Strings:bootldr dump

From PS3 Developer wiki
Revision as of 23:12, 24 November 2013 by Zecoxao (talk | contribs) (Created page with "<pre> Boot Loader SE Version 2.7.0 (Build ID: 3517,38879, Build Date: 2009-03-24_23:51:55) Copyright(C) 2009 Sony Computer Entertainment Inc.All Rights Reserved. updater ban...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search 
Boot Loader SE Version 2.7.0 
(Build ID: 3517,38879, 
Build Date: 2009-03-24_23:51:55)
Copyright(C) 2009 Sony Computer Entertainment Inc.All Rights Reserved.
updater
bank_indicator
lv0_bank0
lv0_bank1
ros0
ros1
[ERROR]: config_ring cmp fail bit %d, actual 0x%02x, expect 0x%02x
fX[ERROR]: 0x%08x lv0 not found
[ERROR]: 0x%08x lv0 authentication fail
[ERROR]: 0x%08x get_eeprom_os_bank_indicator %d
[ERROR]: 0x%08x get_eeprom_bootrom_diag fail %d
[ERROR]: 0x%08x get_eeprom_boot_fir_config %d
[ERROR]: 0x%08x get_eeprom_update_flag %d
[ERROR]: 0x%08x get_eeprom_select_net_device %d
CP ch4
SB UART
[DEBUG]: get livelock version fail %d
[DEBUG]: get livelock version %04x is lower than %04x
[DEBUG]: set livelock detection mode fail %d
[INFO] %s type %d
[INFO]: flash format 2
[ERROR]: 0x%08x invalid flash format version %04x, format_version %04x
[INFO]: flash format 1_1
[INFO]: flash format 1
[ERROR]: 0x%08x %s: ERROR src < config::sb_rom_base
[ERROR]: 0x%08x %s: ERROR SS2_WORK FULL offset(%016llx)
[ERROR]: 0x%08x %s: read_sectors_dma fail %d
[INFO]: Connecting to Debug Device (%s)
[ERROR]: CBE version unknown.
[ERROR]: >>> XDR Init: Not Configured <<<
[ERROR]: Designated target FB_ADJ is invalid.
[ERROR]: Designated XDR DRAM Prog.Width is invalid.
[ERROR]: 0x%08x (FATAL) unable to set up memory configuration parameter.
[ERROR]: 0x%08x (FATAL) XDR Init not performed due to invalid parameter.
[ERROR]: 0x%08x (FATAL) XDR Link not initilized.
[INFO]: XDR Link successfully initilized.
[INFO]: memory diag (mode %d, %d)
[ERROR]: 0x%08x (FATAL) memory diag fail
[ERROR]: 0x%08x (FATAL) memory_diag fail.
[ERROR]: 0x%08x get_eeprom_bootrom_trace_leve fail %d
[ERROR]: 0x%08x get_reference_clock fail
[ERROR]: 0x%08x Invalid be_ref_clk %08x or ref_div %08llx
[ERROR]: 0x%08x sc_protocol_version %d
get_boot_memory_type
copy_to_main_memory
[INFO]: query_system_power_up_cause failed.
[INFO]: query_system_power_up_cause returns successfully.
[INFO]: requested_os_context: 0x%02x
[INFO]: current_os_context  : 0x%02x
[INFO]: requested_gr_context: 0x%02x
[INFO]: current_gr_context  : 0x%02x
[INFO]: last_shutdown_cause : 0x%02x
[INFO]: wake_source         : 0x%08x
[INFO]: (0x%08x) sc_config_info::xdr::query_config failed.
[INFO]: (0x%08x) is_waking_from_suspend_to_ram_mode() failed
[INFO]: b_str: bool(%d)
[INFO]: (0x%08x) identify_cbe_version_from_spu_vr() failed
[INFO]: CBE process technology id: 0x%08x
[INFO]: CBE design level: 0x%08x
[ERROR]: 0x%08x available spu not found
[ERROR]: 0x%08x invalid spu_memtest
areaAddress 0x%08llx, areaSize 0x%08x, dmaSize 0x%08x, isInfinite %d, loopTimes %d, runOnError %d, readRetry %d, spuID %d, flag 0x%08x
(%lld) %s
(%lld) stop. error=%d
0123456789ABCDEF
0123456789
IOW_DUMP
ITC_DUMP
%04x
PTC is not enabled.
PTC_DUMP
DUMP_PREFIX UNKNOWN
[INFO]: XIO CH0 Summary: 
[INFO]: Worst TX UI: 0.
 (DQ: 
 PIN: 
[INFO]: Worst RX UI: 0.
[ERROR]: => dynamically disabled due to poor UI value.
[INFO]: XIO CH1 Summary: 
[INFO]: m_mcp->basic_config.device_capacity: validated
[ERROR]: m_mcp->basic_config.device_capacity: illegal value
[INFO]: m_mcp->basic_config.min_window: validated
[ERROR]: m_mcp->basic_config.min_window: out of range
[INFO]: exercise wake-from-str appendant steps
[INFO]: SCK to 0.3V and CMD to 1.2V
[INFO]: ask syscon to disable SCK_FET
[INFO]: SCK to 1.2V
[INFO]: complete wake-from-str appendant steps
[INFO]: XIO Calibration start 
[INFO]: Rx Calibration being processed...
[INFO]: Tx Calibration being processed...
[INFO]: Do post process...
[INFO]: Enable PTCal...
[INFO]: Enable Scrubbing...
[INFO]: Wake from STR
[INFO]: >>> XDR Init: OK <<<
[ERROR]: >>> XDR Init: NG <<<
[ERROR]: Abort XDR Init due to incorrect YRAC PLL Config setting.
[INFO]: Store 128 Bytes to each channel
[INFO]: ECC OFF for XIO Ch0
[INFO]: ECC ON for XIO Ch0
[INFO]: ECC OFF for XIO Ch1
[INFO]: ECC ON for XIO Ch1
[INFO]: SRAM Parity ON for XIO Ch0
[INFO]: SRAM Parity ON for XIO Ch1
[INFO]: MIC Data Flow is now configured.
[INFO]: XIO Ch0 is available.
[INFO]: XIO Ch1 is available.
MIC_DUMP
%016llx
XIG314
XIO_DUMP
XDR_DUMP
%02x
invalidate4_iopt_cache fail %d
iost_addr is not aligned 4KB %08llx
iopt_addr is not aligned 4KB %08llx
%s: allocate_iost_entry fail %d
%s: invalid page_size
%s: ea_addr is not aligned by page_size in byte
%s: invalid ea_size < page size in byte
%s: iopt_entry_num > %d
%s: allocate_iopt_entry fail %d
allocate_io_address
[ERROR] 0x%08x %s(%d) intr %08x
idle
[ERROR] 0x%08x %s(%d) start_read_sector %d, stataus %08x
[ERROR] 0x%08x %s(%d) kick_dma %d
[ERROR] 0x%08x %s(%d) get_dma_status %08x
[ERROR] 0x%08x %s(%d) interrupt %08x
[ERROR] 0x%08x %s(%d) start_idle %d, stataus %08x
[ERROR] 0x%08x %s(%d) idle %d, stataus %08x
[ERROR] 0x%08x %s(%d) read_sector %d, stataus %08x
read_sectors_dma
[ERROR] %s(%d) pio is not contifured
is_ss2_interrupt_asserted
[ERROR]: 0x%08x %s fail %08x
get_dma_status
[ERROR]: 0x%08x %s not configured
[ERROR]: 0x%08x %s err status %08x
is_ebus_interrupt_asserted
get_dma_status
PX::EBCADMATCH%d %08x
PX::EBCACCTRL%d %08x
PX::EBCADBS%d %08x
%s: sc_tc(0x%04x) == sc_rc(0x%04x)
%s: too small payload_size %d, body_len %d
%s: too large payload_len %d
%s: body_len(%04x) != body_len2(%04x)
%s: header checksum %d != %d
%s: payload checksum %d != %d
%s: too large payload_size %d
%s: be_tc(0x%04x) != be_rc(0x%04x)
%s: write_init_msg fail %d
%s: wait_swbint(0) returns unknown value %d
%s: read_cmpl_msg fail %d
%s: read_cmpl_msg unknown id %d
%s: read_cmpl_msg unknown transaction_id %d
%s: read_cmpl_msg unknown communication_tag %d
%s: read_stat_msg fail %d
%s: write_stat_msg fail %d
%s: skip cmpl err %d, receive_id %d, transaction_id %d, communication_tag %d
read_cmpl_msg_ver1
write_init_msg_ver1
send_and_receive
[WARN]: sc_version nvs fail %d
[ERROR]: nv_storage::write block %d, offset %d, size %d fail %d
[ERROR]: nv_storage::read block %d, offset %d, size %d fail %d
sc_nv_storage error status %d
0123456789abcdef
TTTTTTTT

!miscompare:
    addr=%016lx
    data=%016lx %016lx
  expect=%016lx %016lx
     xor=%016lx %016lx
match
mismatch
retry #%d: %s
    addr=%016lx
    data=%016lx %016lx
  expect=%016lx %016lx
     xor=%016lx %016lx
no available LS memory
test area will be truncated: [%lp-%lp], required area [%lp-%lp]
%d Error(s)
0123456789abcdef
0123456789ABCDEF
SPUNAME
/home/tetsu/release/2009_03_24_2
.symtab
.strtab
.shstrtab
.text
.rodata
.ctors
.dtors
.data
.bss
.comment
.note.spu_name
p.1574
__DTOR_LIST__
_Z12verify_equal6v128_tS_
_Z11bufcheck128PvS_jy
_sys_vsnprintf
snprintf_char
sError
__divdi3
_Z10tbMemalignjjPv
sys_vsnprintf
_Z6tbExiti
_Z19test_buf_sequencialyyj9eDataTypej
__DTOR_END__
_ZN9TestBench3SPU3MFC10dmaCommandEPVKvyjjjjj
__umoddi3
_Exit
__udivdi3
_ZN9TestBench3SPU3MFC6dmaGetIP6v128_tEEvT_yjjjjj
_Z14do_memtest_spuP12MemtestParam
__CTOR_LIST__
_start
__TT800
sReadRetry
__bss_start
main
_Z10init_TT800j
__CTOR_END__
sRunOnError
__stack
_edata
_end
exit
_Z8tbPrintfPKcz
__moddi3
_exit
_Z16rand_int32_TT800v
Retrieved from "http://www.psdevwiki.com/ps3/index.php?title=Strings:bootldr_dump&oldid=24082"