Talk:PS3Cobra Payload Reverse Engineering

D/L's

COBRA v2.0 boot //mirror (TDC) dumpsource

COBRA v2 objdump disassembly

COBRA v2 IDA disassembly

PSGrooPIC Cobra v2.00 (not working)

cobra 2.0 exit from ps2 game+boot of ps2 game at 185632.rar (4.48 MB)

---

Updater v1.0

http://www.ps3hax.net/2011/10/cobra-v4-1-cobra-usb-ps3-updater-v1-0-released/

• http://www.cobra-usb.com/downloads/Cobra-USB_Firmware_v4.1.rar // Cobra-USB_Manager_v4.1.rar (3.92 MB)

• http://www.cobra-usb.com/downloads/Cobra-USB_Manager_v4.1.rar // Cobra-USB_Firmware_v4.1.rar (174.44 KB)

• http://www.cobra-usb.com/downloads/Cobra-USB_PSP-Launcher.rar // Cobra-USB_PSP-Launcher.rar (332.73 KB)

• http://www.cobra-usb.com/downloads/Cobra-USB_PS3_Updater_v1_0.rar // Cobra-USB_PS3_Updater_v1_0.rar (401.7 KB)

• http://www.cobra-usb.com/downloads/Cobra-USB_PC_Updater_v2.0.rar

• Genps3iso v2.0 // genps3iso_v2.0.rar (51.26 KB)

• English User Guide v4.1 // UserManual-English_v4.1.pdf (698.72 KB)

• Cobra CFW v3.55

---

Hardware Dongle

Components

12.000 MHz Crystal

CLK for Actel

24.000 MHz Crystal

CLK for Atmel

AMS1117 2.851049 - Low Dropout Linear Regulator

Datasheet: http://www.sltdigital.com/product/product_pdf/AMS1117.pdf / http://home1.cyber-labo.co.jp/board/goods/pdf/AMS1117.pdf
File:AMS1117 - SOT-223.png

Winbond 25X16AVS1G (SPI Flash 16Mbit)

8-pin TSSOP
Winbond 25X16A
SOIC-8 pinout

W - Winbond
25X - SPI Flash
16 - 16Mbit / 2M-byte (Uniform 4Kbyte sectors/64Kbyte blocks)
AVS1G - 100MHz (200Mbits/sec)

datasheet: W25X16A.pdf (1.3 MB)
Note: can use Bus Ninja or Bus Pirate and FlashROM - ISP is possible, so long as no other devices on the SPI bus are trying to access the device (in that case, you might want to cut Vcc to the FPGA or the regulator for it).

Pin	Usage	Remarks
1	/CS	Chip Select
2	DO	Data output
3	/WP	Write Protect
4	GND	Ground
5	DIO	Serial data input/output
6	CLK	Serial Clock
7	/HOLD	Hold
8	VCC	Vcc (min 2.7-max 3.6V)