Template:QA dehashing: Difference between revisions
Jump to navigation
Jump to search
mNo edit summary |
mNo edit summary |
||
Line 1: | Line 1: | ||
<ol> | |||
<li> Patch as normal downgrader (ROS 0/1 + RVK prg/pkg)</li> | |||
<li> install prepatched firmware in service mode</li> | |||
</ol> | |||
Above is already done if you just downgraded | Above is already done if you just downgraded | ||
Dump the flash first, in case you brick on dehashing, you can easily flash this one back to debrick | Dump the flash first, in case you brick on dehashing, you can easily flash this one back to debrick | ||
<ol> | |||
<li> Install and run [http://www.ps3devwiki.com/files/flash/Tools/toggle-qa/ QA-toggle] and make sure it beeps as written in that readme | |||
<ul><li>Note: for above to work, you need a BD drive connected and married to the console (except [[CECH-25xx]] and later).</li> | |||
<li>Note: to make sure you enabled [[QA_Flagging|QA]], not accidently disable it, do the button combo (if it shows menu, then console is [[QA_Flagging|QA-flagged]] correct. Remove the QA-toggle package to prevent it from getting QA-flag reset). | |||
::''Set your cursor on Network Settings and press the key combo (all at the same time): L1+L2+L3(press_left_stick)+R1+R2+dpad_down''</li></ul></li> | |||
<li> Poweroff console | |||
<li> Put unpatched official firmware (e.g. [http://www.ps3devwiki.com/wiki/3.55_CEX 3.55]) or a patched CFW like KMEAW on USB Mass Storage device as /PS3/UPDATE/PS3UPDAT.PUP and insert in PS3 | |||
<li> Boot into [http://www.ps3devwiki.com/wiki/Talk:Playstation_Update_Package_%28PUP%29#PS3_Recovery_Menu Recovery Menu], select "''6. System Update''" to reinstall firmware.</li> | |||
<li> If installation finishes without error (there will be no logs you can check!) and boots XMB OK, then dehashing was successful. Congrats, you now finished downgrading and dehashing. Console runs 3.55 and any firmware of choice can be installed, no longer needing to be patched for downgrader.</li> | |||
[[Category:Software]][[Category:Templates]] | [[Category:Software]][[Category:Templates]] |
Revision as of 15:33, 24 November 2012
- Patch as normal downgrader (ROS 0/1 + RVK prg/pkg)
- install prepatched firmware in service mode
Above is already done if you just downgraded
Dump the flash first, in case you brick on dehashing, you can easily flash this one back to debrick
- Install and run QA-toggle and make sure it beeps as written in that readme
- Note: for above to work, you need a BD drive connected and married to the console (except CECH-25xx and later).
- Note: to make sure you enabled QA, not accidently disable it, do the button combo (if it shows menu, then console is QA-flagged correct. Remove the QA-toggle package to prevent it from getting QA-flag reset).
- Set your cursor on Network Settings and press the key combo (all at the same time): L1+L2+L3(press_left_stick)+R1+R2+dpad_down
- Poweroff console
- Put unpatched official firmware (e.g. 3.55) or a patched CFW like KMEAW on USB Mass Storage device as /PS3/UPDATE/PS3UPDAT.PUP and insert in PS3
- Boot into Recovery Menu, select "6. System Update" to reinstall firmware.
- If installation finishes without error (there will be no logs you can check!) and boots XMB OK, then dehashing was successful. Congrats, you now finished downgrading and dehashing. Console runs 3.55 and any firmware of choice can be installed, no longer needing to be patched for downgrader.