Strings
Jump to navigation
Jump to search
Description
Strings. Arrays of chars. In this case these arrays make sense and display information about what is happening inside the console. The goal of this page is to find as many strings as possible for documentative purposes.
Are these strings legal
They're words. I don't know any case of illegal words, but in case this is somewhat illegal, the moderator can delete the page and it'll be done.
Tools used
Only one tool was used. The strings linux command. The extraction of the pup was made with pupexplode. Cygwin x86 was used as a command line interface.
Strings
Binary | Notes |
---|---|
aim_spu_module | 4 Strings only! |
emer_init
First Chunk
factory/recover mode references
is factory mode ret[%x] get recover mode ret[%x] factory mode ON recover flag[%x] factory mode ON recover flag[%x] --> [%x] set recover mode ret[%x]
cellPad references
cellPadEnd() %x cellPadGetPadInfo2 [%08x] cellPadConfigSetLed [%08x]
file references
ss::g_emer_init::get_pup_filepath() error ss::g_emer_init::get_pup_filepath() error File open error [%s] file read error [%s] return value %d file read error segment_table [%s] return value [%d] file seek error [%s] seek value [%lld] return value %d file read error [%s] return value [%d] CELL_FS_IOS:PATA1_HDD_DRIVE CELL_FS_FAT
emer_init references
emer_init::search_update_package() ERROR %d emer_init::probe_hdd() ERROR %d emer_init::search_regions() ERROR %d emer_init::prepare_partitions() ERROR %d emer_init::setup_updating_environment() ERROR %d
others
PowerStateError!! [%d] RescueUtilityGetTvSetting %x argc [%d] argv[1] [%s] Gcm Init Memory Shortage. Gcm Init Memory Shortage. -mode=safe Resolution Error %d Format Error %d texture tex_ratio position color modelViewProj ramE /dev_hdd1/PS3UPDATE Unknown ERROR!!!! %d ErrorPage[%d] Code[%d] /dev_hdd1 The hard disk cannot be accessed. (01) %x The hard disk cannot be accessed. (03) %x cellSsAimIsCEX() %x g_vshTarget : [%d] Thread join failed. Thread join failed. Not Create Thread!! Not Create Thread!! ErrorCode [%d] countdown_thread update_manager_if::set_update_status() ERROR %d
lv2 dump (Rebug 4.46)
Game IDs
BLES00012 BLUS30013 BLAS50004 NPJA00007 NPUA80001 NPEA00021 BLUS30020 BLES00029 BLJM60016 NPHA70006 BCJS30066 BCAS25008 BCES01007 NPEA00321 NPEA90084 NPEA90085 NPEA90086 NPUA70118 NPUA70138 NPUA30067 NPUA70133 NPUA70134 NPUA70167 BCUS98234 BCJS37003 NPJA00071 NPJA90176 NPJA90177 NPJA90178 BLUS30940 BLES01707 BLJM60566 NPJB00218 NPEB00831 NPHB00504 NPUB30750
MFC
MFC_DAR 0x%lx, MFC_DSISR 0x%lx PFN MFC_CNTL %x PGR MFC_CNTL %x MFC FIR DSI segment, MFC_DAR 0x%llx %s #%x DSI storage, MFC_DSISR 0x%llx, MFC_DAR 0x%llx %s #%x mfceieio mfcsync MFC context: SPU %4sQ #%1x: EA %016llx LSA %05x Size %04x Op %02x Tag %02x R/T %01x%01x LtAddr %04x LtSize %03x Lt/No/Q/Ea/Ce/eV/lB/Sb/Ib %c%c%c%c%c%c%c%c%c SPU tag count Prxy tag count SPU Sb/Lb/Fb Prxy Sb/Fb #%02d %02d #%02d %02d #%02d %1d #%02d %1d #%1x %c%c%c %c%c
BT
BT: deprecate! @ bt_cancel_connect_accept_controller() BT: permission denied BT: Invalid message!! BT: copyin() failed! (%x) BT: copyout() failed! (%x) BT: Database::Lookup() failed! BT: Invalid command!! (%d) BT: mutex_create() failed! => (%x) BT: bt_set_device_info() failed! => 0x%x BT: bt_unregister_ops() failed! => 0x%x BT: bt_register_ops() failed! => 0x%x PlayStation(R) Controller BT: bt_get_device_info() failed! => 0x%x BT: bt_get_all_device_addr() failed! => 0x%x BT: Unknown service mask!! (0x%02x) BT: address duplicate!! BT: connection over!! BT: no memory! BT: no SDP Info!! (%x) BT: invalid blockLength! BT: invalid subband! BT: invalid allocation method! BT: bt_port_control(RX, SET_CONF) failed! => 0x%x BT: bt_port_control(TX, SET_CONF) failed! => 0x%x BT: too big!! (%d) BT: page_allocate() failed! (%x) BT: bt_port_control(RX, GET_LEN) failed! => 0x%x BT: bt_port_control(CRX, TRANSFER) failed! => 0x%x BT: bt_port_control(TX, SET_STATUS) failed! => 0x%x BT: bt_port_control(RX, SET_GAIN) failed! => 0x%x BT: bt_port_control(ITX, ALLOC) failed! => 0x%x BT: bt_port_control(IRX, ALLOC) failed! => 0x%x BT: bt_port_control(CTX, ALLOC) failed! => 0x%x BT: bt_port_control(CRX, ALLOC) failed! => 0x%x BT: config_service::get_instance() failed! BT: register_service() => (%x) BT: no BusDriver!! @ Available() BT: config_service::get_instance() => (ENOMEM) BT: unregister_service() failed! => (%x) BT: no BusDriver!! @ Unavailable() BT: no address!! BT: bt_port_control(TX, GET_LEN) failed! => 0x%x BT: get_id_table() failed! BT: reserve_id() failed! (%x) BT: event_port_create() failed! (%x) BT: event_port_connect() failed! (%x) BT: page_export_to_proc() failed! (%x) BT: event_port_send() failed! (%x) BT: callback inhibited. BT: bt_send_passkey(Reject) failed! => (%x) BT: bt_send_passkey() failed! => (%x) BT: bt_send_passkey() failed! => (%x) @ onPasskey() BT: Bluetooth is not active! BT: bt_inquiry_cancel() failed! => (%x) BT: bt_inquiry_start() failed! => (%x) BT: bt_send_passkey() failed! => (%x) @ SendPasskey() BT: bt_connect_start() failed! => (%x) BT: bt_connect_cancel() failed! => (%x) BT: encapsulation error! BT: No memory!! BT: no SDP Info!! (m_pSdp) BT: no SDP Info!! (isValid) BT: inhibit onUnavailable! BT: no DeviceInterface! BT: inhibit onAvailable! BT: no place!! BT: SetReport(InputReport) is not supported yet. BT: SetReport(OutputReport) is not supported yet. BT: GetReport(InputReport) is not supported yet. BT: GetReport(OutputReport) is not supported yet. BT: no device!! BT: GetProtocol() is not supported yet. BT: GetIdle() is not supported yet. BT: SDPDataElementParser error! USBBTAUDIO: deprecate! USBBTAUDIO: permission denied USBBTAUDIO: Invalid command!! (%d) USBBTAUDIO: mutex_create() failed! => (%x) USBBTAUDIO USBBTAUDIO: failed to send event. (Bluetooth device disabled) USBBTAUDIO: * message crossed! (same address) USBBTAUDIO: * connection is full!! USBBTAUDIO: failed to send event. (USB device disabled) USBBTAUDIO: failed to record! USBBTAUDIO: USBD is not active! USBBTAUDIO: unregister_service() => (%x) USBBTAUDIO: register_service() => (%x) USBBTAUDIO: no memory! USBBTAUDIO: no space! USBBTAUDIO: no ServiceInfo! USBBTAUDIO: failed to send event. USBBTAUDIO: Bt close error! => (%x) USBBTAUDIO: invalid frequency! USBBTAUDIO: invalid block length! USBBTAUDIO: invalid channel mode! USBBTAUDIO: invalid allocation method! USBBTAUDIO: invalid subband! USBBTAUDIO: Handle full!!
sys_net
sys_netdev_free_packet sys_net_bnet_kabort_socket sys_net_bnet_sysctl sys_net_bnet_select sys_net_bnet_poll sys_net_bnet_close sys_net_bnet_ioctl sys_net_bnet_getpeername sys_net_bnet_getsockname sys_net_bnet_getsockopt sys_net_bnet_setsockopt sys_net_bnet_shutdown sys_net_bnet_recvfrom sys_net_bnet_recvmsg sys_net_bnet_sendto sys_net_bnet_sendmsg sys_net_bnet_connect sys_net_bnet_accept sys_net_bnet_listen sys_net_bnet_bind sys_net_bnet_socket sys_net_bnet_abort_thread sys_net_bnet_abort_socket sys_net_bnet_control sys_net_bnet_get_sockinfo_sa
FS
CELL_FS_IOS: CELL_FS_UTILITY: ATA_HDD PATA1_HDD_DRIVE USB_MASS_STORAGE BUILTIN_FLASH BUILTIN_FLSH MEMORY_STICK SD_CARD COMPACT_FLASH CELL_FS_IOS:BUILTIN_FLASH CELL_FS_IOS:BUILTIN_FLSH1 CELL_FS_IOS:BUILTIN_FLSH2 CELL_FS_IOS:BUILTIN_FLSH3 CELL_FS_IOS:BUILTIN_FLSH4 CELL_FS_IOS:ATA_HDD CELL_FS_IOS:PATA1_HDD_DRIVE CELL_FS_UTILITY:HDD0 CELL_FS_UTILITY:HDD1 CELL_FS_UTILITY:HDD2 CELL_FS_DUMMY: CELL_FS_HOSTFS: CELL_FS_IOS:BDVD_DRIVE CELL_FS_IOS:PATA0_HDD_DRIVE CELL_FS_IOS:PATA0_BDVD_DRIVE CELL_FS_IOS:PATA1_HDD_DRIVE CELL_FS_IOS:PATA1_BDVD_DRIVE CELL_FS_IOS:BUILTIN_FLASH CELL_FS_IOS:COMPACT_FLASH CELL_FS_IOS:MEMORY_STICK CELL_FS_IOS:SD_CARD CELL_FS_IOS:USB_MASS_STORAGE000 CELL_FS_IOS:USB_MASS_STORAGE001 CELL_FS_IOS:USB_MASS_STORAGE002 CELL_FS_IOS:USB_MASS_STORAGE003 CELL_FS_IOS:USB_MASS_STORAGE004 CELL_FS_IOS:USB_MASS_STORAGE005 CELL_FS_IOS:USB_MASS_STORAGE CELL_FS_IOS:BUILTIN_FLSH1 CELL_FS_IOS:BUILTIN_FLSH2 CELL_FS_IOS:BUILTIN_FLSH3 CELL_FS_IOS:BUILTIN_FLSH4 CELL_FS_UTILITY:HDD0 CELL_FS_UTILITY:HDD1 CELL_FS_UTILITY:HDD2 CELL_FS_UTILITY:HDD CELL_FS_PSEUDO: CELL_FS_ADMINFS: /dev_hdd0/tmp /dev_hdd0/tmp/fs /dev_hdd0/tmp/fs/iso9660.dat
FileSystemEntry
FileSystemEntry080::WriteAcl: null path FileSystemEntry080::ReadAcl: null data buffer FileSystemEntry080::ReadAcl: null path FileSystemEntry080::CloseDir: invalid fd FileSystemEntry080::OpenDir: null fd buffer FileSystemEntry080::OpenDir: null path FileSystemEntry080::Unlink: null path FileSystemEntry080::Truncate: null path FileSystemEntry080::ChangeFileSize: null path FileSystemEntry080::Rename: null old_path FileSystemEntry080::Rename: null new_path FileSystemEntry080::Df: null total_size buffer FileSystemEntry080::Df: null free_size buffer FileSystemEntry080::Ftruncate: invalid fd FileSystemEntry080::ChangeFileSize: invalid fd FileSystemEntry080::Unlock: invalid fd FileSystemEntry080::Lock: invalid fd FileSystemEntry080::Fsync: invalid fd FileSystemEntry080::Fdatasync: invalid fd FileSystemEntry080::Fstat: invalid fd FileSystemEntry080::Fstat: null buffer FileSystemEntry080::Close: invalid fd FileSystemEntry080::GetBlockSize(fd): null sector_size buffer FileSystemEntry080::GetBlockSize(fd): null block_size buffer FileSystemEntry080::GetBlockSize(fd): invalid fd FileSystemEntry080::GetBlockSize(path): null sector_size buffer FileSystemEntry080::GetBlockSize(path): null block_size buffer FileSystemEntry080::GetBlockSize(path): null path FileSystemEntry080::Open: null fd buffer FileSystemEntry080::Open: null path FileSystemEntry080::Open: not has connection FileSystemEntry080::Chstat: null data FileSystemEntry080::Chstat: null path
FAT
FAT12 FAT12 FAT12 FAT12 FAT12 FAT16 NO NAME FAT12 NO NAME FAT16 NO NAME FAT32