v€F06.10.05v‚֍‡‚킹‚éB
###############################################
#=== ‹¤’ʐݒè =================================
#
# Œv‘ªƒ‚[ƒhÝ’è
#
#   0 = ’ʏ탉ƒCƒ“ŒŸ¸
#   1 = ƒfƒoƒbƒN Œv‘ªŒJ‚è•Ô‚µ
#----------------------------------------------
0

#=== ‹¤’ʐݒè =================================
#
# RSSI‚ª‹KŠi“à‚̏ꍇ‚ɁAshutdown‚ðŽÀs‚·‚é‚©H‚̐ݒè
#
#   0 = shutdown ‚µ‚È‚¢B
#   1 = shutdown ‚·‚éB
#----------------------------------------------
1

#=== ‹¤’ʐݒè =================================
#
# ¦shutdown = 00 ‚̏ꍇ‚É‚Ì‚Ý—LŒø¦
#
# RSSI‚ª‹KŠi“à(-OK-)‚̏ꍇ‚ɍs‚¤LED§Œä
#
# LED ID
#
#   1 = POWER(green)
#   2 = STATUS(red)
#
# LED ACTION
#
#   0 = OFF
#   1 = ON
#   2 = BLINK FAST
#   3 = BLINK SLOW
#----------------------------------------------
#<1>------
# LED ID
1

# LED ACTION
1

#<2>------
# LED ID
2

# LED ACTION
0

#=== ‹¤’ʐݒè =================================
#
# ¦shutdown = 00 ‚̏ꍇ‚É‚Ì‚Ý—LŒø¦
#
# RSSI‚ª‹KŠiŠO(-NG-)‚̏ꍇ‚ɍs‚¤LED§Œä
#
# LED ID
#
#   1 = POWER(green)
#   2 = STATUS(red)
#
# LED ACTION
#
#   0 = OFF
#   1 = ON
#   2 = BLINK FAST
#   3 = BLINK SLOW
#----------------------------------------------
#<1>------
# LED ID
1

# LED ACTION
2
#<2>------

# LED ID
2

# LED ACTION
0

#=== WLANÝ’è =================================
#
# <10i“ü—Í>
#
# RSSI‘ª’è‚ðs‚¤‚©H‚̐ݒè
#
#   0 = ‘ª’肵‚È‚¢B
#   1 = ‘ª’è‚·‚éB
#   2 = HW config‚ÅEurus—L‚è‚̏ꍇ‚Ì‚Ý‘ª’è‚·‚éB
#
# RSSI‚Ì‹KŠi
#
#   min[dBm]
#   max[dBm]
#
# OK count
# NG count
#
# ‘ª’èŽüŠú‚Ì–ÚˆÀ
#   [‘ª’èƒ`ƒƒƒ“ƒlƒ‹”] ~ 100msec
#----------------------------------------------

# <ANTENNA A>
0
-80
-20
2
200

# <ANTENNA B>
0
-80
-20
2
200

# <ANTENNA DIVERSITY>
0
-80
-20
2
200

#=== WLANÝ’è =================================
#
# <10i“ü—Í>
#
# RSSI‘ª’è‚ðs‚¤ƒ`ƒƒƒ“ƒlƒ‹‚̐ݒè
# 1 - 13ŒÂ‚ðŽw’è
#
#   channel < 14 = ‘ª’è‚·‚éB
#   channel > 13 = ‘ª’肵‚È‚¢B(255ˆÈ‰º)
#
#----------------------------------------------
# 1 - 13ch ‘S‚Ä‘ª’è‚·‚éê‡
1
2
3
4
5
6
7
8
9
10
11
12
13

###############################################
# samples
# 1 ‚Æ 13ch ‚¾‚¯‘ª’è‚·‚éê‡
##############################################
#1
#13
#77
#77
#77
#77
#77
#77
#77
#77
#77
#77
#77
#END-samples----------------------------------

#=== APÚ‘±ŒŸ¸ŠÖŒW‚̐ݒè ====================
#
# RSSI‘ª’è‚ðs‚¤‚©H‚̐ݒè
#
#   0 = ‘ª’肵‚È‚¢B
#   1 = ‘ª’è‚·‚éB
#   2 = HW config‚ÅEurus—L‚è‚̏ꍇ‚Ì‚Ý‘ª’è‚·‚éB
#
# OK count
# NG count
#
# Ú‘±Šm”FŽüŠú‚Ì–ÚˆÀ
#   100msec
#
# <AP>
#   SSID
#   IP ADDRESS
#
# <COOKIE>
#   IP ADDRESS
#   NETMASK
#   DEFAULT ROUTE
#   PRIMARY DNS
#
#----------------------------------------------
0
10
300

#<AP>
LV2DIAG-AP
192.168.1.1

#<COOKIE>
192.168.1.100
255.255.255.0
192.168.1.1
192.168.1.1

#=== BTÝ’è =================================
#
# <10i“ü—Í>
#
# RSSI‘ª’è‚ðs‚¤‚©H‚̐ݒè
#
#   0 = ‘ª’肵‚È‚¢B
#   1 = ‘ª’è‚·‚éB
#
# RSSI‚Ì‹KŠi
#
#   min[dBm]
#   max[dBm]
#
# OK count
# NG count
#
# ‘ª’èŽüŠú‚Ì–ÚˆÀ
#   100msec
#----------------------------------------------

# <ANTENNA 1>
0
-60
-1
2
300

# <ANTENNA 2>
0
-60
-1
2
30

# <ANTENNA DIVERSITY>
0
-60
-1
2
30

#=== CS Only ================================
#
#ƒRƒ“ƒgƒ[ƒ‰[‚ð‚Í‚¸‚·‚Æ‚«‚ÌLED“_“”ƒpƒ^[ƒ“
#
# LED ID
#
#   1 = POWER(green)
#   2 = STATUS(red)
#
# LED ACTION
#
#   0 = OFF
#   1 = ON
#   2 = BLINK FAST
#   3 = BLINK SLOW
#--------------------------------------------
#<1>------

# LED ID
1

# LED ACTION
2
#<2>------

# LED ID
2

# LED ACTION
0

###############################################
#=== ‚»‚Ì‘¼€–Ú‚ÌŽÀs‚Ì—L–³ ===================
# WLAN,BTŒŸ¸‚ÌŒã‚ÉŽÀs‚³‚ê‚é

Drive Init

#----------------------------------------------
# Drive Init
#   0 = ŽÀs‚µ‚È‚¢
#   1 = ŽÀs‚·‚é
#----------------------------------------------
1

This will remarry the drive to the console and remake the DRL files (setting it to 0 will NOT remarry it)

Install Systemsoftware

#---------------------------------------------
# Install Systemsoftware
#   0 = ŽÀs‚µ‚È‚¢
#   1 = ŽÀs‚·‚é
#----------------------------------------------
1

#---------------------------------------------
# freebdp
#   0 = ŽÀs‚µ‚È‚¢
#   1 = ŽÀs‚·‚é
#----------------------------------------------
0

#---------------------------------------------
# Install Systemsoftware ‚ÅŽg—p‚·‚éUpdater–¼
#----------------------------------------------
manufacturing_updater_for_reset.self
Retrieved from "http://www.psdevwiki.com/ps3/index.php?title=Remarry_Bluray_Drive&oldid=4616"