Talk:Syscon Firmware
System Controller (SC) manager
- sc_mgr_get_srh (0x9001)
- sc_mgr_set_srh (0x9002)
- sc_mgr_encrypt (0x9003)
- sc_mgr_decrypt (0x9004)
- Init For VTRM (0x9005)
- sc_mgr_get_region_data (0x9006)
- sc_mgr_set_region_data (0x9007)
- Set RTC (0x9008)
- Get Time (0x9009)
- Set Time (0x900A)
- sc_mgr_read_eprom (0x900B)
- sc_mgr_write_eprom (0x900C)
- Init For Updater (0x900D)
- sc_mgr_get_sc_status (0x900E)
- sc_iso_header (sc_iso_sc_binary_patch - 0x9011)
- SC RTC Factory (0x9012)
- Correct RTC Factory (0x9013)
- Set SC Status (0x9014)
- Backup Root Info (0x9015)
- Restore Root Info (0x9016)
- Read System Data From SC EEPROM - Indi Info Manager 0x17007)
SC - sc_iso.self
- sc_iso_sc_binary_patch
- sc_iso_get_sc_status
- sc_iso_get_property
- sb_iso_get_rnd
- sb_iso_encdec_key
This should be a good starting point but leaves enough to explore yourself though: http://pastebin.com/NxVkGCdp (for version 1.02)
See Graf's PSGroove Payload and HV page #0x9000 - SC_Manager / HVpage #System Controller
SYS_CON_FIRMWARE-PKGs.rar (51.92 KB)
SYS_CON_FIRMWARE_01000004.pkg (5376 bytes) Firmware 1.30 up to 1.80 (not 1.81 and higher) SYS_CON_FIRMWARE_01000005.pkg (5376 bytes) Firmware 1.81 up to 3.30 (not 3.40 and higher) SYS_CON_FIRMWARE_01000006.pkg (5376 bytes) Firmware 3.40/3.41/3.42/3.50/3.55/3.56/3.60/3.61/3.65 SYS_CON_FIRMWARE_01010302.pkg (5376 bytes) Firmware 1.81 up to 3.30 (not 3.40 and higher) SYS_CON_FIRMWARE_01010303.pkg (5376 bytes) Firmware 3.40/3.41/3.42/3.50/3.55/3.56/3.60/3.61/3.65 SYS_CON_FIRMWARE_01020302.pkg (5376 bytes) Firmware 3.40/3.41/3.42/3.50/3.55/3.56/3.60/3.61/3.65 SYS_CON_FIRMWARE_01030302.pkg (5376 bytes) Firmware 3.40/3.41/3.42/3.50/3.55/3.56/3.60/3.61/3.65 SYS_CON_FIRMWARE_01040402.pkg (5376 bytes) Firmware 3.40/3.41/3.42/3.50/3.55/3.56/3.60/3.61/3.65 SYS_CON_FIRMWARE_01050002.pkg (5376 bytes) Firmware 3.40/3.41/3.42/3.50/3.55/3.56/3.60/3.61/3.65 SYS_CON_FIRMWARE_S1_00010002083E0832.pkg (5376 bytes) Firmware 3.00/3.01/3.10/3.15/3.20/3.21/3.30/3.40/3.41/3.42/3.50/3.55/3.56/3.60/3.61/3.65 SYS_CON_FIRMWARE_01050101.pkg (5376 bytes) Firmware 3.41/3.42/3.50/3.55/3.56/3.60/3.61/3.65
Updater log lines related to Syscon just after BD firmware, Multi-Card controller, BlueTooth firmware (in this case CEX 3.55) just before post processing and cleanup update status :
Update System controller firmware read SC patch package (4864 bytes) elapsed = 3 msec read SC patch package (4864 bytes) elapsed = 3 msec read SC patch package (4864 bytes) elapsed = 3 msec read SC patch package (4864 bytes) elapsed = 2 msec read SC patch package (4864 bytes) elapsed = 2 msec read SC patch package (4864 bytes) elapsed = 3 msec read SC patch package (4864 bytes) elapsed = 2 msec read SC patch package (4864 bytes) elapsed = 3 msec Update System controller firmware done(0x8002f000)
PS3 Retail == PS3 TEST != PS3 TOOL I try to get PS3 TOOL SC Firmwares.
It is suggested that the Syscon EEPROM is 512KB and the full (encrypted) firmware is <400KB (on Ref.Tool the Syscon is updated by overwiting the whole Syscon firmware : e.g. v1.0.5c1_TMU510_u.bin 384KB)
Syscon commands:
ver errlog auth1 auth2 fandiag xdrdiag xiodiag bestat sysdiag syslog
bringup (PowerOn State) shutdown (PowerOff State) powersw resetsw bootbeep stat bootbeep on BOOT BEEP ON: DONE bootbeep off BOOT BEEP OFF: DONE xdrdiag start errlog tmpforcp cp beepremote cp beep2kn1n3 cp beep2kn2n3 /usr/bin/sx halt HALT: OK version firmud Done. cp ready CP READY: OK cp busy CP BUSY: OK cp reset CP RESET: OK bestat xdrdiag info xdrdiag result xiodiag fandiag diagnose
The diag commands are usually for the backup bank, the main only supports firmud
CP root pass on Ref.Tool: Cytology