GbLAN: Difference between revisions
Jump to navigation
Jump to search
m (Protected "GbLAN" ([edit=autoconfirmed] (indefinite) [move=autoconfirmed] (indefinite))) |
m (-> info moved to seperate GbLAN pages) |
||
Line 10: | Line 10: | ||
! Ports !! Size !! Speed !! Voltage !! Packaging !! Manufacturer !! Serial Number !! Description | ! Ports !! Size !! Speed !! Voltage !! Packaging !! Manufacturer !! Serial Number !! Description | ||
|- | |- | ||
| 8 (3 used) || 20x20mm || Xtal X3501: 25MHz || 3.3V/1.9V/1.2V || 144-pin TQFP || Marvell || 88E6108-LAR1 || Used in earlier models (up to | | 8 (3 used) || 20x20mm || Xtal X3501: 25MHz || 3.3V/1.9V/1.2V || 144-pin TQFP || Marvell || [[88E6108-LAR1]] || Used in earlier models (up to [[CECHGxx]]/[[SEM-00x]]) | ||
|- | |- | ||
| ? || ? || ? || ? || ? || Marvell || 88E6106-LKJ1 || Used in later models ( | | ? || ? || ? || ? || ? || Marvell || [[88E6106-LKJ1]] || Used in later models ([[CECHHxx]]/[[DIA-00x]]) | ||
|- | |- | ||
| - || - || 125MHz || 3.3V, 2.5V or 1.8V || 64-pin QFN || Marvell || Alaska 88E1118R-NNC2 || Used in Slim models (CECH- | | - || - || 125MHz || 3.3V, 2.5V or 1.8V || 64-pin QFN || Marvell || Alaska [[88E1118R-NNC2]] || Used in Slim models ([[CECH-20xx]]/[[DYN-00x]]) | ||
|- | |- | ||
|} | |} | ||
: | : | ||
== Jumbo frames == | == Jumbo frames == | ||
Line 548: | Line 26: | ||
On 3.41 firmware, with a [http://pastie.org/2555526 modified ps3_gelic driver], frames of 1624 bytes can be sent and frames of 1628 bytes can be received. | On 3.41 firmware, with a [http://pastie.org/2555526 modified ps3_gelic driver], frames of 1624 bytes can be sent and frames of 1628 bytes can be received. | ||
{{Models}} | |||
[[Category:GbLAN]] |
Revision as of 04:37, 28 March 2012
Gigabit LAN
The PS3 has 1 Gigabit Ethernet port. The port accepts Auto-MDIX (automatic medium-dependent interface crossover), so no need for special crosscables when hooking up the PS3 direct to the PC.
Gigabit LAN chips used
A sample of the GbLAN chips in different PS3 models:
Ports | Size | Speed | Voltage | Packaging | Manufacturer | Serial Number | Description |
---|---|---|---|---|---|---|---|
8 (3 used) | 20x20mm | Xtal X3501: 25MHz | 3.3V/1.9V/1.2V | 144-pin TQFP | Marvell | 88E6108-LAR1 | Used in earlier models (up to CECHGxx/SEM-00x) |
? | ? | ? | ? | ? | Marvell | 88E6106-LKJ1 | Used in later models (CECHHxx/DIA-00x) |
- | - | 125MHz | 3.3V, 2.5V or 1.8V | 64-pin QFN | Marvell | Alaska 88E1118R-NNC2 | Used in Slim models (CECH-20xx/DYN-00x) |
Jumbo frames
From Linux perspective (under OtherOS <=3.15), the old drivers set the MTU to 2308, while newer versions set the MTU of 1518. This could be a hypervisor restriction (needs research).
MTU is set with vsh using syscall net_ioctl (libnet)
On 3.41 firmware, with a modified ps3_gelic driver, frames of 1624 bytes can be sent and frames of 1628 bytes can be received.