Talk:Move Motion Controller

http://www.acidmods.com/forum/index.php?topic=39107.0

Device Descriptor

http://www.motioninjoy.com/wiki/en/hardware/psmove

Device Descriptor
Offset	Field	Size	Value	Description
0	bLength	1	0x12	Size of this descriptor in bytes (18)
1	bDescriptorType	1	0x01	DEVICE descriptor type (Constant = 1)
2	bcdUSB	2	0x0200	USB Spec release number (2.00): with which the device and is descriptors are compliant (e.g.: 0x0200 (USB2.0), 0x0300, (USB3.0))
4	bDeviceClass	1	0x00	Class code assigned by USB-IF: (used by the operating system to find a class driver for your device) 00h means each interface defines its own class (identify itself at the interface level: bInterfaceClass) FFh means vendor-defined class Any other value must be a class code
5	bDeviceSubClass	1	0x00	SubClass Code assigned by USB-IF (used by the operating system to find a class driver for your device)
6	bDeviceProtocol	1	0x00	Protocol Code assigned by USB-IF (used by the operating system to find a class driver for your device)
7	bMaxPacketSize0	1	0x40	Max packet size for endpoint 0. (64) Must be 8, 16, 32 or 64 Must be 9 according to Compliance Test Specification for the USB 3.0 Architecture p29 9.1
8	idVendor	2	0x054C	Vendor ID (VID) (Sony Corp.) must be obtained from USB-IF (used by the operating system to find a driver for your device)
10	idProduct	2	0x03D5	Product ID (PID) - assigned by the manufacturer (used by the operating system to find a driver for your device)
12	bcdDevice	2	0x0220	Device release number (Version: 2.20) in binary coded decimal
14	iManufacturer	1	0x01	Index of string descriptor describing manufacturer set to 0 if no string
15	iProduct	1	0x02	Index of string descriptor describing product set to 0 if no string
16	iSerialNumber	1	0x00	Index of string descriptor describing device serial number set to 0 if no string
17	bNumConfigurations	1	0x01	Number of possible configurations