Revision as of 17:14, 22 September 2011

http://www.multiupload.com/ULBPNLOHJ7 (143.1 MB)
http://www.multiupload.com/MDNVQSFL00 (143.1 MB)
http://www.multiupload.com/O737BH53N6 (143.1 MB)
http://www.multiupload.com/EOG7ABG05F (143.1 MB)
http://www.multiupload.com/CSG2IHRESD (143.1 MB)
http://www.multiupload.com/AL658V0ZUU (143.1 MB)
http://www.multiupload.com/W5BIRAZTUM (143.1 MB)
http://www.multiupload.com/BR410045AK (143.1 MB)
http://www.multiupload.com/RFPAKBP1BD (27.7 MB)

sept 15 2011 (.git's for mirror):

  ps3.tar.gz (793.32 MB)
    -or-
  ps3.part01.rar (95.78 MB)
  ps3.part02.rar (95.78 MB)
  ps3.part03.rar (95.78 MB)
  ps3.part04.rar (95.78 MB)
  ps3.part05.rar (95.78 MB)
  ps3.part06.rar (95.78 MB)
  ps3.part07.rar (95.78 MB)
  ps3.part08.rar (68.42 MB)
note: you need to have git installed, and use it e.g.:
 git clone E:\ps3\ps3linux\ps3-jupiter.git

sept 15 2011 (cloned version and site mirror version):

  ps3.tar.gz (1.3 GB) (Including wireless slim drivers for linux)

Features

Into HV integrated OtherOS bootloader loader (compatible with OtherOS bootloader on 3.15)
OtherOS bootloader is booted directly from HV, no GameOS is involved.
Process of booting OtherOS bootloader loader is very similar to 3.15 method
Booting Linux from HDD/USB/BD/Network
Linux with GameOS rights
Full access to all HV SS services (Dispatcher Manager) from GameOS or Linux
Full access to all System Manager services
Ability to create/modify/remove repository nodes in LPAR 1 (e.g. with ps3dm-utils or ps3hvc-utils).
This ability gives you much power over the whole system because many layers of PS3 use repository nodes to exchange information.
Enabled QA mode in Update Manager
Downgrading without USB dongle or Service Mode
Ability to deactivate/activate HDD/VFLASH encryption (e.g. with ps3stor-utils)
Support for ps3-utils. You can flash new OtherOS bootloader from Linux e.g.

QA Flag

Reports state if you flag your ps3 you will lose all psn .act files making any bought psn content unuseable (warning: these are dev tools, remember this.)

SS Patches

Do not use these pups if you play games via backup managers of your legal games. You will get trophy errors. You need this patch to use ps3dm,sm, and other ps3 dev tools. We're currently working on a patch in petitboot so it only runs when you use linux and not mess with GameOS backup managers -> use dispmgr_access.sh

OtherOS++ How-To

Referenced from http://www.gitbrew.org/otheros/

PS3 Models

PS3 Fat (NAND):

CECHA = 256MB
CECHB = 256MB
CECHC = 256MB
CECHE = 256MB
CECHG = 256MB

PS3 Fat (NOR):

CECHH = 16MB
CECHJ = 16MB
CECHK = 16MB
CECHL = 16MB
CECHM = 16MB
CECHP = 16MB
CECHQ = 16MB

PS3 Slim (NOR):

CECH-20..A = 16MB
CECH-20..B = 16MB
CECH-21..A = 16MB
CECH-21..B = 16MB
CECH-250.A = 16MB
CECH-250.B = 16MB
CECH-251.A = 16MB
CECH-251.B = 16MB

256MB = NAND, 16 = NOR. Follow Accordingly

Install OtherOS on HDD (for all PS3 models)

All tools are here: http://gitbrew.org/~glevand/ps3/

NOTICE: All my tools should beep. If you don't get beep during one of the steps below
then stop doing anything and contact me. I will help.
OtherOS++ support: irc.gitbrew.org (ssl) #otheros

ALL PS3 MODELS ARE SUPPORTED !!!

1. Install my latest CFW
2. When installation is finished, reboot in Recovery Mode (not the Backup/Restore in XMB) and choose "Restore PS3 System"
3. Now your GameOS should use only the half of your HDD
(Currently working on a better approach)
4. Run setup_flash_for_otheros.pkg (for all PS3 models)
5. Reboot (It's important to shut down and turn on your PS3)
6. Store dtbImage.ps3.bin on USB drive, plug it in and run install_otheros.pkg
(NAND owners should use dtbImage.ps3.bin.minimal, rename it to dtbImage.ps3.bin).
Try different USB ports if you don't get any beeps.
7. Run boot_otheros.pkg
8. Run reboot.pkg (use the package, not manually reboot!)
9. You should be in petitboot now.
Exit from CUI to shell or switch to another virtual console.
10. Run script create_hdd_region.sh
11. Reboot and boot petitboot again
12. You should see now new HDD device on petitboot, /dev/ps3dd.
That's your OtherOS HDD region.
Don't touch any other HDD regions if you don't know what you are doing. Use only ps3dd
device for your Linux installation. Use parted to partition it and create GPT partition
table on ps3dd. GPT is supported by both, Linux and FreeBSD.

Be warned, if you damage your GameOS HDD region, GameOS will reformat HDD and
remove your Linux HDD region in the process. You have to do the above steps again.
Don't mess with GameOS HDD region and GameOS won't mess with your OtherOS HDD region.

For users who installed OtherOS on VFLASH region 7 previously

You have to restore your VFLASH before doing the above steps.
Be warned, this step is NOT for NAND owners.
1. Install my latest petitboot
2. Boot petitboot
3. Run script restore_vflash.sh
4. Reboot. GameOS should reformat your HDD again.

Partition the PS3 Drive

1. parted /dev/ps3dd
2. mklabel gpt
3. mkpart primary 0 2GB
4. print
5. mkpart primary 2GB (the rest of the hard drive here.)
6. quit.

In case you need it: full manual of Parted

You may now continue to Install Linux // (google-cache)

PS3:Linux

Example

Generic Guide to install any PPC64 Linux Distro (vflash only)

umount ps3db
umount ps3dc
wget http://gitbrew.org/~glevand/ps3/scripts/hdd_access.sh
chmod a+x hdd_access.sh
./hdd_access.sh
kexec -l vmlinuz --initrd of the distro you want to install

Fedora

Installed with Fedora 9 Full DVD Tested on Slim PS3 (3.55) & Phat PS3 (3.15)

When installing Fedora 9, when you are asked about partitioning, choose "Custom layout" and select ps3da.

3.55 (Custom CFW)

umount ps3db
umount ps3dc
./hdd_access print|patch|restore?
mkdir /mnt/fedora
cp /tmp/petitboot/mnt/sr0/ppc/ppc64/* /mnt/fedora
kexec -l vmlinuz --initrd=ramdisk.image.gz

Reboot the PS3 and it will start the installer

NOTE: When installing Fedora 9 (possibly all versions), choose "Custom layout" and select ps3da. The hdd_access.sh script disables ps3da-c and makes it so that ps3dd reads as the "first" hard drive. After the installer finishes, DO NOT HIT REBOOT. You must unplug or hardware reset your console.

3.15 PHAT (Stock OFW)

Put petitboot on a memory stick

mkdir -p /media/usbstick/PS3/otheros/
wget http://www.kernel.org/pub/linux/kernel/people/geoff/cell/ps3-petitboot/otheros.bld
cp ./otheros.bld /media/usbstick/PS3/otheros/otheros.bld

Boot into GameOS
- XBM>Settings>System Settings>Other OS>
- Settings>System Settings>Default System>Other OS>Yes

Boot into petitboot and load up a dvd with Fedora Core[1] on it :D

NAND 3.15 Notes before Tweaks

Your hdd is ps3da. Pay attention to the guide and substitude ps3dd with ps3da
Know which partitions are which and don't go mkswap'ing your root partition
Do not use hdd_access to configure your hdds
You must patch your kernel with glevand's patch / obtain a patched kernel in order to do certain things and compile certain tools.

Tweaks

umount /dev/ps3dd2
mkdir /mnt/fedora
mount /dev/ps3dd2 /mnt/fedora
nano /mnt/fedora/etc/yaboot.conf
- rename "linux" to "Fedora"
- remove UUID=* from arguments and save
- NAND 3.15 ONLY:change boot from /dev/sdd (or whatever) to ps3da (or whichever drive yours shows up as, not the partition)
- NAND 3.15 ONLY:add root=/dev/ps3da1
- NAND 3.15 ONLY:Example yboot.conf[2]
nano /mnt/Fedora/etc/sudoers
- append your user under root
- If you cannot write to sudoers file:
  - chmod u+w /mnt/Fedora/etc/sudoers
  - edit
  - chmod 0440 /mnt/Fedora/etc/sudoers.

 
root     ALL=(ALL) ALL
snowy    ALL=(ALL) ALL

each time you boot in petitboot, press e on "Fedora" and change ps3da2 to ps3dd2 for both vmlinuz and ramdisk. (temporary)
- Unless you followed the NAND 3.15 ONLY step previously.
when you boot into fedora for the first time, make the user (same as you did in sudoers) account now.
when prompted to login hit alt + ctrl + f1
log in
sudo su
nano /etc/udev/rules.d/10-ps3da1swap.rules

KERNEL=="ps3da1", ACTION=="add", RUN+="/sbin/mkswap /dev/ps3da1", RUN+="/sbin/swapon -p 1 /dev/ps3da1"

nano /etc/udev/rules.d/10-ps3vram.rules


# udev rules to automatically enable swap on /dev/ps3vram
# Copy this file to /etc/udev/rules.d/10-ps3vram-swap.rules
# Choose only one of the rules below

# Initialize and enable swap unconditionally
KERNEL=="ps3vram", ACTION=="add", RUN+="/sbin/mkswap /dev/ps3vram", RUN+="/sbin/swapon -p 10 /dev/ps3vram"

# Initialize using /etc/fstab and standard init scripts
# KERNEL=="ps3vram", ACTION=="add", RUN+="/bin/bash -c '/bin/grep -q ^/dev/ps3vram[[:space:]]*swap /etc/fstab && /sbin/mkswap /dev/ps3vram'"

Fedora is now installed and configured.

Debian

Debootstrap HOWTO by glevand ([email protected])
-------------------------------------------------------

Links:

* http://www.debian.org/releases/stable/i386/apds03.html.en
* https://help.ubuntu.com/6.10/ubuntu/installation-guide/i386/linux-upgrade.html

Installing Debian Squeeze with debootstrap on petitboot
--------------------------------------------------------

- Configuring the base system

1. umount /dev/ps3dd2
2. mkdir /mnt/debian
3. mkfs.ext3 /dev/ps3dd2
4. mount /dev/ps3dd2 /mnt/debian
5. rm -rf /mnt/debian/*
6. debootstrap --arch powerpc squeeze /mnt/debian http://ftp.us.debian.org/debian
7. mount -t proc none /mnt/debian/proc
8. mount --rbind /dev /mnt/debian/dev
9. LANG=C chroot /mnt/debian /bin/bash
10. export TERM=xterm-color

- Mounting partitions

File /etc/fstab
----------------

/dev/ps3dd2			/			ext3		defaults		        	0 1
/dev/ps3vram		        none		        swap		sw					0 0
/dev/ps3dd1			none		        swap		sw					0 0
/dev/sr0			/mnt/cdrom	        auto		noauto,ro		        	0 0
proc				/proc		        proc		defaults		        	0 0
shm			        /dev/shm        	tmpfs		nodev,nosuid,noexec             	0 0

- Setting timezone

1. vi /etc/default/rcS
2. dpkg-reconfigure tzdata

- Configuring networking

1. echo "Name of your computer here" > /etc/hostname

File /etc/network/interfaces
-----------------------------

auto lo
iface lo inet loopback

auto eth0
iface eth0 inet dhcp

File /etc/resolv.conf (cat /etc/resolv.conf, if you see nameservers already skip this step)
----------------------

nameserver 192.168.1.1

- Configuring apt

File /etc/apt/sources.list
---------------------------
deb http://ftp.us.debian.org/debian squeeze main
deb-src http://ftp.us.debian.org/debian squeeze main

deb http://security.debian.org/ squeeze/updates main
deb-src http://security.debian.org/ squeeze/updates main

1. aptitude update

- Configuring locales and keyboard

1. aptitude install locales
2. dpkg-reconfigure locales
3. aptitude install console-data
4. dpkg-reconfigure console-data

- Finishing touches

1. tasksel install standard
2. aptitude clean
3. passwd
4. aptitude install git build-essential ncurses-dev
5. mkswap /dev/ps3dd1
6. swapon /dev/ps3dd1

- Installing kernel

1. cd /usr/src
2. git clone git://git.gitbrew.org/ps3/ps3linux/linux-2.6.git
3. ln -sf linux-2.6 linux
4. cd linux
5. cp ps3_linux_config .config
6. make menuconfig
7. make
8. make install
9. make modules_install

If you compile your kernel on PS3 then make sure you activate swap because
compiling kernel needs much RAM. I used /dev/ps3dd1 as swap which
you have to create with fdisk first of course or some other program.

- Creating kboot.conf
1. ls /boot/
2. edit kboot.conf and replace what you see for > vmlinux-2.6.* from below (example. vmlinux-2.6.38-gf77c53d)

File /etc/kboot.conf
---------------------

debian=/boot/vmlinux-2.6.* root=/dev/ps3dd2
debian_Hugepages=/boot/vmlinux-2.6.* root=/dev/ps3dd2 hugepages=1

- Creating /dev/ps3flash device (needed for ps3-utils)

File /etc/udev/rules.d/70-persistent-ps3flash.rules
----------------------------------------------------

KERNEL=="ps3vflashf", SYMLINK+="ps3flash"

Ubuntu

Debootstrap HOWTO by glevand ([email protected]) 
(Redone by snowy)
(Updated by thom)
-------------------------------------------------------
Installing Ubuntu Lucid (10.04) with debootstrap on petitboot
--------------------------------------------------------
For different versions of Ubuntu, just change all occurrences of lucid, to natty or whatever build you would like.

You can also edit the config files in whatever text editor you would like. Nano and Vi are the preferred text editors

- Configuring the base system

1. umount /dev/ps3dd2
2. mkdir /mnt/ubuntu
3. mkfs.ext3 /dev/ps3dd2
4. mount /dev/ps3dd2 /mnt/ubuntu
5. rm -rf /mnt/ubuntu/*
6. debootstrap --arch powerpc lucid /mnt/ubuntu http://ports.ubuntu.com
7. mount -t proc none /mnt/ubuntu/proc
8. mount --rbind /dev /mnt/ubuntu/dev
9. LANG=C chroot /mnt/ubuntu /bin/bash
10. export TERM=xterm-color

- Mounting partitions
if you want to use nano editor you will need to type "apt-get install nano" without quotes

File /etc/fstab
----------------

/dev/ps3dd2			/		ext3		defaults			0 1
/dev/ps3vram			none		swap		sw				0 0
/dev/ps3dd1			none		swap		sw				0 0
/dev/sr0			/mnt/cdrom	auto		noauto,ro			0 0
proc				/proc		proc		defaults			0 0
shm				/dev/shm	tmpfs		nodev,nosuid,noexec		0 0

- Setting timezone

1. dpkg-reconfigure tzdata

- Configuring networking

1. echo "Name of your computer here" > /etc/hostname

File /etc/network/interfaces
-----------------------------

auto lo
iface lo inet loopback

auto eth0
iface eth0 inet dhcp

File /etc/resolv.conf (cat /etc/resolv.conf, if you see nameservers already skip this step)
----------------------

nameserver 192.168.1.1

- Configuring apt

File /etc/apt/sources.list
---------------------------
deb http://ports.ubuntu.com/ubuntu-ports/ lucid-updates main restricted
deb-src http://ports.ubuntu.com/ubuntu-ports/ lucid-updates restricted
deb http://ports.ubuntu.com/ubuntu-ports/ lucid universe
deb http://ports.ubuntu.com/ubuntu-ports/ lucid-updates universe
deb http://ports.ubuntu.com/ubuntu-ports/ lucid multiverse
deb http://ports.ubuntu.com/ubuntu-ports/ lucid-updates multiverse
deb http://ports.ubuntu.com/ubuntu-ports/ lucid-security main restricted
deb-src http://ports.ubuntu.com/ubuntu-ports/ lucid-security main restricted
deb http://ports.ubuntu.com/ubuntu-ports/ lucid-security universe
deb-src http://ports.ubuntu.com/ubuntu-ports/ lucid-security universe
deb http://ports.ubuntu.com/ubuntu-ports/ lucid-security multiverse
deb-src http://ports.ubuntu.com/ubuntu-ports/ lucid-security multiverse

OR (Use the following if you have trouble with above sources.)

deb http://ports.ubuntu.com/ubuntu-ports/ lucid main restricted
deb-src http://ftp.usf.edu/pub/ubuntu/ lucid main restricted
deb http://ports.ubuntu.com/ubuntu-ports/ lucid-updates main restricted
deb-src http://ftp.usf.edu/pub/ubuntu/ lucid-updates main restricted
deb http://ports.ubuntu.com/ubuntu-ports/ lucid universe
deb-src http://ftp.usf.edu/pub/ubuntu/ lucid universe
deb http://ports.ubuntu.com/ubuntu-ports/ lucid-updates universe
deb-src http://ftp.usf.edu/pub/ubuntu/ lucid-updates universe
deb http://ports.ubuntu.com/ubuntu-ports/ lucid multiverse
deb-src http://ftp.usf.edu/pub/ubuntu/ lucid multiverse
deb http://ports.ubuntu.com/ubuntu-ports/ lucid-updates multiverse
deb-src http://ftp.usf.edu/pub/ubuntu/ lucid-updates multiverse
deb http://ports.ubuntu.com/ubuntu-ports/ lucid-backports main restricted universe multiverse
deb http://ports.ubuntu.com/ubuntu-ports/ lucid-security main restricted
deb-src http://ports.ubuntu.com/ubuntu-ports/ lucid-security main restricted
deb http://ports.ubuntu.com/ubuntu-ports/ lucid-security universe
deb-src http://ports.ubuntu.com/ubuntu-ports/ lucid-security universe
deb http://ports.ubuntu.com/ubuntu-ports/ lucid-security multiverse
deb-src http://ports.ubuntu.com/ubuntu-ports/ lucid-security multiverse
deb http://ports.ubuntu.com/ubuntu-ports/ lucid-proposed restricted main multiverse universe


1. apt-get update

- Configuring locales and keyboard

1. apt-get install locales
2. dpkg-reconfigure locales
3. apt-get install console-data
4. dpkg-reconfigure console-data

- Finishing touches

1. tasksel install standard
2. apt-get clean
3. passwd
4. apt-get install build-essential ncurses-dev git-core gitosis
5. mkswap /dev/ps3dd1
6. swapon /dev/ps3dd1

- Installing kernel

1. cd /usr/src
2. git clone git://git.gitbrew.org/ps3/ps3linux/linux-2.6.git
3. ln -sf linux-2.6 linux
4. cd linux
5. cp ps3_linux_config .config
6. make menuconfig
7. make
8. make install
9. make modules_install

If you compile your kernel on PS3 then make sure you activate swap because
compiling kernel needs much RAM. I used /dev/ps3dd1 as swap which
you have to create with fdisk first of course or some other program.

- Creating kboot.conf
1. ls /boot/
(After running ls /boot/, look for vmlinux... in this directory, and user it's fiel name in the next commmand.)
2. edit kboot.conf and replace what you see for > vmlinux-2.6.* from below (example. vmlinux-2.6.38-gf77c53d)

File /etc/kboot.conf
---------------------

Ubuntu=/boot/vmlinux-2.6.* root=/dev/ps3dd2
Ubuntu_hugepages=/boot/vmlinux-2.6.* root=/dev/ps3dd2 hugepages=1

- Creating /dev/ps3flash device (needed for ps3-utils)

File /etc/udev/rules.d/70-persistent-ps3flash.rules
----------------------------------------------------

KERNEL=="ps3vflashf", SYMLINK+="ps3flash"

Another Way to get Ubuntu on you PS3
-----------------------------------------------
...is to use an Installer-Disk.

1. Download these ISO
[http://cdimage.ubuntu.com/ports/releases/10.04/release/ubuntu-10.04-alternate-powerpc+ps3.iso Ubuntu.10.04.Alternate.PS3.iso]
These is the alternate-installation for PS3. Its a rudimentary installer. He is faster than the graphical one of 
the normal installtaion. 

2. Burn to disk 
it is needed, to burn these image. An installation from usb-pen is with these installation not possible.

3. Installation.
Put the CD in the drive and reboot to pettitboot. Choose the first normal installation.
Follow the instructions. If you get ask for the partition, my proposal is to use the whole linux-partition.
The assistant should choose a port of it for swap. After the installation you cloud chance the swap to ps3vram
The installation-process take a quite a while. (3-4h)
  
4. Post installation
it could be that you have to chance the fstab. (which described which /dev ubuntu mount to what you want)
From Petitboot go to Terminal. cd /tmp/petitboot/mnt/ps3dd1/etc/ and nano fstab.


Ubuntu should run like a weasel (a handicapped)

Post Installation

After you've set up Linux on your PS3... http://wiki.gitbrew.org/index.php/PS3:Tools // (google-cache)

Tools

Information about setting up PS3-specific tools found on git.gitbrew.org can be found at PS3:Tools

Wireless

Setting up wireless requires you to take down networking. You must have a direct connection to your PS3 to continue. More information.

git and build ps3hvc utils
- Get dependencies PS3:Tools#Dependencies
- git clone git://git.gitbrew.org/ps3/ps3linux/ps3hvc-utils.git
- cd ps3hvc-utils
- make && sudo make install
Download glevand's wlan script for your PS3 type: FAT/NAND[4] SLIM/VFlash[5]. You want this in the same directory ps3hvc-utils is in.
Take down current driver
- sudo rrmod ps3_gelic
Run enable_wlan_on_*.sh
- chmod +x enable_wlan_on*.sh
- ./enable_wlan_on*.sh
Bring up new driver
- sudo modprobe ps3_gelic
- sudo /etc/init.d/networking restart
Test wireless card (by seeing available networks)
- sudo iwlist scan

Enabling Wireless with the latest Linux kernel

You don't need to use WLAN script with the latest Linux kernel anymore. Add the following boot parameter to your kboot entry:

ps3_gelic.disable_eurus_ctrl_iface=1

Attention: It will work on PS3 PHAT models only.

Enabling Sound

Sound HOWTO by c4pt and durandal

Check to see that the sound driver is installed
- sudo lsmod | grep snd_ps3
  - if your output shows snd, snd_pcm, and snd_ps3, then continue to the next step, otherwise
  - sudo modprobe snd_ps3
    - if it installs, you're good to go, otherwise, you neen to compile a new kernel
Connect the ps3 sound device to /dev/sound0
- sudo ln -s /dev/snd/pcmC0D0p /dev/sound0
Add yourself to the audio group
- sudo usermod -G audio <username>
Verify that the user was added
- sudo id <username>
- If your username shows audio as a group, move on to the next step
Install either mpg123 or alsamixer to test the sound, using whatever install tools your distribution has
- RHEL, SLES, OpenSUSE, YDL, fc: sudo yum install mpg123 alsamixer
- Debian, Ubuntu: sudo apt-get install mpg123 alsamixer
Reboot the console
- sudo reboot
Play an mp3 to test the sound with either
- mpg123 <some_sound_file.mp3> OR
- alsamixer <some_sound_file.mp3>

Cleaning up Errors

exim4

Error: IPv6 socket creation failed: No such file or directory
Solution: Edit "/etc/exim4/update-exim4.conf.conf" so that it has dc_local_interfaces='127.0.0.1' instead of dc_local_interfaces='127.0.0.1 ; ::'

Error: ALERT: exim paniclog /var/log/exim4/paniclog has non-zero size
Solution: rm -rf /var/log/exim4/paniclog

Kernel

Error: Make error 137 while compiling vmlinux.o
Solution: Activate/make a swap partition

plymouth

Error: You are receiving this error message as the new udevd in Ubuntu Lucid no longer supports mounting its own /dev mount point.
Solution:
- Edit your fstab and add:

dev /dev tmpfs rw 0 0

- Add noplymouth nosplash to your kernel options in /etc/kboot.conf. Example:

ubuntu=/boot/vmlinux root=/dev/ps3dd1 video=ps3fb:mode:133 noplymouth nosplash

Enabling 7th SPU with the latest Linux kernel

Add the following boot parameter to your kboot entry:

spu_base.enumerate_shared=1

To disable it at boot time again, set it to 0.

Attention: Enabling 7th SPU on Linux will make most of SS services unusable because they use the 7th SPU !!!

Screenshot of OpenCL running on 7spu

Alternate precompiled Debian kernels

Origin: https://github.com/DirtyJerz/PS3-Debian-Kernels

install: dpkg -i ./*.deb
modify kboot.conf as needed
that is all.

https://github.com/DirtyJerz/PS3-Debian-Kernels/blob/1907a41ff3d8898175e4c9f414d12e1d345f01f0/linux-headers-2.6.39-ga81e0a7_2.6.39-ga81e0a7-10.00.Custom_powerpc.deb linux-headers-2.6.39-ga81e0a7_2.6.39-ga81e0a7-10.00.Custom_powerpc.deb]
https://github.com/DirtyJerz/PS3-Debian-Kernels/blob/1907a41ff3d8898175e4c9f414d12e1d345f01f0/linux-image-2.6.39-ga81e0a7_2.6.39-ga81e0a7-10.00.Custom_powerpc.deb linux-image-2.6.39-ga81e0a7_2.6.39-ga81e0a7-10.00.Custom_powerpc.deb]

FreeBSD OtherOS++

Crossreference gitbrew.org::PS3:FreeBSD

FreeBSD can be run on PS3 Slim models from HDD with OtherOS++.

All the freebsd related files should be available here: http://gitbrew.org/~glevand/ps3/freebsd/

freebsd
- config
  - PS3 // (backup/mirror: PS3 (4.22 KB))
- kernel-1920x1080
  - kernel // (backup/mirror: kernel (8.25 MB))
  - kernel.symbols // (backup/mirror: kernel.symbols (22.56 MB))
  - linker.hints // (backup/mirror: linker.hints (5.38 KB))
- livecd
  - ps3_freebsd_livecd.iso // (backup/mirror: ps3_freebsd_livecd.iso (341.51 MB))
- loader
  - loader-1920x1080.ps3 // (backup/mirror: loader-1920x1080.ps3 (306.45 KB))
- ps3_world.tar.gz // (backup/mirror: ps3_world.tar.gz (113.92 MB))

Cross-Compiling

You can skip this step and use my precompiled FreeBSD world and kernel: [3] [4] [[5]]

You need a running FreeBSD system to cross-compile your PS3 FreeBSD world and kernel, you don't need a PS3 for that, it may be a different architecture. Once this step is done and you have a running FreeBSD system on your PS3 , you can build FreeBSD world and kernel on PS3 itself.

# git clone git://git.gitbrew.org/ps3/ps3freebsd/freebsd.git
# cd freebsd
# make buildworld buildkernel installkernel installworld distribution TARGET=powerpc TARGET_ARCH=powerpc64 KERNCONF=PS3 DESTDIR=$HOME/ps3_world

When it's finished then you will have a complete FreeBSD world with kernel in directory $HOME/ps3_world.

editted note: "I removed my git repo because there is no need currently. All my patches are officially in HEAD FreeBSD repository. Just use the official SVN repository or GIT mirrors. Here e.g. http://gitorious.org/freebsd"

Rebuilding Loader

If you want to recompile ONLY FreeBSD loader then after you finished compiling FreeBSD world and kernel, do this:

# cd freebsd
# make buildenv TARGET=powerpc TARGET_ARCH=powerpc64
# cd sys/boot
# make all install DESTDIR=$HOME/ps3_world

Rebuilding Kernel

If you want to recompile ONLY FreeBSD kernel then after you finished compiling FreeBSD world and kernel, do this:

# cd freebsd
# make buildkernel TARGET=powerpc TARGET_ARCH=powerpc64 KERNCONF=PS3
# make installkernel TARGET=powerpc TARGET_ARCH=powerpc64 KERNCONF=PS3 DESTDIR=$HOME/ps3_world

Installation

To install a FreeBSD world on your PS3, you will need a running Linux system first currently. Once i build a LiveCD for PS3 FreeBSD you won't need that anymore. I used Debian to install my FreeBSD on PS3.

First create UFS2 filesystem for your FreeBSD. I assume that there is already a free partition on the HDD of your PS3.

# apt-get install ufsutils
# mkfs.ufs /dev/ps3dd3

Then mount it on Debian and copy your PS3 FreeBSD world to this partition, like this:

# mount -t ufs -o ufstype=ufs2 /dev/ps3dd3 /mnt
# cd /mnt
# tar xvzf /root/ps3_freebsd_world.tar.gz
# cp /root/ps3_freebsd_kernel/kernel /mnt/boot/kernel/
# cp /root/ps3_freebsd_kernel/kernel.symbols /mnt/boot/kernel/
# cd
# umount /mnt

Booting

FreeBSD on PS3 is booted by the FreeBSD loader which can be executed by petitboot with kexec. The FreeBSD loader is built during cross-compiling of the FreeBSD world and kernel or you can use my precompiled version. It supports booting of FreeBSD from HDD. My precompiled version boots a FreeBSD kernel from ps3dd3. The HDD partition from which it boots a FreeBSD kernel is hardcoded, if you want to use another HDD partition then you have to change it in the loader and recompile it.

Store your FreeBSD loader on a Linux partition, i stored mine in Debian in /boot directory, and added a new kboot.conf entry on Linux, like this:

# cp /root/loader-1080x1920.ps3 /boot
# cat /etc/kboot.conf
...
...
...
freebsd_loader_hdd=/boot/loader-1080x1920.ps3
...
...
#

Now you can boot your PS3 FreeBSD. Boot petitboot first and choose FreeBSD loader in CUI.

Once, you have a running PS3 FreeBSD system, you can build FreeBSD world and kernel or compile ports on your PS3 itself.

One of the advantages of FreeBSD on PS3 is write access to the GameOS HDD region and the possibility to create valid GameOS HDD partitions.

Ports

Ports allow us to install many useful programs on your FreeBSD.

Extracting ports:

# cd /root
# fetch ftp://ftp7.freebsd.org/pub/FreeBSD/ports/ports-stable/ports.tar.gz
# cd /usr
# tar xvzf /root/ports.tar.gz

Useful programs you will need first:

wget
git
screen
sudo
elinks

Live CD

Compiling World

Change screen resolution in loader and kernel before compiling
Change frame buffer size in kernel if needed

# cd /usr
# git clone git://git.gitbrew.org/ps3/ps3freebsd/freebsd.git src
# cd src
# make buildworld buildkernel installkernel installworld distribution TARGET=powerpc TARGET_ARCH=powerpc64 \
       KERNCONF=PS3 DESTDIR=/root/ps3_world

Compiling Ports

# cd /root/ps3_world/usr
# fetch ftp://ftp7.freebsd.org/pub/FreeBSD/ports/ports-stable/ports.tar.gz
# tar xvzf ports.tar.gz

# mount -t devfs devfs /root/ps3_world/dev
# cp /etc/resolv.conf /root/ps3_world/etc/
# chroot /root/ps3_world /bin/csh
# cd /usr/ports
# cd shells/bash
# make install clean BATCH=yes

Configuring System

/boot/loader.conf

boot_cdrom="YES"

autoboot_delay="-1"

/etc/rc.conf

root_rw_mount="NO"

hostname="freebsd-livecd"

ifconfig_glc0="SYNCDHCP"

keyrate="fast"
keymap="us.iso"
#keymap="fr.iso"
#keymap="german.iso"
scrnmap="NO"
font8x16="iso15-8x16"
font8x14="iso15-8x14"
font8x8="iso15-8x8"

update_motd="NO"
syslogd_enable="NO"
newsyslog_enable="NO"
cron_enable="NO"
hostid_enable="NO"

sendmail_enable="NONE"
sendmail_submit_enable="NO"
sendmail_outbound_enable="NO"
sendmail_msp_queue_enable="NO"

cleanvar_enable="NO"
crashinfo_enable="NO"
virecover_enable="NO"

/etc/fstab

/dev/cd0        /       cd9660  ro      0       0

Changing Login Shell

# chroot ps3_world
# chsh

Creating ISO Image

Exit chroot

# umount /root/ps3_world/dev
# cd ps3_world
# rm -f etc/resolv.conf
# mkisofs -R -l -ldots -allow-lowercase -allow-multidot \
   -V 'PS3 FreeBSD LiveCD' -volset 'PS3 FreeBSD' -hide boot.catalog \
   -o ../freebsd_livecd.iso .

Booting Live CD with OtherOS++

Use CUI or

boot FreeBSD loader from petitboot manually:

# First mount CD if it's not mounted already

# kexec -l /mnt/cdrom/boot/loader.ps3 (or loader-720x480.ps3 or loader-1280x720.ps3)
# reboot

Installing FreeBSD on HDD from Live CD

Links

FreeBSD Handbook: [6]

FreeBSD AvgLiveCD: [7]

FreeBSD LiveCD: [8]

Gitorious - FreeBSD Wiki: [9]

Setting Up A new FreeBSD System: [10]

Installation

To install a FreeBSD world on your PS3, you will need a running Linux system first currently. Once i build a LiveCD for PS3 FreeBSD you won't need that anymore. I used Debian to install my FreeBSD on PS3.

First create UFS2 filesystem for your FreeBSD. I assume that there is already a free partition on the HDD of your PS3.

# apt-get install ufsutils
# mkfs.ufs /dev/ps3dd3

Then mount it on Debian and copy your PS3 FreeBSD world to this partition, like this:

# mount -t ufs -o ufstype=ufs2 /dev/ps3dd3 /mnt
# cd /mnt
# tar xvzf /root/ps3_freebsd_world.tar.gz
# cp /root/ps3_freebsd_kernel/kernel /mnt/boot/kernel/
# cp /root/ps3_freebsd_kernel/kernel.symbols /mnt/boot/kernel/
# cd
# umount /mnt

Booting

FreeBSD on PS3 is booted by the FreeBSD loader which can be executed by petitboot with kexec. The FreeBSD loader is built during cross-compiling of the FreeBSD world and kernel or you can use my precompiled version. It supports booting of FreeBSD from HDD. My precompiled version boots a FreeBSD kernel from ps3dd3. The HDD partition from which it boots a FreeBSD kernel is hardcoded, if you want to use another HDD partition then you have to change it in the loader and recompile it.

Store your FreeBSD loader on a Linux partition, i stored mine in Debian in /boot directory, and added a new kboot.conf entry on Linux, like this:

# cp /root/loader-1080x1920.ps3 /boot
# cat /etc/kboot.conf
...
...
...
freebsd_loader_hdd=/boot/loader-1080x1920.ps3
...
...
#

Now you can boot your PS3 FreeBSD. Boot petitboot first and choose FreeBSD loader in CUI.

Once, you have a running PS3 FreeBSD system, you can build FreeBSD world and kernel or compile ports on your PS3 itself.

One of the advantages of FreeBSD on PS3 is write access to the GameOS HDD region and the possibility to create valid GameOS HDD partitions.

Ports

Ports allow us to install many useful programs on your FreeBSD.

Extracting ports:

# cd /root
# fetch ftp://ftp7.freebsd.org/pub/FreeBSD/ports/ports-stable/ports.tar.gz
# cd /usr
# tar xvzf /root/ports.tar.gz

Useful programs you will need first:

wget
git
screen
sudo
elinks

Live CD

Compiling World

Change screen resolution in loader and kernel before compiling
Change frame buffer size in kernel if needed

# cd /usr
# git clone git://git.gitbrew.org/ps3/ps3freebsd/freebsd.git src
# cd src
# make buildworld buildkernel installkernel installworld distribution TARGET=powerpc TARGET_ARCH=powerpc64 \
       KERNCONF=PS3 DESTDIR=/root/ps3_world

Compiling Ports

# cd /root/ps3_world/usr
# fetch ftp://ftp7.freebsd.org/pub/FreeBSD/ports/ports-stable/ports.tar.gz
# tar xvzf ports.tar.gz

# mount -t devfs devfs /root/ps3_world/dev
# cp /etc/resolv.conf /root/ps3_world/etc/
# chroot /root/ps3_world /bin/csh
# cd /usr/ports
# cd shells/bash
# make install clean BATCH=yes

Configuring System

/boot/loader.conf

boot_cdrom="YES"

autoboot_delay="-1"

/etc/rc.conf

root_rw_mount="NO"

hostname="freebsd-livecd"

ifconfig_glc0="SYNCDHCP"

keyrate="fast"
keymap="us.iso"
#keymap="fr.iso"
#keymap="german.iso"
scrnmap="NO"
font8x16="iso15-8x16"
font8x14="iso15-8x14"
font8x8="iso15-8x8"

update_motd="NO"
syslogd_enable="NO"
newsyslog_enable="NO"
cron_enable="NO"
hostid_enable="NO"

sendmail_enable="NONE"
sendmail_submit_enable="NO"
sendmail_outbound_enable="NO"
sendmail_msp_queue_enable="NO"

cleanvar_enable="NO"
crashinfo_enable="NO"
virecover_enable="NO"

/etc/fstab

/dev/cd0        /       cd9660  ro      0       0

Changing Login Shell

# chroot ps3_world
# chsh

Creating ISO Image

Exit chroot

# umount /root/ps3_world/dev
# cd ps3_world
# rm -f etc/resolv.conf
# mkisofs -R -l -ldots -allow-lowercase -allow-multidot \
   -V 'PS3 FreeBSD LiveCD' -volset 'PS3 FreeBSD' -hide boot.catalog \
   -o ../freebsd_livecd.iso .

Booting Live CD with OtherOS++

Installing FreeBSD on HDD from Live CD

Links

FreeBSD Handbook: [11]

FreeBSD AvgLiveCD: [12]

FreeBSD LiveCD: [13]

Gitorious - FreeBSD Wiki: [14]

Setting Up A new FreeBSD System: [15]

FreeBSD Development

Crossreference: gitbrew.org::FreeBSD Development

Get in touch with me if you want to help with FreeBSD development because there are only 2 developers currently working on FreeBSD PS3 support :(

Till now 0 applications :( Date: 09/20/2011

TODO List

VUART support in bootloader
VUART support in kernel (work in progress)
System Manager, AV and Dispatcher Manager support in kernel (work in progress)
UDF support for BD movies
RSX driver
Sound driver
Use CAM framework for HDD driver like in Blu-Ray driver
FLASH/VFLASH drivers
WiFi driver (work in progress)

VUART (Bootloader)

Should be very simple
Implement common ps3vuart interface which can be used by VUART port drivers
Implement AV VUART only for now in order to be able to read screen size

VUART (Kernel)

What existing kernel framework to use or create a new one ??? Maybe UART framework. UART framework is NOT suitable !!!
Implement ps3vuart_bus.c module which handles VUART interrupts and distributes events to VUART port drivers. ps3vuart_bus should be the child of nexus.
Each VUART port is a child of ps3vuart_bus module.
Use siis driver as an example how to implement device children.
http://fxr.watson.org/fxr/source/dev/siis/siis.c
VUART port drivers for: System Manager, AV and Dispatcher Manager
What is the best way to provide access for user space applications ??? Create character devices for each VUART port. But how to synchronize kernel/user space accesses ?
Provide IOCTL interface for all VUART ports

WLAN

Kernel module if_jpt.c.
Use WLAN driver an as an example how to implement WLAN drivers which handle 802.11 protocol internally.
http://fxr.watson.org/fxr/source/dev/an/if_an.c
http://fxr.watson.org/fxr/source/net/if_tap.c

RSX

I decided to implement RSX driver for FreeBSD first and then for Linux (sorry Linux fans), not because i don't like Linux but because FreeBSD has no X11 driver and it will be easier to test.
FreeBSD DRM framework supports PCI devices only currently :-( Platform devices are NOT supported by FreeBSD's DRM framework.
No choice as to use kernel module with my own user space interface. Yeah, hate me kernel developers, i know, it's ugly but NVIDIA does it too (/dev/nvidia, /dev/nvidiactl and nvidia.ko).

FLASH/VFLASH

Use CAM framework to implement flash drivers, it has more advantages over block device drivers
The drivers are very similar to CDROM driver but they should handle ATA IO commands and SCSI like ps3cdrom driver
Kernel modules: ps3flash for FLASH/VFLASH and ps3nflash for NOR flash only

Links

The Design and Implementation of the FreeBSD SCSI Subsystem: [16]
Writing a CAM SCSI controller driver: [17]
FreeBSD Kernel Reference: [18]
UDF 2.6: [19]
The VFS/VNODE interface in the FreeBSD kernel: [20]
FreeBSD DRI: [21]
FreeBSD Device Drivers: [22]
FreeBSD Kernel Modules: [23] [24]
NEWBUS Intro: [25]
Character Driver: [26] [27]
NVIDIA Kernel Interface: [28]

Cellminer

Auto Installer

Debian: http://git.gitbrew.org/~stackable/script/cellminer-run-ONCE-to-install.sh

Git repository

https://github.com/verement/cellminer

PS3:Tools

General

To ease compilation and finding libraries (which will prevent you from having to edit every Makefile):

sudo ln -s /usr/src/linux-2.6/include/* /usr/local/include/

Development

Dependencies

Almost all tools require git make libc libc-dev libc6-dev-ppc64

sudo apt-get install git make libc libc-dev libc6-dev-ppc64

For Debian Squeeze (and possibly other Distros as well?)

sudo apt-get install git make libc6 libc6-dev libc6-dev-ppc64 libX11-dev

python

aptitude install python python-pytools
- this installs python and pyopencl

Enable RSX RAM as SWAP

sudo su -
swapon -s
- Check current SWAP
mkswap /dev/ps3vram
swapon /dev/ps3vram
vim /etc/udev/rules.d/10-ps3vram-swap.rules

# udev rules to automatically enable swap on /dev/ps3vram
# Copy this file to /etc/udev/rules.d/10-ps3vram-swap.rules
# Choose only one of the rules below
# Initialize and enable swap unconditionally
KERNEL=="ps3vram", ACTION=="add", RUN+="/sbin/mkswap /dev/ps3vram", RUN+="/sbin/swapon -p 10 /dev/ps3vram"

reboot
sudo swapon -s
- Verify additional SWAP space

Notes

Higher priority means the system will use that SWAP sooner than lower priority SWAP. You want RSX RAM to have highest priority.

OpenSSL for ppc64

Check and make sure you're getting the latest source of OpenSSL[29]

Installation

wget http://www.openssl.org/source/openssl-1.0.0d.tar.gz
tar -xvzf openssl*.tar.gz
cd openssl*
vim Makefile or see 'General' section
- You need to add this option to the end of the CFLAGS option list: -I/usr/src/linux-2.6/include
./Configure linux-ppc64
make
make test
sudo make install

Notes

Modification of header files is needed for non-current kernels.

ps3dm-utils

Dependencies

Installation

git clone git://git.gitbrew.org/ps3/ps3linux/ps3dm-utils.git
cd ps3dm-utils/
sudo cp /usr/src/linux-2.6/arch/powerpc/include/asm/ps3dmproxy.h /usr/include/asm/
vim Makefile
- Append -L /usr/local/ssl/include -L /usr/local/ssl/lib -ldl to the end of LDFLAGS
make

Attention: With the latest version of ps3dm-utils you don't need OpenSSL anymore !!!

Notes

ps3dm-utils requires DEVICE to get information from. Normally, /dev/ps3dmproxy is used.
- If /dev/ps3dmproxy does not exist: sudo modprobe ps3dmproxy

IBM Cell SDK 3.1

This works only on Debian & Ubuntu on PS3 All Tools need download form ibmsdk31.tar.gz

Installation

wget -r -H -A.tar.gz http://www.multiupload.com/T6IFLL5SGD
mv */*/*/ibmsdk31.tar.gz ./
rm *multiupload.com* -rf
tar -xvzf ibmsdk31.tar.gz
cd deb/
dpkg -i openrpm/*.deb
dpkg -i devel/*.deb
dpkg -i extra/*.deb

Some of these packages have a newer version, You may want to hold (keep back) these packages:

echo ppu-gcc hold | sudo dpkg --set-selections
echo spu-gcc hold | sudo dpkg --set-selections

Java 6 IBM

Download from: http://goo.gl/ngV0b

mkdir /opt/ibm/java-ppc64-60/
cd /opt/ibm/java-ppc64-60/

Put ibm-java-sdk-6.0-5.0-linux-ppc64.tgz in /opt/ibm/java-ppc64-60/

tar -zxvf ibm-java-sdk-6.0-5.0-linux-ppc64.tgz
chcon -R -t texrel_shlib_t /opt/ibm/java-ppc64-60/jre
chcon -R -t texrel_shlib_t /opt/ibm/java-ppc64-60/bin
chcon -R -t texrel_shlib_t /opt/ibm/java-ppc64-60/lib

ps3mfw

Dependencies

TCL 8.5
- wget http://prdownloads.sourceforge.net/tcl/tcl8.5.9-src.tar.gz
- tar -xvzf tcl*
- cd tcl*
- cd unix
- vim Makefile or see 'General' section
  - You need to add this option to the end of the CFLAGS option list: -I/usr/src/linux-2.6/include
- ./configure && make && sudo make install

TK 8.5
- wget http://prdownloads.sourceforge.net/tcl/tk8.5.9-src.tar.gz
- tar -xvzf tk8.5*
- cd tk8.5
- cd unix
- ./configure && make && sudo make install

Installation

Read up on any notes on any experimental options/tasks you shouldn't be using. Ask in #otheros if you are unsure.

git clone git://git.gitbrew.org/ps3/ps3mfw/ps3mfw.git
cd ps3mfw/
rm -rf tasks
git clone git://git.gitbrew.org/ps3/ps3mfw/tasks.git

You should be able to run the program with ./ps3mfw --gui "false"

@@ Line 257: / Line 257: @@
 ==Fedora==
+Installed with Fedora 9 Full DVD
+Tested on Slim PS3 (3.55) & Phat PS3 (3.15)
-Installed with Fedora 9 Full DVD Tested on Slim PS3 (3.55) & Phat PS3 (3.15)
+When installing Fedora 9, when you are asked about partitioning, choose "Custom layout" and select ps3da.
-When installing Fedora 9, when you are asked about partitioning, choose "Custom layout" and select ps3da.
 ===3.55 (Custom CFW)===
   umount ps3db
   umount ps3dc
@@ Line 271: / Line 271: @@
   cp /tmp/petitboot/mnt/sr0/ppc/ppc64/* /mnt/fedora
   kexec -l vmlinuz --initrd=ramdisk.image.gz
 Reboot the PS3 and it will start the installer
-'''NOTE''': When installing Fedora 9 (possibly all versions), choose "Custom layout" and select ps3da. The hdd_access.sh script disables ps3da-c and makes it so that ps3dd reads as the "first" hard drive. After the installer finishes, '''DO NOT HIT REBOOT'''. You must unplug or hardware reset your console.
+'''NOTE:''' When installing Fedora 9 (possibly all versions), choose "Custom layout" and select ps3da. The hdd_access.sh script disables ps3da-c and makes it so that ps3dd reads as the "first" hard drive.
+After the installer finishes, '''DO NOT HIT REBOOT.''' You must unplug or hardware reset your console.
 ===3.15 PHAT (Stock OFW)===
 *Put petitboot on a memory stick
   mkdir -p /media/usbstick/PS3/otheros/
-  wget http://www.kernel.org/pub/linux/kernel/people/geoff/cell/ps3-petitboot/otheros.bld
+  wget [http://www.kernel.org/pub/linux/kernel/people/geoff/cell/ps3-petitboot/otheros.bld http://www.kernel.org/pub/linux/kernel/people/geoff/cell/ps3-petitboot/otheros.bld]
   cp ./otheros.bld /media/usbstick/PS3/otheros/otheros.bld
 *Boot into GameOS
 **XBM>Settings>System Settings>Other OS>
 **Settings>System Settings>Default System>Other OS>Yes
-*Boot into petitboot and load up a dvd with [http://mirrors.fedoraproject.org/publiclist/Fedora/9/ppc64/ Fedora Core] on it :D
+*Boot into petitboot and load up a dvd with Fedora Core[http://mirrors.fedoraproject.org/publiclist/Fedora/9/ppc64/] on it :D
 '''NAND 3.15 Notes before Tweaks'''
+*Your hdd is ps3da.  Pay attention to the guide and substitude ps3dd with ps3da
-*Your hdd is ps3da. Pay attention to the guide and substitude ps3dd with ps3da
 *Know which partitions are which and don't go mkswap'ing your root partition
 *Do not use hdd_access to configure your hdds
-*You must [http://wiki.gitbrew.org/index.php/PS3:Kernel patch your kernel] with [http://7track.org/~glevand/public/ glevand's patch] / obtain a patched kernel in order to do [http://wiki.gitbrew.org/index.php/PS3:Tools#Enable_RSX_RAM_as_SWAP certain things] and compile certain [http://wiki.gitbrew.org/index.php/PS3:Tools tools].
+*You must [[PS3:Kernel|patch your kernel]] with [http://git.gitbrew.org/~glevand/public/ glevand's patch] / obtain a patched kernel in order to do [[PS3:Tools#Enable_RSX_RAM_as_SWAP|certain things]] and compile certain [[PS3:Tools|tools]].
 ===Tweaks===
 *umount /dev/ps3dd2
 *mkdir /mnt/fedora
@@ Line 309: / Line 307: @@
 **'''NAND 3.15 ONLY:'''change boot from /dev/sdd (or whatever) to ps3da (or whichever drive yours shows up as, not the partition)
 **'''NAND 3.15 ONLY:'''add root=/dev/ps3da1
-**'''NAND 3.15 ONLY:'''Example [http://pastie.org/private/6t37pem4kadjg9s1c4hpgq yboot.conf]
+**'''NAND 3.15 ONLY:'''Example yboot.conf[http://pastie.org/private/6t37pem4kadjg9s1c4hpgq]
 *nano /mnt/Fedora/etc/sudoers
 **append your user under root
@@ Line 315: / Line 313: @@
 ***chmod u+w /mnt/Fedora/etc/sudoers
 ***edit
 ***chmod 0440 /mnt/Fedora/etc/sudoers.
+<pre>
- root     ALL=(ALL) ALL
+root     ALL=(ALL) ALL
- snowy    ALL=(ALL) ALL
+snowy    ALL=(ALL) ALL
+</pre>
-*each time you boot in petitboot, press e on "Fedora" and change ps3da2 to ps3dd2 for both vmlinux and ramdisk. (temporary)
+*each time you boot in petitboot, press e on "Fedora" and change ps3da2 to ps3dd2 for both vmlinuz and ramdisk. (temporary)
 **Unless you followed the NAND 3.15 ONLY step previously.
 *when you boot into fedora for the first time, make the user (same as you did in sudoers) account now.
 *when prompted to login hit alt + ctrl + f1
 *log in
 *sudo su
 *nano /etc/udev/rules.d/10-ps3da1swap.rules
+<pre>
- KERNEL=="ps3da1", ACTION=="add", RUN+="/sbin/mkswap /dev/ps3da1", RUN+="/sbin/swapon -p 1 /dev/ps3da1"
+KERNEL=="ps3da1", ACTION=="add", RUN+="/sbin/mkswap /dev/ps3da1", RUN+="/sbin/swapon -p 1 /dev/ps3da1"
+</pre>
 *nano /etc/udev/rules.d/10-ps3vram.rules
 <pre>
- # udev rules to automatically enable swap on /dev/ps3vram
- # Copy this file to /etc/udev/rules.d/10-ps3vram-swap.rules
- # Choose only one of the rules below
- # Initialize and enable swap unconditionally
+# udev rules to automatically enable swap on /dev/ps3vram
- KERNEL=="ps3vram", ACTION=="add", RUN+="/sbin/mkswap /dev/ps3vram", RUN+="/sbin/swapon -p 10 /dev/ps3vram"
+# Copy this file to /etc/udev/rules.d/10-ps3vram-swap.rules
+# Choose only one of the rules below
+# Initialize and enable swap unconditionally
+KERNEL=="ps3vram", ACTION=="add", RUN+="/sbin/mkswap /dev/ps3vram", RUN+="/sbin/swapon -p 10 /dev/ps3vram"
- # Initialize using /etc/fstab and standard init scripts
+# Initialize using /etc/fstab and standard init scripts
- # KERNEL=="ps3vram", ACTION=="add", RUN+="/bin/bash -c '/bin/grep -q ^/dev/ps3vram[[:space:]]*swap /etc/fstab && /sbin/mkswap /dev/ps3vram'"
+# KERNEL=="ps3vram", ACTION=="add", RUN+="/bin/bash -c '/bin/grep -q ^/dev/ps3vram[[:space:]]*swap /etc/fstab && /sbin/mkswap /dev/ps3vram'"
 </pre>
 Fedora is now installed and configured.

OtherOS++: Difference between revisions

Revision as of 17:14, 22 September 2011

OtherOS++

Firmwares

With SS Patches

No SS Patches

Documentation

Packages

Petitboot Images

Scripts

PS3 Kernels

Git

Master Servers

Gitweb Mirrors

Git Mirrors

partial backup

snaphots

Features

QA Flag

SS Patches

OtherOS++ How-To

PS3 Models

Install OtherOS on HDD (for all PS3 models)

For users who installed OtherOS on VFLASH region 7 previously

Partition the PS3 Drive

PS3:Linux

Example

Fedora

3.55 (Custom CFW)

3.15 PHAT (Stock OFW)

Tweaks

Debian

Ubuntu

Post Installation

Tools

Wireless

Enabling Wireless with the latest Linux kernel

Enabling Sound

Cleaning up Errors

exim4

Kernel

plymouth

Enabling 7th SPU with the latest Linux kernel

Alternate precompiled Debian kernels

FreeBSD OtherOS++

Cross-Compiling

Rebuilding Loader

Rebuilding Kernel

Installation

Booting

Ports

Live CD

Compiling World

Compiling Ports

Configuring System

/boot/loader.conf

/etc/rc.conf

/etc/fstab

Changing Login Shell

Creating ISO Image

Booting Live CD with OtherOS++

Installing FreeBSD on HDD from Live CD

Links

Installation

Booting

Ports

Live CD

Compiling World

Compiling Ports

Configuring System

/boot/loader.conf

/etc/rc.conf

/etc/fstab

Changing Login Shell

Creating ISO Image

Booting Live CD with OtherOS++

Installing FreeBSD on HDD from Live CD

Links

FreeBSD Development

TODO List