Revision as of 04:16, 28 April 2014

BD Drive

Interface speed is max. 11MB/s based on the supported read speeds

Supported Disc Formats

BD

Blu-ray disc read maximum is at 2× speed (72 Mbit/s), region coded type allowing the use of:

PlayStation 3 BD-ROM (DVD region matched; i.e., Zone 1, Zone 2, etc., and All)
BD-ROM (BD region matched; i.e., Area A, Area B, etc., and All)
BD-R
BD-RE (not compatible with BD-RE version 1.0)

DVD

DVD disc read maximum is at 8× speed (86.40 Mbit/s), region region coded type allowing the use of:

PlayStation 2 DVD-ROM[33] (PlayStation region matched; i.e., NTSC-J, NTSC-U/C, PAL or NTSC-C)
DVD-ROM
DVD-Video (DVD region matched; i.e., Zone 1, Zone 2, etc., and All)
DVD-Audio (DVD-Video content only)
DVD+R
DVD+RW
DVD-R
DVD-RW
AVCHD
DSD Disc
DualDisc

CD

Compact Disc disc read maximum is at 24× speed (29.49 Mbit/s), region coded type allowing the use of:

PlayStation 2 CD-ROM (PlayStation region matched; i.e., NTSC-J, NTSC-U/C, PAL or NTSC-C, compatibility removed in 40 GB model, the second 80 GB model (CECHF), and the 160 GB model)
PlayStation CD-ROM (PlayStation region matched; i.e., NTSC-J, NTSC-U or PAL)
CD-ROM
CD-R
CD-RW
CD-DA
Photo CD?
Picture CD?
MP3 CD (MP3, WMA, ATRAC)
Super Audio CD (compatibility removed in 40 GB, the second 80 GB model (CECHF), and the 160 GB model)

Bluray Drive Revisions

Drive	Partno.	Laser	Lenses	Slide	Daughterboards	Part no.	Controller	Motherboard	@SKU	Notes
BD-400	2-888-817-01	KES-400A	1	KEM-400AAA	BMD-001	1-871-575-14 1-871-575-24 1-871-575-34	CXD5063AGG-1	COK-001	CECHAxx
BD-400	2-888-817-01	KES-400A	1	KEM-400AAA	BMD-001	1-871-575-14 1-871-575-24 1-871-575-34	CXD5063AGG-1	COK-001	CECHBxx
BD-400	2-888-817-01	KES-400A	1	KEM-400AAA	BMD-001	1-871-575-14 1-871-575-24 1-871-575-34	CXD5063AGG-1	COK-002	CECHCxx
BD-400	2-888-817-01	KES-400A	1	KEM-400AAA	BMD-001	1-871-575-14 1-871-575-24 1-871-575-34	CXD5063AGG-1	COK-002 or COK-002W	CECHExx
BD-400	2-888-817-01	KES-400A	1	KEM-400AAA	BMD-002	1-874-277-13 1-874-277-23 1-874-277-33	CXD5065GB-1	SEM-001	CECHGxx
BD-400	2-888-817-01	KES-400A	1	KEM-400AAA	BMD-003	1-875-350-21 1-875-350-31	CXD5065GB-1	SEM-001	CECHGxx
BD-410	3-278-607-01	KES-410A	2	KEM-410ACA	BMD-003	1-875-350-21 1-875-350-31	CXD5065GB-1	DIA-001	CECHHxx
BD-410	-	KES-410A	2	KEM-410ACA	?BMD-004?	?		DIA-001	CECHHxx
BD-410	-	KES-410A	2	KEM-410ACA	?BMD-004?	?		DIA-002	CECHJxx
BD-410	-	KES-410A	2	KEM-410ACA	BMD-006	1-876-815-11	CXD5065GB-1	DIA-002	CECHKxx
BD-410	3-874-913-11	KES-410A	2	KEM-410ACA	BMD-011	1-877-014-11	Renesas R8J32800FPV	DIA-002	CECHKxx
BD-410	3-874-913-11	KES-410A	2	KEM-410ACA	BMD-021	1-878-065-31	CXD5065GB-1	VER-001	CECHLxx
BD-410	3-874-913-11	KES-410A	2	KEM-410ACA	BMD-031	1-878-515-31 1-878-515-41	Renesas R8J32810FPV1	VER-001	CECHLxx
BD-410	3-874-913-11	KES-410A	2	KEM-410ACA	BMD-021	1-878-065-31	CXD5065GB-1	VER-001	CECHMxx
BD-410	3-874-913-11	KES-410A	2	KEM-410ACA	BMD-021	1-878-065-31	CXD5065GB-1	VER-001	CECHPxx
BD-410	-	KES-410A	2	KEM-410ACA	BMD-031	1-878-515-31 1-878-515-41	Renesas R8J32810FPV1	VER-001	CECHPxx
BD-410	3-874-913-11	KES-410A	2	KEM-410ACA	BMD-021	1-878-065-31	CXD5065GB-1	VER-001	CECHQxx
BD-410	3-874-913-11	KES-410A	2	KEM-410CCA	?BMD-031?				?
BD-450	3-874-913-01	KES-450A	2	KEM-450AAA	BMD-051	1-879-786-11 1-879-786-21	Renesas R8J32820FPV1	DYN-001	CECH-20xx	KES-450A Laser will work with all slims before the CECH-30xx series.
BD-450	3-874-913-01	KES-450ACA	2	KEM-450AAA	BMD-061	1-880-551-21	CXD5130R-1	DYN-001	CECH-20xx	Known to have KES-450A Laser.
BD-450	3-874-913-01	-	2	-	BMD-065	1-880-551-41	CXD5131R-1	SUR-001	CECH-21xx	Known to have KES-450A or KES-460A Laser.
BD-460	4-192-406-01	KES-450D or KES-460A ?	2	KEM-450DAA	No (integrated on Motherboard)		Renesas R8J32830FPV1 or CXD?????	JTP-001 or JSD-001	CECH-25xx	KES-460A Laser will work with all slims before the CECH-30xx series.
BD-470		KES-470A	2	KEM-450EAA	No (integrated on Motherboard)		CXD5132R-1	KTE-001	CECH-30xx	KES-470A Laser is not backwards compatible.
BD-850		KES-850A	2	KEM-850	No (integrated on Motherboard)		CXD5132R-1	MPX-001 or MSX-001 or NPX-001	CECH-40xx	KES-470A Laser MIGHT work.

Notes
- In lasers models with 2 lenses, one is for CD/DVD, another for Blu-ray
- Need proper sources, drive info and which PS3 SKU's are having X drive. Please fill in the needed info if possible.

CECHA, CECHB, CECHC, (some CECHE, CECHG)

Initial FAT models: With BD-400 drive, BMD-001 daughterboard capable for driving KEM-400AAA slide and KES-400A laser.

CECHE

Some have a KES-410ACA dual lens laser.

CECHG

First seen on CECHGxx: Still BD-400 drive, but now with BMD-002 or BMD-003 daughterboard

CECHH, CECHI, CECHJ, CECHK, CECHL, CECHM, CECHN, CECHO, CECHP, CECHQ

Since CECHHxx and later: Changed to BD-410 drive, with BMD-003/BMD-004/BMD-006/BMD-011/BMD-021/BMD-031 daughterboard and KES-410A dual lens laser

CECH2000

CECH-20xx slims introduced BD-450 with BMD-051 daughterboard, capable of driving KES-450A laser and KEM-450AAA slide

CECH2500, CECH3000 without daughterboard

CECH-25xx (and later CECH-30xx) series moved the components from the daughterboard to the main PS3 motherboard. Thus there are more/different flatcables used to connect the drive. They are electrical inter-changable (2500<>3000), but mounting differs slightly. It can be modified to fit by cutting some plastic pins on the bottom front of the drive (to make it fit properly with the start/eject board).
Note: there is conflicting mention of KES-450A, KES-460A, KES-470A in these models (which physically are interchangeable, but some sources mention higher numbers not working on consoles with originally KES-450A)

CECH4000 toploader

CECH-40xx introduced the toploader (like ps2 slim and old ps1 had) with KEM-850 PHA 0672 assembly.

unreferenced

KES-450E
KEM-480AAA unknown PS3 model

Remarry BluRay drive

BluRay drive daughterboard is paired with PS3 motherboard, so exchanging a BluRay drive requires remarriage of the BluRay daughterboard. See: Remarry Bluray Drive

BluRay region switcher

This makes changing the BluRay region switching possible. The method described below is using 3 region specific bytes (0x84, 0x85, 0x8C) to change the modelinfo.

Other modelinfo byte values: 0x81 Reference Tool, 0x82 Debug, 0x83 Japan (00), 0x84 North America (01), 0x85 Europe, Middle East, Africa (04), 0x86 South Korea (05), 0x87 United Kingom, Ireland (03), 0x88 Mexico (11), 0x89 Australia, New Zealand (02), 0x8A Singapore, Malaysia (06), 0x8B Taiwan (07), 0x8C Russia, India (08), 0x8D China (09), 0x8E Hong Kong (12)

Payloader method prerequisites:

LV2 Patcher v9
patchfiles (see below)

patch4.txt content (3.55 offsets):

# BD Region A (NTSC) [North America]
# Patches marked with (*1) seem to be unstable. Thanks to drizztbsd and
# RandomUse.
# PL3:
ef48: payload.bin # this is not neccesary, 
# just the first QWORD of the payload
# Change region to US... Thanks ps3mrenigma
# Syscall preamble
F380: F821FF51 # stdu    %sp, -0xB0(%sp)
F384: 7C0802A6 # mflr    %r0
F388: FBC100A0 # std     %r30, 0xA0(%sp)
F38C: FBE100A8 # std     %r31, 0xA8(%sp)
F390: FBA10098 # std     %r29, 0×98(%sp)
F394: F80100C0 # std     %r0,  0xC0(%sp)
# capture 0x19004 if not jump to original syscall 
F398: 3FE00001 # lis        %r31, 1
F39C: 63FF9004 # ori        %r31, %r31, 0×9004
F3A0: 7C1F1800 # cmpw    %r31, %r3
F3A4: 4082003C # bne _orig_syscall
# Force US - Retail
F3A8: 3BC00084 # li        %r30, 0×84 
F3AC: 3BA00001 # li        %r29, 1
F3B0: 9BA40001 # stb        %r29, 1(%r4)
F3B4: 9BC40003 # stb        %r30, 3(%r4)
F3B8: 9BA40005 # stb        %r29, 5(%r4)
F3BC: 9BA40007 # stb        %r29, 7(%r4)
F3C0: 38600000 # li        %r3, 0
# Restore STACK
F3C4: E80100C0 # ld        %r0, 0xC0(%sp)
F3C8: EBA10098 # ld        %r29, 0×98(%sp) 
F3CC: EBE100A8 # ld        %r31, 0xA8(%sp)
F3D0: EBC100A0 # ld        %r30, 0xA0(%sp)
F3D4: 7C0803A6 # mtlr    %r0
F3D8: 382100B0 # addi    %sp, %sp, 0xB0
F3DC: 4E800020 # blr
F3E0: 4823ED28 # b syscall0x363
31EB1C: 0000F380 #syscall 0x363 descriptor

patch5.txt content(3.55 offsets):

# BD Region B (PAL) [Europe, Middle East, Africa]
# Patches marked with (*1) seem to be unstable. Thanks to drizztbsd and
# RandomUse.
# PL3:
ef48: payload.bin # this is not neccesary, 
# just the first QWORD of the payload
# Change region to Europe... Thanks ps3mrenigma
# Syscall preamble
F380: F821FF51 # stdu    %sp, -0xB0(%sp)
F384: 7C0802A6 # mflr    %r0
F388: FBC100A0 # std     %r30, 0xA0(%sp)
F38C: FBE100A8 # std     %r31, 0xA8(%sp)
F390: FBA10098 # std     %r29, 0×98(%sp)
F394: F80100C0 # std     %r0,  0xC0(%sp)
# capture 0x19004 if not jump to original syscall 
F398: 3FE00001 # lis        %r31, 1
F39C: 63FF9004 # ori        %r31, %r31, 0×9004
F3A0: 7C1F1800 # cmpw    %r31, %r3
F3A4: 4082003C # bne _orig_syscall
# Force Europe - Retail
F3A8: 3BC00085 # li        %r30, 0×85 
F3AC: 3BA00001 # li        %r29, 1
F3B0: 9BA40001 # stb        %r29, 1(%r4)
F3B4: 9BC40003 # stb        %r30, 3(%r4)
F3B8: 9BA40005 # stb        %r29, 5(%r4)
F3BC: 9BA40007 # stb        %r29, 7(%r4)
F3C0: 38600000 # li        %r3, 0
# Restore STACK
F3C4: E80100C0 # ld        %r0, 0xC0(%sp)
F3C8: EBA10098 # ld        %r29, 0×98(%sp) 
F3CC: EBE100A8 # ld        %r31, 0xA8(%sp)
F3D0: EBC100A0 # ld        %r30, 0xA0(%sp)
F3D4: 7C0803A6 # mtlr    %r0
F3D8: 382100B0 # addi    %sp, %sp, 0xB0
F3DC: 4E800020 # blr
F3E0: 4823ED28 # b syscall0x363
31EB1C: 0000F380 #syscall 0x363 descriptor

patch6.txt content(3.55 offsets):

# BD Region C (RUSSIA/INDIA)
# Patches marked with (*1) seem to be unstable. Thanks to drizztbsd and
# RandomUse.
# PL3:
ef48: payload.bin # this is not neccesary, 
# just the first QWORD of the payload
# Change region to US... Thanks ps3mrenigma
# Syscall preamble
F380: F821FF51 # stdu    %sp, -0xB0(%sp)
F384: 7C0802A6 # mflr    %r0
F388: FBC100A0 # std     %r30, 0xA0(%sp)
F38C: FBE100A8 # std     %r31, 0xA8(%sp)
F390: FBA10098 # std     %r29, 0×98(%sp)
F394: F80100C0 # std     %r0,  0xC0(%sp)
# capture 0x19004 if not jump to original syscall 
F398: 3FE00001 # lis        %r31, 1
F39C: 63FF9004 # ori        %r31, %r31, 0×9004
F3A0: 7C1F1800 # cmpw    %r31, %r3
F3A4: 4082003C # bne _orig_syscall
# Force Russia - Retail
F3A8: 3BC0008C # li        %r30, 0×8C 
F3AC: 3BA00001 # li        %r29, 1
F3B0: 9BA40001 # stb        %r29, 1(%r4)
F3B4: 9BC40003 # stb        %r30, 3(%r4)
F3B8: 9BA40005 # stb        %r29, 5(%r4)
F3BC: 9BA40007 # stb        %r29, 7(%r4)
F3C0: 38600000 # li        %r3, 0
# Restore STACK
F3C4: E80100C0 # ld        %r0, 0xC0(%sp)
F3C8: EBA10098 # ld        %r29, 0×98(%sp) 
F3CC: EBE100A8 # ld        %r31, 0xA8(%sp)
F3D0: EBC100A0 # ld        %r30, 0xA0(%sp)
F3D4: 7C0803A6 # mtlr    %r0
F3D8: 382100B0 # addi    %sp, %sp, 0xB0
F3DC: 4E800020 # blr
F3E0: 4823ED28 # b syscall0x363
31EB1C: 0000F380 #syscall 0x363 descriptor

Copy the patch files to /dev_hdd0/game/LV2000000/USRDIR and use LV2 Patcher to select the patch to use. Reboot to return to original state.

Reference: ps3mrenigma blog export

Hardware Components

The drive controller contains a BGA-sized 2MB NOR flash memory chip for Blu-ray drive firmware code, with the contents encrypted. In addition to this, there is a 8MB SDRAM working memory chip. Each drive contains a unique identification number, possibly stored in the SPI Serial Interface Macronix EEPROM. This chip or the NOR flash chip probably stores the device key (and associated sequence keys), and the host private key. The Blu-ray drive is controlled by a Sony Digital Signal Processor chip (CXD6350GG-1, CXD5063AGG-1, CXD5065GB-1, CXD5065-1 depending the SKU) and a Sony CXA2720R Front End Processor chip. Motors/coils are driven by Rohm BA5888FP (Laser Driver - Tracking/Focus Coils driver) and Rohm BD7956FS (Motor Driver - EXP-Motor coils/sled/slot motor driver), of which the Laser Driver uses an OPAMP NJM13403V for Tracking/Focus CTRL.

Type	Size	Speed	Voltage	Packaging	Manufacturer	Serial Number	Description
NOR Flash	2MB		3V		Spansion	S99-50111-001	PS3 Blu-ray firmware chip
NOR Flash	1MB		3V	BGA-48/BGA-64	Spansion	S29AL008D / AL008D0043-01	PS3 Blu-ray firmware chip (CECHJ and later models)
SDRAM	8MB	133MHz	3.3V	TSOPII-54	Samsung	K4S641632K-UC75	PS3 Blu-ray working memory chip
SDRAM	8MB	143MHz	3.3V	TSOPII-54	ESMT	M12L64164A-7TG	PS3 Blu-ray working memory chip (CECHJ and later models)
EEPROM	128KB	85MHz			Macronix	MX25L1005MC-12G	PS3 Blu-ray flash chip

BD Drive IC Components

CXD6350GG-1 (Digital Signal Processor)

IC300
Used in BMD-001, BMD-002

CXD5063AGG-1 (Digital Signal Processor)

IC300
Used in BMD-001, BMD-002

CXD5065GB-1 (Digital Signal Processor)

IC300
Used in BMD-001, BMD-002, BMD-003
http://www.ps3devwiki.com/index.php?title=File:CXD5065GB-1-GRID-bw-pcbview.png
Other Reference: http://stefde69.blogspot.com/2010/04/blue-ray-board-made-accessible.html

Renesas R8J32800FPV (Digital Signal Processor)

Used in BMD-011

Renesas R8J32810FPV1 (Digital Signal Processor)

Used in BMD-031

Renesas R8J32820FPV1 (Digital Signal Processor)

Used in BMD-051
running @ 33.969MHz

Renesas R8J32820FPV1

Renesas R8J32830FPV1 (Digital Signal Processor)

Integrated on motherboard in CECH-25xx models with JTP-001 motherboard

Renesas R8J32830FPV1 (integrated on JTP-001 motherboard)

CXD5130R-1 (Digital Signal Processor)

Used in BMD-061

CXD5131R-1 (Digital Signal Processor)

Used in BMD-065

CXD5065-1 (Digital Signal Processor)

IC300
Used in BMD-006

CXA2720R (Front-End-Processor)

IC110
Used in BMD-001, BMD-002, BMD-003, BMD-006

Rohm BA5888FP (Laser Driver - Tracking/Focus Coils driver)

Simular Datasheet: BA5954FP.pdf
IC108
Used in BMD-001, BMD-002, BMD-003, BMD-006

Rohm BD7956FS (7 channel Motor Driver - EXP-Motor coils/sled/slot motor driver)

Datasheet: bd7956fs.pdf
IC103
Used in BMD-001, BMD-002, BMD-003, BMD-006

Rohm BD7969EFV (9 channel Motor/Coil Driver - EXP-Motor coils/sled/slot/focus motor driver)

Datasheet: bd7959efv-e.pdf
bd7959efv
Used in BMD-061

Integrated on motherboard in CECH-25xx (at bottom side)

NJM13403V (OPAMP - Tracking/Focus CTRL)

Datasheet: NJM13403V.pdf (153.98 KB)
IC303
Used in BMD-001, BMD-002, BMD-003
http://www.ps3devwiki.com/index.php?title=File:NJM13403V-SSOP14.png

Spansion S99-50111-001 (NOR)

IC304
Contains encrypted firmware
Used in BMD-001

Macronix MX25L1635DM2I-12G (16M-BIT x1/x2/x4 CMOS Serial Flash)

Datasheet: [1]
Used in BMD-061

CXD5064R

IC504
Used in BMD-001, BMD-002

BD Drive Connectors

CN301 - Bluraydrive Main I/O Connector

60-pin DB Connector
bluray drive

60 pins
To mainboard, Data
Used in BMD-001, BMD-002, BMD-003

Pin	Usage	Remarks
1	EVER3.3V
2	GND	Ground
3	12_SW	12CM Disk Switch
4	8_SW	8CM Disk Switch
5	HOST_EJECT
6	HOST_DISCIN
7	DISC_CHUCK
8	PHOTO_LED
9	DISCIN_SW
10	GND	Ground
11	SCK
12	SCS
13	SIN
14	SOUT
15	XSIOINT
16	RESERVED	TXD
17	RESERVED	RD
18	XSB_CBLID
19	GND	Ground
20	DAT
21	LRCK
22	BCK
23	GND	Ground
24	HINT
25	HA1
26	XPDIAG
27	HA0
28	HA2
29	XHCS0
30	XHCS1
31	XDASP
32	GND	Ground
33	DREQ
34	GND	Ground
35	XIOW
36	GND	Ground
37	XIOR
38	GND	Ground
39	XIOCHRDY
40	CSEL
41	XDACK
42	GND	Ground
43	HDB7
44	HDB8
45	HDB6
46	HDB9
47	HDB5
48	HDB10
49	HDB4
50	HDB11
51	HDB3
52	HDB12
53	HDB2
54	HDB13
55	HDB1
56	HDB14
57	HDB0
58	HDB15
59	GND	Ground
60	XRESET

CN100 14pin

Pin	Usage	Remarks
1	5V	+5V DC
2	SCKSNS3	S clock Sense
3	Slide Cam SW
4	12cm SW	to S100: 12cm Detection Switch
5	8cm SW	to S101: 8cm Detection Switch
6	DISC CHUCK	to S102: Chucking Switch
7	DISC IN SW
8	EVER 3.3V	+3.3V DC
9	GND	Ground
10	NC	No connection
11	LOAD+	to 12
12	LOAD+	to CN101-2pin:2
13	LOAD-	to 14
14	LOAD-	to CN101-2pin:1

CN101 2pin

Pin	Usage	Remarks
1	LOAD-	to CN100-14pin:13+14
2	LOAD+	to CN100-14pin:11+12

CN104 2pin

To IR-LED for detect disc insertion
Used in BMD-001, BMD-002

Pin	Usage	Remarks
1
2

CN200 2pin

Pin	Usage	Remarks
1	PHOTO LED	to JL200
2	GND	Ground ; to JL201

CN103 45pin

To laser, Data and Focus/Tracking
Used in BMD-001, BMD-002, BMD-003

Pin	Usage	Remarks
1	IOP_MON
2	TEST_V
3	EMST
4	LDEN
5	XRST
6	SDIO
7	SEN_LDD
8	SCLK
9	THERMO
10	8.0V	8.0V DC
11	5.0V	5V DC
12	GND_LD	Ground
13	GND_LD	Ground
14	3.3V	3.3V DC
15	GND	Ground
16	GND	Ground
17	XOUT
18	H
19	G
20	F
21	E
22	VC_PD
23	D
24	C
25	B
26	A
27	5V_PD	VCC 5V DC
28	GND_PD	Ground
29	DVD_AF-
30	DVD_AF+
31	GND_PD	Ground
32	BD_AF-
33	BD_AF+
34	GND_PD	Ground
35	VPP_LCD
36	SEN_LCD
37	EXP_B-
38	EXP_B+
39	EXP_A-
40	EXP_A+
41	EXP_INIT
42	TRK_in
43	FCS_far
44	FCS_near
45	TRK_out

CN102 8pin

To spindle motor
Used in BMD-001, BMD-002

Pin	Usage	Remarks
1	SLDA3
2	SLDA3
3	SLDA1
4	SLDA1
5	SLDB1
6	SLDB1
7	SLDB3
8	SLDB3

CN101 14pin

To position tracking mechanics
Used in BMD-001, BMD-002

Pin	Usage	Remarks
1	5V	+5V DC
2	SCKSNS3	S clock Sense
3	SW4	Slide Cam SW
4	SW3	12cm SW
5	SW2	8cm SW
6	DISC CHUCK
7	DISC IN SW
8	EVER 3.3V	+3.3V DC
9	GND	Ground
10	NC	No connection
11	LOAD+	to 12
12	LOAD+
13	LOAD-	to 14
14	LOAD-

CN101 8pin

To position tracking mechanics
Used in BMD-003

Pin	Usage	Remarks
1
2
3
4
5
6
7
8

CN100 19pin

To disc motor
Used in BMD-001, BMD-002

Pin	Usage	Remarks
1	HB+
2	HB-
3	HW-
4	HW+
5	HV-
6	HV+
7	HU-
8	HU+
9	U
10	U
11	V
12	V
13	W
14	W
15	FGND	Ground
16	SIGGND	Ground
17	INSW
18	SCK5V
19	SCKSNS

CN100 18pin

To disc motor
Used in BMD-003

Pin	Usage	Remarks
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18

CN300 45pin

?
Used in BMD-001, BMD-002, BMD-003

Pin	Usage	Remarks
1	3.3V
2	3.3V
3	5V
4	5V
5	RESERVED
6	RESERVED
7	RESERVED
8	TRACESYNC
9	PIPESTAT0
10	PIPESTAT1
11	PIPESTAT2
12	TRACECLK
13	TRACEPKT15
14	TRACEPKT14
15	TRACEPKT11
16	TRACEPKT13
17	TRACEPKT10
18	TRACEPKT6
19	TRACEPKT9
20	TRACEPKT3
21	TRACEPKT8
22	TRACEPKT1
23	TRACEPKT5
24	TRACEPKT12
25	TRACEPKT2
26	TRACEPKT7
27	TRACEPKT0
28	TRACEPKT4
29	TINT
30	TMS
31	TDO
32	JTSEL
33	TCK
34	NTRST
35	RTCK
36	TDI
37	NSRST
38	RXD
39	TXD
40	DBDRQ
41	DBGACK
42	GND	Ground
43	GND	Ground
44	GND	Ground
45	GND	Ground

CN502 4pin

To mainboard, Power
Used in BMD-001, BMD-002, BMD-003

Pin	Usage	Remarks
1	12V
2	GND	Ground
3	GND	Ground
4	5V

@@ Line 1: / Line 1: @@
 = BD Drive =
 Interface speed is max. 11MB/s based on the supported read speeds
+== Supported Disc Formats ==
-== Disc Formats supported ==
 ===BD===
 {{media ps3 bd}} {{media ps3 bd install}} {{media ps3 bd video}}
@@ Line 15: / Line 13: @@
 ===DVD===
-{{media ps2 dvd}} {{media data dvd}} {{media data sacd}}
+{{media ps2 dvd}} {{media data dvd}}
 DVD disc read maximum is at 8× speed (86.40 Mbit/s), [[Regions|region]] region coded type allowing the use of:
@@ Line 29: / Line 27: @@
 * DSD Disc
 * DualDisc
-* Super Audio CD (compatibility removed in 40 GB, the second 80 GB model (CECHF), and the 160 GB model)
 ===CD===
-{{media ps1 cd}} {{media data cd}}
+{{media ps1 cd}} {{media data cd}} {{media data sacd}}
 Compact Disc disc read maximum is at 24× speed (29.49 Mbit/s), [[Regions|region]] coded type allowing the use of:
@@ Line 44: / Line 41: @@
 * Picture CD?
 * MP3 CD (MP3, WMA, ATRAC)
+* Super Audio CD (compatibility removed in 40 GB, the second 80 GB model (CECHF), and the 160 GB model)
 == Bluray Drive Revisions ==
-When comparing with fielddata from spare parts sellers:
-{| border="1" cellspacing="0" cellpadding="5" border="#999" class="wikitable" style="border:1px solid #999; border-collapse: collapse;"
+{| class="wikitable"
-|- bgcolor="#cccccc"
+|-
 ! Drive !! Partno. !! <abbr title="Laser Assembly">Laser</abbr> !! Lenses !! <abbr title="Mounting Drivesled">Slide</abbr> !! Daughterboards !! Part no. !! Controller !! Motherboard !! @SKU !! Notes
 |-
@@ Line 104: / Line 101: @@
 *Notes
 **In lasers models with 2 lenses, one is for CD/DVD, another for Blu-ray
-**Need proper sources, drive info and which PS3 SKU's are having X drive
+**Need proper sources, drive info and which PS3 SKU's are having X drive. Please fill in the needed info if possible.
-**[[KEM-480AAA]] unknown PS3 model
-**Please fill in the needed info if possible.
 === CECHA, CECHB, CECHC, (some CECHE, CECHG) ===
@@ Line 129: / Line 124: @@
 === CECH4000 toploader ===
 [[CECH-40xx]] introduced the toploader (like ps2 slim and old ps1 had) with [[KEM-850]] PHA 0672 assembly.
 === unreferenced ===
-[[KES-450E]]
+*[[KES-450E]]
+*[[KEM-480AAA]] unknown PS3 model
 == Remarry BluRay drive ==
-Hardware is interlocked on the PS3, so exchanging a bluray drive from one unit to another requires remarriage of the components.
+BluRay drive daughterboard is paired with PS3 motherboard, so exchanging a BluRay drive requires remarriage of the BluRay daughterboard. See: [[Remarry Bluray Drive]]
-alinea moved to seperate page : [[Remarry Bluray Drive]]
 == BluRay region switcher ==
 This makes changing the [http://en.wikipedia.org/wiki/Blu-ray_Disc#Region_codes BluRay region] switching possible. The method described below is using 3 region specific bytes (0x84, 0x85, 0x8C) to change the modelinfo.
 Other modelinfo byte values: 0x81 Reference Tool, 0x82 Debug, 0x83 Japan (00), 0x84 North America (01), 0x85 Europe, Middle East, Africa (04), 0x86 South Korea (05), 0x87 United Kingom, Ireland (03), 0x88 Mexico (11), 0x89 Australia, New Zealand (02), 0x8A Singapore, Malaysia (06), 0x8B Taiwan (07), 0x8C Russia, India (08), 0x8D China (09), 0x8E Hong Kong (12)
 Payloader method prerequisites:
@@ Line 150: / Line 141: @@
 * patchfiles (see below)
+patch4.txt content (3.55 offsets):
+<div style="height:200px; overflow:auto">
-patch4.txt content (3.55 offsets):
 <pre>
 # BD Region A (NTSC) [North America]
@@ Line 191: / Line 183: @@
 EB1C: 0000F380 #syscall 0x363 descriptor
 </pre>
+</div>
 patch5.txt content(3.55 offsets):
+<div style="height:200px; overflow:auto">
 <pre>
 # BD Region B (PAL) [Europe, Middle East, Africa]
@@ Line 232: / Line 227: @@
 EB1C: 0000F380 #syscall 0x363 descriptor
 </pre>
+</div>
 patch6.txt content(3.55 offsets):
+<div style="height:200px; overflow:auto">
 <pre>
 # BD Region C (RUSSIA/INDIA)
@@ Line 273: / Line 271: @@
 EB1C: 0000F380 #syscall 0x363 descriptor
 </pre>
+</div>
 Copy the patch files to /dev_hdd0/game/LV2000000/USRDIR and use LV2 Patcher to select the patch to use. Reboot to return to original state.
+Reference: [http://pastehtml.com/view/1df94sk.html ps3mrenigma blog export]
-Reference:
-[http://pastehtml.com/view/1df94sk.html ps3mrenigma blog export]
 == Hardware Components ==

Bluray Drive: Difference between revisions