GbLAN
Jump to navigation
Jump to search
Gigabit LAN
The PS3 has 1 Gigabit Ethernet port. The port accepts Auto-MDIX (automatic medium-dependent interface crossover), so no need for special crosscables when hooking up the PS3 direct to the PC.
Gigabit LAN chips used
A sample of the GbLAN chips in different PS3 models:
| Ports | Size | Speed | Voltage | Packaging | Manufacturer | Serial Number | Description |
|---|---|---|---|---|---|---|---|
| 8 (3 used) | 20x20mm | Xtal X3501: 25MHz | 3.3V/1.9V/1.2V | 144-pin TQFP | Marvell | 88E6108-LAR1 | Used in earlier models |
| - | - | - | - | 64-pin QFN | Marvell | Alaska 88E1118R-NNC2 | Used in Slim models |
Marvell 88E6108-LAR1
Datasheet: (not available)
productcode meaning: 88E6108-LAR1 Type: Ethernet Speed : 1Gbps Ports : 8 Package : 144-TQFP (sorry, no explaination yet)
The Marvell 88E6108-LAR1 is sort of a switching hub chip, with several ports that can be used in different configurations:
Port 0 (usuable as MDI 4 dif.pair) : unused (tied to ground) Port 1 (usuable as MDI 4 dif.pair) : unused (tied to ground) Port 2 (usuable as MDI 4 dif.pair) : wired to external UTP connector Port 3 (GMII): Wired to SB Port 4 (usable as TX/RX dif.pair)(100FX): wired to Wifi Port 5 (usable as TX/RX dif.pair): unused (tied to ground) Port 6 (usable as TX/RX dif.pair): unused (tied to ground) Port 7 (usable as TX/RX dif.pair): unused (tied to ground)
Pinout IC3503
Productcode: 88E6108-B2-LAR1C000-P123 | PartNo.: 6-710-202-01
| Pin # | Name | Port | Description |
|---|---|---|---|
| 1 | RST | Power / Led / Xtal etc | - |
| 2 | AVDD | - | |
| 3 | NC | No Connection | |
| 4 | NC | No Connection | |
| 5 | NC | No Connection | |
| 6 | AVDD | - | |
| 7 | XTAL_IN | - | |
| 8 | XTAL_OUT | - | |
| 9 | VDD_CORE | - | |
| 10 | NC | No Connection | |
| 11 | NC | No Connection | |
| 12 | AVDD | - | |
| 13 | NC | No Connection | |
| 14 | NC | No Connection | |
| 15 | P0_LED3 | - | |
| 16 | P0_LED2 | - | |
| 17 | VDD_CORE | - | |
| 18 | P0_LED1 | - | |
| 19 | P0_LED0 | - | |
| 20 | VDDO_LED | - | |
| 21 | P1_LED3 | - | |
| 22 | VDD_CORE | - | |
| 23 | P1_LED3 | - | |
| 24 | P1_LED1 | - | |
| 25 | P1_LED0 | - | |
| 26 | VDDO_LED | - | |
| 27 | P2_LED3 | - | |
| 28 | P2_LED2 | - | |
| 29 | P2_LED1 | - | |
| 30 | P2_LED0 | - | |
| 31 | VDD_CORE | - | |
| 32 | MDC_PHY/PPU_EN | - | |
| 33 | VDDO_SMI_PHY | - | |
| 34 | MDIO_PHY | - | |
| 35 | VDD_PLL | - | |
| 36 | VDD_CORE | - | |
| 37 | P7_TXP | Port 7 (unused) |
- |
| 38 | P7_TXN | - | |
| 39 | P7_VDDAH | Ground | |
| 40 | P7_RXP | - | |
| 41 | P7_RXN | - | |
| 42 | VSS | Ground | |
| 43 | P6_RXP | Port 6 (unused) |
- |
| 44 | P6_RXN | - | |
| 45 | P6_VDDAH | Ground | |
| 46 | P6_TXN | - | |
| 47 | P6_TXP | - | |
| 48 | VDD_CORE | - | |
| 49 | P5_TXP | Port 5 (unused) |
- |
| 50 | P5_TXN | - | |
| 51 | P5_VDDAH | Ground | |
| 52 | P5_RXP | - | |
| 53 | P5_RXN | - | |
| 54 | VSS | Ground | |
| 55 | P4_RXN | Port 4 (100FX) | - |
| 56 | P4_RXP | - | |
| 57 | P4_VDDAH | - | |
| 58 | P4_TXN | - | |
| 59 | P4_TXP | - | |
| 60 | VDD_CORE | - | |
| 61 | VDD_P3 | Port 3 (GMII) | - |
| 62 | P3_CLK125N | - | |
| 63 | P3_TXEN/HALFDPX | - | |
| 64 | P3_TXD7/MODE2 | - | |
| 65 | P3_TXD6/MODE1 | - | |
| 66 | VDD_CORE | - | |
| 67 | P3_TXD5/MODE0 | - | |
| 68 | P3_TXD4/ADDR4 | - | |
| 69 | VDD0_P3 | - | |
| 70 | P3_TXD3/ADDR3 | - | |
| 71 | P3_TXD2/ADDR2 | - | |
| 72 | P3_TXD1/ADDR1 | - | |
| 73 | P3_TXD0/ADDR0 | - | |
| 74 | P3_TXCLK | - | |
| 75 | P3_GTXCLK | - | |
| 76 | VDD0_P3 | - | |
| 77 | P3_RXDV | - | |
| 78 | VDD_CORE | - | |
| 79 | P3_RXXEA | - | |
| 80 | P3_RXD7 | - | |
| 81 | P3_RXD6 | - | |
| 82 | P3_RXD5 | - | |
| 83 | P3_RXD4 | - | |
| 84 | VDD_CORE | - | |
| 85 | P3_RXD3 | - | |
| 86 | VDDO_P3 | - | |
| 87 | P3_RXD2 | - | |
| 88 | P3_RXD1 | - | |
| 89 | P3_RXD0 | - | |
| 90 | P3_RXCLK | - | |
| 91 | VDD_CORE | - | |
| 92 | P3_CRS | - | |
| 93 | P3_COL | - | |
| 94 | P3_ENABLE_PD | - | |
| 95 | INTn | - | |
| 96 | MDIO_CPU | - | |
| 97 | MDC_CPU | - | |
| 98 | VDD_CORE | - | |
| 99 | EE_DOUT | - | |
| 100 | VDDO_SMI_CPU | - | |
| 101 | EE_DIN/HD_FLOW_DIS | - | |
| 102 | EE_CLK/FD_FLOW_DIS | - | |
| 103 | EE_CS/EE_1K | - | |
| 104 | VDD_CORE | - | |
| 105 | SW_MODE0 PU | - | |
| 106 | SW_MODE1 PU | - | |
| 107 | VSS | Ground | |
| 108 | RESETn | - | |
| 109 | VSS | Port 2 (MDI) | Ground |
| 110 | P2_MDIN3 | - | |
| 111 | P2_MDIP3 | - | |
| 112 | P2_AVDD | - | |
| 113 | P2_MDIN2 | - | |
| 114 | P2_MDIP2 | - | |
| 115 | P2_MDIN1 | - | |
| 116 | P2_MDIP1 | - | |
| 117 | P2_AVDD | - | |
| 118 | P2_AVDD | - | |
| 119 | P2_MDIN0 | - | |
| 120 | P2_MDIP0 | - | |
| 121 | VSS | Port 1 (MDI) | Ground |
| 122 | P1_MDIN3 | - | |
| 123 | P1_MDIP3 | - | |
| 124 | P1_AVDD | - | |
| 125 | P1_MDIN2 | - | |
| 126 | P1_MDIP2 | - | |
| 127 | P1_MDIN1 | - | |
| 128 | P1_MDIP1 | - | |
| 129 | P1_AVDD | - | |
| 130 | P1_AVDD | - | |
| 131 | P1_MDIN0 | - | |
| 132 | P1_MDIP0 | - | |
| 133 | VSS | Port 0 (MDI) | Ground |
| 134 | P0_MDIN3 | - | |
| 135 | P0_MDIP3 | - | |
| 136 | P0_AVDD | - | |
| 137 | P0_MDIN2 | - | |
| 138 | P0_MDIP2 | - | |
| 139 | P0_MDIN1 | - | |
| 140 | P0_MDIP1 | - | |
| 141 | P0_AVDD | - | |
| 142 | P0_AVDD | - | |
| 143 | P0_MDIN0 | - | |
| 144 | P1_MDIP0 | - |
Pinout CN3501
Connectortype: RJ45 modular jack with LED | PartNo.: 1-820-763-12
| Pin # | Name | Description |
|---|---|---|
| 1 | VCC | - |
| 2 | TP1+ | - |
| 3 | TP1- | - |
| 4 | TP2+ | - |
| 5 | TP2- | - |
| 6 | GND | - |
| 7 | TP3+ | - |
| 8 | TP3- | - |
| 9 | TP4+ | - |
| 10 | TP4- | - |
| 11 | VCC | - |
Marvell Alaska 88E1118R-NNC2
productcode meaning: 88E1118R-NNC2 Type: Ethernet Speed : 1Gbps Package : 64-pin QFN (sorry, no explaination yet)
pinout
(nothing here, please help fill this in)
| Pin # | Name | Port | Description |
|---|---|---|---|
| 1 | - | - | |
| 2 | - | - | |
| 3 | - | - | |
| 4 | - | - | |
| 5 | - | - | |
| 6 | - | - | |
| 7 | - | - | |
| 8 | - | - | |
| 9 | - | - | |
| 10 | - | - | |
| 11 | - | - | |
| 12 | - | - | |
| 13 | - | - | |
| 14 | - | - | |
| 15 | - | - | |
| 16 | - | - | |
| 17 | - | - | |
| 18 | - | - | |
| 19 | - | - | |
| 20 | - | - | |
| 21 | - | - | |
| 22 | - | - | |
| 23 | - | - | |
| 24 | - | - | |
| 25 | - | - | |
| 26 | - | - | |
| 27 | - | - | |
| 28 | - | - | |
| 29 | - | - | |
| 30 | - | - | |
| 31 | - | - | |
| 32 | - | - | |
| 33 | - | - | |
| 34 | - | - | |
| 35 | - | - | |
| 36 | - | - | |
| 37 | - | - | |
| 38 | - | - | |
| 39 | - | - | |
| 40 | - | - | |
| 41 | - | - | |
| 42 | - | - | |
| 43 | - | - | |
| 44 | - | - | |
| 45 | - | - | |
| 46 | - | - | |
| 47 | - | - | |
| 48 | - | - | |
| 49 | - | - | |
| 50 | - | - | |
| 51 | - | - | |
| 52 | - | - | |
| 53 | - | - | |
| 54 | - | - | |
| 55 | - | - | |
| 56 | - | - | |
| 57 | - | - | |
| 58 | - | - | |
| 59 | - | - | |
| 60 | - | - | |
| 61 | - | - | |
| 62 | - | - | |
| 63 | - | - | |
| 64 | - | - |
Jumbo frames
From Linux perspective (under OtherOS <=3.15), the old drivers set the MTU to 2308, while newer versions set the MTU of 1518. This could be a hypervisor restriction (needs research).
MTU is set with vsh using syscall net_ioctl (libnet)