Editing Template:DSW-001 pinout

{| class="wikitable"
|+[[DSW-001]] Pinout {{ed right|DSW-001 pinout}}
! rowspan="2" | Pin !! rowspan="2" | Name !! colspan="2" | Connected to !! rowspan="2" | Description
|-
! On [[Motherboard_Revisions|Motherboard]] !! On [[Switch_boards|Switch board]]
|-
| 1 || {{cellcolors|#44cc44|white}} <abbr title="IR Remote Control (input)">RMC_IN ?</abbr> || Syscon [[Template:Syscon_pinout_LQFP_128_pins|SW2-30x]], pin 13 || Testpad || Only This line have a Testpad @ switchboard, seems that it is a service pin.<br>Also connected to a pin of a [[Service Connectors]] ?
|-
| 2 || {{cellcolors|darkgrey|white}} SW_PWM ? || Syscon [[Template:Syscon_pinout_LQFP_128_pins|SW2-30x]], pin 12 || 4x CONTOUR LEDs || Permanently inactive by default.<br />On Switch board is connected to a transistor driving 3 LEDs: TWO BLUE AND ONE RED.
|-
| rowspan="2" | 3 || rowspan="2" | ? || rowspan="2" | Syscon [[Template:Syscon_pinout_LQFP_128_pins|SW2-30x]], pin 11 || 2x White leds, ground pins || Inner LEDs for EJECT button backlight
|-
| 2x White leds, ground pins || Inner LEDs for POWER button backlight
|-
| 4 || POW_SW || Syscon [[Template:Syscon_pinout_LQFP_128_pins|SW2-30x]], pin 110 || Power switch {{buttonpower}} || Sink to ground to activate.
|-
| 5 || EJECT_SW || Syscon [[Template:Syscon_pinout_LQFP_128_pins|SW2-30x]], pin 111 || Eject switch {{buttoneject}} || Sink to ground to activate.
|-
| 6 || POW_LED || Syscon [[Template:Syscon_pinout_LQFP_128_pins|SW2-30x]], pin 5 || Green led || Connects to bottom-left corner pin (green gnd) of dual red/green LED over power switch.
|-
| 7 || STBY_LED || Syscon [[Template:Syscon_pinout_LQFP_128_pins|SW2-30x]], pin 6 || Red led || Connects to top-left corner pin (red gnd) of dual red/green LED over power switch.
|-
| 8 || BD_LED || BluRay Connector, pin 13 || Blue led || Connects to blue LED over eject switch.
|-
| 9 || {{cellcolors|#333333|white}} GND || GND || GND || Ground
|-
| 10 || {{cellcolors|#CC3333|white}} +5V_EVER || [[Power Supply]] Connector (CN101), pin 1 || VCC || 5V Standby
|}
* above top panel view port behind pcb. resistors was not tested.
<noinclude>[[Category:Templates]]</noinclude>