ENCDEC Device Reverse Engineering

Introduction

• The following information was reverse engineered from LV1, Storage Manager in LPAR1, sb_iso_spu_module.self and sv_iso_spu_module.self.

Linux Driver ps3encdec

• I'm using this driver to set/clear my ATA and VFLASH keys.
• Tested on Linux 3.5.1.

Establish Secure Communication Channel

• First host and ENCDEC device exchange random numbers.
• From the exchanged random numbers host and ENCDEC device compute the session key.
• ENCDEC commands, e.g. to set ATA keys, are encrypted with the session key and AES-CBC-192.
• Before a secure communication channel is established, host and ENCDEC device use static AES-CBC-192 keys to encrypt communication data. The static keys can be found e.g. in sb_iso_spu_module.self or sv_iso_spu_module.self.
• Static ENCDEC keys depend on SB bus version. To get your SB bus version, read v2 of repository node SB bus id.
• During the communication, host and ENCDEC device use random IVs which are sent unencrypted together with encrypted payload.