Bluray Drive: Difference between revisions
(Add laser model number of NPX-001,PPX-001 and PQX-001.) |
|||
(54 intermediate revisions by 12 users not shown) | |||
Line 6: | Line 6: | ||
{{media ps3 bd}} {{media ps3 bd install}} {{media ps3 bd video}} | {{media ps3 bd}} {{media ps3 bd install}} {{media ps3 bd video}} | ||
Blu-ray | Blu-ray Disc read maximum is at 2× speed (72 Mbit/s) throughout the entire disc (CLV), [[Regions|region]] coded type allowing the use of: | ||
* PlayStation 3 BD-ROM (DVD region matched; i.e., Zone 1, Zone 2, etc., and All) | * PlayStation 3 BD-ROM (DVD region matched; i.e., Zone 1, Zone 2, etc., and All) | ||
* BD-ROM (BD region matched; i.e., Area A, Area B, etc., and All) | * BD-ROM (BD region matched; i.e., Area A, Area B, etc., and All) | ||
Line 13: | Line 13: | ||
===DVD=== | ===DVD=== | ||
{{media ps2 dvd}} {{media data | {{media ps2 dvd}} {{media data sacd}} | ||
DVD disc read maximum is at 8× speed (86.40 Mbit/s), [[Regions|region]] region coded type allowing the use of: | DVD disc read maximum is at 8× speed (86.40 Mbit/s) at the outermost part of the disc (CAV), [[Regions|region]] region coded type allowing the use of: | ||
* PlayStation 2 DVD-ROM[33] (PlayStation region matched; i.e., NTSC-J, NTSC-U/C, PAL or NTSC-C) | * PlayStation 2 DVD-ROM[33] (PlayStation region matched; i.e., NTSC-J, NTSC-U/C, PAL or NTSC-C) | ||
* DVD-ROM | * DVD-ROM | ||
* DVD-Video (DVD region matched; i.e., | * DVD-Video (DVD region matched; i.e., Region 1, Region 2, etc., and All) | ||
* DVD-Audio (DVD-Video content only) | * DVD-Audio (DVD-Video content only) | ||
* DVD+R | * DVD+R | ||
Line 26: | Line 26: | ||
* AVCHD | * AVCHD | ||
* DSD Disc | * DSD Disc | ||
* DualDisc | * DVD side of DualDisc | ||
* Super Audio CD (compatibility removed in 40 GB, the second 80 GB model (CECHF), and the 160 GB model) | |||
===CD=== | ===CD=== | ||
{{media | {{media ps2 cd}} {{media ps1 cd}} {{media data cd}} | ||
Compact Disc disc read maximum is at 24× speed (29.49 Mbit/s), [[Regions|region]] coded type allowing the use of: | Compact Disc disc read maximum is at 24× speed (29.49 Mbit/s) at the outermost part of the disc (CAV), [[Regions|region]] coded type allowing the use of: | ||
* PlayStation 2 CD-ROM (PlayStation region matched; i.e., NTSC-J, NTSC-U/C, PAL or NTSC-C, compatibility removed in 40 GB model, the second 80 GB model (CECHF), and the 160 GB model) | * PlayStation 2 CD-ROM (PlayStation region matched; i.e., NTSC-J, NTSC-U/C, PAL or NTSC-C, compatibility removed in 40 GB model, the second 80 GB model (CECHF), and the 160 GB model) | ||
* PlayStation CD-ROM (PlayStation region matched; i.e., NTSC-J, NTSC-U or PAL) | * PlayStation CD-ROM (PlayStation region matched; i.e., NTSC-J, NTSC-U or PAL) | ||
Line 41: | Line 42: | ||
* Picture CD? | * Picture CD? | ||
* MP3 CD (MP3, WMA, ATRAC) | * MP3 CD (MP3, WMA, ATRAC) | ||
== Bluray Drive Revisions == | == Bluray Drive Revisions == | ||
This table shows all parts mounted from factory on the different PS3 models, and also the compatible replacement parts that was not mounted from factory because was released later but works. When several replacement parts are compatible you should try to aim for the newest one because it superceedes the others (probably at the time the new part started being produced the production of the older part was stopped) | |||
{| class="wikitable" | {| class="wikitable" | ||
|- | |+ Retail PS3 Models | ||
! [[SKU Models | PS3 Model]] !! <abbr title="MotherBoard">[[Motherboard Revisions|MB]]</abbr> !! [[Bluray Drive|Drive]] !! <abbr title="Mounting Drivesled">Slide</abbr> !! <abbr title="Laser Assembly">Laser</abbr> !! <abbr title="Lenses">Lens</abbr> !! <abbr title="DaughterBoard">DB</abbr> | ! {{cellcolors|#A2A9B1}} <!-- please dont delete this column, is intended to preserve the rowspan alignments of all the other rows --> !! [[SKU Models | PS3 Model]] !! <abbr title="MotherBoard">[[Motherboard Revisions|MB]]</abbr> !! I/O !! [[Bluray Drive|Drive]] !! <abbr title="Mounting Drivesled">Slide</abbr> !! <abbr title="Laser Assembly">Laser</abbr> !! <abbr title="Lenses">Lens</abbr> !! <abbr title="DaughterBoard">DB</abbr> !! Controller !! [[Talk:Bluray_Drive_Firmware#Speculation|EMBOOT]] !! Notes | ||
|- | |- | ||
| [[CECHAxx]] || [[COK-001]] || [[BD-400]] || [[KEM-400AAA]] || [[KES-400A]] || 1 || [[BMD-001]] || | | {{cellcolors|#A2A9B1|#A2A9B1}} 1 || [[CECHAxx]] || rowspan="2" | [[COK-001]] || rowspan="6" | PATA 60p || rowspan="6" | [[BD-400]] || rowspan="6" | [[KEM-400AAA]] || rowspan="6" | [[KES-400A]] || rowspan="6" | 1 || rowspan="5" | [[BMD-001]] || rowspan="5" | [[CXD5063AGG-1]] || rowspan="5" | 302R....? || rowspan="5" | | ||
|- | |- | ||
| | | {{cellcolors|#A2A9B1|#A2A9B1}} 2 || [[CECHBxx]] | ||
|- | |- | ||
| | | {{cellcolors|#A2A9B1|#A2A9B1}} 3 || [[CECHCxx]] || rowspan="2" | [[COK-002]] | ||
|- | |- | ||
| | | {{cellcolors|#A2A9B1|#A2A9B1}} 4 || [[CECHExx]] | ||
|- | |- | ||
| | | {{cellcolors|#A2A9B1|#A2A9B1}} 5 || rowspan="2" | [[CECHGxx]] || rowspan="2" | [[SEM-001]] | ||
|- | |- | ||
| | | {{cellcolors|#A2A9B1|#A2A9B1}} 6 || [[BMD-002]] || [[CXD5065GB-1]] || 302R....? || | ||
|- | |- | ||
| [[ | | {{cellcolors|#A2A9B1|#A2A9B1}} 7 || [[CECHHxx]] || [[DIA-001]] || rowspan="4" | PATA 60p || rowspan="6" | [[BD-410]] || rowspan="6" | [[KEM-410ACA]] || rowspan="6" | [[KES-410A]] || rowspan="6" | 2 || [[BMD-003]] || [[CXD5065GB-1]] || 302R....? || | ||
|- | |- | ||
| | | {{cellcolors|#A2A9B1|#A2A9B1}} 8 || [[CECHJxx]] || rowspan="3" | [[DIA-002]] || rowspan="2" | [[BMD-006]] || rowspan="2" | [[CXD5065GB-1]] || rowspan="2" | 302R....? || rowspan="2" | | ||
|- | |- | ||
| | | {{cellcolors|#A2A9B1|#A2A9B1}} 9 || rowspan="2" | [[CECHKxx]] | ||
|- | |- | ||
| | | {{cellcolors|#A2A9B1|#A2A9B1}} 10 || [[BMD-011]] || [[R8J32800FPV]] || 304R....? || | ||
|- | |- | ||
| [[ | | {{cellcolors|#A2A9B1|#A2A9B1}} 11 || rowspan="2" | [[CECHLxx]]<br>[[CECHMxx]]<br>[[CECHPxx]]<br>[[CECHQxx]] || rowspan="2" | [[VER-001]] || rowspan="2" | SATA 24p || [[BMD-021]] || [[CXD5065GB-1]] || 302R....? || | ||
|- | |- | ||
| | | {{cellcolors|#A2A9B1|#A2A9B1}} 12 || [[BMD-031]] || [[R8J32810FPV1]] || 304R....? || | ||
|-{{cellcolors|#A2A9B1}} | |||
| colspan="12" | | |||
|- | |- | ||
| [[ | | {{cellcolors|#A2A9B1|#A2A9B1}} 13 || rowspan="2" | [[CECH-20xx]] || rowspan="2" | [[DYN-001]] || rowspan="3" | SATA 24p || rowspan="3" | [[BD-450]] || rowspan="3" | [[KEM-450AAA]] || rowspan="3" | [[KES-450A]] or<br />[[KES-460A]] || rowspan="6" | 2 || [[BMD-051]] || [[R8J32820FPV1]] || 308R....? || | ||
| [[ | |||
| [[ | |||
|- | |- | ||
| | | {{cellcolors|#A2A9B1|#A2A9B1}} 14 || [[BMD-061]] || [[CXD5130R-1]] || 306R0008 || | ||
|- | |- | ||
| | | {{cellcolors|#A2A9B1|#A2A9B1}} 15 || [[CECH-21xx]] || [[SUR-001]] || [[BMD-065]] || [[CXD5131R-1]] || 306R0010 || | ||
|- | |- | ||
| [[CECH- | | {{cellcolors|#A2A9B1|#A2A9B1}} 16 || rowspan="2" | [[CECH-25xx]] || [[JTP-00x]] || rowspan="3" | SATA || rowspan="2" | [[BD-460]] || rowspan="2" | [[KEM-450DAA]] || rowspan="2" | [[KES-450D]] or<br />[[KES-460A]] || rowspan="3" {{integrated}} || [[R8J32830FPV1]] || 308R....? || | ||
| [[ | |||
|- | |- | ||
| | | {{cellcolors|#A2A9B1|#A2A9B1}} 17 || [[JSD-00x]] || [[CXD5131R-1]] || 306R0011 || | ||
|- | |- | ||
| [[CECH- | | {{cellcolors|#A2A9B1|#A2A9B1}} 18 || [[CECH-30xx]] || [[KTE-001]] || [[BD-470]] || [[KEM-450EAA]] || [[KES-450E]] or<br />[[KES-470A]] || [[CXD5132R-1]] || 310R0003 || | ||
|-{{cellcolors| | |-{{cellcolors|#A2A9B1}} | ||
| | | colspan="12" | | ||
|- | |- | ||
| | | {{cellcolors|#A2A9B1|#A2A9B1}} 19 || rowspan="2" | [[CECH-40xx]] || [[MSX-001]] || rowspan="7" | SATA || rowspan="7" {{integrated}} || rowspan="2" | [[KEM-850]] || rowspan="2" | [[KES-850A]] || rowspan="5" | 2 || rowspan="7" {{integrated}} || [[CXD5132R-1]] || 314R0001 || | ||
| [[ | |||
| | |||
| [[ | |||
|- | |- | ||
| | | {{cellcolors|#A2A9B1|#A2A9B1}} 20 || [[MPX-001]] || [[R8J32840FP1]] || 312R....? || | ||
|- | |- | ||
| [[CECH- | | {{cellcolors|#A2A9B1|#A2A9B1}} 21 || rowspan="3" | [[CECH-42xx]] || [[NPX-001]] ||[[KEM-850]]||[[KES-850A]]|| [[R8J32840FP1]] || 312R....? || | ||
|- | |- | ||
| | | {{cellcolors|#A2A9B1|#A2A9B1}} 22 || [[PPX-001]] ||[[KEM-451AAA]]||[[KES-451A]]|| ? || ........? || | ||
|- | |- | ||
| | | {{cellcolors|#A2A9B1|#A2A9B1}} 23 || [[PQX-001]] ||[[KEM-850]]||[[KES-850A]]|| ? || ........? || | ||
|- | |- | ||
| [[CECH- | | {{cellcolors|#A2A9B1|#A2A9B1}} 24 || rowspan="2" | [[CECH-43xx]] || [[RTX-001]] || [[KEM-451AAA]] || [[KES-451A]] || 1 || [[R8J32840FP1]] || 316R....? || | ||
|- | |- | ||
| [[ | | {{cellcolors|#A2A9B1|#A2A9B1}} 25 || [[REX-00x|REX-001]] || [[KEM-495AAA]] || [[KES-495A]] || 1 || [[R9J04G011FP1]] || 318R....? || | ||
|} | |||
<!-- Around year 2014, when we assigned the superslim motherboards to the different PS3 models we had to do some assumptions because was recently launched, the info about them was very scarce and the superslim owners was not giving any help at all, now 7 years later we are pretty much at the same point, i dont really know for sure who is the "owner" of each superslim motherboard, personally i trust most the info from the "platform id" but is incomplete for superslims too. Anyway im going to reorganize the table a bit following the assignment of motherboard to PS3 model from the "motherboard revisions" page, wip --> | |||
{| class="wikitable" | |||
|+ Non Retail PS3 Models | |||
! [[SKU Models | PS3 Model]] !! <abbr title="MotherBoard">[[Motherboard Revisions|MB]]</abbr> !! [[Bluray Drive|Drive]] !! <abbr title="Mounting Drivesled">Slide</abbr> !! <abbr title="Laser Assembly">Laser</abbr> !! <abbr title="Lenses">Lens</abbr> !! <abbr title="DaughterBoard">DB</abbr> !! I/O !! Controller !! [[Talk:Bluray_Drive_Firmware#Speculation|EMBOOT]] !! Notes | |||
|- | |- | ||
| [[ | | [[DECR-1000]] || [[TMU-520]] || [[BD-400]] || [[KEM-400AAA]] || [[KES-400A]] || 1 || [[BMD-001]] || PATA 60p || [[CXD5063GG-3]] || || | ||
| [[ | |||
|- | |- | ||
| [[ | | [[DECR-1400]] || [[DEB-001]] || [[BD-410]] || || || || || || || || | ||
|} | |} | ||
Line 147: | Line 127: | ||
=== CECHE === | === CECHE === | ||
Some have a KES-410ACA dual lens laser. | Some have a KES-410ACA dual lens laser with [[BMD-003]] daughterboard. | ||
=== CECHG === | === CECHG === | ||
Line 174: | Line 154: | ||
*[[KES-450E]] | *[[KES-450E]] | ||
*[[KEM-480AAA]] unknown PS3 model | *[[KEM-480AAA]] unknown PS3 model | ||
*[[KEM-495AAA]] [[CECH-43xx|CECH-4301C]] | |||
== Remarry BluRay drive == | == Remarry BluRay drive == | ||
Line 346: | Line 327: | ||
===Controllers (Digital Signal Processors)=== | ===Controllers (Digital Signal Processors)=== | ||
*Also known as MC or MechaCon. | |||
==== | |||
====CXD5063GG-1==== | |||
IC300 <br /> | IC300 <br /> | ||
Used in BMD-001, BMD-002 | Used in [[BMD-001]], [[BMD-002]] | ||
====CXD5063AGG-1==== | ====CXD5063AGG-1==== | ||
IC300 <br /> | IC300 <br /> | ||
Line 402: | Line 384: | ||
Used in [[BMD-001]], [[BMD-002]], [[BMD-003]], [[BMD-006]], [[BMD-021]] | Used in [[BMD-001]], [[BMD-002]], [[BMD-003]], [[BMD-006]], [[BMD-021]] | ||
=== | ===Drivers=== | ||
====Rohm BA5888FP (Laser Driver - Tracking/Focus Coils driver)==== | ====Rohm BA5888FP (Laser Driver - Tracking/Focus Coils driver)==== | ||
Simular Datasheet: [http://www.trisaster.de/file/sony/ps3/hardware/laufwerk/BA5954FP.pdf BA5954FP.pdf] <br /> | Simular Datasheet: [http://www.trisaster.de/file/sony/ps3/hardware/laufwerk/BA5954FP.pdf BA5954FP.pdf] <br /> | ||
Line 426: | Line 408: | ||
====Rohm BD7761EFV (motor driver)==== | ====Rohm BD7761EFV (motor driver)==== | ||
Integrated on PS3 motherboard: [[MSX- | Integrated on PS3 motherboard: [[MSX-001]], [[MPX-001]], [[PQX-001]]. See: [[BD7761EFV]] | ||
<!--// not verifyed if present in [[ | <!--// not verifyed if present in [[NPX-00x]] PS3 motherboards //--> | ||
====Rohm BD7763EFV (motor driver)==== | |||
Integrated on PS3 motherboard: [[PPX-00x]] and [[REX-001]] (probably used also in [[RTX-001]]). See: [[BD7763EFV]] | |||
====NJM13403V (OPAMP - Tracking/Focus CTRL)==== | ====NJM13403V (OPAMP - Tracking/Focus CTRL)==== | ||
Line 482: | Line 467: | ||
IC309 <br /> | IC309 <br /> | ||
Worker RAM for BD <br /> | Worker RAM for BD <br /> | ||
Used in [[BMD-006]] <br /> | Used in [[BMD-003]], [[BMD-006]] <br /> | ||
[[:File:ESMT-M12L64164A-7TG-TSOPII54.png]] | [[:File:ESMT-M12L64164A-7TG-TSOPII54.png]] | ||
Line 1,120: | Line 1,105: | ||
|} | |} | ||
{{Components}}<noinclude>[[Category:Main]]</noinclude> | {{Components}}<noinclude> | ||
[[Category:Main]] | |||
</noinclude> |
Revision as of 05:27, 4 August 2024
BD Drive
Interface speed is max. 11MB/s based on the supported read speeds
Supported Disc Formats
BD
Blu-ray Disc read maximum is at 2× speed (72 Mbit/s) throughout the entire disc (CLV), region coded type allowing the use of:
- PlayStation 3 BD-ROM (DVD region matched; i.e., Zone 1, Zone 2, etc., and All)
- BD-ROM (BD region matched; i.e., Area A, Area B, etc., and All)
- BD-R
- BD-RE (not compatible with BD-RE version 1.0)
DVD
DVD disc read maximum is at 8× speed (86.40 Mbit/s) at the outermost part of the disc (CAV), region region coded type allowing the use of:
- PlayStation 2 DVD-ROM[33] (PlayStation region matched; i.e., NTSC-J, NTSC-U/C, PAL or NTSC-C)
- DVD-ROM
- DVD-Video (DVD region matched; i.e., Region 1, Region 2, etc., and All)
- DVD-Audio (DVD-Video content only)
- DVD+R
- DVD+RW
- DVD-R
- DVD-RW
- AVCHD
- DSD Disc
- DVD side of DualDisc
- Super Audio CD (compatibility removed in 40 GB, the second 80 GB model (CECHF), and the 160 GB model)
CD
Compact Disc disc read maximum is at 24× speed (29.49 Mbit/s) at the outermost part of the disc (CAV), region coded type allowing the use of:
- PlayStation 2 CD-ROM (PlayStation region matched; i.e., NTSC-J, NTSC-U/C, PAL or NTSC-C, compatibility removed in 40 GB model, the second 80 GB model (CECHF), and the 160 GB model)
- PlayStation CD-ROM (PlayStation region matched; i.e., NTSC-J, NTSC-U or PAL)
- CD-ROM
- CD-R
- CD-RW
- CD-DA
- Photo CD?
- Picture CD?
- MP3 CD (MP3, WMA, ATRAC)
Bluray Drive Revisions
This table shows all parts mounted from factory on the different PS3 models, and also the compatible replacement parts that was not mounted from factory because was released later but works. When several replacement parts are compatible you should try to aim for the newest one because it superceedes the others (probably at the time the new part started being produced the production of the older part was stopped)
PS3 Model | MB | Drive | Slide | Laser | Lens | DB | I/O | Controller | EMBOOT | Notes |
---|---|---|---|---|---|---|---|---|---|---|
DECR-1000 | TMU-520 | BD-400 | KEM-400AAA | KES-400A | 1 | BMD-001 | PATA 60p | CXD5063GG-3 | ||
DECR-1400 | DEB-001 | BD-410 |
- Notes
- In lasers models with 2 lenses, one is for CD/DVD, another for Blu-ray
- Need proper sources, drive info and which PS3 SKU's are having X drive. Please fill in the needed info if possible.
- The BD controllers starting with CXD are manufactured by sony and the others with R are manufactured by renesas. Starting from CECHKxx every motherboard has 2 revisions of the BD drive, the first uses a sony BD controller and the second a renesas BD controller. This means for some reason (like reducing costs?) sony passes the BD controller production to renesas when they are happy with the new BD controllers
Table explained in short
CECHA, CECHB, CECHC, (some CECHE, CECHG)
Initial FAT models: With BD-400 drive, BMD-001 daughterboard capable for driving KEM-400AAA slide and KES-400A laser.
CECHE
Some have a KES-410ACA dual lens laser with BMD-003 daughterboard.
CECHG
First seen on CECHGxx: Still BD-400 drive, but now with BMD-002 or BMD-003 daughterboard
CECHH, CECHI, CECHJ, CECHK, CECHL, CECHM, CECHN, CECHO, CECHP, CECHQ
Since CECHHxx and later: Changed to BD-410 drive, with BMD-003/BMD-006/BMD-011/BMD-021/BMD-031 daughterboard and KES-410A dual lens laser
CECH2000
CECH-20xx slims introduced BD-450 with BMD-051 daughterboard, capable of driving KES-450A laser and KEM-450AAA slide
CECH2100
CECH-21xx slims also uses BD-450 with BMD-051 daughterboard, capable of driving KES-450A laser and KEM-450AAA slide (but sometimes seen with KES-460A laser)
CECH2500, CECH3000 without daughterboard
CECH-25xx (and later CECH-30xx) series moved the components from the daughterboard to the main PS3 motherboard. Thus there are more/different flatcables used to connect the drive. They are electrical inter-changable (2500<>3000), but mounting differs slightly. It can be modified to fit by cutting some plastic pins on the bottom front of the drive (to make it fit properly with the start/eject board).
KES-460A Laser will work with all slims before the CECH-30xx series.
KES-470A Laser is not backwards compatible and only with CECH-30xx series
CECH4000 toploader
CECH-40xx introduced the toploader (like ps2 slim and old ps1 had) with KEM-850 PHA 0672 assembly.
unreferenced
- KES-450E
- KEM-480AAA unknown PS3 model
- KEM-495AAA CECH-4301C
Remarry BluRay drive
BluRay drive daughterboard is paired with PS3 motherboard, so exchanging a BluRay drive requires remarriage of the BluRay daughterboard. See: Remarry Bluray Drive
BluRay region switcher
This makes changing the BluRay region switching possible. The method described below is using 3 region specific bytes (0x84, 0x85, 0x8C) to change the modelinfo.
Other modelinfo byte values: 0x81 Reference Tool, 0x82 Debug, 0x83 Japan (00), 0x84 North America (01), 0x85 Europe, Middle East, Africa (04), 0x86 South Korea (05), 0x87 United Kingom, Ireland (03), 0x88 Mexico (11), 0x89 Australia, New Zealand (02), 0x8A Singapore, Malaysia (06), 0x8B Taiwan (07), 0x8C Russia, India (08), 0x8D China (09), 0x8E Hong Kong (12)
Payloader method prerequisites:
- LV2 Patcher v9
- patchfiles (see below)
patch4.txt content (3.55 offsets):
# BD Region A (NTSC) [North America]
# Patches marked with (*1) seem to be unstable. Thanks to drizztbsd and
# RandomUse.
# PL3:
ef48: payload.bin # this is not neccesary,
# just the first QWORD of the payload
# Change region to US... Thanks ps3mrenigma
# Syscall preamble
F380: F821FF51 # stdu %sp, -0xB0(%sp)
F384: 7C0802A6 # mflr %r0
F388: FBC100A0 # std %r30, 0xA0(%sp)
F38C: FBE100A8 # std %r31, 0xA8(%sp)
F390: FBA10098 # std %r29, 0×98(%sp)
F394: F80100C0 # std %r0, 0xC0(%sp)
# capture 0x19004 if not jump to original syscall
F398: 3FE00001 # lis %r31, 1
F39C: 63FF9004 # ori %r31, %r31, 0×9004
F3A0: 7C1F1800 # cmpw %r31, %r3
F3A4: 4082003C # bne _orig_syscall
# Force US - Retail
F3A8: 3BC00084 # li %r30, 0×84
F3AC: 3BA00001 # li %r29, 1
F3B0: 9BA40001 # stb %r29, 1(%r4)
F3B4: 9BC40003 # stb %r30, 3(%r4)
F3B8: 9BA40005 # stb %r29, 5(%r4)
F3BC: 9BA40007 # stb %r29, 7(%r4)
F3C0: 38600000 # li %r3, 0
# Restore STACK
F3C4: E80100C0 # ld %r0, 0xC0(%sp)
F3C8: EBA10098 # ld %r29, 0×98(%sp)
F3CC: EBE100A8 # ld %r31, 0xA8(%sp)
F3D0: EBC100A0 # ld %r30, 0xA0(%sp)
F3D4: 7C0803A6 # mtlr %r0
F3D8: 382100B0 # addi %sp, %sp, 0xB0
F3DC: 4E800020 # blr
F3E0: 4823ED28 # b syscall0x363
31EB1C: 0000F380 #syscall 0x363 descriptor
patch5.txt content(3.55 offsets):
# BD Region B (PAL) [Europe, Middle East, Africa]
# Patches marked with (*1) seem to be unstable. Thanks to drizztbsd and
# RandomUse.
# PL3:
ef48: payload.bin # this is not neccesary,
# just the first QWORD of the payload
# Change region to Europe... Thanks ps3mrenigma
# Syscall preamble
F380: F821FF51 # stdu %sp, -0xB0(%sp)
F384: 7C0802A6 # mflr %r0
F388: FBC100A0 # std %r30, 0xA0(%sp)
F38C: FBE100A8 # std %r31, 0xA8(%sp)
F390: FBA10098 # std %r29, 0×98(%sp)
F394: F80100C0 # std %r0, 0xC0(%sp)
# capture 0x19004 if not jump to original syscall
F398: 3FE00001 # lis %r31, 1
F39C: 63FF9004 # ori %r31, %r31, 0×9004
F3A0: 7C1F1800 # cmpw %r31, %r3
F3A4: 4082003C # bne _orig_syscall
# Force Europe - Retail
F3A8: 3BC00085 # li %r30, 0×85
F3AC: 3BA00001 # li %r29, 1
F3B0: 9BA40001 # stb %r29, 1(%r4)
F3B4: 9BC40003 # stb %r30, 3(%r4)
F3B8: 9BA40005 # stb %r29, 5(%r4)
F3BC: 9BA40007 # stb %r29, 7(%r4)
F3C0: 38600000 # li %r3, 0
# Restore STACK
F3C4: E80100C0 # ld %r0, 0xC0(%sp)
F3C8: EBA10098 # ld %r29, 0×98(%sp)
F3CC: EBE100A8 # ld %r31, 0xA8(%sp)
F3D0: EBC100A0 # ld %r30, 0xA0(%sp)
F3D4: 7C0803A6 # mtlr %r0
F3D8: 382100B0 # addi %sp, %sp, 0xB0
F3DC: 4E800020 # blr
F3E0: 4823ED28 # b syscall0x363
31EB1C: 0000F380 #syscall 0x363 descriptor
patch6.txt content(3.55 offsets):
# BD Region C (RUSSIA/INDIA)
# Patches marked with (*1) seem to be unstable. Thanks to drizztbsd and
# RandomUse.
# PL3:
ef48: payload.bin # this is not neccesary,
# just the first QWORD of the payload
# Change region to US... Thanks ps3mrenigma
# Syscall preamble
F380: F821FF51 # stdu %sp, -0xB0(%sp)
F384: 7C0802A6 # mflr %r0
F388: FBC100A0 # std %r30, 0xA0(%sp)
F38C: FBE100A8 # std %r31, 0xA8(%sp)
F390: FBA10098 # std %r29, 0×98(%sp)
F394: F80100C0 # std %r0, 0xC0(%sp)
# capture 0x19004 if not jump to original syscall
F398: 3FE00001 # lis %r31, 1
F39C: 63FF9004 # ori %r31, %r31, 0×9004
F3A0: 7C1F1800 # cmpw %r31, %r3
F3A4: 4082003C # bne _orig_syscall
# Force Russia - Retail
F3A8: 3BC0008C # li %r30, 0×8C
F3AC: 3BA00001 # li %r29, 1
F3B0: 9BA40001 # stb %r29, 1(%r4)
F3B4: 9BC40003 # stb %r30, 3(%r4)
F3B8: 9BA40005 # stb %r29, 5(%r4)
F3BC: 9BA40007 # stb %r29, 7(%r4)
F3C0: 38600000 # li %r3, 0
# Restore STACK
F3C4: E80100C0 # ld %r0, 0xC0(%sp)
F3C8: EBA10098 # ld %r29, 0×98(%sp)
F3CC: EBE100A8 # ld %r31, 0xA8(%sp)
F3D0: EBC100A0 # ld %r30, 0xA0(%sp)
F3D4: 7C0803A6 # mtlr %r0
F3D8: 382100B0 # addi %sp, %sp, 0xB0
F3DC: 4E800020 # blr
F3E0: 4823ED28 # b syscall0x363
31EB1C: 0000F380 #syscall 0x363 descriptor
Copy the patch files to /dev_hdd0/game/LV2000000/USRDIR and use LV2 Patcher to select the patch to use. Reboot to return to original state.
Reference: ps3mrenigma blog export
BD Drive IC Components
The drive controller contains a BGA-sized 2MB NOR flash memory chip for Blu-ray drive firmware code, with the contents encrypted. In addition to this, there is a 8MB SDRAM working memory chip. Each drive contains a unique identification number, possibly stored in the SPI Serial Interface Macronix EEPROM. This chip or the NOR flash chip probably stores the device key (and associated sequence keys), and the host private key. The Blu-ray drive is controlled by a Sony Digital Signal Processor chip (CXD6350GG-1, CXD5063AGG-1, CXD5065GB-1, CXD5065-1 depending the SKU) and a Sony CXA2720R Front End Processor chip. Motors/coils are driven by Rohm BA5888FP (Laser Driver - Tracking/Focus Coils driver) and Rohm BD7956FS (Motor Driver - EXP-Motor coils/sled/slot motor driver), of which the Laser Driver uses an OPAMP NJM13403V for Tracking/Focus CTRL.
Type | Size | Speed | Voltage | Packaging | Manufacturer | Serial Number | Description |
---|---|---|---|---|---|---|---|
NOR Flash | 2MB | 3V | Spansion | S99-50111-001 | PS3 Blu-ray firmware chip | ||
NOR Flash | 1MB | 3V | BGA-48/BGA-64 | Spansion | S29AL008D / AL008D0043-01 | PS3 Blu-ray firmware chip (CECHJ and later models) | |
SDRAM | 8MB (64M-bit 4Mx16) | 133MHz | 3.3V | TSOPII-54 | Samsung | K4S641632K-UC75 | PS3 Blu-ray working memory chip |
SDRAM | 8MB (64M-bit 4Mx16) | 143MHz | 3.3V | TSOPII-54 | ESMT | M12L64164A-7TG | PS3 Blu-ray working memory chip (CECHJ and later models) |
EEPROM | 128KB | 85MHz | Macronix | MX25L1005MC-12G | PS3 Blu-ray flash chip |
In regard to Renesas SCEI R8J328xxFPV see also: http://weaponre.com/blog.html
Controllers (Digital Signal Processors)
- Also known as MC or MechaCon.
CXD5063GG-1
IC300
Used in BMD-001, BMD-002
CXD5063AGG-1
IC300
Used in BMD-001, BMD-002
CXD5065GB-1
IC300
Used in BMD-001, BMD-002, BMD-003, BMD-006, BMD-021
File:CXD5065GB-1-GRID-bw-pcbview.png
Other Reference: http://stefde69.blogspot.com/2010/04/blue-ray-board-made-accessible.html
CXD5130R-1
Used in BMD-061
CXD5131R-1
- Used as controller/bridge for the Bluray Drive:
See: CXD5131R-1
CXD5132R-1
Integrated on PS3 motherboards: KTE-00x (in CECH-30xx PS3 models), and MSX-00x (in CECH-40xx PS3 models)
See: CXD5132R-1
Renesas SCEI R8J32800FPV
Used in BMD-011
Renesas SCEI R8J32810FPV1
Used in BMD-031
Renesas SCEI R8J32820FPV1
Used in BMD-051
running @ 33.969MHz
Renesas SCEI R8J32830FPV1
Integrated on PS3 motherboard: JTP-00x (in CECH-25xx PS3 models)
Subcontrollers (Front-End-Processors)
CXA2720R
IC110
Used in BMD-001, BMD-002, BMD-003, BMD-006, BMD-021
Drivers
Rohm BA5888FP (Laser Driver - Tracking/Focus Coils driver)
Simular Datasheet: BA5954FP.pdf
IC108
Used in BMD-001, BMD-002, BMD-003, BMD-006, BMD-011, BMD-021
Rohm BD7956FS (7 channel Motor Driver - EXP-Motor coils/sled/slot motor driver)
Datasheet: bd7956fs.pdf
IC103
Used in BMD-001, BMD-002, BMD-003, BMD-006, BMD-011, BMD-021
Rohm BD7969EFV (9 channel Motor/Coil Driver - EXP-Motor coils/sled/slot/focus motor driver)
Datasheet: bd7959efv-e.pdf
bd7959efv
Used in BMD-061
Integrated on motherboard in CECH-25xx with motherboard JTP-001
Rohm BD7979EFV
Integrated on motherboard in CECH-25xx with motherboard JSD-001, and CECH-30xx with motherboard KTE-001
See BD7979EFV
Rohm BD7761EFV (motor driver)
Integrated on PS3 motherboard: MSX-001, MPX-001, PQX-001. See: BD7761EFV
Rohm BD7763EFV (motor driver)
Integrated on PS3 motherboard: PPX-00x and REX-001 (probably used also in RTX-001). See: BD7763EFV
NJM13403V (OPAMP - Tracking/Focus CTRL)
Datasheet: NJM13403V.pdf (153.98 KB)
IC303
Used in BMD-001, BMD-002, BMD-003, BMD-006, BMD-021
File:NJM13403V-SSOP14.png
Memory
NOR Flash
Spansion S99-50111-001
IC304
Contains encrypted firmware
Used in BMD-001
Manufacturer ID: 0x01
Device ID: 0x49
Capacity: 16Mbit
Spansion AL008D0043-01
IC304
Contains encrypted firmware
Used in BMD-002, BMD-003, BMD-004, BMD-006, BMD-021
Manufacturer ID: 0x01
Device ID: 0x5B (bottom boot block)
Capacity: 8Mbit
Other Reference:
- http://stefde69.blogspot.com/2010/05/first-look-to-numerical-sections.html
- http://twitpic.com/25fcke/full
Spansion S29AL008D
Datasheet: S29AL008D_00_A11_e.pdf
IC304
Contains encrypted firmware
File:S29AL008D-BGA-48.png
Used in BMD-006
RAM
Samsung K4S641632K-UC75
Datasheet: K4S641632K.pdf (327.77 KB)
IC309
Worker RAM for BD
Used in BMD-001, BMD-002, BMD-003, BMD-006, BMD-021
File:Samsung_K4S641632K-UC75-TSOPII-54.png
ESMT M12L64164A-7TG
Datasheet: M12L64164A.pdf
IC309
Worker RAM for BD
Used in BMD-003, BMD-006
File:ESMT-M12L64164A-7TG-TSOPII54.png
EEPROM
Macronix MX25L1005MC
Datasheet: Serial1.pdf
IC310
Key
Used in BMD-001, BMD-002, BMD-003, BMD-006
File:Macronix-MX25L1005MC-SOP8.png
Serial
Macronix MX25L1635DM2I-12G
16M-BIT x1/x2/x4 CMOS Serial Flash
Datasheet: [1]
Used in BMD-061
Others
CXD5064R
IC504
Used in BMD-001
Marvell 88SA8040-TBC1
SATA to PATA IDE bridge chip. See: 88SA8040-TBC1
BD Drive Connectors
CN301 - Bluraydrive Main I/O Connector
60 pins
To mainboard, Data
Used in BMD-001, BMD-002, BMD-003, BMD-006, BMD-011
Pin | Usage | Remarks |
---|---|---|
1 | EVER3.3V | |
2 | GND | Ground |
3 | 12_SW | 12CM Disk Switch |
4 | 8_SW | 8CM Disk Switch |
5 | HOST_EJECT | |
6 | HOST_DISCIN | |
7 | DISC_CHUCK | |
8 | PHOTO_LED | |
9 | DISCIN_SW | |
10 | GND | Ground |
11 | SCK | |
12 | SCS | |
13 | SIN | |
14 | SOUT | |
15 | XSIOINT | |
16 | RESERVED | TXD |
17 | RESERVED | RD |
18 | XSB_CBLID | |
19 | GND | Ground |
20 | DAT | |
21 | LRCK | |
22 | BCK | |
23 | GND | Ground |
24 | HINT | |
25 | HA1 | |
26 | XPDIAG | |
27 | HA0 | |
28 | HA2 | |
29 | XHCS0 | |
30 | XHCS1 | |
31 | XDASP | |
32 | GND | Ground |
33 | DREQ | |
34 | GND | Ground |
35 | XIOW | |
36 | GND | Ground |
37 | XIOR | |
38 | GND | Ground |
39 | XIOCHRDY | |
40 | CSEL | |
41 | XDACK | |
42 | GND | Ground |
43 | HDB7 | |
44 | HDB8 | |
45 | HDB6 | |
46 | HDB9 | |
47 | HDB5 | |
48 | HDB10 | |
49 | HDB4 | |
50 | HDB11 | |
51 | HDB3 | |
52 | HDB12 | |
53 | HDB2 | |
54 | HDB13 | |
55 | HDB1 | |
56 | HDB14 | |
57 | HDB0 | |
58 | HDB15 | |
59 | GND | Ground |
60 | XRESET |
CN100 14pin
Pin | Usage | Remarks |
---|---|---|
1 | 5V | +5V DC |
2 | SCKSNS3 | S clock Sense |
3 | Slide Cam SW | |
4 | 12cm SW | to S100: 12cm Detection Switch |
5 | 8cm SW | to S101: 8cm Detection Switch |
6 | DISC CHUCK | to S102: Chucking Switch |
7 | DISC IN SW | |
8 | EVER 3.3V | +3.3V DC |
9 | GND | Ground |
10 | NC | No connection |
11 | LOAD+ | to 12 |
12 | LOAD+ | to CN101-2pin:2 |
13 | LOAD- | to 14 |
14 | LOAD- | to CN101-2pin:1 |
CN101 2pin
Pin | Usage | Remarks |
---|---|---|
1 | LOAD- | to CN100-14pin:13+14 |
2 | LOAD+ | to CN100-14pin:11+12 |
CN104 2pin
To IR-LED for detect disc insertion
Used in BMD-001, BMD-002
Pin | Usage | Remarks |
---|---|---|
1 | ||
2 |
CN200 2pin
Pin | Usage | Remarks |
---|---|---|
1 | PHOTO LED | to JL200 |
2 | GND | Ground ; to JL201 |
CN103 45pin
To laser, Data and Focus/Tracking
Used in BMD-001, BMD-002, BMD-003, BMD-006
Pin | Usage | Remarks |
---|---|---|
1 | IOP_MON | |
2 | TEST_V | |
3 | EMST | |
4 | LDEN | |
5 | XRST | |
6 | SDIO | |
7 | SEN_LDD | |
8 | SCLK | |
9 | THERMO | |
10 | 8.0V | 8.0V DC |
11 | 5.0V | 5V DC |
12 | GND_LD | Ground |
13 | GND_LD | Ground |
14 | 3.3V | 3.3V DC |
15 | GND | Ground |
16 | GND | Ground |
17 | XOUT | |
18 | H | |
19 | G | |
20 | F | |
21 | E | |
22 | VC_PD | |
23 | D | |
24 | C | |
25 | B | |
26 | A | |
27 | 5V_PD | VCC 5V DC |
28 | GND_PD | Ground |
29 | DVD_AF- | |
30 | DVD_AF+ | |
31 | GND_PD | Ground |
32 | BD_AF- | |
33 | BD_AF+ | |
34 | GND_PD | Ground |
35 | VPP_LCD | |
36 | SEN_LCD | |
37 | EXP_B- | |
38 | EXP_B+ | |
39 | EXP_A- | |
40 | EXP_A+ | |
41 | EXP_INIT | |
42 | TRK_in | |
43 | FCS_far | |
44 | FCS_near | |
45 | TRK_out |
CN102 8pin
To spindle motor
Used in BMD-001, BMD-002
Pin | Usage | Remarks |
---|---|---|
1 | SLDA3 | |
2 | SLDA3 | |
3 | SLDA1 | |
4 | SLDA1 | |
5 | SLDB1 | |
6 | SLDB1 | |
7 | SLDB3 | |
8 | SLDB3 |
CN101 14pin
To position tracking mechanics
Used in BMD-001, BMD-002
Pin | Usage | Remarks |
---|---|---|
1 | 5V | +5V DC |
2 | SCKSNS3 | S clock Sense |
3 | SW4 | Slide Cam SW |
4 | SW3 | 12cm SW |
5 | SW2 | 8cm SW |
6 | DISC CHUCK | |
7 | DISC IN SW | |
8 | EVER 3.3V | +3.3V DC |
9 | GND | Ground |
10 | NC | No connection |
11 | LOAD+ | to 12 |
12 | LOAD+ | |
13 | LOAD- | to 14 |
14 | LOAD- |
CN101 8pin
To position tracking mechanics
Used in BMD-003, BMD-006
Pin | Usage | Remarks |
---|---|---|
1 | ||
2 | ||
3 | ||
4 | ||
5 | ||
6 | ||
7 | ||
8 |
CN100 19pin
To disc motor
Used in BMD-001, BMD-002
Pin | Usage | Remarks |
---|---|---|
1 | HB+ | |
2 | HB- | |
3 | HW- | |
4 | HW+ | |
5 | HV- | |
6 | HV+ | |
7 | HU- | |
8 | HU+ | |
9 | U | |
10 | U | |
11 | V | |
12 | V | |
13 | W | |
14 | W | |
15 | FGND | Ground |
16 | SIGGND | Ground |
17 | INSW | |
18 | SCK5V | |
19 | SCKSNS |
CN100 18pin
To disc motor
Used in BMD-003, BMD-006
Pin | Usage | Remarks |
---|---|---|
1 | ||
2 | ||
3 | ||
4 | ||
5 | ||
6 | ||
7 | ||
8 | ||
9 | ||
10 | ||
11 | ||
12 | ||
13 | ||
14 | ||
15 | ||
16 | ||
17 | ||
18 |
CN300 45pin
JTAG (check service manual)
Used in BMD-001, BMD-002, BMD-003
Pin | Usage | Remarks |
---|---|---|
1 | 3.3V | |
2 | 3.3V | |
3 | 5V | |
4 | 5V | |
5 | RESERVED | |
6 | RESERVED | |
7 | RESERVED | |
8 | TRACESYNC | |
9 | PIPESTAT0 | |
10 | PIPESTAT1 | |
11 | PIPESTAT2 | |
12 | TRACECLK | |
13 | TRACEPKT15 | |
14 | TRACEPKT14 | |
15 | TRACEPKT11 | |
16 | TRACEPKT13 | |
17 | TRACEPKT10 | |
18 | TRACEPKT6 | |
19 | TRACEPKT9 | |
20 | TRACEPKT3 | |
21 | TRACEPKT8 | |
22 | TRACEPKT1 | |
23 | TRACEPKT5 | |
24 | TRACEPKT12 | |
25 | TRACEPKT2 | |
26 | TRACEPKT7 | |
27 | TRACEPKT0 | |
28 | TRACEPKT4 | |
29 | TINT | |
30 | TMS | |
31 | TDO | |
32 | JTSEL | |
33 | TCK | |
34 | NTRST | |
35 | RTCK | |
36 | TDI | |
37 | NSRST | |
38 | RXD | |
39 | TXD | |
40 | DBDRQ | |
41 | DBGACK | |
42 | GND | Ground |
43 | GND | Ground |
44 | GND | Ground |
45 | GND | Ground |
CN502 4pin
To mainboard, Power
Used in BMD-001, BMD-002, BMD-003, BMD-006
Pin | Usage | Remarks |
---|---|---|
1 | 12V | |
2 | GND | Ground |
3 | GND | Ground |
4 | 5V |
|