Talk:PS3Cobra Payload Reverse Engineering
Jump to navigation
Jump to search
D/L's
COBRA v2.0 boot //mirror (TDC) dumpsource
PSGrooPIC Cobra v2.00 (not working)
cobra 2.0 exit from ps2 game+boot of ps2 game at 185632.rar (4.48 MB)
Updater v1.0
http://www.ps3hax.net/2011/10/cobra-v4-1-cobra-usb-ps3-updater-v1-0-released/
- http://www.cobra-usb.com/downloads/Cobra-USB_Firmware_v4.1.rar // Cobra-USB_Manager_v4.1.rar (3.92 MB)
- http://www.cobra-usb.com/downloads/Cobra-USB_Manager_v4.1.rar // Cobra-USB_Firmware_v4.1.rar (174.44 KB)
- http://www.cobra-usb.com/downloads/Cobra-USB_PSP-Launcher.rar // Cobra-USB_PSP-Launcher.rar (332.73 KB)
- http://www.cobra-usb.com/downloads/Cobra-USB_PS3_Updater_v1_0.rar // Cobra-USB_PS3_Updater_v1_0.rar (401.7 KB)
Hardware Dongle
Components
Actel ProASIC3 A3P060 - FPGA
U2
Pinout A3P060 VQ100
12.000 MHz Crystal
CLK for Actel
24.000 MHz Crystal
CLK for Atmel
AMS1117 3.3 1032 - Low Dropout Linear Regulator
U3
Datasheet: http://www.sltdigital.com/product/product_pdf/AMS1117.pdf / http://home1.cyber-labo.co.jp/board/goods/pdf/AMS1117.pdf
File:AMS1117 - SOT-223.png
(unreferenced 5pin IC : U4)
Atmel ATMEGA 16A
Winbond 25X16AVS1G (SPI Flash 16Mbit)
W - Winbond 25X - SPI Flash 16 - 16Mbit / 2M-byte (Uniform 4Kbyte sectors/64Kbyte blocks) AVS1G - 100MHz (200Mbits/sec)
datasheet: W25X16A.pdf (1.3 MB)
Note: can use Bus Ninja or Bus Pirate and FlashROM - ISP is possible, so long as no other devices on the SPI bus are trying to access the device (in that case, you might want to cut Vcc to the FPGA or the regulator for it).
Pin | Usage | Remarks |
---|---|---|
1 | /CS | Chip Select |
2 | DO | Data output |
3 | /WP | Write Protect |
4 | GND | Ground |
5 | DIO | Serial data input/output |
6 | CLK | Serial Clock |
7 | /HOLD | Hold |
8 | VCC | Vcc (min 2.7-max 3.6V) |