Template:Winbond 25X16AVSIG: Difference between revisions
Jump to navigation
Jump to search
m (Changed protection level for "Template:Winbond 25X16AVSIG" ([edit=autoconfirmed] (indefinite) [move=autoconfirmed] (indefinite))) |
mNo edit summary |
||
| Line 1: | Line 1: | ||
[[Category:Templates]] | |||
<div style="float:right">[[File:W25X16A - SOIC-8.png|200px|thumb|left|8-pin TSSOP<br />Winbond 25X16A<br />SOIC-8 pinout]] | <div style="float:right">[[File:W25X16A - SOIC-8.png|200px|thumb|left|8-pin TSSOP<br />Winbond 25X16A<br />SOIC-8 pinout]] | ||
<br /></div> | <br /></div> | ||
Revision as of 09:51, 9 January 2012
W - Winbond 25X - SPI Flash with 4KB sectors/64Kbyte blocks, dual output 16A - 16Mbit / 2M-byte V - Supply Voltage 2.7 to 3.6V S - Package Type : 8pin SOIC 150-mil I - Temperature Range: Industrial (-40'C ~ 85'C) G - Environment: Green Package (Lead-free, RoHS Compliant, Halogen-free (TBBA), Antimony-Oxie-free)
datasheet: W25X16A.pdf (1.3 MB)
Note: can use Bus Ninja or Bus Pirate and FlashROM - ISP is possible, so long as no other devices on the SPI bus are trying to access the device (in that case, you might want to cut Vcc to the FPGA or the regulator for it).
| Pin | Usage | I/O | Remarks |
|---|---|---|---|
| 1 | /CS | I | Chip Select (high=deselect, low=select) |
| 2 | DO | O | Data output |
| 3 | /WP | I | Write Protect (active low) |
| 4 | GND | Ground | |
| 5 | DIO | I/O | Serial data input/output |
| 6 | CLK | I | Serial Clock |
| 7 | /HOLD | I | Hold (high=normal/resume, low=hold/pause) |
| 8 | VCC | Vcc (min 2.7-max 3.6V @ Fr0 75MHz / min 3.0-max 3.6V @ Fastread Fr1 100MHz) |