Syscon Thermal Config/structs: Difference between revisions

From PS3 Developer wiki
Jump to navigation Jump to search
m (The name "fancon" is more accurate than "zone", but im keeping both because right now i dont remember where are used the names "Tzones")
(Moved to https://www.psdevwiki.com/ps3/Syscon_Thermal_Configs/structs)
Tag: New redirect
 
(17 intermediate revisions by the same user not shown)
Line 1: Line 1:
This page is '''only''' intended to show some code samples, feel free to improve them, please provide a proof if an important change is made, and use the related {{talk}} page/s for the dicussions and speculations
#REDIRECT [[Syscon Thermal Configs/structs]]
 
{{Boxcode|title=ps3_syscon_eeprom_thermal_config_region.c|code=<syntaxhighlight lang="c">
//      SYSCON    | BOARDS |
//---------------------------
// CXR713F120A    | MPU-501, TMU-520, COOKIE-XX prototypes
// CXR713120-201GB | COK-001
// CXR713120-202GB | COK-002
// CXR713120-203GB | SEM-001
// CXR714120-301GB | DIA-001
// CXR714120-302GB | DIA-002, DEB-001
// CXR714120-303GB | COK-002 (refurb 65nm RSX)
// CXR714120-304GB | COK-001 (refurb 40nm RSX), DIA-001 (refurb 40nm RSX)
// SW-301          | VER-001
// SW-302          | VER-001
// SW2-301        | DYN-001
// SW2-302        | SUR-001
// SW2-303        | JTP-001, JSD-001
// SW3-301        | KTE-001
// SW3-302        | MSX-001, MPX-001, NPX-001
// SW3-303        | ?
// SW3-304        | PQX-001, PPX-001, RTX-001, REX-001
 
struct fan_table_common {
u8 duty_min;
u8 duty_max;
u8 fanconpolicy;  // 0=Full, 1=Auto, 2=Manual
u8 fantbl_select; // FF=RAM, ELSE=ROM
u8 active;        // FF=Active, 0=Inactive
};
 
struct fan_table_sw {
u8  fantbl_duty;
u16 fantbl_tempu;
u16 fantbl_tempd;
};
 
struct fan_table_40 {
u8  fantbl_duty[0xA];
u16 fantbl_tempu[0xA];
u16 fantbl_tempd[0xA];
fan_table_common;
u8  reserved[0x9];
}; // 0x40
 
struct fan_table_80 {
u8  fantbl_duty[0x14];
u16 fantbl_tempu[0x14];
u16 fantbl_tempd[0x14];
fan_table_common;
u8  reserved[0x17];
}; // 0x80
 
struct fan_table_70 {
fan_table_sw[0x14];
fan_table_common;
u8  reserved[0x7];
}; // 0x70
 
 
struct special_section_temps  {
u16 trp;      // Thermal Protection ? (usually 1ºC lower than tshutdown)
u16 tshutdown; // Thermal Shutdown (usually the same temperature than the highest value of TempU)
u16 hyst;      // Hysteresis (usually 2ºC)
};
 
struct special_section_unk_1  {
u8 unk_1_cell; // always 0xFF
u8 unk_1_rsx;  // always 0xFF
u8 unk_1_bevr; // always 0xFF
u8 unk_1_sb;  // always 0xFF
u8 unk_1_eegs; // always 0xFF
};
 
struct special_section_unk_2  {
u8 unk_2_cell; // directly or indirectly related with cell revision
u8 unk_2_rsx;  // directly or indirectly related with rsx revision
u8 unk_2_bevr; // directly or indirectly related with bevr revision
u8 unk_2_sb;  // directly or indirectly related with sb revision
u8 unk_2_eegs; // directly or indirectly related with eegs revision
};
 
struct special_section_unk_3  {
u8 unk_3_cell; // identical to unk_2_cell
u8 unk_3_rsx;  // identical to unk_2_rsx
u8 unk_3_bevr; // always 0xFF, bevr fan table is not active
u8 unk_3_sb;  // identical to unk_2_sb
u8 unk_3_eegs; // always 0xFF, eegs fan table is not active
}; //
 
 
struct special_section_cxrf {
u8  use_eeprom_values; // (00 = yes)
u8  reserved;
special_section_temps cell;
special_section_temps rsx;
special_section_temps xdr;
special_section_temps intake;
special_section_temps gbe;
special_section_temps sb;
u8  reserved[0xA];
u16 tshutdown_time; // TShutdown Time:%d[s](0x%04x)
u8  unknown_0; // related to thermal errors
u8  fan_shutdown_time;
u8  reserved [0xC];
u8  rsx_thermal_limit_unk0;
u8  rsx_thermal_limit_unk1;
u8  rsx_thermal_limit_unk2;
u8  rsx_thermal_limit_unk3;
u8  rsx_thermal_limit_unk4;
u8  rsx_thermal_limit_unk5;
u8  reserved [0xA];
u8  unknown_1; // fan config
u8  unknown_2; // fan config
u8  unknown_3; // fan config
u8  reserved [0xD];
u8  unknown_4; // fan config (set to 0xE0)
u16 unknown_5; // fan config
u16 unknown_6; // fan config
u16 unknown_7; // fan config
u16 unknown_8; // fan config
u16 unknown_9; // fan config
u8  reserved [0x95];
}; // 0x100
 
struct special_section_cxr {
u16 tshutdown_time;        // TShutdown Time:%d[s](0x%04x)
u8  unk_00;                // Fan shutdown time ?
u8  fan_initial_duty;      // Fan initial duty: %d%%(0x%02x)
u8  fan_initial_time;      // Fan initial time: %d(ms)
special_section_unk_1;
special_section_unk_2;
u8  unk_FF;
special_section_temps cell;
special_section_temps rsx;
special_section_temps bevr;
special_section_temps sb;
special_section_temps eegs;
special_section_unk_3;
u8  reserved[0x4B];
u16 checksum;
}; // 0x80
 
struct special_section_sw {
u16 tshutdown_time;        // TShutdown Time:%d[s](0x%04x)
u16 unk_0000;              // Fan shutdown time ?, length increased to 2 bytes for sherwoods ?
u8  fan_initial_duty;      // Fan initial duty: %d%%(0x%02x)
u8  fan_initial_time;      // Fan initial time: %d(ms)
special_section_unk_1;
special_section_unk_2;
special_section_temps cell;
special_section_temps rsx;
special_section_temps sb;
u8  reserved[0x8E];
}; // 0xB0
 
 
struct thermal_config {
#ifdef cytology
fan_table_40 cell;    // table=0, fancon zone=0x00 "1st BE Primary"
fan_table_40 rsx;    // table=1, fancon zone=0x01 "RSX Primary"
fan_table_40 unk_z20; // table=2, fancon zone=0x20 unknown
fan_table_40 unk_z21; // table=3, fancon zone=0x21 unknown
fan_table_40 xdr;    // table=4, fancon zone=0x02 "XDR Primary"
fan_table_40 intake;  // table=7, fancon zone=0x0A "Air Intake"
fan_table_40 gbe;    // table=6, fancon zone=0x0F "GbE"
fan_table_40 sb;      // table=5, fancon zone=0x14 "SB"
special_section_cxrf;
#endif
#ifdef cookie_old
fan_table_40 cell;    // table=0, fancon zone=0x00 "1st BE Primary"
fan_table_40 rsx;    // table=1, fancon zone=0x01 "RSX Primary"
fan_table_40 bevr;    // table=?, fancon zone=0x03 "BE VR"
fan_table_40 sb;      // table=3, fancon zone=0x14 "SB"
fan_table_40 eegs;    // table=?, fancon zone=0x15 "EE+GS"
fan_table_40 reserved
special_section_cxr;
#endif
#ifdef cookie_new
fan_table_80 cell;    // table=0, fancon zone=0x00 "1st BE Primary"
fan_table_80 rsx;    // table=1, fancon zone=0x01 "RSX Primary"
fan_table_80 sb;      // table=?, fancon zone=0x14 "SB"
special_section_cxr;
#endif
#ifdef sherwood
fan_table_70 cell;    // table=0, fancon zone=0x00 "1st BE Primary"
fan_table_70 rsx;    // table=1, fancon zone=0x01 "RSX Primary"
fan_table_70 sb;      // table=?, fancon zone=0x14 "SB"
special_section_sw;
#endif
};
</syntaxhighlight>}}
 
{{Reverse engineering}}<noinclude>[[Category:Main]]</noinclude>

Latest revision as of 15:27, 22 January 2022

Redirect to:

Retrieved from "http://www.psdevwiki.com/ps3/index.php?title=Syscon_Thermal_Config/structs&oldid=64658"