Editing Template:HSW-001 pinout
Jump to navigation
Jump to search
The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then publish the changes below to finish undoing the edit.
| Latest revision | Your text | ||
| Line 5: | Line 5: | ||
! On [[Motherboard_Revisions|Motherboard]] !! On [[Switch_boards|Switch board]] | ! On [[Motherboard_Revisions|Motherboard]] !! On [[Switch_boards|Switch board]] | ||
|- | |- | ||
| 1 || {{cellcolors|darkgrey|white}} | | 1 || SW_PWM ? || {{cellcolors|darkgrey|white}} Syscon [[Template:Syscon_pinout_LQFP_128_pins|SW2-30x]], pin 12 || {{cellcolors|darkgrey|white}} 4x CONTOUR LEDs, transistor base pin || {{cellcolors|darkgrey|white}} The transistor is located in the switch board and drives 2 LEDs with currentlimitor resistors of 3K {{ohm}} (red led at left-top) and 820 {{ohm}} (blue led at left-bottom)<br>The circuit has unpopulated pads to add another transistor and another 2 LEDs for a total of 4 LEDs driven by <abbr title="the line is inactive in all known working modes, the leds never emits light because syscon never sends the signal">a misterious syscon pin</abbr> | ||
|- | |- | ||
| 2 || {{cellcolors|#CC3333|white}} | | 2 || +5V_EVER || {{cellcolors|#CC3333|white}} [[Power Supply]] Connector (CN101), pin 1 || {{cellcolors|#CC3333|white}} VCC || {{cellcolors|#CC3333|white}} 5V Standby line from power supply connector CN101, the pin named 5V_EVER on motherboard and 5VSB on power supply | ||
|- | |- | ||
| rowspan="2" | 3 || rowspan="2" | ? || rowspan="2" | Syscon [[Template:Syscon_pinout_LQFP_128_pins|SW2-30x]], pin 11 || 2x White leds - || Inner LEDs for EJECT button backlight, with a currentlimitor resistor of 910 {{ohm}} | | rowspan="2" | 3 || rowspan="2" | ? || rowspan="2" | Syscon [[Template:Syscon_pinout_LQFP_128_pins|SW2-30x]], pin 11 || 2x White leds - || Inner LEDs for EJECT button backlight, with a currentlimitor resistor of 910 {{ohm}} | ||
| Line 13: | Line 13: | ||
| 2x White leds - || Inner LEDs for POWER button backlight, with a currentlimitor resistor of 1K {{ohm}} | | 2x White leds - || Inner LEDs for POWER button backlight, with a currentlimitor resistor of 1K {{ohm}} | ||
|- | |- | ||
| 4 || {{cellcolors|#333333|white}} GND || GND || | | 4 || GND || {{cellcolors|#333333|white}} GND || {{cellcolors|#333333|white}} GND || {{cellcolors|#333333|white}} Ground | ||
|- | |- | ||
| 5 || EJECT_SW || Syscon [[Template:Syscon_pinout_LQFP_128_pins|SW2-30x]], pin 111 || Eject switch {{buttoneject}} || Sink to ground to activate | | 5 || EJECT_SW || Syscon [[Template:Syscon_pinout_LQFP_128_pins|SW2-30x]], pin 111 || Eject switch {{buttoneject}} || Sink to ground to activate | ||
| Line 25: | Line 25: | ||
| 9 || BD_LED || BluRay controller [[CXD5131R-1]], pin 36 (on [[SUR-001]]/[[JSD-001]])<br>''or''<br>BluRay controller [[R8J32830FPV1]], pin ?? (on [[JTP-001]])|| Blue led - || Connects to blue LED located next to the eject switch, with a currentlimitor resistor of 560 {{ohm}} | | 9 || BD_LED || BluRay controller [[CXD5131R-1]], pin 36 (on [[SUR-001]]/[[JSD-001]])<br>''or''<br>BluRay controller [[R8J32830FPV1]], pin ?? (on [[JTP-001]])|| Blue led - || Connects to blue LED located next to the eject switch, with a currentlimitor resistor of 560 {{ohm}} | ||
|- | |- | ||
| 10 || {{cellcolors|#333333|white}} GND || GND || | | 10 || GND || {{cellcolors|#333333|white}} GND || {{cellcolors|#333333|white}} GND || {{cellcolors|#333333|white}} Ground | ||
|} | |} | ||
<noinclude>[[Category:Templates]]</noinclude> | <noinclude>[[Category:Templates]]</noinclude> | ||