HV Syscalls

NOTE: Update with graf's work. It'll probably fill in some of the undocumented functions.

lv1_allocate_memory

Create a memory region in the Hypervisor Virtual Address Space (vas)

Kernel Call

result = lv1_allocate_memory( /*IN*/ size, page_size_exp, 0, flags, /*OUT*/ &addr, &muid );

Parameters

Inputs
Register	Description
R3	size - of the region to allocate, must be a multiple of page_size
R4	page_size_exp - where required page_size = 2 ^ page_size_exp
R5	0 - Unknown, see notes
R6	flags - (from linux/include/asm-powerpc/lv1call.h) bit 63: transferability: TF_NO = 0×00, TF_YES = 0×01 bit 62: destruction_scheme: DS_NO_CONNECTIONS = 0×00, DS_ANYTIME = 0×02 bit 61: fail or alternative: FA_FAIL = 0×00, FA_ALTERNATIVE = 0×04 bit 60: need LPAR address 0: ADDR_ANY = 0×00, ADDR_0 = 0×08 function unknown.
Outputs
Register	Description
R3	Status - 0 = OK, LV1_RESOURCE_SHORTAGE (-2), LV1_NO_ENTRY (-6), LV1_DUPLICATE_ENTRY (-7)
R4	addr - LPAR Address of region
R5	muid - Unknown, unused by Kernel

Notes:

page_size_exp takes values of 12 (page_size = 4K) to 21 (page_size = 2M) before LV1_RESOURCE_SHORTAGE (-2) is returned under a fully booted Linux OS. Higher values (24, page_size = 16M) can be found in the actual kernel source and can presumably be made before the OS has fully booted. page_size_exp values below 12 cause a return status of LV1_ILLEGAL_PARAMETER_VALUE (-17).

Input R5 was speculated to be the initialization value for the allocated region, but appears not to be the case. Values other than 0 or 1 appear to return a status of LV1_NO_ENTRY (-6), though a valid value of page_size_exp appears to be checked first (-17 is returned for invalid values of page_size_exp, regardless of the value of R5).

Allocations with flags = 0×00, 0×01, 0×02, 0×03 and 0×04 were successful though the effects of the flags could not be tested at this point. Allocations with flags >= 0×400 return LV1_ILLEGAL_PARAMETER_VALUE.

Initial tests allocating memory with flags = 0×08 (ADDR_0, presumably request physical address rather than logical partition address) result in a status of LV1_DUPLICATE_ENTRY (-7). This and the previous return value of -6 suggest an association with a database of some kind (repository values or memory maps?). It appears that some form of allocation may be taking place as LV1_ILLEGAL_PARAMETER_VALUE and LV1_RESOURCE_SHORTAGE are reported for invalid input parameters, rather than LV1_DUPLICATE_ENTRY.

For all successful allocations so far, output muid (R5) = 1

lv1_write_htab_entry

Write an entry to the hash page table.

Kernel Call

result = lv1_write_htab_entry( /*IN*/ vas_id, slot, va, pa );

Parameters

Inputs
Register	Description
R3	vas_id - virtual address space id (0 for current)
R4	slot - table slot to write entry to
R5	va - first half of PTE
R6	pa - second half of PTE, except RPN is replaced with LPAR address
Outputs
Register	Description
R3	Status - 0 = OK, Other values are unknown, but indicate failure.

lv1_construct_virtual_address_space

Construct a PPE virtual address space.

Kernel Call

result = lv1_construct_virtual_address_space( /*IN*/ htab_size, number_of_sizes, page_sizes, /*OUT*/ &vas_id, &act_htab_size );

Parameters

Inputs
Register	Description
R3	htab_size - must be 18, 19 or 20 (256KB, 512KB or 1MB)
R4	number_of_sizes - How many page sizes are specified in page_sizes
R5	page_sizes - see notes
Outputs
Register	Description
R3	Status - 0 = OK, Other values are unknown, but indicate failure.
R4	vas_id - virtual address space id
R5	act_htab_size - actual hash table size?

Notes:

Page sizes are specified as the power of two for the desired sizes. Each power of two is stored as an 8 bit field in page_sizes, starting from the MSB.

The “pages_sizes” parameter is set in “mm.c” using the following function:

page_sizes = make_page_sizes(PAGE_SHIFT_16M, PAGE_SHIFT_64K);

static unsigned long make_page_sizes(unsigned long a, unsigned long b)
{
	return (a << 56) | (b << 48);
}

lv1_invalidate_htab_entries

Not used in current kernel.

Abstract Call

result = lv1_invalidate_htab_entries( /*IN*/ p1, p2, p3, p4, p5 );

Parameters

Inputs
Register	Description
R3	p1 - Unknown
R4	p2 - Unknown
R5	p3 - Unknown
R6	p4 - Unknown
R7	p5 - Unknown
Outputs
Register	Description
R3	Status?

lv1_get_virtual_address_space_id_of_ppe

Returns the virtual address space id of the PPE.

Kernel Call

result = lv1_get_virtual_address_space_id_of_ppe( /*IN*/ ppe_id , /*OUT*/ &vas_id );

Parameters

Inputs
Register	Description
R3	PPE id
Outputs
Register	Description
R3	status: 0 = LV1_SUCCESS
R4	vas_id - virtual address space id of the PPE

Notes:

Regardless of the ppe_id, when called from kernel module init function, vas_id always seems to be 11.

lv1_query_logical_partition_address_region_info

Retrieve address region information for the specified logical partition address region.

Kernel Call

result = lv1_query_logical_partition_address_region_info( /*IN*/ 0,
   /*OUT*/ &start_address, &size, &access_right, &max_page_size, &flags);

Parameters

Inputs
Register	Description
R3	0 - logical partition address region (lpar)
Outputs
Register	Description
R3	status: 0 = LV1_SUCCESS
R4	start_address - start address of logical partition address region
R5	size - size of logical partition address region
R6	access_right - ?
R7	max_page_size - maximum page size of logical partition address region? or order of the allocation?
R8	flags - ?

Notes:

Only the “max_page_size” parameter is currently used by the Kernel, in “mm.c”

Test Results

Register	Hex	Decimal	Comment
R3	0x00000000	(0)	value does not seem to effect result
Outputs
R3	0×00000000	(0)	LV1_SUCCESS
R4	0×00000000	(0)	start_address
R5	0×08000000	(134217728)	size - 128 Mb
R6	0×00000003	(3)	access_right
R7	0x0000001b	(27)	max_page_size
R8	0×00000008	(8)	flags

This suggests lpar 0 is a special lpar representing the first 128MB of RAM that are always available at boot time. In this case, max_page_size seems to correspond to the order of the allocation (2**27 = 128 MB). The meaning of access_right and flags is unknown.

Also works on a lpar obtained from lv1_allocate_memory, for example

lv1_allocate_memory(4096 /* size */, 12 /* page size */, 0, 0, &lpar, &muid);
lv1_query_logical_partition_address_region_info(lpar, &start_address, &size, &access_right, &max_page_size, &flags);

returns:

Register	Hex	Decimal	Comment
R3	0x30000001f00	(3298534891264)	lpar obtained from lv1_allocate_memory
Outputs
R3	0×00000000	(0)	LV1_SUCCESS
R4	0×30000001f00	(0)	start_address (same as input lpar)
R5	0×00001000	(4096)	size - 4kB
R6	0×00000003	(3)	access_right
R7	0x0000000c	(12)	max_page_size
R8	0×00000000	(0)	flags

lv1_select_virtual_address_space

Select an alternative virtual address space.

Kernel Call

result = lv1_select_virtual_address_space( /*IN*/ vas_id );

Parameters

Inputs
Register	Description
R3	vas_id - virtual address space id
Outputs
Register	Description
R3	Status - 0 = OK, Other values are unknown, but indicate failure.

Notes:

In “mm.c” When destructing a virtual address space, a call to select address space 0 (default?) is performed first.

Calling lv1_select_virtual_address_space(0) from a kernel module init function causes the PS3 to hang.

lv1_undocumented_function_8

Returns current HV uptime. (NOTE: Use graf's work here)

lv1_pause

Called during the Kernel idle loop - puts the PPE thread into an inactive state.

Kernel Call

result = lv1_pause( /*IN*/ mode );

Parameters

Inputs
Register	Description
R3	mode: 0 = wake on DEC interrupt, 1 = ignore DEC interrupt
Outputs
Register	Description
R3	status: 0 = LV1_SUCCESS, -17 = LV1_ILLEGAL_PARAMETER_VALUE

Notes:

LV1_ILLEGAL_PARAMETER_VALUE is returned for values of “mode” other than 0 or 1.

Comment from setup.c

/*
* lv1_pause() puts the PPE thread into inactive state until an
* irq on an unmasked plug exists. MSR[EE] has no effect.
* flags: 0 = wake on DEC interrupt, 1 = ignore DEC interrupt.
*/

lv1_destruct_virtual_address_space

Destruct a virtual address space.

Kernel Call

lv1_destruct_virtual_address_space( /*IN*/ vas_id );

Parameters

Inputs
Register	Description
R3	vas_id - virtual address space id
Outputs
Register	Description
R3	Status?

Notes:

Called with 0 in R3 crashes my PS3. Light turns red, appears to be off

lv1_configure_irq_state_bitmap

Register the address of a HV plug-outlet bitmap with the Hypervisor.

Kernel Call

result = lv1_configure_irq_state_bitmap( /*IN*/ ppe_id, cpu_id, bmp_addr );

Parameters

Inputs
Register	Description
R3	ppe_id - PPE id
R4	cpu_id - PPE CPU id
R5	bmp_addr - lpar address of state bitmap
Outputs
Register	Description
R3	Status - 0 = OK, Other values are unknown, but indicate failure.

Notes:

Comment from interrupt.c:

/**
* The HV mantains per SMT thread mappings of HV outlet to HV plug on
* behalf of the guest.  These mappings are implemented as 256 bit guest
* supplied bitmaps indexed by plug number.  The addresses of the bitmaps
* are registered with the HV through lv1_configure_irq_state_bitmap().
* The HV requires that the 512 bits of status + mask not cross a page
* boundary.  PS3_BMP_MINALIGN is used to define this minimal 64 byte
* alignment.
*
* The HV supports 256 plugs per thread, assigned as {0..255}, for a total
* of 512 plugs supported on a processor.  To simplify the logic this
* implementation equates HV plug value to Linux virq value, constrains each
* interrupt to have a system wide unique plug number, and limits the range
* of the plug values to map into the first dword of the bitmaps.  This
* gives a usable range of plug values of  {NUM_ISA_INTERRUPTS..63}.  Note
* that there is no constraint on how many in this set an individual thread
* can acquire.
*/

lv1_connect_irq_plug_ext

Connect a HV outlet to a CPU and virtual irq.

Kernel Call

result = lv1_connect_irq_plug_ext( /*IN*/ ppe_id, cpu_id, virq, outlet, 0 );

Parameters

Inputs
Register	Description
R3	ppe_id - PPE id
R4	cpu_id - PPE CPU id
R5	virq - virtual irq
R6	outlet - HV outlet
R7	0 - unknown
Outputs
Register	Description
R3	Status - 0 = OK, Other values are unknown, but indicate failure.

lv1_release_memory

Releases a previously allocated memory region. Return code is not checked.

Kernel Call

lv1_release_memory( /*IN*/ base );

Parameters

Inputs
Register	Description
R3	base - base address of memory region
Outputs
Register	Description
R3	Status??

lv1_put_iopte

Put an io page table entry.

Kernel Call

result = lv1_put_iopte( /*IN*/ ioas_id, ioif_addr, lpar_addr, io_id, flags );

Parameters

Inputs
Register	Description
R3	ioas_id - io address space id
R4	ioif_addr - io interface address
R5	lpar_addr - logical partition address
R6	io_id - io id
R7	flags - see notes
Outputs
Register	Description
R3	Status??

Notes:

Code taken from kboot-10\dl\linux-2.6.16\sound\powerpc\snd_ps3pf.c (kboot-20061208)

ret64 = lv1_put_iopte(0, /* io address space id */
   ioif_map_info_array[current_segment].ioif_addr + current_page * IO_PAGESIZE, /* ioif addr */
   p_to_lp(current_paddr), /* lpar addr */
   PS3PF_AUDIO_IOID, IOPTE_READONLY | IOPTE_COHERENT | IOPTE_STRICT_ORDER);

lv1_disconnect_irq_plug_ext

Disconnect a virtual irq from its HV outlet.

Kernel Call

lv1_disconnect_irq_plug_ext( /*IN*/ ppe_id, cpu_id, virq );

Parameters

Inputs
Register	Description
R3	ppe_id - PPE id
R4	cpu_id - PPE CPU id
R5	virq - virtual irq
R7	flags - see notes
Outputs
Register	Description
R3	Status?

lv1_construct_event_receive_port

Creates an outlet that can be used with a virtual irq to receive system events.

Kernel Call

result = lv1_construct_event_receive_port( /*OUT*/ &outlet );

Parameters

Outputs
Register	Description
R3	Status - 0 = OK, Other values are unknown, but indicate failure.
R4	outlet - event outlet

lv1_destruct_event_receive_port

Destruct a previously constructed event receiving port.

Kernel Call

result = lv1_destruct_event_receive_port( /*IN*/ outlet );

Parameters

Inputs
Register	Description
R3	outlet - event outlet
Outputs
Register	Description
R3	Status - 0 = OK, Other values are unknown, but indicate failure.

lv1_send_event_locally

Signal the specified event.

Kernel Call

result = lv1_send_event_locally( /*IN*/ outlet );

Parameters

Inputs
Register	Description
R3	outlet - event outlet
Outputs
Register	Description
R3	Status - 0 = OK, Other values are unknown, but indicate failure.

lv1_detect_pending_interrupts

Not used in current kernel.

Abstract Call

result = lv1_detect_pending_interrupts( /*IN*/ p1, /*OUT*/ &v1, &v2, &v3, &v4 );

Parameters

Inputs
Register	Description
R3	p1 - unknown
Outputs
Register	Description
R3	Status?
R4	v1 - Unknown
R5	v2 - Unknown
R6	v3 - Unknown
R7	v4 - Unknown

Notes:

Info taken from kboot-10\dl\linux-2.6.16\include\asm-powerpc\lv1calltab.h (kboot-20061208)

lv1_end_of_interrupt

Indicate the end of an interrupt handler has been reached.

kboot Call

result = lv1_end_of_interrupt( /*IN*/ irq );

Parameters

Inputs
Register	Description
R3	irq - interrupt number
Outputs
Register	Description
R3	Status - 0 = OK, Other values are unknown, but indicate failure.

Notes:

Comment in kboot-10\dl\linux-2.6.16\arch\powerpc\platforms\ps3pf\pic.c (kboot-20061208)

/* 
 lv1_end_of_interrupt must be called at end_irq. 
 Some lv1 drivers clear irq status in it.
*/

lv1_connect_irq_plug

Bind a virtual interrupt to a CPU.

kboot Call

result = lv1_connect_irq_plug( /*IN*/ virq, hwirq );

Parameters

Inputs
Register	Description
R3	virq - virtual interrupt
R4	hwirq - hardware interrupt
Outputs
Register	Description
R3	Status - 0 = OK, Other values are unknown, but indicate failure.

Notes:

Info taken from kboot-10/dl/linux-2.6.16/patches/cell-support/2.6.19-rc6-arnd1/ps3-support/ps3-interrupt.patch (kboot-20061208)

lv1_disconnect_irq_plug

Unbind a virtual interrupt from a CPU.

kboot Call

lv1_disconnect_irq_plug( /*IN*/ virq );

Parameters

Inputs
Register	Description
R3	virq - virtual interrupt
Outputs
Register	Description
R3	Status?

Notes:

Info taken from kboot-10/dl/linux-2.6.16/patches/cell-support/2.6.19-rc6-arnd1/ps3-support/ps3-interrupt.patch (kboot-20061208)

lv1_end_of_interrupt_ext

Indicate that the end of an interrupt handler has been reached.

Kernel Call

lv1_end_of_interrupt_ext( /*IN*/ ppe_id, cpu_id, virq );

Parameters

Inputs
Register	Description
R3	ppe_id - PPE id
R4	cpu_id - PPE CPU id
R5	virq - virtual irq
Outputs
Register	Description
R3	Status?

lv1_did_update_interrupt_mask

Indicate that CPU interrupt mask has been updated.

Kernel Call

lv1_did_update_interrupt_mask( /*IN*/ ppe_id, cpu_id );

Parameters

Inputs
Register	Description
R3	ppe_id - PPE id
R4	cpu_id - PPE CPU id
Outputs
Register	Description
R3	Status?

lv1_shutdown_logical_partition

Not used in current kernel.

Abstract Call

result = lv1_shutdown_logical_partition( /*IN*/ p1 );

Parameters

Inputs
Register	Description
R3	p1 - shutdown command (see notes)
Outputs
Register	Description
R3	Status?

Notes:

Comment from kboot-10/dl/linux-2.6.16/include/asm-powerpc/lv1call.h (kboot-20061208)

/* values for lv1_shutdown_logical_partition */
#define LV1_SHUTDOWN_LP_HALT		1
#define LV1_SHUTDOWN_LP_POWER_OFF	2
#define LV1_SHUTDOWN_LP_RESTART	3

lv1_destruct_logical_spe

Destructs a logical SPE.

Kernel Call

result = lv1_destruct_logical_spe( /*IN*/ spe_id );

Parameters

Inputs
Register	Description
R3	spe_id - spe id
Outputs
Register	Description
R3	Status - 0 = OK, Other values are unknown, but indicate failure.

lv1_construct_logical_spe

Constructs a logical SPE.

Kernel Call

status = lv1_construct_logical_spe( /*IN*/ PAGE_SHIFT, PAGE_SHIFT, PAGE_SHIFT, PAGE_SHIFT, PAGE_SHIFT, vas_id, SPE_TYPE_LOGICAL,
		/*OUT*/ &priv2_addr, &problem_phys, &local_store_phys, &unused, &shadow_addr, &spe_id );

Parameters

R3

Inputs
Register	Description
R3	PAGE_SHIFT
R4	PAGE_SHIFT
R5	PAGE_SHIFT
R6	PAGE_SHIFT
R7	PAGE_SHIFT
R8	vas_id - virtual address space id
R9	SPE_TYPE_LOGICAL (0)
Outputs
Register	Description
Status - 0 = OK, Other values are unknown, but indicate failure.
R4	priv2_addr - lpar address of spe priv2 area
R5	problem_phys - lpar address of spu_problem area
R6	local_store_phys - lpar address of spu local storage
R7	unused
R8	shadow_addr - lpar address of spe register shadow area
R9	spe_id - logical spe id

Notes:

R7 out parameter was referred to in a previous codebase as “ctxt_addr”.

Test Results

priv2_addr	problem_phys	local_store_phys	unused	shadow_addr	spe_id
0x4c0000660000	0x4c0000640000	0x4c0000600000	0×0	0x30000000d000	11
0x4c0000760000	0x4c0000740000	0x4c0000700000	0×0	0x30000000f000	15
0x4c0000860000	0x4c0000840000	0x4c0000800000	0×0	0×300000011000	19
0x4c0000960000	0x4c0000940000	0x4c0000900000	0×0	0×300000013000	23
0x4c0000a60000	0x4c0000a40000	0x4c0000a00000	0×0	0×300000015000	27
0x4c0000b60000	0x4c0000b40000	0x4c0000b00000	0×0	0×300000017000	31

For each entry, only two separate lpar are allocated by the hypervisor. Indeed, calling lv1_query_logical_partition_address_region_info on priv2_addr, problem_phys, local_store_phys and shadow_addr for the first entry returns the following info:

0x4c0000660000

lpar	start_address	size	access_right	max_page_size	flags	comment
0x4c0000600000	524288	0×3 (RW)	12	0xa000000000000000	SPU MMIO lpar, privilege state 2 region (128kB)
0x4c0000640000	0x4c0000600000	524288	0×3 (RW)	12	0xa000000000000000	SPU MMIO lpar, problem state region (128kB)
0x4c0000600000	0x4c0000600000	524288	0×3 (RW)	12	0xa000000000000000	SPU MMIO lpar, local store region (256kB)
0x30000000d000	0x30000000d000	4096	0×1 (RO)	12	0xa000000000000000	SPU shadow registers lpar (4kB, read-only)

From this info we see a single lpar is used for all the SPU MMIO region (see figure 5-1 CBE Memory Map of the Cell Broadband Engine Programming Handbook) and another lpar is used for the SPE registers.

lv1_set_spe_interrupt_mask

Set the interrupt mask of a specific spe.

Kernel Call

lv1_set_spe_interrupt_mask( /*IN*/ spe_id, class, mask );

Parameters

Inputs
Register	Description
R3	spe_id - spe id
R4	class - spe interrupt class
R5	mask - spe interrupt mask
Outputs
Register	Description
R3	Status?

lv1_undocumented_function_62

Exists in PAL 1.7; Returned -4 (LV1_DENIED_BY_POLICY) when passed 0 in R3 to R10.

lv1_undocumented_function_63

Does not exist in 3.15.

Exists in PAL 1.7; Returned -4 (LV1_DENIED_BY_POLICY) when passed 0 in R3 to R10.

lv1_set_spe_transition_notifier

Not used in current kernel.

Abstract Call

result = lv1_set_spe_transition_notifier( /*IN*/ p1, p2, p3 );

Parameters

Inputs
Register	Description
R3	spe_id - logical spe id
R4	0 - Unknown usage
Outputs
Register	Description
R3	Status - 0 = OK, Other values are unknown, but indicate failure.

lv1_disable_logical_spe

Disables a logical SPE.

Kernel Call

result = lv1_disable_logical_spe( /*IN*/ spe_id, 0 );

Parameters

Inputs
Register	Description
R3	spe_id - logical spe id
R4	0 - Unknown usage
Outputs
Register	Description
R3	Status - 0 = OK, Other values are unknown, but indicate failure.

lv1_clear_spe_interrupt_status

Clear the interrupt status of a specific spe.

Kernel Call

lv1_clear_spe_interrupt_status( /*IN*/ spe_id, class, stat, 0 );

Parameters

Inputs
Register	Description
R3	spe_id - logical spe id
R4	class - spe interrupt class
R5	stat - new interrupt status?
R6	0 - Unknown
Outputs
Register	Description
R3	Status?

lv1_get_spe_interrupt_status

Get the interrupt status of a specific spe.

Kernel Call

lv1_get_spe_interrupt_status( /*IN*/ spe_id, class, /*OUT*/ &stat );

Parameters

Inputs
Register	Description
R3	spe_id - logical spe id
R4	class - spe interrupt class
Outputs
Register	Description
R3	Status?
R4	stat - interrupt status

lv1_get_logical_ppe_id

Returns the logical PPE id.

Kernel Call

status = lv1_get_logical_ppe_id( /*OUT*/ &ppe_id );

Parameters

Outputs
Register	Description
R3	Status?
R4	logical PPE id

Notes:

When called from kernel module init function, ppe_id always seem to be 1.

lv1_set_interrupt_mask

Not used in current kernel.

Abstract Call

result = lv1_set_interrupt_mask( /*IN*/ p1, p2, p3, p4, p5 );

Parameters

Inputs
Register	Description
R3	p1 - Unknown
R4	p2 - Unknown
R5	p3 - Unknown
R6	p4 - Unknown
R7	p5 - Unknown
Outputs
Register	Description
R3	Status?

lv1_get_logical_partition_id

Called during Kernel setup.

The single output parameter, logical partition id, is later used as a parameter to call other Hypervisor functions.

Kernel Call

result = lv1_get_logical_partition_id(/*OUT*/ &lp_id );

Parameters

Outputs
register	Description
R3	result: 0 = LV1_SUCCESS
R4	lp_id - logical partition id

Notes:

When called from kernel module init function, lp_id always seems to be 2.

The “read_node” function contained in “repository.c” is passed a parameter, lpar_id (logical partition id). If lpar_id is equal to PS3_LPAR_ID_CURRENT (0) then lv1_get_logical_partition_id is called to retrieve the current logical partition id. Any other value for lpar_id is passed directly to the following HV calls, though the only other value in use appears to be PS3_LPAR_ID_PME (1)

lv1_undocumented_function_75

Exists in PAL 1.7; Returned 0 (LV1_SUCCESS) when passed 0 in R3 to R10.

lv1_configure_execution_time_variable

Not used in current kernel.

Abstract Call

result = lv1_configure_execution_time_variable( /*IN*/ p1 );

Parameters

Inputs
Register	Description
R3	p1 - Unknown
Outputs
Register	Description
R3	Status?

lv1_get_spe_irq_outlet

Get an IRQ outlet of a certain class from the specified SPE.

Kernel Call

result = lv1_get_spe_irq_outlet( /*IN*/ spe_id, class, /*OUT*/ &outlet );

Parameters

Inputs
Register	Description
R3	spe_id - logical spe id
R4	class - spe interrupt class (0, 1 or 2)
Outputs
Register	Description
R3	Status - 0 = OK, Other values are unknown, but indicate failure.
R4	outlet - irq outlet

SPE Interrupt Class:

Class	Description	Examples
0	Errors	SPE errors, DMA errors, DMA alignment errors
1	DMA translation exceptions	MFC page faults, segment faults
2	Application events	SPE stop and signal, DMA completion interrupt, mailbox interrupts

lv1_set_spe_privilege_state_area_1_register

Sets a register in SPE privilege area 1.

Kernel Call

lv1_set_spe_privilege_state_area_1_register( /*IN*/ spe_id, offset, value );

Parameters

Inputs
Register	Description
R3	spe_id - spe id
R4	offset - register offset, 0, 0x600, 0x710, 0x808, 0x820
R5	value - register value
Outputs
Register	Description
R3	Status?

lv1_undocumented_function_89

Exists in PAL 1.7; Returned -6 (LV1_NO_ENTRY) when passed 0 in R3 to R10.

lv1_create_repository_node

The repository appears to be an area of storage for use by the Hypervisor.

Abstract Call

status = lv1_create_repository_node(/*IN*/ n1, n2, n3, n4, v1, v2 );

Parameters

Inputs
Register	Description
R3	top level key
R4	2nd level key
R5	3rd level key
R6	4th level key
R7	value 1
R8	value 2
Outputs
Register	Description
R3	Status - 0 = OK, Other values are unknown, but indicate failure.

Notes:

This call is not used within the current Kernel, so the parameter list is based on speculation. It will still return 0 if the specified node already exists, and it will not change current data.

See “lv1_get_repository_node_value” for an example of actual key/value usage within the Kernel.

lv1_get_repository_node_value

The repository appears to be an area of storage for use by the Hypervisor. 256-bit keys are used to reference 128-bit values stored in the repository. Functions exist to create, get, modify and remove repository nodes.

See notes below for usage speculation.

Kernel Call

status = lv1_get_repository_node_value(/*IN*/ lpar_id, n1, n2, n3, n4 /*OUT*/ &v1, &v2 );

Parameters

Inputs
Register	Description
R3	logical partion id
R4	top level key
R5	2nd level key
R6	3rd level key
R7	4th level key
Outputs
Register	Description
R3	Status: 0 = OK, -6 = LV1_NO_ENTRY
R4	value 1
R5	value 2

Notes:

The logical partition id is also required as an input parameter to get a repository node value, but this parameter does not appear to be passed when creating, modifying or removing nodes.

There are instances in the Kernel code where the keys are constructed from string values, which appear to follow a 4-level key/subkey hierarchy.

Test Results

Calling lv1_get_repository_node_value for the node ‘bi.pu.#1.rm_size’ produces the following result:

bi.pu.(1).rm_size - Real mode memory size
Register	Hex Value	Value	Comment
R3	0000000000000002	(2)	PS3_LPAR_ID_CURRENT
R4	0000000062690000	....bi..	boot info?
R5	7075000000000000	pu......	processor unit
R6	0000000000000001	........	pu id (1)
R7	726d5f73697a6500	rm_size.	real mode size
Outputs
R3	0000000000000000	(0)	LV1_SUCCESS
R4	0000000008000000	(134217728)	128 Mb
R5	0000000000000000	(0)

Other nodes referenced in “repository.c”:

lpar_id = PS3_LPAR_ID_CURRENT (0×2)
Node	v1	v2	Comment
bi.spun.#0.#0	0000000000000006 (6)	0 (0)	number of physical spus reserved
bi.spursvn.#0.#0	0000000000000006 (6)	0 (0)	number of spu resource reservations
bi.spursv.(0..5).#0	8000000000000000 (PS3_SPU_RESOURCE_TYPE_EXCLUSIVE)	(0..5)	spu resource reservation id value
bi.boot_dat.address.#0	0000000007fff000 (134213632)	0 (0)	boot data address
bi.boot_dat.size.#0	0000000000000800 (2048)	0 (0)	boot data size
bi.pu.(1).rm_size	0000000008000000 (134217728)	0 (0)	real mode limit
bi.rgntotal.#0.#0	000000000f800000 (260046848)	0 (0)	max memory size

lpar_id = PS3_LPAR_ID_PME (0×1)
Node	v1	v2	Comment
ben.#0.#0.#0	0000000000000001 (1)	0000000000000000 (0)	Unused - in function “ps3_repository_read_num_be”
be(0).#0.#0.#0	0000000000000000 (0)	0000000000000000 (0)	be node id (used to retrieve clock freq)
be.(0).clock.#0	0000000004c1a6c0 (79800000)	0000000000000000 (0)	decrementer frequency (3.2 Ghz / 40)

lpar_id = PS3_LPAR_ID_PME (0×1) - FW 3.15 PAL 60GB PS3, First Generation (Fat)
Node	v1	v2	Comment
sys.flash.fmt.#0	00000000000001 (1)	00000000000000 (0)	Flash format. v1: 1 = NAND , 2 = VFLASH?
sys.hw.config.#0	20000000fffffeff	00000000000000 (0)	0×20000000000000 mask + something
sys.flash.ext.#0	000000000000ff (255)	00000000000000 (0)	–
plat.id.#0.#0	436f6b4231300000 (ASCII‘CokB10’)	00000000000000 (0)	Platform ID
sys.ac.sd.#0	00000000000000 (0)	00000000000000 (0)	–
sys.flash.boot.#0	00000000000000 (0)	00000000000000 (0)	–
be.0.lpm.priv	00000000000002 (2)	00000000780101 (7864577)	–
rsx.rdcy.1.#0	ffff0d020a02ffff	00000000000000 (0)	–
rsx.rdcy.2.#0	ffffffffffffffff	00000000000000 (0)	–
rsx.rdcy.3.#0	00000000000000 (0)	00000000000000 (0)	–
rsx.rdcy.4.#0	00000000000000 (0)	00000000000000 (0)	–
rsx.rdcy.5.#0	00000000000000 (0)	00000000000000 (0)	–
rsx.rdcy.6.#0	00000000000000 (0)	00000000000000 (0)	–
rsx.rdcy.7.#0	00000000000000 (0)	00000000000000 (0)	–
rsx.rdcy.8.#0	00000000000000 (0)	00000000000000 (0)	–
mu.1.size.#0	00000010000000 (268435456)	00000000000000 (0)	–
be.0.tb_clk.#0	00000004c1a6c0 (79800000)	00000000000000 (0)	–
be.0.nclk.#0	000000be420e00 (3192000000)	00000000000000 (0)	–
ios.net.eurus.lpar	00000000000000 (0)	00000000000000 (0)	–
sys.syscon.pversion.#0	00000000000001 (1)	00000000000000 (0)	–
sys.param.load.rom1st	00000000000001 (1)	00000000000000 (0)	–
lv1.maxplgid.#0.#0	00000000000100 (256)	00000000000000 (0)	–
lv1.specver.#0.#0	00000300010005	00000000000000 (0)	Matches firmware 3.1.5
lv1.buildid.#0.#0	00000000000000 (0)	00000000000000 (0)	–
lv1.ts.size.#0	00000000000000 (0)	00000000000000 (0)	–
lv1.ts.start.#0	00000010000000 (268435456)	00000000000000 (0)	–

lv1_modify_repository_node_value

The repository appears to be an area of storage for use by the Hypervisor.

Abstract Call

status = lv1_modify_repository_node_value(/*IN*/ n1, n2, n3, n4, v1, v2 );

Parameters

Inputs
Register	Description
R3	top level key
R4	2nd level key
R5	3rd level key
R6	4th level key
R7	value 1
R8	value 2
Outputs
Register	Description
R3	Status - 0 = OK, Other values are unknown, but indicate failure.

Parameter list based on speculation. Not used in current Kernel.

lv1_remove_repository_node

The repository appears to be an area of storage for use by the Hypervisor.

Abstract Call

status = lv1_remove_repository_node( /*IN*/ n1, n2, n3, n4 );

Parameters

Inputs
Register	Description
R3	top level key
R4	2nd level key
R5	3rd level key
R6	4th level key
Outputs
Register	Description
R3	Status - 0 = OK, Other values are unknown, but indicate failure.

Parameter list based on speculation. Not used in current Kernel.

lv1_read_htab_entries

Not used in current Kernel.

Abstract Call

result = lv1_read_htab_entries( /*IN*/ p1, p2, /*OUT*/ &v1, &v2, &v3, &v4, &v5 );

Parameters

Inputs
Register	Description
R3	p1 - vas_id
R4	p2 - offset
Outputs
Register	Description
R3	Status?
R4	v1 - unknown
R5	v2 - unknown
R6	v3 - unknown
R7	v4 - unknown
R8	v5 - unknown

Notes: offset is 64-bit indexed. r4-r7 seem to be right from the htab. r8 is 16-bit indexed reading from something 0xFFFB is max offset

lv1_set_dabr

Sets dabr (data address breakpoint register) - an exception should be thrown upon access to data at this address (range?)

Kernel Call

result = lv1_set_dabr( /*IN*/ dabr, DABR_KERNEL | DABR_USER);

Parameters

Inputs
Register	Description
R3	dabr - data address
R4	DABR_USER) - see notes
Outputs
Register	Description
R3	Status - 0 = OK, Other values are unknown, but indicate failure.

Notes:

DABR_KERNEL and DABR_USER are defined in “setup.c” as follows

enum {DABR_USER = 1, DABR_KERNEL = 2,};

lv1_set_vmx_graphics_mode

Set the Single Precision mode of the vmx graphics units in the PPU

Abstract Call

result = lv1_set_vmx_graphics_mode( mode );

Parameters

Inputs
Register	Description
R3	mode - 0 = IEEE 754-1985 SIMD rounding mode for VMX/Altivec Instructions
	mode - 1 = SPE-compatible SIMD graphics-rounding mode for VMX/Altivec Instructions
Outputs
Register	Description
R3	result: 0 = LV1_SUCCESS, -17 = LV1_ILLEGAL_PARAMETER_VALUE

Notes:

This is a call to set the single precision rounding mode of the VMX units in the Cell PPUs. The AltiVec/VMX SIMD/Vector processing unit has 2 rounding modes for dealing with Single-precision floating-point. IEEE 754-1985 and SPE-compatible SIMD graphics-rounding mode.

The Cell Broadband Engine Programming Handbook has this to say on the subject: The first implementation of the Cell Broadband Engine Architecture (CBEA) (the CBE processor) supports instructions with a graphics rounding mode. This mode allows programs written with vector/SIMD multimedia extension instructions to produce floating-point results that are equivalent in precision to those written in the SPU instruction set. In this mode, as in the SPU environment, the default rounding mode is round to zero, denormals are treated as zero, and there are no infinities or NaNs.

To change this mode, bit 12 in the HID1 register (known as grap_md or grap_mode in various documents). HID1 is a HV privileged resource, hence to change the mode from Supervisor mode requires a HV call.

Reference Documents: Cell Broadband Engine Programming Handbook V1.1 Cell Broadband Engine Registers V1.5

Tests:

Info taken from kboot-10\dl\linux-2.6.16\include\asm-powerpc\lv1calltab.h (kboot-20061208)

When recompiled into Kernel module init function, accepts values of 0 and 1 for p1. All other values return -17 (LV1_ILLEGAL_PARAMETER_VALUE)

lv1_set_thread_switch_control_register

Not used in current Kernel.

Abstract Call

result = lv1_set_thread_switch_control_register( /*IN*/ p1 );

Parameters

Inputs
Register	Description
R3	p1 - Unknown
Outputs
Register	Description
R3	Status?

Notes:

Info taken from kboot-10\dl\linux-2.6.16\include\asm-powerpc\lv1calltab.h (kboot-20061208)

lv1_undocumented_function_99

Exists in PAL 1.7; Returned -4 (LV1_DENIED_BY_POLICY) when passed 0 in R3 to R10.

lv1_undocumented_function_102

Exists in PAL 1.7; Returned 0 (LV1_SUCCESS) and R4 = 0x692F5D1E7h when passed 0 in R3 to R10.

lv1_get_total_execution_time

Not used in current kernel. Does not exist in 3.15 HV dump.

Abstract Call

result = lv1_get_total_execution_time( /*IN*/ p1, p2, /*OUT*/ &v1 );

Parameters

Inputs
Register	Description
R3	p1 - Unknown
R4	p2 - Unknown
Outputs
Register	Description
R3	Status?
R4	v1 - Unknown

Notes:

I always get LV1_NOT_IMPLEMENTED

lv1_undocumented_function_105

Exists in PAL 1.7. Returns -17 (LV1_ILLEGAL_PARAMETER_VALUE, 0, 0, C000000000537EF8h, F09B89AF5001h, 6C0061D8E190h, C0000000008DF718h, F09B89AF5001h, when passed 0 in R3 to R10.

lv1_undocumented_function_106

Exists in PAL 1.7. Returns the same as lv1_undocumented_function_105.

lv1_undocumented_function_107

Exists in PAL 1.7. Returns the same as lv1_undocumented_function_105.

lv1_undocumented_function_108

Exists in PAL 1.7. Returns the same as lv1_undocumented_function_105.

lv1_undocumented_function_109

Exists in PAL 1.7. Returns the same as lv1_undocumented_function_105.

lv1_undocumented_function_110

Exists in PAL 1.7. Returns -6 (LV1_NO_ENTRY) in R3, rest same as lv1_undocumented_function_105.

lv1_undocumented_function_111

Exists in PAL 1.7. Returns -6 (LV1_NO_ENTRY) in R3, rest same as lv1_undocumented_function_105.

lv1_undocumented_function_112

Exists in PAL 1.7. Returns -6 (LV1_NO_ENTRY) in R3, rest same as lv1_undocumented_function_105.

lv1_undocumented_function_114

Exists in PAL 1.7. Returns -17 (LV1_ILLEGAL_PARAMETER_VALUE) in R3, 0 in R4-R10. Passed 0 in R3 to R10.

lv1_undocumented_function_115

Exists in PAL 1.7. Returns -8 (LV1_TYPE_MISMATCH) in R3, 0 in R4-R10. Passed 0 in R3 to R10.

lv1_allocate_io_segment

Allocate an io segment.

kboot Call

result = lv1_allocate_io_segment( /*IN*/ ioas_id, segment_size, io_page_size, /*OUT*/ &ioif_addr );

Parameters

Inputs
Register	Description
R3	ioas_id - io address space id
R4	segment_size - io segment size
R5	io_page_size - io page size, 0xC, 0×10, 0×14
Outputs
Register	Description
R3	Status - 0 = OK, Other values are unknown, but indicate failure.
R4	ioif_addr - io interface address

Notes:

Code taken from kboot-10\dl\linux-2.6.16\sound\powerpc\snd_ps3pf.c (kboot-20061208)

ret64 = lv1_allocate_io_segment(0,           /* io space */
   IO_SEGMENTSIZE, /* segment size */
   IO_PAGESIZE_SHIFT, /* io page size */
   &(ioif_map_info_array[current_segment].ioif_addr));

lv1_release_io_segment

Release an io segment.

kboot Call

result = lv1_release_io_segment( /*IN*/ ioas_id, ioif_addr );

Parameters

Inputs
Register	Description
R3	ioas_id - io address space id
R4	ioif_addr - io interface address
Outputs
Register	Description
R3	Status - 0 = OK, Other values are unknown, but indicate failure.

Notes:

Code taken from kboot-10\dl\linux-2.6.16\sound\powerpc\snd_ps3pf.c (kboot-20061208)

ret64 = lv1_release_io_segment(0, /* io space */
   ioif_map_info_array[current_segment].ioif_addr);

lv1_allocate_ioid

Not used in current kernel.

Abstract Call

result = lv1_allocate_ioid( /*IN*/ p1, /*OUT*/ &v1 );

Parameters

Inputs
Register	Description
R3	SBZ
Outputs
Register	Description
R3	Status?
R4	the ioid

Notes:

Info taken from kboot-10\dl\linux-2.6.16\include\asm-powerpc\lv1calltab.h (kboot-20061208)

lv1_release_ioid

Not used in current Kernel.

Abstract Call

result = lv1_release_ioid( /*IN*/ p1, p2 );

Parameters

Inputs
Register	Description
R3	p1 - Unknown
R4	p2 - Unknown
Outputs
Register	Description
R3	Status?

Notes:

Info taken from kboot-10\dl\linux-2.6.16\include\asm-powerpc\lv1calltab.h (kboot-20061208)

lv1_construct_io_irq_outlet

Construct an outlet for a non-virtualized device interrupt.

Kernel Call

result = lv1_construct_io_irq_outlet( /*IN*/ interrupt_id, /*OUT*/ &outlet );

Parameters

Inputs
Register	Description
R3	interrupt_id - interrupt id
Outputs
Register	Description
R3	Status - 0 = OK, Other values are unknown, but indicate failure.
R4	outlet - interrupt outlet

lv1_destruct_io_irq_outlet

Destruct a previously constructed device interrupt outlet.

Kernel Call

result = lv1_destruct_io_irq_outlet( /*IN*/ outlet );

Parameters

Inputs
Register	Description
R3	outlet - interrupt outlet
Outputs
Register	Description
R3	Status - 0 = OK, Other values are unknown, but indicate failure.

lv1_map_htab

Map the hash page table.

Kernel Call

result = lv1_map_htab( /*IN*/ 0, /*OUT*/ &htab_addr );

Parameters

Inputs
Register	Description
R3	0 - Unknown (lpid?)
Outputs
Register	Description
R3	Status?
R4	htab_addr - hash page table address

Notes:

In “htab.c” return code is assigned, but not used. Must be translated and ioremapped before it can be used in the kernel. It’s 1MB long

lv1_unmap_htab

Unmap the hash page table.

Kernel Call

lv1_unmap_htab( /*IN*/ htab_addr );

Parameters

Inputs
Register	Description
R3	htab_addr - hash page table address
Outputs
Register	Description
R3	Status?

lv1_undocumented_function_124

Exists in PAL 1.7. Returns -6 (LV1_NO_ENTRY) in R3, rest same as lv1_undocumented_function_105.

lv1_undocumented_function_125

Exists in PAL 1.7. Returns -6 (LV1_NO_ENTRY) in R3, rest same as lv1_undocumented_function_105.

lv1_undocumented_function_126

Exists in PAL 1.7. Returns -6 (LV1_NO_ENTRY) in R3, rest same as lv1_undocumented_function_105.

lv1_get_version_info

Returns PS3 firmware version information.

Kernel Call

result = lv1_get_version_info( /*OUT*/ &raw );

Parameters

Outputs
Register	Description
R3	Status - 0 = OK, Other values are unknown, but indicate failure.
R4	raw - firmware data (see notes)

Notes:

The firmware information is accessed using the following union:

union ps3_firmware_version {
	u64 raw;
	struct {
		u16 pad;
		u16 major;
		u16 minor;
		u16 rev;
	};
};

lv1_undocumented_function_134

Exists in PAL 1.7. Returns 0 when passed R3-R10=0.

lv1_undocumented_function_135

Exists in PAL 1.7. Returns -6 (LV1_NO_ENTRY) in R3, rest same as lv1_undocumented_function_105.

lv1_undocumented_function_136

Exists in PAL 1.7. Returns -6 (LV1_NO_ENTRY) in R3, rest same as lv1_undocumented_function_105.

lv1_undocumented_function_137

Exists in PAL 1.7. Returns -4 (LV1_DENIED_BY_POLICY) when passed 0 in R3-R10.

lv1_undocumented_function_138

Exists in PAL 1.7. Returns -4 (LV1_DENIED_BY_POLICY) when passed 0 in R3-R10.

lv1_construct_lpm

Not used in current kernel.

Abstract Call

result = lv1_construct_lpm( /*IN*/ p1, p2, p3, p4, p5, p6, /*OUT*/ &v1, &v2, &v3 );

Parameters

Inputs
Register	Description
R3	p1 - node_id, this is the node id of the processor, 0 is only valid value
R4	p2 - tb_type, 0 is none, 1 is internal
R5	p3 - Unknown, is 0
R6	p4 - Unknown, is 0
R7	p5 - tb_cache in lpar, 128 byte aligned
R8	p6 - tb_cache_size
Outputs
Register	Description
R3	Status
R4	v1 - lpm_id
R5	v2 - outlet_id
R6	v3 - tb_size

lv1_destruct_lpm

Not used in current kernel.

Abstract Call

result = lv1_destruct_lpm( /*IN*/ p1 );

Parameters

Inputs
Register	Description
R3	p1 - lpm_id
Outputs
Register	Description
R3	Status?

lv1_start_lpm

Not used in current kernel.

Abstract Call

result = lv1_start_lpm( /*IN*/ p1 );

Parameters

Inputs
Register	Description
R3	p1 - lpm_id
Outputs
Register	Description
R3	Status?

lv1_stop_lpm

Not used in current kernel.

Abstract Call

result = lv1_stop_lpm( /*IN*/ p1, /*OUT*/ &v1 );

Parameters

Inputs
Register	Description
R3	p1 - Unknown
Outputs
Register	Description
R3	Status?
R4	v1 - Unknown

lv1_copy_lpm_trace_buffer

Not used in current kernel.

Abstract Call

result = lv1_copy_lpm_trace_buffer( /*IN*/ p1, p2, p3 /*OUT*/ &v1 );

Parameters

Inputs
Register	Description
R3	p1 - lpm_id
R3	p2 - offset
R3	p3 - request
Outputs
Register	Description
R3	Status
R4	v1 - tmp

lv1_add_lpm_event_bookmark

Not in current kernel.

Abstract Call

result = lv1_add_lpm_event_bookmark( /*IN*/ p1, p2, p3, p4, p5 );

Parameters

Inputs
Register	Description
R3	p1 - Unknown
R3	p2 - Unknown
R3	p3 - Unknown
R6	p4 - Unknown
R7	p5 - Unknown
Outputs
Register	Description
R3	Status?

lv1_delete_lpm_event_bookmark

Not used in current kernel.

Abstract Call

result = lv1_delete_lpm_event_bookmark( /*IN*/ p1, p2, p3 );

Parameters

Inputs
Register	Description
R3	p1 - Unknown
R3	p2 - Unknown
R3	p3 - Unknown
Outputs
Register	Description
R3	Status?

lv1_set_lpm_interrupt_mask

Not used in current kernel.

Abstract Call

result = lv1_set_lpm_interrupt_mask( /*IN*/ p1, p2, p3, /*OUT*/ &v1 );

Parameters

Inputs
Register	Description
R3	p1 - Unknown
R3	p2 - Unknown
R3	p3 - Unknown
Outputs
Register	Description
R3	Status?
R4	v1 - Unknown

lv1_get_lpm_interrupt_status

Not used in current kernel.

Abstract Call

result = lv1_get_lpm_interrupt_status( /*IN*/ p1, /*OUT*/ &v1 );

Parameters

Inputs
Register	Description
R3	p1 - Unknown
Outputs
Register	Description
R3	Status?
R4	v1 - Unknown

lv1_set_lpm_general_control

Not used in current kernel.

Abstract Call

result = lv1_set_lpm_general_control( /*IN*/ p1, p2, p3, p4, p5, /*OUT*/ &v1, &v2 );

Parameters

Inputs
Register	Description
R3	p1 - Unknown
R4	p2 - Unknown
R5	p3 - Unknown
R6	p4 - Unknown
R7	p5 - Unknown
Outputs
Register	Description
R3	Status?
R4	v1 - Unknown
R5	v2 - Unknown

lv1_set_lpm_interval

Not used in current kernel.

Abstract Call

result = lv1_set_lpm_interval( /*IN*/ p1, p2, p3, /*OUT*/ &v1 );

Parameters

Inputs
Register	Description
R3	p1 - Unknown
R4	p2 - Unknown
R5	p3 - Unknown
Outputs
Register	Description
R3	Status?
R4	v1 - Unknown

lv1_set_lpm_trigger_control

Not used in current kernel.

Abstract Call

result = lv1_set_lpm_trigger_control( /*IN*/ p1, p2, p3, /*OUT*/ &v1 );

Parameters

Inputs
Register	Description
R3	p1 - Unknown
R4	p2 - Unknown
R5	p3 - Unknown
Outputs
Register	Description
R3	Status?
R4	v1 - Unknown

lv1_set_lpm_counter_control

Not used in current kernel.

Abstract Call

result = lv1_set_lpm_counter_control( /*IN*/ p1, p2, p3, p4, /*OUT*/ &v1 );

Parameters

Inputs
Register	Description
R3	p1 - Unknown
R4	p2 - Unknown
R5	p3 - Unknown
R6	p4 - Unknown
Outputs
Register	Description
R3	Status?
R4	v1 - Unknown

lv1_set_lpm_group_control

Not used in current kernel.

Abstract Call

result = lv1_set_lpm_group_control( /*IN*/ p1, p2, p3, /*OUT*/ &v1 );

Parameters

Inputs
Register	Description
R3	p1 - Unknown
R4	p2 - Unknown
R5	p3 - Unknown
Outputs
Register	Description
R3	Status?
R4	v1 - Unknown

lv1_set_lpm_debug_bus_control

Not used in current kernel.

Abstract Call

result = lv1_set_lpm_debug_bus_control( /*IN*/ p1, p2, p3, /*OUT*/ &v1 );

Parameters

Inputs
Register	Description
R3	p1 - Unknown
R4	p2 - Unknown
R5	p3 - Unknown
Outputs
Register	Description
R3	Status?
R4	v1 - Unknown

lv1_set_lpm_counter

Not used in current kernel.

Abstract Call

result = lv1_set_lpm_counter( /*IN*/ p1, p2, p3, p4, p5, /*OUT*/ &v1, &v2 );

Parameters

Inputs
Register	Description
R3	p1 - Unknown
R4	p2 - Unknown
R5	p3 - Unknown
R6	p4 - Unknown
R7	p5 - Unknown
Outputs
Register	Description
R3	Status?
R4	v1 - Unknown
R5	v2 - Unknown

lv1_set_lpm_signal

Not used in current kernel.

Abstract Call

result = lv1_set_lpm_signal( /*IN*/ p1, p2, p3, p4, p5, p6, p7 );

Parameters

Inputs
Register	Description
R3	p1 - Unknown
R4	p2 - Unknown
R5	p3 - Unknown
R6	p4 - Unknown
R7	p5 - Unknown
R8	p6 - Unknown
R9	p7 - Unknown
Outputs
Register	Description
R3	Status?

lv1_set_lpm_spr_trigger

Not used in current kernel.

Abstract Call

result = lv1_set_lpm_spr_trigger( /*IN*/ p1, p2 );

Parameters

Inputs
Register	Description
R3	p1 - Unknown
R4	p2 - Unknown
Outputs
Register	Description
R3	Status?

lv1_insert_htab_entry

Used in current kernel.

Kernel Call

result = lv1_insert_htab_entry( /*IN*/ p1, p2, p3, p4, p5, p6, /*OUT*/ &v1, &v2, &v3 );

Parameters

Inputs
Register	Description
R3	p1 - htab ID, 0 or returns -6
R4	p2 - hpte_group, 0 or returns -17
R5	p3 - hpte_v
R6	p4 - hpte_r
R7	p5 - Bolted flag
R8	p6 - flags?
Outputs
Register	Description
R3	Status?
R4	v1 - inserted_index
R5	v2 - evicted_v
R6	v3 - evicted_r

Notes: Kernel usage:

result = lv1_insert_htab_entry(PS3_LPAR_VAS_ID_CURRENT, hpte_group,
				       hpte_v, hpte_r,
				       HPTE_V_BOLTED, 0,
				       &inserted_index,
				       &evicted_v, &evicted_r);

HV Syscall Reference

HV Syscalls

lv1_allocate_memory

Kernel Call

Parameters

lv1_write_htab_entry

Kernel Call

Parameters

lv1_construct_virtual_address_space

Kernel Call

Parameters

lv1_invalidate_htab_entries

Abstract Call

Parameters

lv1_get_virtual_address_space_id_of_ppe

Kernel Call

Parameters

lv1_query_logical_partition_address_region_info

Kernel Call

Parameters

Test Results

lv1_select_virtual_address_space

Kernel Call

Parameters

lv1_undocumented_function_8

lv1_pause

Kernel Call

Parameters

lv1_destruct_virtual_address_space

Kernel Call

Parameters

lv1_configure_irq_state_bitmap

Kernel Call

Parameters

lv1_connect_irq_plug_ext

Kernel Call

Parameters

lv1_release_memory

Kernel Call

Parameters

lv1_put_iopte

Kernel Call

Parameters

lv1_disconnect_irq_plug_ext

Kernel Call

Parameters

lv1_construct_event_receive_port

Kernel Call

Parameters

lv1_destruct_event_receive_port

Kernel Call

Parameters

lv1_send_event_locally

Kernel Call

Parameters

lv1_detect_pending_interrupts

Abstract Call

Parameters

lv1_end_of_interrupt

kboot Call

Parameters

lv1_connect_irq_plug

kboot Call

Parameters

lv1_disconnect_irq_plug

kboot Call

Parameters

lv1_end_of_interrupt_ext

Kernel Call

Parameters

lv1_did_update_interrupt_mask

Kernel Call

Parameters

lv1_shutdown_logical_partition

Abstract Call

Parameters

lv1_destruct_logical_spe

Kernel Call

Parameters

lv1_construct_logical_spe