Template:Bitstreams 1.2/1.21
Jump to navigation
Jump to search
121018_0031
<uf6668> hi everybody <uf6668> quick announcement <uf6668> here's the latest dat: http://www.sendspace.com/file/rwz8jx <uf6668> this is ONLY for 1.2 <uf6668> if you want to use on 1.1 or 1.0, you will need to make modifications <uf6668> it enables following: <uf6668> 1) dual boot using a switch (led on = secondary nand/nor, led off = primary nand/nor) <uf6668> 2) both solderless nand and nor together <uf6668> the new structure is not ready yet because I've dev'd it on 250 and I have to fit it into 125 <uf6668> regarding opensource, the api will only be for the new architecture, so only after i fit it into 125
121106_2121
from Progskeet Website: New release for 1.2, dumping and writing should be much faster now. http://www.progskeet.com/forum/viewtopic.php?f=9&t=4231
130330_1909
- Increased metastability of USB (should no longer disconnect)
- Restored Samsung Q compatibility that was caused by dualboot pin allocation
for anyone who has v1.2/v1.21: https://dl.dropbox.com/u/52587949/ProgSkeet_12_130330_1909.dat / http://www.sendspace.com/file/ua6u2o makes it work like a 1.1
130401_1824
- Added timeout for reads/writes (1ms), no more blocking
- Fixed bug where it would read gpio from data pins rather than from gpio pins
130401_2010
ProgSkeet_12_130401_2010.dat
- Reduced timeout from 1.3ms down to 320ns per word
<uf6667> https://dl.dropbox.com/u/52587949/ProgSkeet_12_130401_2010.dat <uf6667> I made this yesterday Mancer <uf6667> I introduced a timeout for the "rdy" pin <uf6667> so that in case rdy never goes high <uf6667> it will continue anyway
130402_1730
- Added metastability to the DQ ports to filter out noise and glitches