Editing Template:Reference Tool models
Jump to navigation
Jump to search
The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then publish the changes below to finish undoing the edit.
| Latest revision | Your text | ||
| Line 7: | Line 7: | ||
| [[DECR-1000|DECR-1000(A/J)]] || 0x01 || [[TMU-520]] || [[K9F2G08U0M | 2x 256MB NAND]] || [[CXD2973AGB-4]] || [[CXR713F120A]] || [[TCP-520]] || 400GB || 400GB || ?0x00? || 2 ({{NO}} CEC) || {{NO}} || {{90nm}} || {{90nm}} || 4 + 2 extra || 4 (1 for dbg.) || {{YES}} || ?{{YES}}?<br/>{{NO}}<br/>{{NO}} || {{NO}} || {{YES}} <!-- external antenna --> || 2006 || =>[[1.00 DECR|1.0.0]]<br/>or <br/>=>[[2.30 DECR|2.3.0]] (since 1/2009) || <abbr title="This System Firmware doesn't exist">0.08</abbr> || contains prototype components, hardware is identical to [[DEH-R1040]] with a different label/model name. | | [[DECR-1000|DECR-1000(A/J)]] || 0x01 || [[TMU-520]] || [[K9F2G08U0M | 2x 256MB NAND]] || [[CXD2973AGB-4]] || [[CXR713F120A]] || [[TCP-520]] || 400GB || 400GB || ?0x00? || 2 ({{NO}} CEC) || {{NO}} || {{90nm}} || {{90nm}} || 4 + 2 extra || 4 (1 for dbg.) || {{YES}} || ?{{YES}}?<br/>{{NO}}<br/>{{NO}} || {{NO}} || {{YES}} <!-- external antenna --> || 2006 || =>[[1.00 DECR|1.0.0]]<br/>or <br/>=>[[2.30 DECR|2.3.0]] (since 1/2009) || <abbr title="This System Firmware doesn't exist">0.08</abbr> || contains prototype components, hardware is identical to [[DEH-R1040]] with a different label/model name. | ||
|- | |- | ||
| [[DECR-1400|DECR-1400A/J]] || 0x09 || [[DEB-001]] || [[<!--?-->S29GL128N90TFIR2|1x 16MB NOR]] || [[CXD2984AGB]] || [[ | | [[DECR-1400|DECR-1400A/J]] || 0x09 || [[DEB-001]] || [[<!--?-->S29GL128N90TFIR2|1x 16MB NOR]] || [[CXD2984AGB]] || [[CXR713120-201GB]] <!-- there is a problem here with syscon, in the DEB-001 photos uploaded yesterday the syscon is [[CXR714120-302GB]], people working with this please fix it--> || (via SB) || - || 160 GB || ?0x0A? || 1 ({{NO}} CEC) || {{PARTIAL}} || {{45nm}} || {{65nm}} || 4 || 2 (1 for dbg.) || {{NO}} || ?{{YES}}?<br/>{{NO}}<br/>{{NO}} || {{NO}} || {{YES}} || 6/2009 || =>[[2.60 DECR|2.6.0]] || =>[[2.60 DECR|2.60]] || same case as retail PS3 | ||
|- | |- | ||
|} | |} | ||
| Line 16: | Line 16: | ||
** With a pre (or equal to) [[0.85.010]] bootrom you do have two [[HDMI]] outputs. | ** With a pre (or equal to) [[0.85.010]] bootrom you do have two [[HDMI]] outputs. | ||
<!-- ** Could be turned into a {{SD}} System Debugger by changing the [[South Bridge]] firmware, adding a special CP Sister Board and using a specific {{SD}} firmware --> | <!-- ** Could be turned into a {{SD}} System Debugger by changing the [[South Bridge]] firmware, adding a special CP Sister Board and using a specific {{SD}} firmware --> | ||
** '''Not all DECR-1000 are equal! | ** '''Not all DECR-1000 are equal! Despite Sony's documentation claiming otherwise, DECR-1000 units with RSX rom version b07 and above such as refurbished/serviced units (and perhaps some others that have not been encounter) are not capable of running any firmware lower than 1.60 (from sdk 160.008) this is because the rom version is unknown/unsupported in older lv1 which will fail to initialize the RSX hardware and will cause lv1 to output a "rsx rom abort!" message, this will in turn create an exception early in lv2 boot process as it tries to use the RSX and creates a hard brick several RSX related errors such as "lv2(2): # __rsxaudio_intr_create_thread 983 ffffffff" or "graphics error 512 : 00012625 c221bbb0" ; "lv2(2): page fault handler (DSI): invalid access address 0x795d00e8!"'''. | ||
* [[DECR-1400]]: | * [[DECR-1400]]: | ||