Editing WLAN Access Point with PS3 Jupiter

=Introduction=

* WLAN AP driver for PS3 Jupiter (slim only)
* Please report bugs and problems to me.

=Features=

* 802.11bg support
* Wireless Extension interface
* WEP40, WEP104 and WPA1(TKIP+AES) support

=PS3 Jupiter Driver=

* Source code: http://gitorious.ps3dev.net/ps3linux/ps3jupiter

==Compiling==

* You can compile it on PS3 Linux or cross-compile on a Linux PC
* But first you have to build a Linux kernel from source.

<pre>
git clone git://gitorious.ps3dev.net/ps3linux/ps3jupiter.git
cd ps3jupiter
make KSRC_DIR=/home/glevand/kernel/linux-3.5.4 ARCH=powerpc CROSS_COMPILE=powerpc64-linux-
</pre>

==Configuration==

* For configuration you need wireless-tools: iwconfig and so on.

<pre>
# Load the drivers

insmod ./ps3_jupiter.ko
insmod ./ps3_jupiter_ap.ko

iwconfig wlan1
wlan1     IEEE 802.11bg  ESSID:off/any  Nickname:"ps3_jupiter_ap"
          Mode:Master  Channel:0

# Configure channel and SSID

iwconfig wlan1 channel 6
iwconfig wlan1 essid wlan_rockz

# Configure opmode

iwpriv wlan1 set_opmode 1 (0 = 11b, 1 = 11g, 2 = 11bg)

iwconfig wlan1
wlan1     IEEE 802.11bg  ESSID:"wlan_rockz"  Nickname:"ps3_jupiter_ap"
          Mode:Master  Frequency:2.437 GHz

ifconfig wlan1 192.168.201.200
ifconfig wlan1 up

# WLAN LED should be green now

# Connect to the AP with a PC client and try to ping your AP
# Set static IP address ony your client, e.g. 192.168.201.201
</pre>

==No Security==

<pre>
ifconfig wlan1 down

iwconfig wlan1 channel 6
iwconfig wlan1 essid wlan_rockz

iwpriv wlan1 set_wpa_mode 0

ifconfig wlan1 up
</pre>

==WEP40==

<pre>
ifconfig wlan1 down

iwconfig wlan1 channel 6
iwconfig wlan1 essid wlan_rockz

iwpriv wlan1 set_wpa_mode 0

iwconfig wlan1 key 0123456789

ifconfig wlan1 up
</pre>

==WEP104==

<pre>
ifconfig wlan1 down

iwconfig wlan1 channel 6
iwconfig wlan1 essid wlan_rockz

iwpriv wlan1 set_wpa_mode 0

iwconfig wlan1 key 01234567890123456789012345

ifconfig wlan1 up
</pre>

==WPA1-TKIP==

<pre>
ifconfig wlan1 down

iwconfig wlan1 channel 6
iwconfig wlan1 essid wlan_rockz

iwpriv wlan1 set_wpa_mode 1
iwpriv wlan1 set_wpa_group 2
iwpriv wlan1 set_wpa_pairwise 2
iwpriv wlan1 set_wpa_psk ps3_wlan

ifconfig wlan1 up
</pre>

==WPA1-AES==

<pre>
ifconfig wlan1 down

iwconfig wlan1 channel 6
iwconfig wlan1 essid wlan_rockz

iwpriv wlan1 set_wpa_mode 1
iwpriv wlan1 set_wpa_group 3
iwpriv wlan1 set_wpa_pairwise 3
iwpriv wlan1 set_wpa_psk ps3_wlan

ifconfig wlan1 up
</pre>

==wpa_supplicant.conf for WPA1-TKIP or WPA1-AES==

* This configuration file i used on my PC WLAN client to test PS3 WLAN AP.

<pre>
ctrl_interface=/var/run/wpa_supplicant
eapol_version=1
ap_scan=1
fast_reauth=1

network={
	ssid="wlan_rockz"
	proto=WPA
	key_mgmt=WPA-PSK
	pairwise=CCMP TKIP
	group=CCMP TKIP
	psk="ps3_wlan"
	priority=2
}
</pre>

==WPA2==

* It seems that WPA2 is not supported.
* Does AP on GameoS support WPA2 ???

==Test==

* Tested on my PS3 Slim with Linux kernel 3.5.4 and Debian
* Tested successfully with no security, WEP40, WEP104, WPA1-TKIP and WPA1-AES

=Testing AP Mode with libusb=

* No kernel drivers are involved
* Easier to test than with Linux kernel drivers
* I use it to test new and unknown commands
* Source code: http://gitorious.ps3dev.net/ps3linux/ps3jupiter_libusb
* You need a patched Linux 3.2 kernel too, see here: http://www.ps3devwiki.com/wiki/Linux_3_on_PS3

=TODO List=

* Find out why AP stops when a client uses incorrect WPA PSK.
* Find out if WPA2 is possible
* Find out how to get connected station MAC address and how to enable MAC access control
* Find out if it is possible to use STA and AP modes simultaneously. That would be really cool, e.g. we could make a wireless repeater.

=Future Work=

* Create a LiveCD with WLAN AP mode
* Create a petitboot with WLAN AP mode
* Implement PS3 WLAN drivers for PS3 PHAT (not able to do currently because i don't have a PS3 PHAT for testing)

=Links=

* Linux kernel 3.2 and libsusb problem: http://marc.info/?l=linux-usb&m=132440828606642&w=2