Template:CELL ERROR FACILITY SYSTEM SERVICE - 0x001

Generic errors

Name	Errorcode	Remarks
EAGAIN	0x80010001	The resource is temporarily unavailable
EINVAL	0x80010002	Invalid argument or flag.
ENOSYS	0x80010003	The feature is not yet implemented // (on Retail/CEX or Debug/DEX) sys_fsw_connect_event() or sys_fsw_disconnect_event() was executed on a machine other than the Reference Tool
ENOMEM	0x80010004	Memory allocation failed.
ESRCH	0x80010005	The resource with the specified identifier does not exist.
ENOENT	0x80010006	The file does not exist Note : This error can happen when you try to install a pkg that have an invalid name.
ENOEXEC	0x80010007	The file is in unrecognized format / The file is not a valid ELF file.
EDEADLK	0x80010008	Resource deadlock is avoided
EPERM	0x80010009	Operation not permitted An error occurred during the start operation (e.g.: debug self on retail)
EBUSY	0x8001000A	The device or resource is busy
ETIMEDOUT	0x8001000B	The operation is timed out
EABORT	0x8001000C	The operation is aborted
EFAULT	0x8001000D	Invalid memory access
ESTAT	0x8001000F	State of the target thread is invalid
EALIGN	0x80010010	Alignment is invalid
EKRESOURCE	0x80010011	Shortage of the kernel resources
EISDIR	0x80010012	The file is a directory
ECANCELED	0x80010013	Operation canceled
EEXIST	0x80010014	Entry already exists.(e.g.:"An error occurred during internal memory card creation."(80010014))
EISCONN	0x80010015	Port is already connected
ENOTCONN	0x80010016	Port is not connected
EAUTHFAIL	0x80010017	Failure in authorizing SELF. Program authentication fail (Error starting BluRay game)
ENOTMSELF	0x80010018	The file is not MSELF
ESYSVER	0x80010019	System version error
EAUTHFATAL	0x8001001A	Fatal system error occurred while authorizing SELF. SELF auth failure
EDOM	0x8001001B	Math domain violation
ERANGE	0x8001001C	Math range violation
EILSEQ	0x8001001D	Illegal multi-byte sequence in input
EFPOS	0x8001001E	File position error.
EINTR	0x8001001F	Syscall was interrupted.
EFBIG	0x80010020	File too large.
EMLINK	0x80010021	Too many links.
ENFILE	0x80010022	File table overflow.
ENOSPC	0x80010023	No space left on device.
ENOTTY	0x80010024	Not a TTY.
EPIPE	0x80010025	Broken pipe.
EROFS	0x80010026	Read-only filesystem (write fail).
ESPIPE	0x80010027	Illegal seek (e.g. seek on pipe).
E2BIG	0x80010028	Arg list too long.
EACCES	0x80010029	Access violation.
EBADF	0x8001002A	Invalid file descriptor.
EIO	0x8001002B	Filesystem mounting failed (actually IO error...EIO)
EMFILE	0x8001002C	Too many files open.
ENODEV	0x8001002D	No device.
ENOTDIR	0x8001002E	Not a directory.
ENXIO	0x8001002F	No such device or IO.
EXDEV	0x80010030	Cross-device link error.
EBADMSG	0x80010031	Bad Message.
EINPROGRESS	0x80010032	In progress.
EMSGSIZE	0x80010033	Message size error.
ENAMETOOLONG	0x80010034	Name too long.
ENOLCK	0x80010035	No lock.
ENOTEMPTY	0x80010036	Not empty.
EUNSUP	0x80010037	Not supported.
EFSSPECIFIC	0x80010038	File-system specific error.
EOVERFLOW	0x80010039	Overflow occured.
ENOTMOUNTED	0x8001003A	Filesystem not mounted. "An error occurred during the install operation". E.G.: unplugged usb during install.
ENOTSDATA	0x8001003B	Not SData.
	0x8001003C	Incorrect version in sys_load_param.
	0x8001003D	Pointer is null. When related to PARAM.SFO : "to play this game, you must insert the following disc. Insert the disc, and then start the game again. (8001003D)": can be resolved by pointing to (only) other PARAM.SFO with Lxx folder. In this case, it s similar than 0x8001003E but with some PARAM.SFO parameter (TITLE_ID?) embedded. Refresh it by using this Lxx or others [Tricks].
	0x8001003E	Pointer is null. When related to DISC.SFO (and PARAM.SFO) : "to play this game, you must insert the following disc. Insert the disc, and then start the game again. (8001003E) Install disc" : can be resolved by launching BD emulator, or remove the disc.sfo if there are one, using the original disc or using the [L** folder]
	0x8001003F

DECI3 Remote File Protocol / File Management Protocol / Controller Protocol errors (drfp/dfmp/ctrlp)

Name	Errorcode	Remarks
DRFP_EINVAL / DFMP_EINVAL / CTRLP_EINVAL	0x80010002	Argument is invalid (Invalid packet, e.g. controller information has been sent when its playback was not being processed)
DRFP_ENOMEM / DFMP_ENOMEM / CTRLP_ENOMEM	0x80010004	Not enough memory
DRFP_ENOENT / DFMP_ENOENT	0x80010006	File could not be found, or filename is invalid
DRFP_EBUSY / DFMP_EBUSY / CTRLP_EBUSY	0x8001000a	Already open (or already recording or playing)
DRFP_EISDIR / DFMP_EISDIR	0x80010012	Is a directory
DRFP_EEXIST / DFMP_EEXIST	0x80010014	File already exists
DRFP_EFBIG / DFMP_EFBIG	0x80010020	File is too big
DRFP_ENOSPC / DFMP_ENOSPC	0x80010023	Space cannot be allocated on disk
DRFP_EROFS / DFMP_EROFS	0x80010026	Write access was requested for read-only file system
DRFP_EACCES / DFMP_EACCES	0x80010029	Do not have access rights
DRFP_EBADF / DFMP_EBADF	0x8001002a	File descriptor is invalid
DRFP_EIO / DFMP_EIO	0x8001002b	I/O error
DRFP_EMFILE / DFMP_EMFILE	0x8001002c	Maximum number of operable files exceeded
DRFP_ENODEV / DFMP_ENODEV / CTRLP_ENODEV	0x8001002d	Specified device does not exist (or disconnected)
DRFP_ENOTDIR / DFMP_ENOTDIR	0x8001002e	Not a directory
DRFP_EXDEV / DFMP_EXDEV	0x80010030	Multiple devices are specified
DRFP_ENAMETOOLONG / DFMP_ENAMETOOLONG	0x80010034	File pathname is too long
DRFP_ENOTEMPTY / DFMP_ENOTEMPTY	0x80010036	Directory is not empty
DRFP_ENOTSUP / DFMP_EUNSUP / CTRLP_EUNSUP	0x80010037	Request is not supported by this device
DRFP_ESPECIFIC / DFMP_EFSSPECIFIC	0x80010038	Undefined error

Sys Net errors (libnet)

Name	Errorcode	Remarks
SYS_NET_ERROR_ENOENT	0x80010202
SYS_NET_ERROR_EINTR	0x80010204
SYS_NET_ERROR_EBADF	0x80010209
SYS_NET_ERROR_ENOMEM	0x8001020c
SYS_NET_ERROR_EACCES	0x8001020d
SYS_NET_ERROR_EFAULT	0x8001020e
SYS_NET_ERROR_EBUSY	0x80010210
SYS_NET_ERROR_EINVAL	0x80010216
SYS_NET_ERROR_EMFILE	0x80010218
SYS_NET_ERROR_ENOSPC	0x8001021c
SYS_NET_ERROR_EPIPE	0x80010220
SYS_NET_ERROR_EAGAIN SYS_NET_ERROR_EWOULDBLOCK	0x80010223
SYS_NET_ERROR_EINPROGRESS	0x80010224
SYS_NET_ERROR_EALREADY	0x80010225
SYS_NET_ERROR_EDESTADDRREQ	0x80010227
SYS_NET_ERROR_EMSGSIZE	0x80010228
SYS_NET_ERROR_EPROTOTYPE	0x80010229
SYS_NET_ERROR_ENOPROTOOPT	0x8001022a
SYS_NET_ERROR_EPROTONOSUPPORT	0x8001022b
SYS_NET_ERROR_EOPNOTSUPP	0x8001022d
SYS_NET_ERROR_EPFNOSUPPORT	0x8001022e
SYS_NET_ERROR_EAFNOSUPPORT	0x8001022f
SYS_NET_ERROR_EADDRINUSE	0x80010230
SYS_NET_ERROR_EADDRNOTAVAIL	0x80010231
SYS_NET_ERROR_ENETDOWN	0x80010232
SYS_NET_ERROR_ENETUNREACH	0x80010233
SYS_NET_ERROR_ECONNABORTED	0x80010235
SYS_NET_ERROR_ECONNRESET	0x80010236
SYS_NET_ERROR_ENOBUFS	0x80010237
SYS_NET_ERROR_EISCONN	0x80010238
SYS_NET_ERROR_ENOTCONN	0x80010239
SYS_NET_ERROR_ESHUTDOWN	0x8001023a
SYS_NET_ERROR_ETOOMANYREFS	0x8001023b
SYS_NET_ERROR_ETIMEDOUT	0x8001023c
SYS_NET_ERROR_ECONNREFUSED	0x8001023d
SYS_NET_ERROR_EHOSTDOWN	0x80010240
SYS_NET_ERROR_EHOSTUNREACH	0x80010241

Debug LV2 errors (liblv2dbg)

Name	Errorcode	Remarks
CELL_LV2DBG_ERROR_DEINVALIDARGUMENTS	0x80010409	Invalid arguments
CELL_LV2DBG_ERROR_DEOPERATIONDENIED	0x8001042c	Call of a liblv2dbg public function within the PS3 environment

Realtimeclock errors

Name	Errorcode	Remarks
CELL_RTC_ERROR_NOT_INITIALIZED	0x80010601	Library has not yet been initialized. Please initialize before use.
CELL_RTC_ERROR_INVALID_POINTER	0x80010602	The pointer passed in is invalid.
CELL_RTC_ERROR_INVALID_VALUE	0x80010603	A value in the arguments is invalid and cannot be used.
CELL_RTC_ERROR_INVALID_ARG	0x80010604	An argument contains invalid data.
CELL_RTC_ERROR_NOT_SUPPORTED	0x80010605	The feature is not supported
CELL_RTC_ERROR_NO_CLOCK	0x80010606	The clock is not available
CELL_RTC_ERROR_BAD_PARSE	0x80010607	Error occurred in parsing, perhaps an unknown format
CELL_RTC_ERROR_INVALID_YEAR	0x80010621	The year value is invalid
CELL_RTC_ERROR_INVALID_MONTH	0x80010622	The month value is invalid
CELL_RTC_ERROR_INVALID_DAY	0x80010623	The day value is invalid
CELL_RTC_ERROR_INVALID_HOUR	0x80010624	The hour value is invalid
CELL_RTC_ERROR_INVALID_MINUTE	0x80010625	The minute value is invalid
CELL_RTC_ERROR_INVALID_SECOND	0x80010626	The second value is invalid
CELL_RTC_ERROR_INVALID_MICROSECOND	0x80010627	The microsecond value is invalid

FIOS errors

Name	Errorcode	Remarks
CELL_FIOS_ERROR_INPROGRESS	0x80010701	I/O is in progress.
CELL_FIOS_ERROR_UNKNOWNCALLBACKEVENT	0x80010702	Callback return code: event was not handled.
CELL_FIOS_ERROR_NOTREADY	0x80010703	Callback return code: no buffer ready yet, try again later.
CELL_FIOS_ERROR_TIMEOUT	0x80010704	The deadline has been reached while waiting on an operation, and the I/O has not completed yet.
CELL_FIOS_ERROR_BADPATH	0x80010705	Bad path argument, or file not found.
CELL_FIOS_ERROR_BADHANDLE	0x80010706	Bad filehandle argument.
CELL_FIOS_ERROR_BADPARAM	0x80010707	Bad parameter (invalid or illegal).
CELL_FIOS_ERROR_CANCELLED	0x80010708	Operation was cancelled.
CELL_FIOS_ERROR_EOF	0x80010709	End-of-file was reached during a read; some data may have been returned prior to the EOF. Check the actual bytes transferred.
CELL_FIOS_ERROR_NOMEM	0x8001070A	Out of memory.
CELL_FIOS_ERROR_BADOFFSET	0x8001070B	Bad offset during seek.
CELL_FIOS_ERROR_BADCALLBACK	0x8001070C	Callback was NULL when it shouldn't have been.
CELL_FIOS_ERROR_PLATFORM	0x8001070D	Some platform-specific error occurred that is not enumerated here (for example, too many open files).
CELL_FIOS_ERROR_ACCESS	0x8001070E	Access was denied, you don't have appropriate security permission.
CELL_FIOS_ERROR_DECOMPRESSION	0x8001070F	Decompression failed.
CELL_FIOS_ERROR_READONLY	0x80010710	Write not supported by media or file access permissions.
CELL_FIOS_ERROR_NOBLOCK	0x80010711	Block APIs not supported by media.
CELL_FIOS_ERROR_NOPATH	0x80010712	Path APIs not supported by media.
CELL_FIOS_ERROR_MEDIAGONE	0x80010713	Media is no longer mounted. When this error code is returned in a mediacallback_proc, FIOS will not retry any I/O and will cancel all I/O to the corresponding media.
CELL_FIOS_ERROR_CANTIMMED	0x80010714	An operation had kOPF_IMMED set but I/O was required.

Sysmodule Error

Name	Errorcode	Remarks
CELL_SYSMODULE_ERROR_DUPLICATED	0x80012001	Tried to load a PRX that is already loaded
CELL_SYSMODULE_ERROR_UNKNOWN	0x80012002	Tried to load an unknown PRX
CELL_SYSMODULE_ERROR_UNLOADED	0x80012003	Tried to unload a PRX that is already unloaded, or the module is not loaded
CELL_SYSMODULE_ERROR_INVALID_MEMCONTAINER	0x80012004	An invalid memory container ID was passed
CELL_SYSMODULE_ERROR_FATAL	0x800120ff	Function call failed

placeholder errors

Name	Errorcode	Remarks