SC Communication: Difference between revisions
Jump to navigation
Jump to search
mNo edit summary |
m (0x1F) |
||
| Line 3: | Line 3: | ||
* The following information was reverse engineered from lv0ldr, lv0, lv1, and sc_iso.self. | * The following information was reverse engineered from lv0ldr, lv0, lv1, and sc_iso.self. | ||
* Big thanks to graf_chokolo for a large part of the basis of this page! | * Big thanks to graf_chokolo for a large part of the basis of this page, and to Jestero for Syscon Authentication info! | ||
=Overview of Syscon Communication= | =Overview of Syscon Communication= | ||
| Line 46: | Line 46: | ||
|- | |- | ||
| 0x18 || Livelock(?) Service - Checks for permission to use other services | | 0x18 || Livelock(?) Service - Checks for permission to use other services | ||
|- | |||
| 0x1F || Authenticated Services | |||
|- | |- | ||
| 0xFF || Syscon Init (Seen in lv0ldr init sequence to syscon: http://www.ps3devwiki.com/wiki/User_talk:JuanNadie) | | 0xFF || Syscon Init (Seen in lv0ldr init sequence to syscon: http://www.ps3devwiki.com/wiki/User_talk:JuanNadie) | ||
|} | |} | ||
=Syscon Authentication= | |||
To be completed... | |||
Revision as of 01:21, 19 January 2013
Introduction
- The following information was reverse engineered from lv0ldr, lv0, lv1, and sc_iso.self.
- Big thanks to graf_chokolo for a large part of the basis of this page, and to Jestero for Syscon Authentication info!
Overview of Syscon Communication
- Syscon lives at the mmio space of 0x24000080000.
- Communication occurs through mmio read/writes.
List of known offsets in Syscon:
| Offset (from start of address space) | Size | Description |
|---|---|---|
| 0xC000 | 0xFF0 | Syscon packet send area |
| 0xCFF0 | 0x4 | Syscon sent packet counter |
| 0xCFF4 | 0x4 | Syscon sent packet acknowledge counter |
| 0xD000 | 0xFF0 | Syscon packet receive area |
| 0xDFF0 | 0x4 | Syscon received packet counter |
| 0xDFF4 | 0x4 | Syscon received packet acknowledge counter |
| 0xE100 | 0x4 | Tells syscon there is a packet to be received |
Quick explanation of the packet counters:
- There are two counters that are incremented by each side (Cell / Syscon).
- 0xCFF0 and 0xDFF0 are incremented by the sending side (Syscon for 0xCFF0, Cell for 0xDFF0)
- 0xCFF4 and 0xDFF4 are incremented by the receiving side (Cell for 0xCFF4, Syscon for 0xDFF4)
Syscon Services
- To be completed...
| Service ID | Description |
|---|---|
| 0x14 | NVS Service - Used for eeprom read/write (Non-Volatile Storage?) |
| 0x18 | Livelock(?) Service - Checks for permission to use other services |
| 0x1F | Authenticated Services |
| 0xFF | Syscon Init (Seen in lv0ldr init sequence to syscon: http://www.ps3devwiki.com/wiki/User_talk:JuanNadie) |
Syscon Authentication
To be completed...