Editing Template:Toshiba T6UN6EFG Pinout

Jump to navigation Jump to search
Warning: You are not logged in. Your IP address will be publicly visible if you make any edits. If you log in or create an account, your edits will be attributed to your username, along with other benefits.

The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then publish the changes below to finish undoing the edit.

Latest revision Your text
Line 1: Line 1:
QFP package, 80pin
*Submodels:
**Toshiba T6UN6EFG-001
**Toshiba T6UN6EFG-002
**Toshiba T6UN6EFG-003
{|class="wikitable"
{|class="wikitable"
|+Toshiba T6UN6EFG Pinout {{ed right|Toshiba T6UN6EFG Pinout}}
|+Toshiba T6UN6EFG Pinout {{ed right|Toshiba T6UN6EFG Pinout}}
! {{cellcolors|#eaeaff||center}} Pin # !! {{cellcolors|#eaeaff||center}} Name !! {{cellcolors|#eaeaff||center}} Port !! {{cellcolors|#eaeaff||center}} Description
! Pin # !! Name !! Port !! Description
|-
|-
| 1 || {{cellcolors|#000000|#ffffff}} GND || || To ground
| 1 || {{cellcolors|#000000|#ffffff}} GND || || To ground
|-
|-
| 2 || {{cellcolors|#ff9933}} V_STBY || || 2.8V Standby. Power for Toshiba T6UN6EFG, EEPROM, {{padps}}, and LED's
| 2 || {{cellcolors|#ff9933}} V_STBY || || 2.8V Standby. Power for {{padps}}, LED's, EEPROM, etc... and capacitor to ground
|-
|-
| 3 || {{cellcolors|#000000|#ffffff}} GND || || To ground
| 3 || || || rowspan="2" | Not connected ?
|-
|-
| 4 || {{cellcolors|#ff3333}} V_BATT || || <abbr title="located close to the USB ESD filter">2x Capacitor network</abbr> to ground, and <abbr title="147K in VX4 boards">resistor</abbr> to battery and Texas Instruments SN89062 pin 16 in VX4 boards
| 4 || ||  
|-
|-
| 5 || {{cellcolors|#ff9933}} V_STBY || || 2.8V Standby. Power for Toshiba T6UN6EFG, EEPROM, {{padps}}, and LED's
| 5 || {{cellcolors|#ff9933}} V_STBY || || 2.8V Standby. Power for {{padps}}, LED's, EEPROM, etc... and capacitor to ground
|-
|-
| 6 || {{cellcolors|#ff77bb}} SENSOR_ACCL_X || || To acccelerometer X axis through <abbr title="33K in VX4 boards">resistor</abbr>
| 6 || {{cellcolors|#ffff66}} ACCL_X || || Connected to acccelerometer X axis through <abbr title="33K in VX4 boards">resistor</abbr>
|-
|-
| 7 || {{cellcolors|#ff77bb}} SENSOR_ACCL_Y || || To acccelerometer Y axis through <abbr title="33K in VX4 boards">resistor</abbr>
| 7 || {{cellcolors|#ffff66}} ACCL_Y || || Connected to acccelerometer Y axis through <abbr title="33K in VX4 boards">resistor</abbr>
|-
|-
| 8 || {{cellcolors|#ff77bb}} SENSOR_ACCL_Z || || To acccelerometer Z axis through <abbr title="33K in VX4 boards">resistor</abbr>
| 8 || {{cellcolors|#ffff66}} ACCL_Z || || Connected to acccelerometer Z axis through <abbr title="33K in VX4 boards">resistor</abbr>
|-
|-
| 9 || {{cellcolors|#ff77bb}} SENSOR_GYRO || || To gyroscope through <abbr title="33K in VX4 boards">resistor</abbr>
| 9 || {{cellcolors|#ffff66}} GYRO || || Connected to gyroscope through <abbr title="33K in VX4 boards">resistor</abbr>
|-
|-
| 10 || {{cellcolors|#ff9933}} V_STBY || || 2.8V Standby. Power for Toshiba T6UN6EFG, EEPROM, {{padps}}, and LED's
| 10 || || ||
|-
|-
| 11 || {{cellcolors|#555555|#ffffff}} SLAVES_RESET || || Texas Instruments SN84001 pin 2, and ALPS 413A pin 5 through <abbr title="47ohm in VX4 boards">resistor network</abbr> in VX4 boards
| 11 || POWER_CTRL ? || || Texas Instruments SN84001, pin 2 in VX4 boards
|-
|-
| 12 || {{cellcolors|#000000|#ffffff}} GND || || To ground
| 12 || {{cellcolors|#000000|#ffffff}} GND || || To ground
|-
|-
| 13 || {{cellcolors|#3366ff}} BT_POWER_CTRL ? || || Texas Instruments SN89062, pin 4 in VX4 boards
| 13 || POWER_UNK_1 || || Texas Instruments SN89062, pin 4 in VX4 boards
|-
|-
| 14 || {{cellcolors|#77aaff}} <abbr title="either... TX, RX, RTS, or CTS">BT_UART_1</abbr> ? || || To BT module (ALPS 413A pin 8 in VX4 boards) through <abbr title="33ohm in VX4 boards">resistor</abbr>
| 14 || || ||
|-
|-
| 15 || {{cellcolors|#77aaff}} <abbr title="either... TX, RX, RTS, or CTS">BT_UART_2</abbr> ? || || To BT module (ALPS 413A pin 6 in VX4 boards) through <abbr title="47ohm in VX4 boards">4x resistor network</abbr>
| 15 || || ||
|-
|-
| 16 || {{cellcolors|#77aaff}} <abbr title="either... TX, RX, RTS, or CTS">BT_UART_3</abbr> ? || || To BT module (ALPS 413A pin 9 in VX4 boards) through <abbr title="47ohm in VX4 boards">4x resistor network</abbr>
| 16 || || ||
|-
|-
| 17 || {{cellcolors|#77aaff}} <abbr title="either... TX, RX, RTS, or CTS">BT_UART_4</abbr> ? || || To BT module (ALPS 413A pin 7 in VX4 boards)
| 17 || || ||
|-
|-
| 18 || {{cellcolors|#3366ff}} BT_UNK_1 || || To BT module (ALPS 413A pin 14 in VX4 boards)
| 18 || || ||
|-
|-
| 19 || {{cellcolors|#3366ff}} BT_UNK_2 || || To BT module (ALPS 413A pin 28 in VX4 boards)
| 19 || || ||
|-
|-
| 20 || {{cellcolors|#000000|#ffffff}} GND || || To ground
| 20 || {{cellcolors|#000000|#ffffff}} GND || || To ground
|-
|-
| 21 || {{cellcolors|#ff9933}} V_STBY || || 2.8V Standby. Power for Toshiba T6UN6EFG, EEPROM, {{padps}}, and LED's
| 21 || {{cellcolors|#ff9933}} V_STBY || || 2.8V Standby. Power for {{padps}}, LED's, EEPROM, etc...
|-
|-
| 22 || {{cellcolors|#000000|#ffffff}} GND || || To ground
| 22 || {{cellcolors|#000000|#ffffff}} GND || || To ground
|-
|-
| 23 || {{cellcolors|#0077aa}} LED_1 || || To led 1 cathode through <abbr title="180ohm in VX4 boards">4x resistor network</abbr> (RN3 in VX4 boards)
| 23 || LED1 || || Connected to a 180ohm resistor network, then to led 1 cathode
|-
|-
| 24 || {{cellcolors|#0077aa}} LED_2 || || To led 2 cathode through <abbr title="180ohm in VX4 boards">4x resistor network</abbr> (RN3 in VX4 boards)
| 24 || LED2 || || Connected to a 180ohm resistor network, then to led 2 cathode
|-
|-
| 25 || {{cellcolors|#0077aa}} LED_3 || || To led 3 cathode through <abbr title="180ohm in VX4 boards">4x resistor network</abbr> (RN3 in VX4 boards)
| 25 || LED3 || || Connected to a 180ohm resistor network, then to led 3 cathode
|-
|-
| 26 || {{cellcolors|#0077aa}} LED_4 || || To led 4 cathode through <abbr title="180ohm in VX4 boards">4x resistor network</abbr> (RN3 in VX4 boards)
| 26 || LED4 || || Connected to a 180ohm resistor network, then to led 4 cathode
|-
|-
| 27 || || || Not connected ? (for the PS button backlight led in prototypes ?)
| 27 || || ||
|-
|-
| 28 || {{cellcolors|#9933cc}} MOTOR_SMALL || || Small Motor + (rumble)
| 28 || SM+ || || Small Motor + (rumble)
|-
|-
| 29 || {{cellcolors|#9933cc}} MOTOR_BIG || || Big Motor + (rumble)
| 29 || BM+ || || Big Motor + (rumble)
|-
|-
| 30 || {{cellcolors|#d699ff}} EEPROM_<abbr title="Master clock">SPI_CLOCK</abbr> || || EEPROM, pin 6 in VX4 boards
| 30 || EEPROM_UNK_DATA_1 || || EEPROM, pin 6 in VX4 boards
|-
|-
| 31 || {{cellcolors|#d699ff}} EEPROM_SELECT || || EEPROM, pin 1 in VX4 boards
| 31 || EEPROM_UNK_DATA_2 || || EEPROM, pin 1 in VX4 boards
|-
|-
| 32 || {{cellcolors|#000000|#ffffff}} GND || || To ground
| 32 || {{cellcolors|#000000|#ffffff}} GND || || To ground
|-
|-
| 33 || {{cellcolors|#ff9933}} V_STBY || || 2.8V Standby. Power for Toshiba T6UN6EFG, EEPROM, {{padps}}, and LED's
| 33 || {{cellcolors|#ff9933}} V_STBY || || 2.8V Standby. Power for {{padps}}, LED's, EEPROM, etc...
|-
|-
| 34 || {{cellcolors|#d699ff}} EEPROM_<abbr title="Master-Out Slave-In">SPI_MOSI</abbr> || || EEPROM, pin 5 in VX4 boards
| 34 || EEPROM_UNK_DATA_3 || || EEPROM, pin 5 in VX4 boards
|-
|-
| 35 || {{cellcolors|#d699ff}} EEPROM_<abbr title="Master-In Slave-Out">SPI_MISO</abbr> || || EEPROM, pin 2 in VX4 boards
| 35 || EEPROM_UNK_DATA_4 || || EEPROM, pin 2 in VX4 boards
|-
|-
| 36 || STICKS_POWER_CTRL ? || || Texas Instruments SN89062, pin 17 in VX4 boards
| 36 || POWER_UNK_2 || || Texas Instruments SN89062, pin 17 in VX4 boards
|-
|-
| 37 || {{cellcolors|#aa7744}} LX_V ? || || <abbr title="46.6K located next to Toshiba T6UN6EFG pin 40 corner">4x Resistor network</abbr> (RN8 in VX4 boards), and then <abbr title="located close to Toshiba T6UN6EFG pin 41 corner">2x Capacitor network</abbr> to ground (CN9 in VX4 boards), and to Texas Instruments SN84001 pin 21 in VX4 boards
| 37 || {{cellcolors|#79604e}} STICKS_UNK_1 || || Texas Instruments SN84001, pin 21 in VX4 boards
|-
|-
| 38 || {{cellcolors|#aa7744}} LY_V ? || || <abbr title="46.6K located next to Toshiba T6UN6EFG pin 40 corner">4x Resistor network</abbr> (RN8 in VX4 boards), and then <abbr title="located close to Toshiba T6UN6EFG pin 41 corner">2x Capacitor network</abbr> to ground (CN9 in VX4 boards), and to Texas Instruments SN84001 pin 20 in VX4 boards
| 38 || {{cellcolors|#79604e}} STICKS_UNK_2 || || Texas Instruments SN84001, pin 20 in VX4 boards
|-
|-
| 39 || {{cellcolors|#aa7744}} RX_V ? || || <abbr title="46.6K located next to Toshiba T6UN6EFG pin 40 corner">4x Resistor network</abbr> (RN8 in VX4 boards), and then <abbr title="located close to Toshiba T6UN6EFG pin 41 corner">2x Capacitor network</abbr> to ground (CN10 in VX4 boards), and to Texas Instruments SN84001 pin 19 in VX4 boards
| 39 || {{cellcolors|#79604e}} STICKS_UNK_3 || || Texas Instruments SN84001, pin 19 in VX4 boards
|-
|-
| 40 || {{cellcolors|#aa7744}} RY_V ? || || <abbr title="46.6K located next to Toshiba T6UN6EFG pin 40 corner">4x Resistor network</abbr> (RN8 in VX4 boards), and then <abbr title="located close to Toshiba T6UN6EFG pin 41 corner">2x Capacitor network</abbr> to ground (CN10 in VX4 boards), and to Texas Instruments SN84001 pin 18 in VX4 boards
| 40 || {{cellcolors|#79604e}} STICKS_UNK_4 || || Texas Instruments SN84001, pin 18 in VX4 boards
|-
|-
| 41 || {{cellcolors|#007700}} BATT_CHARGE_SETPOINT || || Texas Instruments SN89062, pin 21 in VX4 boards
| 41 || POWER_UNK_3 || || Texas Instruments SN89062, pin 21 in VX4 boards
|-
|-
| 42 || {{cellcolors|#008800}} BATT_USB_POWER_GOOD ? || || Texas Instruments SN89062, pin 5 in VX4 boards
| 42 || POWER_UNK_4 || || Texas Instruments SN89062, pin 5 in VX4 boards
|-
|-
| 43 || {{cellcolors|#008800}} BATT_CHARGE_START ? || || Texas Instruments SN89062, pin 2 in VX4 boards
| 43 || POWER_UNK_5 || || Texas Instruments SN89062, pin 2 in VX4 boards
|-
|-
| 44 || {{cellcolors|#009900}} BATT_STATUS_1 ? || || Texas Instruments SN89062, pin 10 in VX4 boards (and TP8 in VX4 boards)
| 44 || POWER_UNK_6 || || Texas Instruments SN89062, pin 10 in VX4 boards
|-
|-
| 45 || {{cellcolors|#009900}} BATT_STATUS_2 ? || || Texas Instruments SN89062, pin 12 in VX4 boards (and TP9 in VX4 boards)
| 45 || POWER_UNK_7 || || Texas Instruments SN89062, pin 12 in VX4 boards
|-
|-
| 46 || {{cellcolors|#808080|#FF4500}} COM_3 || || COM 3 (Common Line for Digital {{padl3}} {{padselect}} {{padstart}} {{padr3}}))
| 46 || {{cellcolors|#666666|#ffffff}} COM_3 || || COM 3 (Common Line for Digital {{padl3}} {{padselect}} {{padstart}} {{padr3}}))
|-
|-
| 47 || {{cellcolors|#ffff00}} BUTTON_ANALOG_UP || || {{dpadu}}
| 47 || {{cellcolors|#bbbbff}} DU || || {{dpadu}}
|-
|-
| 48 || {{cellcolors|#ffff00}} BUTTON_ANALOG_RIGHT || || {{dpadr}}
| 48 || {{cellcolors|#bbbbff}} DR || || {{dpadr}}
|-
|-
| 49 || {{cellcolors|#ffff00}} BUTTON_ANALOG_DOWN || || {{dpadd}}
| 49 || {{cellcolors|#bbbbff}} DD || || {{dpadd}}
|-
|-
| 50 || {{cellcolors|#ffff00}} BUTTON_ANALOG_LEFT || || {{dpadl}}
| 50 || {{cellcolors|#bbbbff}} DL || || {{dpadl}}
|-
|-
| 51 || {{cellcolors|#ff9933}} V_STBY || || 2.8V Standby. Power for Toshiba T6UN6EFG, EEPROM, {{padps}}, and LED's
| 51 || {{cellcolors|#ff9933}} V_STBY || || 2.8V Standby. Power for {{padps}}, LED's, EEPROM, etc...
|-
|-
| 52 || {{cellcolors|#000000|#ffffff}} GND || || To ground
| 52 || {{cellcolors|#000000|#ffffff}} GND || || To ground
|-
|-
| 53 || {{cellcolors|#ffff00}} BUTTON_ANALOG_L2 || || {{padl2}}
| 53 || {{cellcolors|#bbbbff}} L2 || || {{padl2}}
|-
|-
| 54 || {{cellcolors|#ffff00}} BUTTON_ANALOG_L1 || || {{padl1}}
| 54 || {{cellcolors|#bbbbff}} L1 || || {{padl1}}
|-
|-
| 55 || || || Not connected ? (connected to something in PP1 and PP4 boards)
| 55 || || ||
|-
|-
| 56 || {{cellcolors|#ffff00}} BUTTON_ANALOG_R2 || || {{padr2}}
| 56 || {{cellcolors|#bbbbff}} R2 || || {{padr2}}
|-
|-
| 57 || {{cellcolors|#ffff00}} BUTTON_ANALOG_R1 || || {{padr1}}
| 57 || {{cellcolors|#bbbbff}} R1 || || {{padr1}}
|-
|-
| 58 || {{cellcolors|#ffff00}} BUTTON_ANALOG_TRIANGLE || || {{padtriangle}}
| 58 || {{cellcolors|#bbbbff}} TRIANGLE || || {{padtriangle}}
|-
|-
| 59 || {{cellcolors|#ffff00}} BUTTON_ANALOG_CIRCLE || || {{padcircle}}
| 59 || {{cellcolors|#bbbbff}} CIRCLE || || {{padcircle}}
|-
|-
| 60 || {{cellcolors|#ffff00}} BUTTON_ANALOG_CROSS || || {{padcross}}
| 60 || {{cellcolors|#bbbbff}} CROSS || || {{padcross}}
|-
|-
| 61 || {{cellcolors|#ffff00}} BUTTON_ANALOG_SQUARE || || {{padsquare}}
| 61 || {{cellcolors|#bbbbff}} SQUARE || || {{padsquare}}
|-
|-
| 62 || || || Not connected ? (connected to something in PP1 and PP4 boards)
| 62 || || ||
|-
|-
| 63 || || || Not connected ? (connected to something in PP1 and PP4 boards)
| 63 || || ||
|-
|-
| 64 || {{cellcolors|#ffff99}} BUTTON_DIGITAL_SELECT || || {{padselect}}
| 64 || {{cellcolors|#8888ff}} SELECT || || {{padselect}}
|-
|-
| 65 || {{cellcolors|#ffff99}} BUTTON_DIGITAL_L3 || || {{padl3}}
| 65 || {{cellcolors|#8888ff}} L3 || || {{padl3}}
|-
|-
| 66 || {{cellcolors|#ffff99}} BUTTON_DIGITAL_R3 || || {{padr3}}
| 66 || {{cellcolors|#8888ff}} R3 || || {{padr3}}
|-
|-
| 67 || {{cellcolors|#ffff99}} BUTTON_DIGITAL_START || || {{padstart}}
| 67 || {{cellcolors|#8888ff}} START || || {{padstart}}
|-
|-
| 68 || {{cellcolors|#ffff99|#FF4500}} BUTTON_DIGITAL_PLAYSTATION || || {{padps}}
| 68 || {{cellcolors|#ff9933}} PS || || {{padps}}
|-
|-
| 69 || || || To a testpoint (TP23 in VX4 boards), and 8.45K resistor to pin 74
| 69 || || ||
|-
|-
| 70 || {{cellcolors|#000000|#ffffff}} GND || || rowspan="3" | To ground. <abbr title="from pin 68 up to 72... by looking at the photos of the differnt revisions of the chip it seems these pins were repurposed.This pinout was traced on a VX4 board where these pins are grounded, but could be different in other boards">It seems these pins were repurposed at some point</abbr>
| 70 || {{cellcolors|#000000|#ffffff}} GND || || rowspan="3" | To ground
|-
|-
| 71 || {{cellcolors|#000000|#ffffff}} GND ||  
| 71 || {{cellcolors|#000000|#ffffff}} GND ||  
Line 147: Line 154:
| 72 || {{cellcolors|#000000|#ffffff}} GND ||  
| 72 || {{cellcolors|#000000|#ffffff}} GND ||  
|-
|-
| 73 || {{cellcolors|#ff9933}} V_STBY || || 2.8V Standby. Power for Toshiba T6UN6EFG, EEPROM, {{padps}}, and LED's
| 73 || {{cellcolors|#ff9933}} V_STBY || || 2.8V Standby. Power for {{padps}}, LED's, EEPROM, etc...
|-
|-
| 74 || || || <abbr title="located close to the USB ESD filter">2x Capacitor network</abbr> to ground, and <abbr title="8K at ambient temperature">NTC thermistor</abbr> to standby power rail, and 8.45K resistor to pin 69
| 74 || || ||
|-
|-
| 75 || {{cellcolors|#808080|#FF4500}} COM_1 || || <abbr title="located close to Texas Instruments SN84001 pin 15 corner">2x Capacitor network</abbr> to ground, and to ribbon circuit board COM 1 pin (Common Line for Analog {{dpadl}} {{dpadd}} {{dpadr}} {{dpadu}} {{padl1}} {{padl2}})
| 75 || {{cellcolors|#666666|#ffffff}} COM_1 || || COM 1 (Common Line for Analog {{dpadl}} {{dpadd}} {{dpadr}} {{dpadu}} {{padl1}} {{padl2}})
|-
|-
| 76 || {{cellcolors|#808080|#FF4500}} COM_2 || || <abbr title="located close to Texas Instruments SN84001 pin 15 corner">2x Capacitor network</abbr> to ground, and to ribbon circuit board COM 2 pin (Common Line for Analog {{padsquare}} {{padcross}} {{padcircle}} {{padtriangle}} {{padr1}} {{padr2}})
| 76 || {{cellcolors|#666666|#ffffff}} COM_2 || || COM 2 (Common Line for Analog {{padsquare}} {{padcross}} {{padcircle}} {{padtriangle}} {{padr1}} {{padr2}})
|-
|-
| 77 || {{cellcolors|#885522}} LX || || {{padlx}} <abbr title="located close to Texas Instruments SN84001 pin 15 corner">2x Capacitor network</abbr> to ground, and to Texas Instruments SN84001 pin 25 in VX4 boards
| 77 || {{cellcolors|#79604e}} LSX || || {{padlx}} Texas Instruments SN84001, pin 25 in VX4 boards
|-
|-
| 78 || {{cellcolors|#885522}} LY || || {{padly}} <abbr title="located close to Texas Instruments SN84001 pin 15 corner">2x Capacitor network</abbr> to ground, and to Texas Instruments SN84001 pin 24 in VX4 boards
| 78 || {{cellcolors|#79604e}} LSY || || {{padly}} Texas Instruments SN84001, pin 24 in VX4 boards
|-
|-
| 79 || {{cellcolors|#885522}} RX || || {{padrx}} <abbr title="located close to Texas Instruments SN84001 pin 15 corner (traces are hidden under Toshiba T6UN6EFG)">2x Capacitor network</abbr> to ground, and to Texas Instruments SN84001 pin 23 in VX4 boards
| 79 || {{cellcolors|#79604e}} RSX || || {{padrx}} Texas Instruments SN84001, pin 23 in VX4 boards
|-
|-
| 80 || {{cellcolors|#885522}} RY || || {{padry}} <abbr title="located close to Texas Instruments SN84001 pin 15 corner (traces are hidden under Toshiba T6UN6EFG)">2x Capacitor network</abbr> to ground, and to Texas Instruments SN84001 pin 22 in VX4 boards
| 80 || {{cellcolors|#79604e}} RSY || || {{padry}} Texas Instruments SN84001, pin 22 in VX4 boards
|-
|-
|}<noinclude>[[Category:Templates]]</noinclude>
|}<noinclude>[[Category:Templates]]</noinclude>
Please note that all contributions to PS3 Developer wiki are considered to be released under the GNU Free Documentation License 1.2 (see PS3 Developer wiki:Copyrights for details). If you do not want your writing to be edited mercilessly and redistributed at will, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource. Do not submit copyrighted work without permission!

To protect the wiki against automated edit spam, we kindly ask you to solve the following hCaptcha:

Cancel Editing help (opens in new window)

Templates used on this page:

Retrieved from "http://www.psdevwiki.com/ps3/Template:Toshiba_T6UN6EFG_Pinout"