Editing Template talk:Syscon pinout LQFP 100 pins

== Legends ==
=== NEC Renesas names ===
''Control''
* FLMD0: Flash programming mode
* RESET: Reset
* TOOL0: Data input/output for tool
* TOOL1: Clock output for tool

''Data''
* ANIxx: Analog input
* ANOxx: Analog output
* INTPxx: External interrupt input
* KRx: Key return
* RxDx: Receive data
* SCKxx: Serial clock input/output
* SCLxx: Serial clock input/output
* SDAxx: Serial data input/output
* SIxx: Serial data input
* SOxx: Serial data output
* TIxx: Timer input
* TOxx: Timer output
* TxDx: Transmit data

''Ports''
* P00-P06: Port 0
* P10-P17: Port 1
* P20-P27: Port 2
* P30-P31: Port 3
* P40-P47: Port 4
* P50-P57: Port 5
* P60-P67: Port 6
* P70-P77: Port 7
* P80-P87: Port 8
* P110-P111: Port 11
* P120-P124: Port 12
* P130-P131: Port 13
* P140-P145: Port 14
* P150-P157: Port 15

''Power''
* AVREFx: Analog reference voltage
* AVSS: Analog ground
* EVDDx: Power supply for port
* EVSSx: Ground for port
* EXCLK: External clock input(main system clock)
* EXLVI: External potential input for low-voltage detector
* REGC: Regulator capacitance
* VDD: Power supply
* VSS: Ground

''Others''
* PCLBUZx: Programmable clock output/buzzer output
* RTC1HZ: Real-time counter correction clock (1 Hz) output
* RTCCL: Real-time counter clock (32 kHz original oscillation) output
* RTCDIV: Real-time counter clock (32 kHz divided frequency) output
* X1, X2: Crystal oscillator (main system clock)
* XT1, XT2: Crystal oscillator (subsystem clock)

''EXTERNAL Memory BUS INTERFACE pin function names (optional, it seems syscon doesnt uses it)''
* EX0-EX31: External extension bus
* RD: Read strobe
* WR0: Lower byte write strobe
* WR1: Upper byte write strobe
* CLKOUT: Clock output
* WAIT: Wait
* ASTB: Address strobe