Updating Bluray Drive Firmware on Linux: Difference between revisions

From PS3 Developer wiki
Jump to navigation Jump to search
Line 164: Line 164:


* Tested with my PS3 slim and OtherOS++.
* Tested with my PS3 slim and OtherOS++.
* It should work on PC too. You can update your BD drive on PC.


<pre>
<pre>

Revision as of 13:11, 3 October 2013

Introduction

  • No use actually but just for the sake of scientific research :)

Current BD FW Version

Using Storage Manager service get_version: 

sudo ./ps3dm sm get_version
00 03 00 50 00 00 00 00

Using SC Manager service get_region_data: 

sudo ps3dm scm get_region_data 8 | hexdump -C
00000000  00 03 00 50 00 00 00 00  00 00 00 00 00 00 00 00  |...P............|
00000010  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
00000030

Or reading it from BD drive istelf, see http://www.ps3devwiki.com/wiki/BD_Drive_Reverse_Engineering#Get_Version.

BD Drive Type

  • Use SCSI Inquiry to fetch BD drive identification string.
sudo sg_inq /dev/sr0
  • PUP file contains several BD update packages.
  • Update manager matches BD drive type against h_id from update package header.
  • h_id is at offset 0x8 (8 bytes) in the update package header.
  • E.g. h_id from BDPT_FIRMWARE_PACKAGE_306R.pkg is 0x0000000000000007.
Identification string Type Flag
SONY EmerFlashROM 0x2100000000000001 0
SONY PS-EMBOOT 300R 0x2100000000000001 0
SONY BDRW AQUAM(BDIT) 0x1100000000000001 0
SONY PS-SYSTEM 300R 0x1100000000000001 0
SONY PS-SYSTEM V300 0x1100000000000001 0
SCEI EMER-FLASH-8 0x2200000000000002 0
SONY PS-EMBOOT 301R 0x2200000000000002 0
SONY PS-SYSTEM 301R 0x1200000000000002 0
SONY PS-EMBOOT 302R 0x2200000000000003 1
SONY PS-SYSTEM 302R 0x1200000000000003 1
SONY PS-EMBOOT 303R 0x2200000000000004 0
SONY PS-SYSTEM 303R 0x1200000000000004 0
SONY PS-EMBOOT 304R 0x2200000000000005 1
SONY PS-SYSTEM 304R 0x1200000000000005 1
SONY PS-EMBOOT 306R 0x2200000000000007 1
SONY PS-SYSTEM 306R 0x1200000000000007 1
SONY PS-EMBOOT 308R 0x2200000000000008 1
SONY PS-SYSTEM 308R 0x1200000000000008 1
SONY PS-EMBOOT 310R 0x2200000000000009 1
SONY PS-SYSTEM 310R 0x1200000000000009 1
SONY PS-EMBOOT 312R 0x220000000000000A 1
SONY PS-SYSTEM 312R 0x120000000000000A 1
SONY PS-EMBOOT 314R 0x220000000000000B 1
SONY PS-SYSTEM 314R 0x120000000000000B 1

BD drive type and FW type check: 

if ((type & 0x00FFFFFFFFFFFFFF) == h_id)
   FW is OK
else
   FW is NOT OK
fi

Sending BD Firmware to BD Drive

  • BD update package is first decrypted and then sent to BD drive.
  • BD buffer 0 is used to send BD firmware to BD drive.
  • The BD firmware is sent in chunks of size 0x8000 bytes with SCSI command WRITE BUFFER mode 7.

See my bd_update_fw tool for PS3 Linux.

http://gitorious.ps3dev.net/ps3linux/bd-tools

Test

  • Tested with my PS3 slim and OtherOS++.
  • It should work on PC too. You can update your BD drive on PC.
sudo ./bd_update_fw -v -f ~/ofw355/BDPT_FIRMWARE_PACKAGE_306R.bin/content
firmware length 786432
firmware h_id 0
=== INQUIRY (0x12) ===
vendor id SONY    
product id PS-SYSTEM   306R
=== START STOP (0x1b) ===
=== TEST UNIT READY (0x00) ===
TEST UNIT READY failed: status 2 host status 0 driver status 8
sense buffer: 70 00 02 00 00 00 00 0a 00 00 00 00 3a 00 00 00 
=== WRITE BUFFER (0x3b): offset 0 length 8000 ===
=== WRITE BUFFER (0x3b): offset 8000 length 8000 ===
=== WRITE BUFFER (0x3b): offset 10000 length 8000 ===
=== WRITE BUFFER (0x3b): offset 18000 length 8000 ===
=== WRITE BUFFER (0x3b): offset 20000 length 8000 ===
=== WRITE BUFFER (0x3b): offset 28000 length 8000 ===
=== WRITE BUFFER (0x3b): offset 30000 length 8000 ===
=== WRITE BUFFER (0x3b): offset 38000 length 8000 ===
=== WRITE BUFFER (0x3b): offset 40000 length 8000 ===
=== WRITE BUFFER (0x3b): offset 48000 length 8000 ===
=== WRITE BUFFER (0x3b): offset 50000 length 8000 ===
=== WRITE BUFFER (0x3b): offset 58000 length 8000 ===
=== WRITE BUFFER (0x3b): offset 60000 length 8000 ===
=== WRITE BUFFER (0x3b): offset 68000 length 8000 ===
=== WRITE BUFFER (0x3b): offset 70000 length 8000 ===
=== WRITE BUFFER (0x3b): offset 78000 length 8000 ===
=== WRITE BUFFER (0x3b): offset 80000 length 8000 ===
=== WRITE BUFFER (0x3b): offset 88000 length 8000 ===
=== WRITE BUFFER (0x3b): offset 90000 length 8000 ===
=== WRITE BUFFER (0x3b): offset 98000 length 8000 ===
=== WRITE BUFFER (0x3b): offset a0000 length 8000 ===
=== WRITE BUFFER (0x3b): offset a8000 length 8000 ===
=== WRITE BUFFER (0x3b): offset b0000 length 8000 ===
=== WRITE BUFFER (0x3b): offset b8000 length 8000 ===
=== TEST UNIT READY (0x00) ===
TEST UNIT READY failed: status 2 host status 0 driver status 8
sense buffer: 70 00 02 00 00 00 00 0a 00 00 00 00 04 07 00 00 
req sense 20407
=== TEST UNIT READY (0x00) ===
TEST UNIT READY failed: status 2 host status 0 driver status 8
sense buffer: 70 00 02 00 00 00 00 0a 00 00 00 00 04 07 00 00 
req sense 20407
=== TEST UNIT READY (0x00) ===
TEST UNIT READY failed: status 2 host status 0 driver status 8
sense buffer: 70 00 02 00 00 00 00 0a 00 00 00 00 04 07 00 00 
req sense 20407
=== TEST UNIT READY (0x00) ===
TEST UNIT READY failed: status 2 host status 0 driver status 8
sense buffer: 70 00 02 00 00 00 00 0a 00 00 00 00 04 07 00 00 
req sense 20407
=== TEST UNIT READY (0x00) ===
TEST UNIT READY failed: status 2 host status 0 driver status 8
sense buffer: 70 00 02 00 00 00 00 0a 00 00 00 00 04 07 00 00 
req sense 20407
=== TEST UNIT READY (0x00) ===
TEST UNIT READY failed: status 2 host status 0 driver status 8
sense buffer: 70 00 02 00 00 00 00 0a 00 00 00 00 04 07 00 00 
req sense 20407
=== TEST UNIT READY (0x00) ===
TEST UNIT READY failed: status 2 host status 0 driver status 8
sense buffer: 70 00 02 00 00 00 00 0a 00 00 00 00 04 07 00 00 
req sense 20407
=== TEST UNIT READY (0x00) ===
TEST UNIT READY failed: status 2 host status 0 driver status 8
sense buffer: 70 00 06 00 00 00 00 0a 00 00 00 00 29 00 00 00 
req sense 62900
=== TEST UNIT READY (0x00) ===
TEST UNIT READY failed: status 2 host status 0 driver status 8
sense buffer: 70 00 02 00 00 00 00 0a 00 00 00 00 04 01 00 00 
req sense 20401
=== TEST UNIT READY (0x00) ===
TEST UNIT READY failed: status 2 host status 0 driver status 8
sense buffer: 70 00 02 00 00 00 00 0a 00 00 00 00 04 01 00 00 
req sense 20401
=== TEST UNIT READY (0x00) ===
TEST UNIT READY failed: status 2 host status 0 driver status 8
sense buffer: 70 00 02 00 00 00 00 0a 00 00 00 00 04 01 00 00 
req sense 20401
=== TEST UNIT READY (0x00) ===
TEST UNIT READY failed: status 2 host status 0 driver status 8
sense buffer: 70 00 02 00 00 00 00 0a 00 00 00 00 04 01 00 00 
req sense 20401
=== TEST UNIT READY (0x00) ===
TEST UNIT READY failed: status 2 host status 0 driver status 8
sense buffer: 70 00 02 00 00 00 00 0a 00 00 00 00 04 01 00 00 
req sense 20401
=== TEST UNIT READY (0x00) ===
TEST UNIT READY failed: status 2 host status 0 driver status 8
sense buffer: 70 00 02 00 00 00 00 0a 00 00 00 00 3a 00 00 00
Retrieved from "http://www.psdevwiki.com/ps3/index.php?title=Updating_Bluray_Drive_Firmware_on_Linux&oldid=23564"