Talk:Bluedisk EID0 reDRM: Difference between revisions
m (→Footnote) |
m (→Footnote) |
||
Line 59: | Line 59: | ||
Should be able to use firmwares with spkg fix, e.g. http://mir.cr/04Q0SMC9 | Should be able to use firmwares with spkg fix, e.g. http://mir.cr/04Q0SMC9 - http://mir.cr/4CNXBQEA |
Revision as of 17:06, 29 March 2013
This is a good place to document changes made in MFWs 4.x (and their bugs)
Feel free to post/contribute
4.30 CEX checkoff
Use NOR patches only on NOR consoles, not on NAND!
Target area | Patchfile | NOR Offset | Paste length | Remarks |
---|---|---|---|---|
ROS0 | ros0 (7 MB) | 0x0C0010 | 0x6FFFE0 | CoreOS (4.30 OFW with : lv0, lv1.self, lv2_kernel.self and spu_pkg_rvk_verifier.self patched) |
ROS1 | ros1 (7 MB) | 0x7C0010 | 0x6FFFE0 | CoreOS (SAME as ros0) |
trvk_prg0 (0x40000) | trvk_prg0 (128 KB) | 0x40000 | 0x20000 | Program Revoke |
trvk_prg1 (0x60000) | trvk_prg0 (128 KB) | 0x60000 | 0x20000 | Program Revoke (same as trvk_prg0) |
trvk_pkg0 (0x80000) | trvk_pkg0 (128 KB) | 0x80000 | 0x20000 | Package Revoke |
trvk_pkg1 (0xA0000) | trvk_pkg0 (128 KB) | 0xA0000 | 0x20000 | Package Revoke (same as trvk_pkg0) |
Patchset - 430_CEX_checkoff
(above patches in a single package + autopatcher file: 430_CEX_checkoff.rar)
Reports
...
Patchset - 4.30 CEX v2.03
http://www.mirrorcreator.com/files/0NW6OQPQ/356enforced_2500_dump.rar_links
DB A5 3B 0A B5 18 1D 97 15 24 61 5B = 3.56+ enforced metldr (non .2) ROS0: 431.000 ROS1: 430.000
alternate patchset based on 2.03 : http://www.mirrorcreator.com/files/1IWZNMAS/4.3x_CEX_203_checkoff.rar_links
Reports
errors after patching (same errors when using 2.03 and the other checkoff) - tested with E3, Rebug 4.30.1, Rogero 4.30 2.03 :
- Update error 0x8002F2B5 Error with installing Firmware update. The PUP is not recognised as valid update.
- no usefull update data
- no update data found
Patchset - 4.30 CEX v2.06
alternate patchset based on 2.06 : [1] [2]
MD5: 8e4df61243396c46f24b73b3ff5a3785 | SHA1: 8bd2eabbd9f982a75ebaaec4f2a22666f7960fe3
Reports
working (no blackscreen or update errors)
Footnote
Note: patches are in human readable byteorder, not bytereversed like E3. You need to bytereverse the dump first, then patch, and bytereverse again if you have E3.
Should be able to use firmwares with spkg fix, e.g. http://mir.cr/04Q0SMC9 - http://mir.cr/4CNXBQEA