Talk:Power Supply: Difference between revisions

From PS3 Developer wiki
Jump to navigation Jump to search
mNo edit summary
Line 1: Line 1:
= Power Supply Unit (PSU) =  
== PSU compatiblity critisism ==
All the PS3 models have a built in universal power supply, and supports multivoltage. What this means is that even though a specific voltage is written on the outside of the PS3, the PS3 can actually be plugged into any voltage anywhere in the world and work (as long as you have the correct cable). Therefore, if you opened up the PS3, the supported voltages should be stated (on the power supply) as 100V-240V, which is the range for all power outlets in the world.


== Travel Transformers ==
<pre>The earliest batch of PS3 had the ZSSR5391A power supply, which as you can see in the above table draws a lot of amps from your power outlet. You can replace it with newer compatible power supply models that draw less power, and also produce less heat.
Don't use an external transformer! Use only a passive travelplug, quote from the PS3 manuals:


:''Do not connect the AC power cord to a voltage transformer or inverter. Converting the AC power cord to a voltage transformer for overseas travel or use in an autmobile may cause heat to build up in the system and may cause burns or a malfunction.''
The second criteria is to try to find the lowest input amp and lowest output amp that works with your PS3 model (for APS models, this means the higher the model number, the better).</pre>
 
The above is wrong in stating that:
== PSU Model @ SKU compatiblity ==
* The output rating is a measurement for how much power the PSU itself uses (e.g. its efficiency)
Here is a sample of some power supply model numbers:
* That it is better to get a PSU that has a lower rating which has littler headroom
{|class="wikitable"
|-
! Model || Power Input (AC) || colspan="2" | Power Output (DC) || Pins || Weight || Found In || Compatibility
|-
| ZSSR5391A || 100V-240V 6.0A || 12V 32A || 5V 3A || 5 || 815g || CECHA, CECHB || A B
|-
| APS-226 || 100V-240V 4.8-2.0A || 12V 32A || 5V 3A || 5 || 770g || CECHA || A B
|-
| APS-227 || 100V-240V 2.2A || 12V 32A || 5V 3A || 5 || 900g || CECHC || C
|-
| APS-231 || 100V-240V 3.5-1.5A || 12V 23.5A || 5V .6A || 5 || 700g || CECHG || A B E G
|-
| EADP-300AB || 100V-240V 3.6-1.5A || 12V 23.5A || 5V .6A || 3 || || CECHH || H
|-
| APS-239 || 100V-240V || 12V 23.5A || 5V .6A || 4 || || CECHK || H K
|-
| EADP-260AB || 100V-240V 3.3-1.4A || 12V 21.5A || 5V .6A || 3 || || CECHJ, CECHK || H K (Some L)
|-
| APS-240 || 100V-240V 3.3-1.4A || 12V 21A || 5.5V .9A || 4 || || CECHL || L P
|-
| EADP-260BB || 100V-240V 3.3-1.4A || 12V 21A || 5.5V .9A || 4 || 600g || || 1-474-129-11
|-
| APS-250 || 100V-240V 2.7-1.2A || 12V 18A || 5.5V .9A || 4 || || CECH-20xx || 20xx
|-
| EADP-200DB || 100V-240V 2.6-1.0A || 12V 16A || 5.5V .9A || 4? || || CECH-21xx<br/>CECH-25xx || 21xx, 25xx, ?
|-
| APS-270 || 100V-240V 2.6-1.1A || 12V 16A || 5.5V .9A || 4? || || CECH-25xx || 25xx, ?
|-
|}
 
As seen from the above chart, the PS3 takes 100V-240V AC (Alternating Current) at various amps (A) from your power socket, and converts this to two DC (Direct Current) voltages of 12V, and 5V (or 5.5V for later PS3 models) at various amps. The earliest batch of PS3 had the ZSSR5391A power supply, which as you can see in the above table draws a lot of amps from your power outlet. You can replace it with newer compatible power supply models that draw less power, and also produce less heat. Less heat means less bending of the motherboard, less cracking of the solder, less fan noise, lower electricity bills, and no "Yellow Light of Death." In fact, for most models of the PS3, you can find a better power supply to replace the original. One of the main compatibility criteria is the number of pins on the power supply. It must match the number of pins on your connector cable. The second criteria is to try to find the lowest input amp and lowest output amp that works with your PS3 model (for APS models, this means the higher the model number, the better). WARNING: if you decide to replace your power supply, you do it at your own risk! If you don't know what you are doing, you may fry your motherboard.
 
For those that are not aware: Volts * Amps = Total Watts used.
You are billed for total watts used over time by your local power provider.
 
 
A sample breakdown of the CECHJ and later models finds a 261W Delta EADP-260AB power supply. It is fanless and all capacitors inside are made by Japanese companies: Chemi-Con, Rubycon, and Nichicon.
 
Note that for PS3 Slim models (CECH-20xx), there is no ground wiring support.
 
source: http://www.edepot.com/playstation3.html#PS3_Power_Supply
 
== Pinouts ==
 
=== ZSSR5391A ===
 
{|class="wikitable"
|-
! Pin # !! Name !! Description
|-
| 1 ||  ||
|-
| 2 ||  ||
|-
| 3 ||  ||
|-
| 4 ||  ||
|-
| 5 ||  ||
|-
|}
 
 
=== APS-226 ===
 
{|class="wikitable"
|-
! Pin # !! Name !! Description
|-
| 1 ||  ||
|-
| 2 ||  ||
|-
| 3 ||  ||
|-
| 4 ||  ||
|-
| 5 ||  ||
|-
|}
 
=== APS-227 ===
 
{|class="wikitable"
|-
! Pin # !! Name !! Description
|-
| 1 ||  ||
|-
| 2 ||  ||
|-
| 3 ||  ||
|-
| 4 ||  ||
|-
| 5 ||  ||
|-
|}
 
=== APS-231 ===
 
{|class="wikitable"
|-
! Pin # !! Name !! Description
|-
| 1 ||  ||
|-
| 2 ||  ||
|-
| 3 ||  ||
|-
| 4 ||  ||
|-
| 5 ||  ||
|-
|}
 
=== EADP-300AB ===
 
{|class="wikitable"
|-
! Pin # !! Name !! Description
|-
| 1 ||  ||
|-
| 2 ||  ||
|-
| 3 ||  ||
|-
|}
 
=== APS-239 ===
 
{|class="wikitable"
|-
! Pin # !! Name !! Description
|-
| 1 ||  ||
|-
| 2 ||  ||
|-
| 3 ||  ||
|-
| 4 ||  ||
|-
|}
 
=== EADP-260AB ===
 
{|class="wikitable"
|-
! Pin # !! Name !! Description
|-
| 1 ||  ||
|-
| 2 ||  ||
|-
| 3 ||  ||
|-
|}
 
=== APS-240 ===
 
{|class="wikitable"
|-
! Pin # !! Name !! Description
|-
| 1 ||  ||
|-
| 2 ||  ||
|-
| 3 ||  ||
|-
| 4 ||  ||
|-
|}
 
=== EADP-260BB ===
 
{|class="wikitable"
|-
! Pin # !! Name !! Description
|-
| 1 ||  ||
|-
| 2 ||  ||
|-
| 3 ||  ||
|-
| 4 ||  ||
|-
|}
 
=== APS-250 ===
 
{|class="wikitable"
|-
! Pin # !! Name !! Description
|-
| 1 ||  ||
|-
| 2 ||  ||
|-
| 3 ||  ||
|-
| 4 ||  ||
|-
|}
 
=== EADP-200DB ===
 
{|class="wikitable"
|-
! Pin # !! Name !! Description
|-
| 1 ||  ||
|-
| 2 ||  ||
|-
| 3 ||  ||
|-
| 4 ||  ||
|-
|}
 
=== APS-270 ===
 
{|class="wikitable"
|-
! Pin # !! Name !! Description
|-
| 1 ||  ||
|-
| 2 ||  ||
|-
| 3 ||  ||
|-
| 4 ||  ||
|-
|}

Revision as of 20:39, 5 July 2011

PSU compatiblity critisism

The earliest batch of PS3 had the ZSSR5391A power supply, which as you can see in the above table draws a lot of amps from your power outlet. You can replace it with newer compatible power supply models that draw less power, and also produce less heat.

The second criteria is to try to find the lowest input amp and lowest output amp that works with your PS3 model (for APS models, this means the higher the model number, the better).

The above is wrong in stating that:

  • The output rating is a measurement for how much power the PSU itself uses (e.g. its efficiency)
  • That it is better to get a PSU that has a lower rating which has littler headroom
Retrieved from "http://www.psdevwiki.com/ps3/index.php?title=Talk:Power_Supply&oldid=2457"