Strings

From PS3 Developer wiki
Revision as of 15:28, 24 November 2013 by Zecoxao (talk | contribs)
Jump to navigation Jump to search

Description

Strings. Arrays of chars. In this case these arrays make sense and display information about what is happening inside the console. The goal of this page is to find as many strings as possible for documentative purposes.

Are these strings legal

They're words. I don't know any case of illegal words, but in case this is somewhat illegal, the moderator can delete the page and it'll be done.

Tools used

Only one tool was used. The strings linux command. The extraction of the pup was made with pupexplode. Cygwin x86 was used as a command line interface.

Strings

aim_spu_module

(spu)start aim spu module!
(spu) PU DMA area start address is not align 16byte
(spu) PU EID area start address is not align 16byte
(spu) PU DMA area size is not equall to AIM_DMA_SIZE

emer_init

pastebin

First Chunk

factory/recover mode references
is factory mode ret[%x]  
get recover mode ret[%x]  
factory mode ON  recover flag[%x]
factory mode ON  recover flag[%x] --> [%x]
set recover mode ret[%x]
cellPad references
cellPadEnd() %x 
cellPadGetPadInfo2 [%08x] 
cellPadConfigSetLed [%08x]
file references
ss::g_emer_init::get_pup_filepath() error
ss::g_emer_init::get_pup_filepath() error
File open error [%s]
file read error [%s] return value %d
file read error segment_table [%s] return value [%d]
file seek error [%s] seek value [%lld] return value %d
file read error [%s] return value [%d]
CELL_FS_IOS:PATA1_HDD_DRIVE
CELL_FS_FAT
emer_init references
emer_init::search_update_package() ERROR %d 
emer_init::probe_hdd() ERROR %d 
emer_init::search_regions() ERROR %d 
emer_init::prepare_partitions() ERROR %d 
emer_init::setup_updating_environment() ERROR %d
others
PowerStateError!! [%d]
RescueUtilityGetTvSetting %x 
argc [%d] argv[1] [%s]
Gcm Init Memory Shortage. 
Gcm Init Memory Shortage. 
-mode=safe
Resolution Error %d
Format Error %d
texture
tex_ratio
position
color
modelViewProj
ramE
/dev_hdd1/PS3UPDATE
Unknown ERROR!!!! %d 
ErrorPage[%d] Code[%d]
/dev_hdd1
The hard disk cannot be accessed. (01) %x
The hard disk cannot be accessed. (03) %x
cellSsAimIsCEX() %x
g_vshTarget : [%d]
Thread join failed. 
Thread join failed. 
Not Create Thread!! 
Not Create Thread!! 
ErrorCode [%d]
countdown_thread
update_manager_if::set_update_status() ERROR %d

lv2 dump (Rebug 4.46)

http://pastebin.com/qXvpxvVE

Game IDs

BLES00012
BLUS30013
BLAS50004
NPJA00007
NPUA80001
NPEA00021
BLUS30020
BLES00029
BLJM60016
NPHA70006
BCJS30066
BCAS25008
BCES01007
NPEA00321
NPEA90084
NPEA90085
NPEA90086
NPUA70118
NPUA70138
NPUA30067
NPUA70133
NPUA70134
NPUA70167
BCUS98234
BCJS37003
NPJA00071
NPJA90176
NPJA90177
NPJA90178
BLUS30940
BLES01707
BLJM60566
NPJB00218
NPEB00831
NPHB00504
NPUB30750

MFC

MFC_DAR 0x%lx, MFC_DSISR 0x%lx
PFN MFC_CNTL %x
PGR MFC_CNTL %x
MFC FIR
DSI segment, MFC_DAR 0x%llx %s #%x
DSI storage, MFC_DSISR 0x%llx, MFC_DAR 0x%llx %s #%x
mfceieio
mfcsync
MFC context:
 SPU
 %4sQ #%1x: EA %016llx LSA %05x Size %04x Op %02x Tag %02x R/T %01x%01x
           LtAddr %04x LtSize %03x Lt/No/Q/Ea/Ce/eV/lB/Sb/Ib  %c%c%c%c%c%c%c%c%c
 SPU tag count   Prxy tag count      SPU Sb/Lb/Fb  Prxy Sb/Fb
 #%02d %02d  #%02d %02d   #%02d %1d  #%02d %1d    #%1x      %c%c%c            %c%c

BT

BT: deprecate! @ bt_cancel_connect_accept_controller()
BT: permission denied
BT: Invalid message!!
BT: copyin() failed! (%x)
BT: copyout() failed! (%x)
BT: Database::Lookup() failed!
BT: Invalid command!! (%d)
BT: mutex_create() failed! => (%x)
BT: bt_set_device_info() failed! => 0x%x
BT: bt_unregister_ops() failed! => 0x%x
BT: bt_register_ops() failed! => 0x%x
PlayStation(R) Controller
BT: bt_get_device_info() failed! => 0x%x
BT: bt_get_all_device_addr() failed! => 0x%x
BT: Unknown service mask!! (0x%02x)
BT: address duplicate!!
BT: connection over!!
BT: no memory!
BT: no SDP Info!! (%x)
BT: invalid blockLength!
BT: invalid subband!
BT: invalid allocation method!
BT: bt_port_control(RX, SET_CONF) failed! => 0x%x
BT: bt_port_control(TX, SET_CONF) failed! => 0x%x
BT: too big!! (%d)
BT: page_allocate() failed! (%x)
BT: bt_port_control(RX, GET_LEN) failed! => 0x%x
BT: bt_port_control(CRX, TRANSFER) failed! => 0x%x
BT: bt_port_control(TX, SET_STATUS) failed! => 0x%x
BT: bt_port_control(RX, SET_GAIN) failed! => 0x%x
BT: bt_port_control(ITX, ALLOC) failed! => 0x%x
BT: bt_port_control(IRX, ALLOC) failed! => 0x%x
BT: bt_port_control(CTX, ALLOC) failed! => 0x%x
BT: bt_port_control(CRX, ALLOC) failed! => 0x%x
BT: config_service::get_instance() failed!
BT: register_service() => (%x)
BT: no BusDriver!! @ Available()
BT: config_service::get_instance() => (ENOMEM)
BT: unregister_service() failed! => (%x)
BT: no BusDriver!! @ Unavailable()
BT: no address!!
BT: bt_port_control(TX, GET_LEN) failed! => 0x%x
BT: get_id_table() failed!
BT: reserve_id() failed! (%x)
BT: event_port_create() failed! (%x)
BT: event_port_connect() failed! (%x)
BT: page_export_to_proc() failed! (%x)
BT: event_port_send() failed! (%x)
BT: callback inhibited.
BT: bt_send_passkey(Reject) failed! => (%x)
BT: bt_send_passkey() failed! => (%x)
BT: bt_send_passkey() failed! => (%x) @ onPasskey()
BT: Bluetooth is not active!
BT: bt_inquiry_cancel() failed! => (%x)
BT: bt_inquiry_start() failed! => (%x)
BT: bt_send_passkey() failed! => (%x) @ SendPasskey()
BT: bt_connect_start() failed! => (%x)
BT: bt_connect_cancel() failed! => (%x)
BT: encapsulation error!
BT: No memory!!
BT: no SDP Info!! (m_pSdp)
BT: no SDP Info!! (isValid)
BT: inhibit onUnavailable!
BT: no DeviceInterface!
BT: inhibit onAvailable!
BT: no place!!
BT: SetReport(InputReport) is not supported yet.
BT: SetReport(OutputReport) is not supported yet.
BT: GetReport(InputReport) is not supported yet.
BT: GetReport(OutputReport) is not supported yet.
BT: no device!!
BT: GetProtocol() is not supported yet.
BT: GetIdle() is not supported yet.
BT: SDPDataElementParser error!
USBBTAUDIO: deprecate!
USBBTAUDIO: permission denied
USBBTAUDIO: Invalid command!! (%d)
USBBTAUDIO: mutex_create() failed! => (%x)
USBBTAUDIO
USBBTAUDIO: failed to send event. (Bluetooth device disabled)
USBBTAUDIO: * message crossed! (same address)
USBBTAUDIO: * connection is full!!
USBBTAUDIO: failed to send event. (USB device disabled)
USBBTAUDIO: failed to record!
USBBTAUDIO: USBD is not active!
USBBTAUDIO: unregister_service() => (%x)
USBBTAUDIO: register_service() => (%x)
USBBTAUDIO: no memory!
USBBTAUDIO: no space!
USBBTAUDIO: no ServiceInfo!
USBBTAUDIO: failed to send event.
USBBTAUDIO: Bt close error! => (%x)
USBBTAUDIO: invalid frequency!
USBBTAUDIO: invalid block length!
USBBTAUDIO: invalid channel mode!
USBBTAUDIO: invalid allocation method!
USBBTAUDIO: invalid subband!
USBBTAUDIO: Handle full!!

sys_net

sys_netdev_free_packet
sys_net_bnet_kabort_socket
sys_net_bnet_sysctl
sys_net_bnet_select
sys_net_bnet_poll
sys_net_bnet_close
sys_net_bnet_ioctl
sys_net_bnet_getpeername
sys_net_bnet_getsockname
sys_net_bnet_getsockopt
sys_net_bnet_setsockopt
sys_net_bnet_shutdown
sys_net_bnet_recvfrom
sys_net_bnet_recvmsg
sys_net_bnet_sendto
sys_net_bnet_sendmsg
sys_net_bnet_connect
sys_net_bnet_accept
sys_net_bnet_listen
sys_net_bnet_bind
sys_net_bnet_socket
sys_net_bnet_abort_thread
sys_net_bnet_abort_socket
sys_net_bnet_control
sys_net_bnet_get_sockinfo_sa

FS

CELL_FS_IOS:
CELL_FS_UTILITY:
ATA_HDD
PATA1_HDD_DRIVE
USB_MASS_STORAGE
BUILTIN_FLASH
BUILTIN_FLSH
MEMORY_STICK
SD_CARD
COMPACT_FLASH
CELL_FS_IOS:BUILTIN_FLASH
CELL_FS_IOS:BUILTIN_FLSH1
CELL_FS_IOS:BUILTIN_FLSH2
CELL_FS_IOS:BUILTIN_FLSH3
CELL_FS_IOS:BUILTIN_FLSH4
CELL_FS_IOS:ATA_HDD
CELL_FS_IOS:PATA1_HDD_DRIVE
CELL_FS_UTILITY:HDD0
CELL_FS_UTILITY:HDD1
CELL_FS_UTILITY:HDD2

lv1 dump (Rebug 4.46)

http://pastebin.com/M6MMmXEc

Retrieved from "http://www.psdevwiki.com/ps3/index.php?title=Strings&oldid=24050"